Тёмный
No video :(

How To Cure With A Heat Press and Heat Gun 

The Ink Build Up
Подписаться 4,7 тыс.
Просмотров 9 тыс.
50% 1

Want to know how to cure with a Heat Press or Heat Gun, well today I'll demonstrate how you can do it for your print jobs. This is handy for people who are just starting out and don't have a Conveyor Oven nor a Flash. You may believe it's slow but I'll show how it can be actually a fast process after a little practice. Hope you enjoy.
*****************************************
Hello Amigos, my name is Antonio and I would love for you to follow my journey as I Build Up my Screen Printing Shop from the bottom to the top here in Mexico.
***********************************
Support My Channel
Buy Me A Coffee
www.buymeacoff...
Purchased my new CMYK Separation Photoshop Actions
www.buymeacoff...
PayPal:
www.paypal.me/...
*******************************
Follow and Like:
Facebook: / theinkbuildup
Instagram: / theinkbuildup
My Shop & Video Gear:
--------
Cheap Dual Lasers:
amzn.to/3dCuB49
Yellow Led Strips:
amzn.to/39odjWb
UV Led Strip 60W/ 10 Meters (2 of 5 Meter Rolls)
amzn.to/3412hl9
Timer:
amzn.to/2IFyWTS
50w UV LED Light:
amzn.to/2OF1TDl
Gold Up Aluminum Screens:
amzn.to/2oBOLnH
GoldUp 11 x 17 Films
amzn.to/2Bej72n
SEEKONE Heat Gun
amzn.to/3b2CZWN
12in Aluminum Squeegee 70/90/70 Durometer
amzn.to/30M5SSA
Mini Dehumidifier
amzn.to/2sSHJ09
Set of 4 Squeeges (6.3" / 9.4" / 13" / 18")
amzn.to/30NceAY
Canon Pixma iX6820
amzn.to/2pomj97
Set of 30 Ink Cartridges
amzn.to/2VM2h4c
Set of Squeeges:
amzn.to/2nFMfwr
Laser Temp. Gun:
amzn.to/2q6HexK
Movo Shotgun Mic Smartphone Kit
amzn.to/3gYWylT
Wacom Tablet:
amzn.to/2PAZsCg
My Phone Tripod:
amzn.to/33u9yIV
Or Anything of Amazon, use my Link:
amzn.to/35ubVNm
***********
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#screenprinting #mexico #serigrafia

Опубликовано:

 

29 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 82   
@breacher1345
@breacher1345 3 года назад
Great job. You do very well at explaining what you do, why you do it and your previous concerns. Though you may not have the most expensive equipment or the biggest area to work, you put the effort in to make a quality product. I wish you much success.
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thank you Amigo, I really appreciate. Sorry for the late replied.
@johnboyd9404
@johnboyd9404 3 года назад
Hey man. I’m a musician up in Nashville Tennessee that’s getting into screen printing. Thank you so much for your videos. You are an inspiration.
@TheInkBuildUp
@TheInkBuildUp 3 года назад
I'm glad my videos helped inspired in a way Amigo. Just doing my best to help new beginners.
@dankous5586
@dankous5586 2 года назад
Just what I needed to hear!!! No tengo el espacio nor the money to buy a flash dryer or a conveyor dryer… I’m trying to get started with the screen printing… I already do vinyl and sublimation, so I have the heat press… but there are jobs that are definitely better suited for screen printing, specially when the quantities are higher. Thanks so much for sharing your thoughts and your work 👍 quickly becoming one of my favorite channels 🙏 keep up the good work!!
@alexvancampenhout
@alexvancampenhout 3 года назад
Wow, phenomenal video! Hands down one of the most informative, simple to follow videos I've seen on curing shirts!
@aaronbedell3753
@aaronbedell3753 Год назад
Thank you SO much! my son and I are trying to set up our first prints, I have been working at a printers shop for a bit, and trying to sort out how to do things withour the big ovens etc. a heat gun and a heat press are perfect for us. And a great job showing exactly how to do and explaining it well done. Cheers
@TheInkBuildUp
@TheInkBuildUp Год назад
Glad my video help out Amigo.
@tlopez5069
@tlopez5069 2 года назад
I love the intro and outro with the rooster sound.
@TheInkBuildUp
@TheInkBuildUp 2 года назад
lol. Thanks. Only reason it's there and on the logo is that if you go back to the first videos, I had roosters always interrupting my videos.
@yemarican
@yemarican Год назад
I just started using my heat press to cure the ink today ... BUT... what I did different is that when I close the lid of the heat press after I put the shirt in there .. I keep a gap between the heating element and the ink so they never touch.. gap is about an eighth of an inch .. however .. your way is better because with mine I would have to jack up the heat to about 380 and cure it for about one minute .. I have not test washed them yet but I did the stretch test and they seem fine. I even did that with a 100 percent polyester shirt and she came out so pretty 😋
@Oh-Well-OK
@Oh-Well-OK 3 года назад
Great work man! Loved seeing the full process. Print looks great and your new squeegee seems awesome too!
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thank you Amigo. And yes, the squeegee is awesome.
@UnluckyGorilla
@UnluckyGorilla 2 года назад
Bro I’m out here about to elevate my shirt brand thanks to you, thank you for the awesome info
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Awesome Amigo. And glad my content helps out.
@shawnsderbyden1032
@shawnsderbyden1032 3 года назад
I’ve used the heat press to do a final cure after putting it under the flash
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Yea, that would help a lot to avoid staining the shirt. Better way to avoid those mishaps.
@wardeviIs
@wardeviIs 3 года назад
learned everything i need to know about screen printing from this guy. Huge shoutout to you man.
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Awesome Amigo. Glad my videos help out. 🤘
@Oscar-vg5xe
@Oscar-vg5xe 3 года назад
Nice work Antonio
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thank You
@pereveos
@pereveos 3 года назад
I do almost the Same but i do a flash dry with the heat gun cause i was afraid that heat press will get dirty of ink! (Using teflon sheet know and i thought it will get dirty too)You must replace your screen palette and use a pallete tape .Grate work my friend
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Awesome. And yea, I need to add some pallet tape. Haven't added to this one.i would always tell myself, next time. Lol. Need to do it.
@pereveos
@pereveos 3 года назад
Happy new year my friend
@TheInkBuildUp
@TheInkBuildUp 3 года назад
@@pereveos Happy New Year Amigo.
@josemorales2817
@josemorales2817 3 года назад
Buen trabajo amigazo!
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Gracias Amigo
@superteeprints371
@superteeprints371 3 года назад
nice video antonio great work
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thank you Amigo
@Layman_man
@Layman_man Год назад
Thank you for this video man I really appreciate it!!
@TheInkBuildUp
@TheInkBuildUp Год назад
glad it helped
@ramthebull4604
@ramthebull4604 3 года назад
Keep it going man great videos
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thank You.
@TattooLycansTVPhilippines
@TattooLycansTVPhilippines 2 года назад
Your the best
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Thank You Amigo, I appreciate it.
@LomoPlateAldo
@LomoPlateAldo 2 года назад
Tengo exactamente la misma plancha y pulpo. justo hoy me voy a estrenar con la serigrafía en mi garage y necesito informarme bien cómo secar con la plancha y la pistola. Gracias por el video. espero y tengas el éxito que deseas con tu canal e imprenta.
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Gracias Amigo, y suerte con tu nuevo taller.
@LomoPlateAldo
@LomoPlateAldo 2 года назад
@@TheInkBuildUp pregunta: ¿si me está quedando tinta en el teflón, está curando apropiadamente? is the ink curing well "if" I see ink sticking to my teflon paper?
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Es normal que quede poca de tinta. Solamente le limpias cada rato.
@dylanblack1301
@dylanblack1301 4 месяца назад
Cool video , one question. Could you cure plastisol with a regular iron along with the parchment paper?
@TheInkBuildUp
@TheInkBuildUp 29 дней назад
Sorry about the long replied. And no you can't unless that iron reaches a temperature of around 300-330°F. Which is unlikely for a regular household iron.
@HJ93_
@HJ93_ 10 месяцев назад
With the ink and heat press how/why does it not “press through” to the back if the shirt of the ink is still wet?
@vinim6530
@vinim6530 3 года назад
Nice work broo....How hot is the heat press?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Thanks and it was at 180°C (356°F) but it would reach up to 200°C and I would lower the time by 2 seconds.
@leftylimbo
@leftylimbo 3 года назад
Thx for the tip. How much pressure do you use on the press? When I did it to some navy blue shirts, it made a discolored square, I’m guessing from the heat and pressure. I don’t have a heat sensor so I’m not sure how hot it actually was (although I set it to around 350°F). I was in the middle of a shirt run and my flash dryer quit on me, so I used the heat press in an emergency.
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Can't really say how much pressure it was since this press doesn't have it to adjust it.
@gress923
@gress923 3 года назад
Amigo yo las haria cure todas las camisetas en la heat press por que con la heat gun es mas facil que se te puedan quemar especialmente las camisetas blancas
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Así es, me da miedo con la pistola pero ya estoy estoy perdiendo tener más confianza. Pero la plancha me gusta más ya que tengo 100% confianza que se curo bien.
@michaelkozia7275
@michaelkozia7275 2 года назад
Salute amigo.can I ask a question?
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Go ahead Amigo
@michaelkozia7275
@michaelkozia7275 2 года назад
Salut q tal.first let my congratulat you on the videos.i have lived in Mexico for 8 months. But these was 25 years ago. What a place. The people.....really. in no moment the let my fell like ...your different....or Dat you are not welcome....am from Belgium. I always say to people...even to my kids about the time I had there..so all the best to Mexico. En success to you.so look I have a question about the ink deposet. Am using 230 mesh counts. I knew it seems strange but.....also I wold like to knew about the heat press.....look I can see that you hare busy if we gonna speak few minutes on watsup it's gonna by helpful to my.becuse by meseg only its a bit difficult. I just started.still have much to learn. If you can't it's no problem.thanks for replying anyway. My name is Michael. Am gonna send you my number. Watsup. Muchas gracias. Salut da belgica
@mohammedabdallah9411
@mohammedabdallah9411 Год назад
Hello ink build up ... do u have diy on your 6 colour 1station am a beginner
@TheInkBuildUp
@TheInkBuildUp Год назад
No I don't. I bought this press.
@miguelcadena4422
@miguelcadena4422 3 года назад
AMIGO ANTONIO SALUDOS... Por que no vives en USA ya,...eres ciudadano americano?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Hola Amigo. Y, es una larga historia.
@miguelcadena4422
@miguelcadena4422 3 года назад
@@TheInkBuildUp ok amigo. Mis respetos, saludos y bendiciones. 👋😇👍
@TheInkBuildUp
@TheInkBuildUp 3 года назад
@@miguelcadena4422 gracias Amigo
@reynaldbatul2259
@reynaldbatul2259 2 года назад
Hello I noticed that the second print you did after printing it, you put it directly into the heat press. Does this mean that you don't have to use heat gun anymore to dry it and then put it into the heat press afterwards?
@TheInkBuildUp
@TheInkBuildUp 2 года назад
Yea, you could just place it on the heat press directly after printing it. No need to dry it. It's how I do my prints now. It's a big time saving. At first, I didn't know, and I would dry it, it took forever. But give it a try to see if it works for you. I just recommend you clean your heat press after a few prints because some ink does stay on your heat press.
@reynaldbatul2259
@reynaldbatul2259 2 года назад
@@TheInkBuildUp Thanks. I would probably give it a try. I just saw one video before that you have to make sure that is dried already before heat pressing to it to avoid the paint sticking to the heat press.
@kingscybercafe9583
@kingscybercafe9583 2 года назад
Does the ink not seep through to the back of the tshirt when you heat press it?
@TheInkBuildUp
@TheInkBuildUp 2 года назад
No it doesn't
@khmerfinest_f30
@khmerfinest_f30 3 года назад
What shirt do you use for your print?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Yazbek, 100% Cotton
@lfecustom9474
@lfecustom9474 3 года назад
what was the temp & pressure on the heat press you used to cure for 12 sec?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Can't really say about the pressure but it was at 180°C (356°F) and I would give it 12 seconds but it would reach up to 200°C and I would lower the time by 2 seconds.
@feddielugo7559
@feddielugo7559 7 месяцев назад
Fuck yeah man fuck with your video eres humible you would be a great co worker you give lots of information mi respetos 🤘🏽
@_torito17
@_torito17 3 года назад
What temperature did you use to cure the ink in the heat press
@TheInkBuildUp
@TheInkBuildUp 3 года назад
It was at 180°C (356°F) and I would give it 12 seconds. But it would sometimes reach up to 200°C, and I would lower the time to 10 seconds.
@creativetouch-artcraftdesi9044
@creativetouch-artcraftdesi9044 3 года назад
Hi can I use heat gun to activate glue or hair dryer tack on the pallet instead of flash dryer?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
haven't use that kind of adhesive so I can't really say.
@jrpainters912
@jrpainters912 2 года назад
What settings did you used?
@alexisunderwood1928
@alexisunderwood1928 3 года назад
Are you using plastisol or water based inks?
@TheInkBuildUp
@TheInkBuildUp 3 года назад
I'm using plastisol ink Amigo.
@thazualatochhawng2815
@thazualatochhawng2815 2 года назад
Could you tell me the name of the product which you used to clean the ink?
@TheInkBuildUp
@TheInkBuildUp Год назад
I was using a plastisol ink remover by Easiway
@thazualatochhawng2815
@thazualatochhawng2815 Год назад
@The ink build up thanks a lot,,,is it available at Amazon
@costello345
@costello345 3 года назад
Buenas No te salen trabajos para enviar a Estados Unidos
@TheInkBuildUp
@TheInkBuildUp 3 года назад
En este momento, ya no.
@costello345
@costello345 3 года назад
@@TheInkBuildUp este es mi correo gregorio.castillocaps@gmail.com Yo hago bordado en gorrras y si puedes dame tu correo Talvez pueda hacer unas ordenes contigo de playeras Gracias
@kozalopoxtlli8606
@kozalopoxtlli8606 3 года назад
PORQUE TU CANAL ES EN INGLÉS?, SI ERES MEXICANO.
@TheInkBuildUp
@TheInkBuildUp 3 года назад
Pues crecí en el estados unidos, así que aprendí inglés y el español no lo ablapa tanto. Apenas llegó 10 años aquí en México. Se me haceas fácil ablar tenemas de serigrafía en inglés que el español. Pero si me interesa hacer videos en el español en el futuro, pero si cuesta más trabajo.
Далее
How To Cure A T-shirt Using The Flash
14:51
Просмотров 4 тыс.
CMYK Print | Full Registration Process
38:13
Просмотров 2,1 тыс.
Curing Plastisol & Water-Based Screen Printing Ink
8:22
JBM Design Co. | Flash Dryer vs. Heat Press
12:07
Просмотров 8 тыс.
6 Color Print- Exposing Halftones with the Sun
22:20
Просмотров 1,1 тыс.
How To Get The Best Plastisol Transfers
15:28
Просмотров 44 тыс.
New Screen Printing Method for Beginners and Pros
40:06
Screen Printing White Ink for Beginners Step By Step.
11:51
4 WAYS TO CURE A T-SHIRT. ( SCREEN PRINTING )
8:02
Просмотров 29 тыс.