How to cut an external mitre / outside corner on skirting boards / baseboards.

Подписаться 56 тыс.

Просмотров 1,9 млн

50% 1

How to find and bisect the angle of a corner wall and how to cut the skirting board to suite. Watch till the end for a top tip.
Blog to accompany this video.
spendtimesavemo...
Visit our website for more DIY tips and step by step articles.
spendtimesavemo...
Are you a keen woodworker?
Try the link below. You won't be disappointed.
stsmdiy.tedspla...?tid=track
Comment and let me know how you get on with your project and if my videos helped you at all. After all that's why I make these videos!
If you would like to help to fund this channel and help me to make more and better videos then any donations would be greatly appreciated via paypal or Patreon.
paypal.me/spen...
/ spend_time_save_money_diy
Dewalt mitre saw
amzn.to/2A6eqd7
Irwin sliding bevel
amzn.to/2mFUxjS
Mitre fast glue
amzn.to/2uWsakQ
Framing square
amzn.to/2Lu8AHf
/ spendtimesavemoney
/ spend_time_save_money

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 996

@spendtimesavemoneydiy 5 лет назад

Thanks for watching this video 👍🏼 if you're interested in the other skills that are needed to fit skirting boards then check out this playlist I have put together. ru-vid.com/group/PLXCPne0LP4An5gZoIHk2EDCpdpdcEinPf

@dadageealfred3428 5 лет назад

Good

@dadageealfred3428 5 лет назад

Thanks

@spendtimesavemoneydiy 5 лет назад

Dadagee Alfred glad you liked my video. Thanks for watching 👍🏼

@kenboon1478 4 года назад

@@spendtimesavemoneydiy I've tried this and fits at the top but I'm still left with a gap at the bottom

@spendtimesavemoneydiy 4 года назад

ken boon your walls may be out of plumb. Maybe try chipping a bit of plaster off the bottom!? 👍🏼

@stevenharrison1213 5 лет назад

Hiya mate. I'm a 41 year old apprentice doing an NVQ2. Been a general builder for years so I could already do a bit. The lads I work for are great but it can be a bit hectic at work so blokes like you who make these videos are a great help. Really good video. Pleasure to watch. Cheers

@spendtimesavemoneydiy 5 лет назад

Steven Harrison this is exactly how I show students doing their nvq 2 and diploma level 2. It's how I got taught by a great tradesman. Thanks for watching and be sure to like, share and subscribe to help the channel out 👍🏼

@stevenharrison1213 5 лет назад

I have done mate. Cheers for the reply

@spendtimesavemoneydiy 5 лет назад

Steven Harrison thanks for that 👍🏼

@joewatts7942 5 лет назад

Best explanation I have ever seen, you are good trades man, thanks for sharing, from Newfoundland Canada.

@spendtimesavemoneydiy 5 лет назад

joe watts wow my videos reach all the way to Canada 🇨🇦 great! I'm glad you liked my video! Thanks for watching 👍🏼

@simonm9503 9 месяцев назад

Just done perfect mitre in my living room. All from this video ! Cheers!

@spendtimesavemoneydiy 9 месяцев назад

You're very welcome. Glad my video helped you achieve a perfect mitre 👍🏼

@junglejim13660 5 лет назад

Excellent skills using basic tools. I really like the extra long T bevel you"re using. Great job!

@spendtimesavemoneydiy 5 лет назад

Jimmy Mac thanks. Old school ways are sometimes the best! Thanks for watching 👍🏼

@ScottNicholson1973 5 лет назад

Fantastic video and very helpful as I'm about to skirt my dining room which has 4 external corners thanks to a fireplace and french doors. It's great to see someone showing how to do a job properly, rather than just how to do the job most quickly/easily. Keep up the great work.

@spendtimesavemoneydiy 5 лет назад

Scott Nicholson Thanks for your kind comment. I tend to go for quality over quantity! Thanks for watching 👍🏼

@Cumulous-Clouds 5 лет назад

Thank you! I've watched so many explanations trying to understand how to do these sort of cuts, but none made sense. You explained it perfectly!

@spendtimesavemoneydiy 5 лет назад

Mandy F Thanks for your comment, I try to make my videos so everyone can understand what I do. This method is old school but it has worked for hundreds of years. Thanks for watching 👍🏼

@Dave-tu6kd 6 лет назад

brilliant craftsmanship, finally a foolproof method, thank you.

@spendtimesavemoneydiy 6 лет назад

mac do it's the way craftsman have been doing it for years! Unfortunately recently skills have been lost and speed has taken the place of quality 😔

@richardkearney1928 5 лет назад

@@spendtimesavemoneydiy if the floor runs out of level this will it work do well .I have 40 years experience in the building trade and a carpenter by trade

@spendtimesavemoneydiy 5 лет назад

@@richardkearney1928 thanks for your comment. My videos are designed to help people who are trying to have a go themselves to try to save a bit of money. If I were to cover every aspect and every eventuality and everything that could cause an issue the video would be hours long. I just try to help diyers to do a bit not teach them everything I have learnt over the past 20 years. If you think you could make a better video, send me the link and I will give it a watch. Thanks for watching.

@Dan_C604 6 лет назад

Wow, this is probably one of the best videos. Your work is amazing but I wouldn’t be able to do it so perfectly. You rock.

@spendtimesavemoneydiy 6 лет назад

Dan C If you take your time and do what I do then there is no reason you couldn't achieve results like me! Thanks for the great comment 👍🏼

@EireFirst2024 3 года назад

Your angle bisecting formula is the SIMPLEST way of teaching people, 100 marks out of 10, brilliant buddy 👍👍

@junaidahmed786 3 года назад

Dentists use a similar bisecting angle technique when taking anterior occlusal x rays! I'm going back 25 years when I was in dental school!

@EireFirst2024 3 года назад

@@junaidahmed786 ah sure I knew that 😂

@craigjones4576 3 года назад

Quality this mate... I’m a joiner from Liverpool and Iv never been shown this little beauty, thanks laa 👍

@spendtimesavemoneydiy 3 года назад

Glad I could show you something new, hopefully it will help you out. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@kingmalt 5 лет назад

Your going to put us out of business telling everyone the tips of the trade! 😉 nice job!

@spendtimesavemoneydiy 5 лет назад

king malt thanks for the comment! Nice to get the thumbs up from another carpenter! Thanks for watching 👍🏼

@Jeff-gw1dv 5 лет назад

Brilliant video, thanks for sharing with us amateurs.

@spendtimesavemoneydiy 5 лет назад

Jeff Thanks for that kind comment and thanks for watching 👍🏼

@franklettering 5 лет назад

Tip Top video.!!!! Straight forward without the usual youtube rubbish.

@spendtimesavemoneydiy 5 лет назад

Frank Crossword thanks for the comment. I'm not much of a talker so my videos tend to be straight to the point with no waffle. Thanks for watching and be sure to like, share and subscribe to help the channel out 👍🏼

@franklettering 5 лет назад

@@spendtimesavemoneydiy . .....no probs.!

@spendtimesavemoneydiy 5 лет назад

Frank Crossword thank you 👍🏼

@herjenderlally4795 3 года назад

Fantastic video to watch. Thank you

@robertedwards5184 5 лет назад

I agree with other comments. No silly background music. Straight to the point commentary, well explained. 😄

@spendtimesavemoneydiy 5 лет назад

Robert Edwards Thanks for your comment and thanks for watching 👍🏼

@alexkent2248 3 года назад

That was magic when the mitre came together 🤩

@bmker5469 6 лет назад

So simple when you know how.. great video.

@spendtimesavemoneydiy 6 лет назад

BMk'er Thanks for your comment 👍🏼

@Martial-Mat 4 года назад

Absolutely superb tricks. Just wished it work for someone without the big circular saw.

@spendtimesavemoneydiy 4 года назад

Mat Broomfield try watching this one. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Dy0ycCPH3cc.html

@Martial-Mat 4 года назад

@@spendtimesavemoneydiy Fantastic, thanks. Already a subscriber!

@spendtimesavemoneydiy 4 года назад

Thanks for watching and subscribing 👍🏼

@Martial-Mat 4 года назад

@@spendtimesavemoneydiy Thank YOU for quality content!

@pauls3451 3 года назад

Thanks for sharing this.

@kwanchanoc7776 6 лет назад

Terrific ty !! The parallel lines !! Wow .

@spendtimesavemoneydiy 6 лет назад

Kwanchanoc thanks for your comment 👍🏼

@broderp 4 года назад

Great video, thanks for sharing.

@spendtimesavemoneydiy 4 года назад

Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@MrScall35 6 лет назад

Just came across the channel and subscribed. Great video. Very informative. Thanks for taking the time to put up.

@spendtimesavemoneydiy 6 лет назад

Toffee Abroad Thanks for subscribing! Glad you like my videos!

@mattkiwi222 2 года назад

Thanks so much for this video mate. Saved my bacon!

@joehoward848 3 года назад

Great trick.hats off

@spendtimesavemoneydiy 3 года назад

Glad you enjoyed my video. Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼

@dannymurphy1779 6 лет назад

Thanks for the great lesson, have subscribed. This channel will grow!

@spendtimesavemoneydiy 6 лет назад

Danny Murphy Thanks for the comment! The channel is growing steadily! Just glad people like the content!

@carpentrytipsandtricks6441 5 лет назад

The DW708 😍 god I miss that saw - lasted me 15 years! 😢

@onetonloon9996 5 лет назад

Brilliant video!

@spendtimesavemoneydiy 5 лет назад

onetonloon noolnoteno Thanks for your comment and thanks for watching 👍🏼

@richardfrost6473 5 лет назад

Great carpenter showing how to thanks

@spendtimesavemoneydiy 5 лет назад

Richard Frost thanks for that great comment and thanks for watching 👍🏼

@Jacksonknox834 4 года назад

Well explained easy to follow, keep em coming.

@spendtimesavemoneydiy 4 года назад

Kenny Roxburgh thank you for your comment. Glad you enjoyed my video. Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼

@tantan4662 3 года назад

Wonderful skill and thank you 🤭🤔

@spendtimesavemoneydiy 3 года назад

You're very welcome 👍🏼

@markmywords519 3 года назад

Hi, I am impressed how clear you explained this. Tried my first architrave cut and the procedure worked like a charm. Question please I have an external corner that, bisected, is greater than the 47 degree on my DeWalt compound mitre saw, how is that predicament solved? only need about 4 more degrees.

@romasandsons8690 4 года назад

Nice Cut !

@spendtimesavemoneydiy 4 года назад

Zygi Lelys thank you my friend. Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼

@romasandsons8690 4 года назад

No problem .

@Hushiization 2 месяца назад

PERFECT!

@spendtimesavemoneydiy Месяц назад

Thank you

@Crooks103 4 года назад

Nice work.

@spendtimesavemoneydiy 3 года назад

Thank you and thanks for watching, be sure to like share and subscribe to help the channel grow 👍🏼

@tonydavison3312 5 лет назад

That's well cool!

@spendtimesavemoneydiy 5 лет назад

Tony Davison glad you liked my video. Thanks for watching 👍🏼

@garyslama7163 5 лет назад

Hmm. Great tutorial. Should have watched it before l did my trim.

@spendtimesavemoneydiy 5 лет назад

Gary Slama Thanks for your comment and thanks for watching 👍🏼

@andysawyer3668 5 лет назад

I take a couple of scraps and make them 46 degrees and try them. Then make an angle adjustment off the results (make them 45 and 1/2 or 46 and 1/2 or whatever it is), Then set the saw to that angle not messing with that angle finder square.

@ChrisNobodySpecial 5 лет назад

My method exactly. Also, with my Rigid compound miter, it has a 12" blade and I can cut all angles on most materials without tilting the blade, the only exception being on compound angle cuts. It can cut stock that is 7 3/4" thick/wide. If the angle is slightly acute or obtuse, I wag it a couple of degrees one way or the other and it works out.

@mickydub3 5 лет назад

" GREAT SKILLS " LOVE IT

@spendtimesavemoneydiy 5 лет назад

Micky Dub Thankyou and thanks for watching 👍🏼

@Kris-82 6 лет назад

Wow, great tip!

@spendtimesavemoneydiy 6 лет назад

Kris s thanks for the comment and thanks for watching 👍🏼

@sabestek8896 4 года назад

impressive ..! 😎

@spendtimesavemoneydiy 4 года назад

Thanks for the comment and thanks for watching, be sure to like share and subscribe to help the channel grow 👍🏼

@timdaniels2094 Год назад

Thanks!

@spendtimesavemoneydiy Год назад

Thank you for the'Super Thanks' very much appreciated. All contributions will be going towards a new spindle moulder for the channel. Thanks again 👍🏼

@crazyfrenchfrog007 6 лет назад

great tip ty for sharing

@Welshkiteflyer 5 лет назад

Wow thats awsome.

@spendtimesavemoneydiy 5 лет назад

Ceri Jones wow thanks for that awesome comment and thanks for watching 👍🏼

@jayjohal6892 2 года назад

How did you fix the skirt to that brick wall mate?? Did you use rawl plugs and screws?

@spendtimesavemoneydiy 2 года назад

Here's a link to a video I did, fixing skirting back to brick 🧱 walls. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0oEeYKnfsts.html Thanks for watching and don't forget to like and subscribe to help me out 👍🏼

@bombaydan 5 лет назад

Fantastic

@dreadpirateroberts4052 Год назад

Genius

@webnet15 4 года назад

thx man 4 the info .......know I know how 2 do it myself...........thumbs skywards #141 2 27 20.......

@spendtimesavemoneydiy 4 года назад

webnet15 glad you enjoyed my video. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@valdanowill 5 лет назад

You the master. I would love someone show how to do it without that machine. Mic was low.

@spendtimesavemoneydiy 5 лет назад

Stephen Williams thank you for your comment. I am planning to do a video for a complete guide to skirting boards with no power tools. So watch this space. Thanks for watching and be sure to like, share and subscribe to help the channel out 👍🏼

@valdanowill 5 лет назад

Any suggestion how to do it without a table saw?

@valdanowill 5 лет назад

@@spendtimesavemoneydiy That would be great. Looking forward to it.

@spendtimesavemoneydiy 5 лет назад

Stephen Williams use the bevel to draw the angle on the board and square it around, then cut with a fine tooth saw. If you watch my video on scribing an internal joint on skirting boards it may shed some light on the matter.

@valdanowill 5 лет назад

@@spendtimesavemoneydiy Ok I will try to get the bevel first. Thanks

@explorewithant 5 лет назад

Hi mate,,am I better to lay my new laminate floor before fitting skirting boards

@spendtimesavemoneydiy 5 лет назад

Bond Bondy personally I would so you don't have to put any beading around the edge. Thanks for watching 👍🏼

@explorewithant 5 лет назад

Spend Time, Save Money, DIY cheers that’s what I thought,,keep the good vids coming mate,,,I’ve got shitloads of work to do in my new house 👍

@aminoacids37 3 года назад

I'm struggling with the adjustable ruler to the mitre saw. I've got an evolution mitre saw, only goes 45degrees. Any help please

@alexrae320 5 лет назад

Alex Rae Hi mate. Absolutely fantastic video - just what I was looking for! If you wouldn't mind answering me a question? My chop saw won't go back far enough to cut my 7" Taurus skirting so is there a way around that or can I use your method to select the angle on my circular saw? Thanks in advance!

@spendtimesavemoneydiy 5 лет назад

Alex Rae Hi Alex thanks for your comment! My advice to you is to cut as much on the chop saw as possible and then finish with a hand saw using the cut from the chop saw as a guide! Thanks for watching 👍🏼

@mikesmith-bj7nd 5 лет назад

@@spendtimesavemoneydiy or lay the piece flat and use your square to find the angle left to right

@karlbanks2653 5 лет назад

@@mikesmith-bj7nd Feel free to do a video Mike illustrating your technique and showing how you would then transfer that to your chop saw accurately?? @Spend Time, Save Money, DIY... Great Video! Great tips! Thank you :)) Clear, Concise and without all the BS or Noise. Very much appreciated

@spudmourph73 5 лет назад

Best video I seen on how to work out a non 90 corner, no bullshit or fancy compasses, very well explained, cheers...

@spendtimesavemoneydiy 5 лет назад

spud murphy glad you liked the video! Thanks for watching 👍🏼

@cm5065 5 лет назад

Another suggestion to finding the angle:, Before you start any outside corners, cut some sample blocks with a 45, 45.5 and 46 degree angle. Use them to check your angle at each outside corner as you go. Much faster and fool proof.

@seandanes3945 6 лет назад

This is by far the best video I have ever seen on fitting skirting boards 👏 it's very clear and very well explained. You should have way more subs. Good luck with the channel.

@spendtimesavemoneydiy 6 лет назад

Sean Danes Thanks for the great comment! I have only been making videos since January but the channel is growing steadily! If you feel like sharing I would be grateful 👍🏼

@serge.crispino418 6 лет назад

Absolutely agree !! Well done.

@X7editz16 5 лет назад

Wow

@e13373 2 года назад

Agree. I have watched soo many videos on the subject since I'm doing a home renovation. This is the first time I see the tip on how to transfer the angle to the saw without special angle finders.

@Ismail-Yahya 2 года назад

Agreed!

@nocturnalowl32 5 лет назад

I struggled through half my dinning and front room, then watched this. Wow how easy it is to do when you know the tricks of the trade. Thanks ever so much for posting.

@spendtimesavemoneydiy 5 лет назад

Chris West thanks for your comment. I'm glad my video helped with your skirting boards. A little knowledge goes a long way. Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼

@Yellow.Surgeonfish 4 года назад

Lol!!

@bobsmith1965 6 лет назад

People don't realize what an art it is doing finish carpentry. You are a great example of that. I've had the chance to watch a few carpenters do their finish work and its fun to watch. Great video you're a real craftsman.

@spendtimesavemoneydiy 6 лет назад

Nivek Marshall Thankyou for the kind comments 👍🏼

@besozeshkan 5 лет назад

Don´t be fooled it looks so easy but damn its hard to do!

@stevemorris6855 3 года назад

An old carpenter once gave me these words of wisdom on this subject. "If your mitres do not fit, Fill them up with putty and shit."

@MADMAX-xu5rb 3 года назад

A carpenter also said to me "if you don't have wood ask for my wood"

@rbflooring1 3 года назад

I heard a carpenter once say they were on top of the world

@supertavshan 5 лет назад

yep this bloke knows what he's doing - although it helps to have a fancy chop saw and a sliding bevel -- . Four corner rooms are easy but if you've got to go round an old chimney breast and do external mitres Id get a decent chippy to do it rather than pissing around for days on end bisecting angles, filing off 45 degree mitres than don't fit, cutting mitres the wrong way and generally getting REALLLY ANGRY.

@spendtimesavemoneydiy 5 лет назад

Bill Smith thanks for your comment and thanks for watching 👍🏼

@salmonninja7223 5 лет назад

I'm sitting in my living room staring at a huge pile of skirting that needs fitted in practically every room in the house. I have to thank you for putting this videos up. I was just about to start today and I'd have gone in with a totally different tactic! Your advice has saved me from making a complete arse of the entire job. I'm going to scribe my internal corners instead of angled cuts. It has all become clear now!! Cheers mate.

@spendtimesavemoneydiy 5 лет назад

salmon ninja thanks for your comment and I hope all goes well with your skirting boards. Thanks for watching 👍🏼

@adrianek12102008 2 года назад

In all fairness you CAN angle cut your internal corners too, it will just not allow for much wall imperfections. If your walls are bang on 90 degrees I never had issues angling internal corners. With not so ideal walls, scribing the corner gives a bit of manoeuvre to join them more neatly. With angled cut you’d have to fill the gap with caulk and paint it to hide imperfections.

@JamesGadbury 4 года назад

Great video, thank you. It's really well explained. I'm having a nightmare and have hit a mental block mid job. My double bevel mitre saw only goes to 45 degrees either way. I need approx 46 degrees for my bisected mitre. Can't seem to get the angle on my saw.

@hollow34 Год назад

same

@framing2finish 5 лет назад

Great video. True craftsman. I have a little starret angle finder that does bisects the angle for me, but great to learn how to do bisect without it! I have always bisected with a compass, I like this way, I don't have to run for another tool out of the truck! Great video, thanks for sharing your knowledge!

@spendtimesavemoneydiy 5 лет назад

Brad Callan Thanks for the comment and thanks for watching! I'm glad I could show you a new way 👍🏼

@tilerman 5 лет назад

Fantastic tutorial. And the tip for gluing pieces together first is spot on. If the floor and walls are out of level, as well as the corner not being 90 degrees, impossible to do otherwise. Cheers mate!

@spendtimesavemoneydiy 5 лет назад

Busyboy 42 Thanks for that kind comment, glad I could show you some tips. Thanks for watching 👍🏼

@hayley_michelle21 5 лет назад

What a fantastic video! You have helped me out loads! Keep these videos coming 👍

@spendtimesavemoneydiy 5 лет назад

Colouring Creations thanks for your comment, I'm glad my videos help you! Thanks for watching 👍🏼

@andrewbowman2262 4 года назад

Absolute star you’ve just made my job a lot easier and taken my work quality up a notch.

@spendtimesavemoneydiy 4 года назад

Andrew Bowman so glad you found my video useful. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@GvrnMHardr 5 лет назад

So this was fitting a miter without numbers. Wouldn’t it be much easier to use a Angle finder?

@francisn.m.6101 5 лет назад

This is wonderful,you are so good at your job. I wish to learn more from you.

@spendtimesavemoneydiy 5 лет назад

Francis Buneh de Pelah Thanks for that great comment and thanks for watching 👍🏼

@thomasstudd6693 4 года назад

Brilliant, thank you, I've been struggling with a 45 degree guide cutter and to much filler.

@spendtimesavemoneydiy 4 года назад

Thomas Studd hopefully this will help you and save you money on filler. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@1971dave 3 года назад

buy yourself a line of chords and a pair of dividers,,

@chrishanson6456 4 года назад

Excellent, straightforward, practical tips to make a difficult job easier. Well done and thank you for taking the time to make the video.

@nicholasgibbins4870 2 года назад

Incredibly useful! I’m a pretty skilled DIY-er but these tips can only come from experience!

@spendtimesavemoneydiy 2 года назад

There's no substitute for experience but with my videos I'm hoping people can learn from my experience. Thanks for watching and don't forget to like and subscribe to help my channel grow 👍🏼

@adamwhitby4168 4 года назад

As a trainee chippy this video has helped me a lot! Especially with dealing with a non 90 cut. It's something that I haven't been shown properly so I will use your trick next time! You got yourself a new subscriber and I'll be watching more of your videos.

@spendtimesavemoneydiy 4 года назад

Adam Whitby so glad I could show you something you haven't been taught. Although this is quite basic stuff and you should be shown this in college. Thanks for watching and subscribing 👍🏼

@escobarr8818 5 лет назад

Show how you did that inside corner. I've seen the technique before but it would be great to have you explain it in the same detail you did with this outside miter.

@escobarr8818 5 лет назад

Nevermind, just found your other video. Lol

@spendtimesavemoneydiy 5 лет назад

Escobar R lol thanks for watching 👍🏼

@harrybobs4014 5 лет назад

I've learned something today, great tips there. Thank you, now subscribed 👍🏼

@spendtimesavemoneydiy 5 лет назад

Thanks for your comment, thanks for subscribing and thanks for watching 👍🏼

@harrygirgin9093 5 лет назад

Perfectly explained. Very much enjoyed the straight to the explanation. Keep up the good work.

@spendtimesavemoneydiy 5 лет назад

Harry Girgin Thanks for your comment and thanks for watching 👍🏼

@kieranbrummer2212 4 года назад

Genuinely used this method today at work. Was brilliant! Great video and very easy to follow. After fitting a few of these, it all felt very natural. Cheers for the great video, top tips.

@spendtimesavemoneydiy 4 года назад

Thanks for that great comment. I'm going to share it on our Facebook page. Glad my video taught you something. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@beady0081 2 года назад

Great guide mate. Just measured up my first angle and found my McAlister mitre saw will only bevel cut to 45 degrees max I need closer to 50. FFS

@ez3817 5 лет назад

Excellent vid, learnt something new. Thanks

@spendtimesavemoneydiy 5 лет назад

Eric glad I could show you something new👍🏼

@trustnuffin9121 5 лет назад

Genius....Awesome work......absolutely amazed.......thank you !! : )

@Trade920 5 лет назад

Bloody brilliant video

@spendtimesavemoneydiy 5 лет назад

G Man thank you for that great comment! Be sure to watch my other videos on skirting boards. Like, share and subscribe to help the channel out! Thanks for watching 👍🏼

@Trade920 5 лет назад

Spend Time, Save Money, DIY subscribed great channel 👍

@spendtimesavemoneydiy 5 лет назад

G Man thanks for that! Really appreciate the support 👍🏼

@J1bbbb 5 лет назад

Great vidéo. Thanks you 👍

@spendtimesavemoneydiy 5 лет назад

jib4yy you're welcome! Thanks for watching 👍🏼

@2loco 5 лет назад

Swish. Fits like a glove! Well done sire.

@spendtimesavemoneydiy 5 лет назад

A.S thank you sir, glad you enjoyed the video. Thanks for watching 👍🏼

@ThePerpetualStudent 5 лет назад

Yes, i have a question: can you move to the US?

@spendtimesavemoneydiy 5 лет назад

Perpetual Student Haha we go on holiday to Florida every 2 or 3 years and I have often thought of moving there. Thanks for watching 👍🏼

@broadband1820 5 лет назад

Excellent vid mate, thank you 👍

@spendtimesavemoneydiy 5 лет назад

Alan Macartney thank you for that great comment! Be sure to watch my other videos on skirting boards. Like, share and subscribe to help the channel out! Thanks for watching 👍🏼

@kartnkrazy 5 лет назад

Thanks for a great video - some good tips there!

@spendtimesavemoneydiy 5 лет назад

kartnkrazy you're welcome! Be sure to check out my other videos on skirting boards. I'd appreciate it if you could like, share and subscribe. Thanks for watching 👍🏼

@dponting100 5 лет назад

Awesome video. Thanks for sharing your expertise.

@spendtimesavemoneydiy 5 лет назад

Daryl Ponting Thanks for your comment and thanks for watching 👍🏼

@marcusgarvey7695 5 лет назад

+Spend Time, Save Money, DIY : why didn't you show and illustrate the cutting of the inner corner line. Can it also be cut using the circle saw or you need a hand saw to cut it ? I suggest and request you show that in your next video illustration. Otherwise thanks for your skills, time and sharing.

@matthewwhite8252 4 года назад

Fairplay this bloke is s**t hot at his work amazing

@spendtimesavemoneydiy 4 года назад

Matthew White Thanks for the compliment. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼

@matthewwhite8252 4 года назад

No problem mate thanks for the video helped me out :)

@matthewwhite8252 4 года назад

No problem mate thanks for the video helped me out :)

@donr2686 5 лет назад

Nice old school method, why not just use digital angle finder and split the number, much faster. Could never make money working like this.

@spendtimesavemoneydiy 5 лет назад

donald ritger Thanks for your comment. This video is aimed at diyers to show them how it's done. There is always another way but this is the way I do it. And there is more to life than making money 💰!!! Thanks for watching 👍🏼

@MarkMiller-zm2th 6 лет назад

Great tip mate. Thanks, that’ll help me right out.

@spendtimesavemoneydiy 6 лет назад

Mark Miller glad I could help! Thanks for watching 👍🏼

@planetyes 5 лет назад

I used this tip for stashing my drugs behind my skirting. I haven't been nicked in over 7 months. Cheers, mate.

@spendtimesavemoneydiy 5 лет назад

Planetyes hahaha but now you have told everyone where your stash is! You'd better find another hiding place before they get taxed 🤣

@fernandohurtado5040 5 лет назад

😂😂

@arviehannigan531 5 лет назад

Planetyes fool!

@davewurth5693 5 лет назад

Absolutely hilarious! Best reply by far!

@pickledfetus4769 5 лет назад

That’s genius

@scottwilson6467 2 года назад

Easiest method of installing skirting board - Call a carpenter ! 😂😂😂

@katastrophenschutzwa 5 лет назад

From another chippy. Far too long winded. Buy a digital angle finder to use in conjunction with your chop saw. Easy.

@spendtimesavemoneydiy 5 лет назад

katastrophenschutzwa you miss the point my friend! This video is aimed at diyers who are trying to save money by doing the job themselves. There is always a different way and numerous people have said to buy an angle finder but this is the way I was taught and it's never let me down! Thanks for watching anyway 👍🏼

@katastrophenschutzwa 5 лет назад

I appreciate your time spent showing others. I guess it’s too easy to think your own way is always the best. 😳sorry. 👍

@spendtimesavemoneydiy 5 лет назад

katastrophenschutzwa It's always easy to criticise! Thanks for your reply 👍🏼

@shalomdiy9735 Год назад

As a DIYer, this video is PERFECT. explains everything so precisely. Thank YOU

@MrBigMalT 5 лет назад

You sir are a genius! I’ve seen other vids which use a compass to bisect the angle, but your system is so much easier. Absolutely brilliant, and very clearly explained. Great job 👍

@spendtimesavemoneydiy 5 лет назад

Mal Tyrer thank you but I'm no genius! This method is old school. Craftsmen have been using this method for hundreds of years just without the power tools 😂. It's only recently people think they need all kinds of fancy gadgets to do jobs. This is the way I was taught by a real craftsman and it's always worked for me! Thanks for watching 👍🏼

@markoasdadriver6285 5 лет назад

Wow it's so simple, I'll still fuck it up. Great vid👍

@Adrian-qr9mu 21 день назад

Hi. Have a big job fitting skirting in my daughter's Reno soon. I have your vids on speed click to help me accomplish this. Oh and thanks for all your vids, they're very well presented. Cheers

@spendtimesavemoneydiy 7 дней назад

Glad you're finding my videos useful. Let me know how you get on with your daughters reno 👍🏼

@toonmag50 2 года назад

Outstanding work ,makes my monkey DIY work look a shambles . But..... I'm non the wiser as I can't understand how you got the perfect angle with your pencil markings. Dark arts of the professional eh? My work standards are based on my old mother's assessment - a man on a galloping horse will never notice. I

@spendtimesavemoneydiy 2 года назад

Thank you. I'm sure with some practice your monkey DIY will be as good as mine. Thanks for watching and don't forget to like and subscribe to help my channel grow 👍🏼

@HIGHzONzLIFE 3 года назад

Hello! Would you mind saying where that skirting board is from / what it's called - it's perfect :)

@spendtimesavemoneydiy 3 года назад

It is one I make myself but it's a standard profile for a spindle moulder if you can find a joiners shop that would make it for you. Thanks for watching and don't forget to subscribe 👍🏼

@mikez9390 4 года назад

Holy mother of god, must take u ages to to finish a job working like that, not that it’s bad, just obsolete, maybe take some pointers from finish carpentry tv, he tends to have similar methods to us which it at least 10 to 20 times faster than this

@spendtimesavemoneydiy 4 года назад

mike z thanks for your comment. The purpose of this video isn't to show off how fast I can do it or how much money I can spend on a gadget to help me do it. My aim with this video is to show DIYers the traditional way to do it that works every time. In my experience quicker isn't always better, quality over quantity for me. Thanks for watching anyway and be sure to like share and subscribe to help the channel grow 👍🏼

@FugitiveRazor 2 года назад

Wish this fella was in Nottingham dam I've had so called joiners who can't cut mitres for sht and want £200 a day

@spendtimesavemoneydiy 2 года назад

Prices are going up and quality is going down it seems with some trades. Thanks for watching and don't forget to check out my other videos and subscribe to help my channel grow 👍🏼