How to Design a PCB from Scratch with EasyEDA | COMPLETE Tutorial | JLCPCB LCSC ALIEXPRESS | 2024

Подписаться 6 тыс.

Просмотров 190 тыс.

50% 1

In this week's episode of tech Tuesday we would look at how to design a PCB with EasyEDA. This video is mainly focused on how to go from having a schematic diagram to PCB.
From Idea to Schematic to PCB - How to do it Easily | How to Design a PCB easily with EasyEDA & JLCPCB - Complete Tutorial | Printed Circuit Board Design - Beginner Step by step 2024
Link to FL5150 data sheet here : www.mouser.com/datasheet/2/14...
----------------------------------------
Channel Gear and Equipment's (Affiliate)
Amazon : www.amazon.com/shop/nerdbishop
AliExpress
~~~~ Multimeters ~~~~
UT61E Plus Multimeter
s.click.aliexpress.com/e/_Dkm...
UT204 Plus Clamp Multimeter
s.click.aliexpress.com/e/_DB4...
~~~~ Lab Bench Power Supply ~~~~
RD6018W 60V 18A Bench Power Supply
s.click.aliexpress.com/e/_Act4hO
~~~~ Oscilloscope ~~~~
DSO FNIRSI PRO Oscilloscope
s.click.aliexpress.com/e/_DBN...
~~~~ Soldering and Welding Kit ~~~~
KSGER T12 STM32 V3.1S Electric OLED Soldering Station
s.click.aliexpress.com/e/_DCG...
DH30 Max Portable Battery Spot Welder Kit
s.click.aliexpress.com/e/_Ddb...
~~~~ Testers ~~~~
USB Adjustable Discharge Load
s.click.aliexpress.com/e/_9HFFwe
RD UM34C USB Tester
s.click.aliexpress.com/e/_9H0yI0
USB Tester with Current Voltage Indicator
s.click.aliexpress.com/e/_9frmaK
Qualcomm QC2.0 & 3.0 | 5V / 9V / 12V / 15V / 20V Trigger
s.click.aliexpress.com/e/_DBK...
~~~~ Others Tools ~~~~
Xiaomi Mijia Screw Driver Kit
OLD Version s.click.aliexpress.com/e/_DmO...
NEW Version s.click.aliexpress.com/e/_Dlc...
NEW Electric Version s.click.aliexpress.com/e/_DDb...
Non-slip Metal Scalpel Knife Set with 40 Blades
s.click.aliexpress.com/e/_AmSdJe
----------------------------------------
There would be two other video parts later on that would be focused on how to order the pcb from JLCPCB, acquire the parts needed for the pcb developed in this video from LCSC and ALIEXPRESS and finally how assemble the parts and test the final product. PCB from schematic | schematic to pcb | pcb design software | pcb design tutorial for beginners
Hope you learn something new, cheers!!!
Kindly support us on patreon here: / delali
Don't forget to LIKE, SHARE and SUBSCRIBE
Follow us @diydelali on Facebook, Twitter and Instagram
Channel Theme Song: Entire by Quincas Moreira
#pcb #easyeda #jlcpcb #lcsc #esp8266 #nodemcu #arduino #wifi #repeater #delali #design #innovation #maker #diy #science #technology #stem #designthinking #electronics #electricity #hobbyist #enthusiast #stayhome #staysafe #wifirepeater #hack #espressif #microcontroller #embedded #embeddedsystems #software #wiring #schematic #routing #track

Хобби

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 355

@Terragea 2 года назад

@Delali, I was considering paying $90 for a Udemy EasyEDA course. With your two excellent videos, I think I can skip that for the moment. Looking forward to more videos!

@Delali 2 года назад

Thanks so much for your kind words. I really appreciate them. I will surely work on more videos like this. Comments like yours inspire me alot. Cheers!!

@pakfones Год назад

So should show your support to @Delai by donating a cup of Tea, I already subscribed as a support for his hard work.

@mauriceaz4201 3 года назад

Definitely one of the best video I ve seen. No loud music, very clear explanations, and nice tutorial. Very professional!

@Delali 3 года назад

Thanks fam. Much appreciated. Kindly don’t forget to subscribe. Cheers!!

@nithinsai2250 3 года назад

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@mikesmuseum 3 года назад

This video delivers. So many tutorials fail to go into detail concerning placing and connecting a Via, changing the Track width, changing layers, and other little things that come up while laying out a board. This is truly a 'start to finish' type video. I sure appreciate your in-depth explanations.

@Delali 3 года назад

Thanks for the kind words fam. Comments like yours inspire me and lets me know to keep up the good work. I appreciate you taking the time to let me know your thoughts. Happy New Year Fam.

@nithinsai2250 3 года назад

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@diydixit 5 месяцев назад

This is the only video someone needs to watch to make a pcb . To the point and all tiny details are given . Just amazing.

@roguetimz 5 месяцев назад

Sabi boy Africans can’t disappoint. Very clear and concise explanation. Thank you for this man

@woutdezeeuw1604 2 года назад

An easier way of adding via's is to simply draw a track on the top layer, and when you encounter an obstacle, you click to create another node where you want the via to be, and then switch to the bottom layer, and it will automatically create a via for you right where your last node is. Then you keep on making your track on the bottom layer, and when you want to switch back, you switch to the top layer again, and it will create the second via. Not sure if this is a new feature that wasn't available back then, but in the current version it works like that. Thanks for the great video!

@Delali 2 года назад

This is an eye opener for me and hopefully a lot of people. I didn't know what you just explained exist until just now. I tried it and it works just as you mentioned. Thanks so much. I'm gonna make another EasyEDA video and use this new approach in it together some other new tricks I've picked up. Thanks so much once again fam. Much Love💗

@DaveDickens Месяц назад

Great video, thank you!

@user-io8rh2sq4y 5 месяцев назад

Amazing tutorial to follow!

@jefftoll604 Месяц назад

Awesome EasyEDA tutorial. Thanks.

@stefanlammert6400 3 года назад

This tutorial is very interesting and comprehensive. After watching I've been able to design my first pcb. :-) Thank you very much.

@Delali 3 года назад

Amazing. Thanks for the kind words. Please dont forget to subscribe for more. Cheers!!

@jeevakkuwar 3 года назад

Now This is what any tutorial should be like. Nicely done, very thorough.

@Delali 3 года назад

Glad it was helpful! I'm really inspired by your comment. Merry Christmas fam. Please don't forget to subscribe!

@hebl47 3 года назад

Thank you so much for this video! You saved me so many hours trying to figure out things myself (and some I would never have known they exist - like changing the model type). Also I think the pacing of the video is just right.

@Delali 3 года назад

Thanks for the kind words fam. Comments like yours keep me inspired. Really appreciate your effort to write your experience. Cheers!!! Please dont forget to subscribe.

@alistairmurray626 Год назад

Just what i was looking for! Thanks! :D

@Delali Год назад

Glad I could help! Kindly let me know how your designs go. Please don't forget to subscribe. Cheers!!

@souflikar6702 3 года назад

Thank you for taking the time to share this. What a great application and a wonderful tutorial! Thanks again.

@Delali 3 года назад

Thanks for the kind words friend. I'm glad this video of could help. Please dont forget to subscribe for more. Cheers!!

@armin.hierstetter 2 года назад

Awesome video - exactly what I was looking for. A quick overview of the whole process. Subscribed!

@Delali 2 года назад

Awesome, thank you! You're the best. I'm also glad this video was of help.

@RestoreTechnique 2 года назад

Amazing tutorial, so helpful! Great teacher 👏

@Delali 2 года назад

Glad it was helpful! I appreciate your comment fam. Merry Christmas.

@Prof.JesusPalacios 2 года назад

Great video!

@Delali 2 года назад

Glad you enjoyed it. Thanks so much. Please dont forget to subscribe. Cheers!!

@TheQuasarman 3 года назад

Excellent tutorial, very clear and one of the best I have seen. Thank you very much!

@Delali 3 года назад

Wow, thanks! Glad it was helpful fam. Happy new year to you. Please dont forget to subscribe.

@datech6274 3 года назад

This is wonderful! Thanks very much for this.

@Delali 3 года назад

You're welcome fam. Am glad you like it.

@victorokechukwu315 7 месяцев назад

Thanks for this video, very professional

@davidc9441 2 года назад

Great vid. Just the right level of detail. Thank you

@Delali 2 года назад

Glad you liked it! Thanks for the feedback. Please don't forget to subscribe! Cheers!!

@MrMaxximus77 10 месяцев назад

Your explanation is really super straightforward and above all understandable. Thanks a lot!

@Delali 5 месяцев назад

Thank you so much. Glad it was helpful! Feedback like yours is why i keep making videos❤️ Please dont forget to subscribe. Cheers!!

@odb7393 2 года назад

Excellent tutorial! Thank you!

@Delali 2 года назад

You're very welcome! Please don't forget to subscribe! Cheers!!

@andreeaedwards-jeanaugusti3670 Год назад

great video and explanation!

@Delali Год назад

Thanks so much. Glad you liked it! Please don't forget to subscribe. Cheers!!

@matthewjerdidahhansen7331 3 года назад

Bro this is very comprehensive ... you make engineering feel easy and understandable

@Delali 3 года назад

Haha. I try. Thanks for the kind words brother.

@TomTom-ty5ej Год назад

Fantastic! I learned much!

@Delali 11 месяцев назад

I'm glad you found this video helpful. Please don't forget to subscribe!

@Lyndon_K Год назад

Great job on the video, it was very well done. Thanks very much and Salome!

@Delali Год назад

Thanks for the kind words. Glad you enjoyed it! Please don't forget to subscribe. Cheers!!

@karlvalgeirjonsson2810 3 года назад

Best understandable video I have seen. Thank you for a very audible tutorial. I learned a lot.

@Delali 3 года назад

Thanks for the kind words Karl. I'm glad this video was of help. Please don't forget to subscribe. Thanks very much. Cheers!!

@eddiejones8709 2 года назад

Fantastic video. I definitely learned a great deal from your presentation. I am looking forward to other videos. Thanks again for all your efforts.

@Delali 2 года назад

Glad it was helpful and thanks for the kind words. I appreciate you taking the time to leave this comment. Have a good one.

@dcallaway0604 3 года назад

Outstanding! Thank you

@Delali 3 года назад

Thanks for the kind words. Cheers!!

@isaacatia-abugbilla2476 4 года назад

Wonderfully done.

@Delali 4 года назад

Thank you! Cheers!

@megatronmike1334 3 года назад

Much love brother I've learned exactly what I needed you are a God send, Best tutorial I've watched , subbed and thumbs up looking forward to checking out your other content!

@Delali 3 года назад

Awesome, thank you so much!

@joejones3201 2 года назад

I was window shopping and I passed through this and I watched it and watched until I start to feel like an engineer...You r Jesus I was blind now I can see...thanks a lot...Im from Zim in Uk

@Delali 2 года назад

Thanks so much for watching and also for the comment. Hello Joe, nice to meet you. I'm from Ghana.

@David.AVelez 4 года назад

Now THIS is thorough. Kudos, Delali! You are an awesome resource for any Programmers looking to build. Great Job! #Whatsappsquad!

@Delali 4 года назад

Wow, thank you!

@Sarahbuildsstepsequencers 2 года назад

THANK you SO much for this helpful tutorial! It’s exactly what I need because I don’t know how to do this. I can’t wait to get started with my project! On my channel, I show my DIY step sequencers. This will make building them so much easier! Thank you, thank you!

@Delali 2 года назад

You are so welcome! Some cool videos you got there.

@yusy4501 4 года назад

great tutorial!

@Delali 4 года назад

Glad you think so! much greatful.

@hirnamputierter 3 года назад

Thanks for sharing your knowledge! Great video 😀

@Delali 3 года назад

Glad it was helpful! Please don't forget to subscribe. Merry Christmas!

@geeuk Год назад

Thank you, brother! Very helpful video. Great teacher you are.

@Delali Год назад

Thanks so much for the kind words. Merry Christmas and happy new year in advance. Cheers!!

@design8studio 11 месяцев назад

Wow, great video. Thank you.

@Delali 11 месяцев назад

Glad you liked it! Please dont forget to subscribe! Cheers!!

@Dirt33breaks Год назад

Brilliant video!!

@Delali 11 месяцев назад

Glad you liked it! Please don't forget to subscribe!

@mywschool8910 2 года назад

Helpful video. Thankx.

@Delali 2 года назад

Glad it was helpful! You're the best. Please dont forget to subscribe. Cheers!!!

@user-hu8cn9uj4t 3 года назад

Appreciate so much. Very well organized tutorial.

@Delali 3 года назад

Thanks buddy. Please don’t forget to subscribe. Cheers!!

@rodcallison9245 3 года назад

Excellent tutorial. Helped me a lot in getting started.

@Delali 3 года назад

Glad it helped. Kindly dont forget to subscribe. Cheers!!

@alexgreen121 Год назад

@Delali, thank you very much this tutorial is excellent it answer all my questions and showed me how to it properly. Thank you!!!!

@Delali Год назад

Im happy this video was helpful to you. Thanks for the feedback fam. Please dont forget to subscribe.

@ryanmckenna2047 2 года назад

Great video man!

@Delali 2 года назад

Thanks so much. I'm glad you like it.

@wteelev 2 года назад

This was an awesome tutorial. Thank you.

@Delali 2 года назад

Glad it was helpful! You are very welcome. Please don't forget to subscribe. Cheers!!

@JohnGin. 3 года назад

Hi Delali, many thanks for this video! Mainly thanks to it, I learned to use EasyEDA a bit and I created my first PCB in one day :-) Before that I tried KiCad and Eagle, but without success. One tip - as I found out, the track through the bottom layer can be made easier - just start on the top layer, after clicking to the point where I want to have a Via switch to editing the bottom layer, continue the track to the next via place, switch back to the top layer and complete the connection. The vias are created completely automatically :-)

@Delali 3 года назад

Am very happy to hear your success story. Am glad this video was of help to you and thank you very much for the tips. I will try to put that in my next video. Please dont forget to subscribe.

@lifewithkingsley6698 Год назад

you're doing great bro, thanks.

@Delali Год назад

Thank you bro. I appreciate that! Please dont forget to subscribe. Cheers!!

@maks1o 2 года назад

Thank you. Subscribed!

@Delali 2 года назад

Thanks for the sub! Happy new year buddy.

@barbomonaretta8261 7 месяцев назад

Thank you very much for this excelent tutorial.

@Delali 5 месяцев назад

Glad it was helpful! Please dont forget to subscribe. Cheers!!

@ibtissemameur3302 8 месяцев назад

Thank you for this lessons! a very interesing video .

@Delali 5 месяцев назад

Glad it was helpful! Thanks for the kind words and for the feedback. Please dont forget to subscribe. Cheers!!

@pauludrea4082 Год назад

Thank you Delali. Very well explained in a logical sequence.

@Delali Год назад

Thanks so much for the feedback.' Comments like yours keeps me going. Merry Christmas and happy new year in advance. Cheers!!

@frankdearr2772 11 месяцев назад

great, thanks for sharing 👍

@Delali 11 месяцев назад

Thank you too. Cheers!! Please don't forget to subscribe!

@illukpitiya 4 года назад

That was a very nice Video, I learnt a lot. Thank you !

@Delali 4 года назад

Glad it was helpful! Thanks for watching. Kindly check out our other videos, maybe you'd find something you like

@vornamenachname1796 2 года назад

Thank you very, very much. This is the Video i needed !!! 👍 greetings from germany

@Delali Год назад

Glad it was helpful! Danke sehr Please don't forget to subscribe. Cheers!!

@gregologynet 3 года назад

Thank you, this is great and exactly what I was looking for. I was getting really confused trying to work this out by myself and you made it easy

@Delali 3 года назад

You're very welcome fam. Glad it helped! Please dont forget to subscribe. Cheers!!

@nithinsai2250 3 года назад

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@danielofoe337 3 года назад

Thank you boss .You are God sent

@Delali 3 года назад

So nice of you. Please don't forget to subscribe. Cheers!!

@Bianchi77 Год назад

Cool video, thanks :)

@Delali Год назад

Glad you liked it! Please dont forget to subscribe.

@husainmanu5664 2 года назад

very use full thanks

@Delali 2 года назад

Happy to help. Please don't forget to subscribe. Cheers!!

@mahlonkarpaiya252 Год назад

Trying my hardest to learn how to make pcbs. Everything is easy when you know how. Your vid helped me the most so far. Well explain

@Delali Год назад

Glad I could help! Thanks so much for leaving feedback. Much appreciated. Please dont forget to subscribe. Cheers!!

@balajibg1537 2 года назад

Very nice tutorial, able to quickly learn how to create pcb. Thanks a lot for explaining clearly.

@Delali 2 года назад

Glad it was helpful! I appreciate your comment. Please dont forget to like and subscribe. Cheers!!

@robertbigott9742 Год назад

Great job. I have a 20 yr old BSEET degree and with out a doubt your presentation was one of the most technically accurate, and effectIive presentations that I have come across. Keep up thr fantastic work. I am now a new subscriber.

@Delali Год назад

Wow, thanks! Thanks so much for your kind words. I really appreciate you taking the time to leave this feedback. Here's my Instagram handle @nerdbishop. I would love to be friends. cheers!!

@md.torikolislam3855 3 года назад

The Best video tutorial I have ever seen

@Delali 3 года назад

Thanks for the kind words brother. I appreciate you taking the time to leave this comment. You're the best. Cheers!! Please dont forget to subscribe.

@Rocksetta 2 года назад

Nicely done.

@Delali 2 года назад

Thanks for the visit and kind words. I appreciate you taking the time to leave a comment. Cheers!!

@techtinkerin 2 года назад

This is by far the best video on easyeda 😃 liked and subscribed!!

@Delali 2 года назад

Thanks so much for taking the time to leave this comment. It means so much to me fam. You're the best. I really appreciate your efforts.

@bobriscione2904 3 года назад

Thank you very much! this is so useful, and now I have a good, working PCB. Thanks!

@Delali 3 года назад

Thats amazing fam, Thanks for the kind words. Please dont forget to subscribe. Cheers!!

@nithinsai2250 3 года назад

buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?

@aripjamaludinrumi Месяц назад

thanks , the schema seems similary to my needs.

@umairarshad8541 3 года назад

Easyeda is a great software. Strongly recomended.

@Delali 3 года назад

Indeed it is. Really appreciate the support brother. Keep up the great work

@josiahadesola 2 года назад

Excellent video

@Delali 2 года назад

Thank you very much! Please don't forget to subscribe. Cheers!!

@kofirobert64 3 года назад

Very well explain. Thank you

@Delali 3 года назад

Glad it was helpful! Kindly check out some of the other videos on the channel. Cheers!

@leoncloete1441 4 года назад

Thank you !

@Delali 4 года назад

You're welcome! Thanks for watching. Hope this video was helpful?

@AbidemiAAjayi 3 года назад

Nice job. Very clear explanation.

@Delali 3 года назад

Glad it was helpful! Really appreciate you taking the time to leave a comment. Please dont forget to subscribe. Cheers!!

@NikolayAntipov 3 года назад

Thanks for the video. That perfectly fits to my level in this area. Looking forward to watching more content on your channel.

@Delali 3 года назад

Glad it was helpful! I will do my best to keep more coming. Happy new year fam. Please dont forget to subscribe.

@NikolayAntipov 3 года назад

@@Delali Thanks! Happy New Year too!!! Yes, already subscribed :-). Keep doing great stuff!!! All the best and stay healthy!

@Delali 3 года назад

@@NikolayAntipov Awesome. Thanks fam. Take care

@paulrobinson5490 4 года назад

Very nice tutorial and nicely explained, enjoyed watching this and learned some useful stuff. Thanks for your time on this, stay well :)

@Delali 4 года назад

Glad this video was helpful. Thanks for taking the time to watch. You rock :-)

@anokhautomation4453 2 года назад

Very very useful 👍

@Delali Год назад

Thanks a lot. Please don't forget to subscribe.

@tettehedemmalvinebenezer8956 4 года назад

Great work bro

@Delali 4 года назад

Thanks for watching. Hope you learnt something

@EdwardPie 3 года назад

Nice work

@Delali 3 года назад

Thanks fam.

@mrkewi1 11 месяцев назад

nice. thanks

@Delali 11 месяцев назад

Thank you and welcome. Please don't forget to subscribe! Cheers!!

@yossepbinyoum2181 11 месяцев назад

As a beginner thank you i learn a lot

@Delali 11 месяцев назад

You’re welcome 😊 I'm glad you found this video helpful.

@shehzadshaikh2427 3 года назад

brother it was a very nice and exicting vedio may Allah bless you thank you so much

@Delali 3 года назад

So nice of you. Thanks for the kind words. Please dont forget to subscribe. Cheers!!

@3cm648 3 года назад

So clear tutorial. Learned from this video. Thank so much and keep it up ! Cheers bro.

@Delali 3 года назад

Happy to hear that! Thank you. Please dont forget to subscribe.

@Delali 3 года назад

@@3cm648 thanks. i would check your channel out.

@3cm648 3 года назад

@@Delali thans Delali

@FeuFabricio 3 года назад

This guy is a legend! Thank you!

@Delali 3 года назад

Really appreciate you taking the time to leave this comment. It keeps me inspired and lets me know my work helps people out there. Cheers!!

@FeuFabricio 3 года назад

@@Delali Just ordered my first PCB!! Thanks again. By the way, if I may, I would suggest a video about the SMT assembly process.

@Delali 3 года назад

@@FeuFabricio Thanks for the suggestion fam. I really appreciate your effort to share. I will look into that. Please don't forget to subscribe. Cheers!!

@malinirobby2916 4 года назад

Nicely explained

@Delali 4 года назад

Thank you so much 🙂

@ErCanEverything 2 года назад

Good video thanks for sharing👏🤝🤝🤝

@Delali 2 года назад

Welcome 👍 Thanks for the feedback.

@edwardagyekumhene3410 4 года назад

nice video bro . would like to learn more. of it.

@Delali 4 года назад

Thanks bro. Stay in touch for part 2 and 3

@ABrokenLink 3 года назад

Excellently explained. Would love a follow up on the pcb

@Delali 3 года назад

Glad you like it. PCB video is still in the works. Kindly Subscribe to stay in touch.

@pecilijevelicanstveni4973 2 года назад

Thank you for this lessons! One small tip: when there are unused pins or something similar that do not need to be connected, just put the "NC - not connected" mark. That is sign "X" from the "Wiring Tools" toolbar and there will not be such warning.

@Delali 2 года назад

Thanks so much for the tip. I really appreciate it. I'd do well to add that in my next pcb tutorials. Merry Christmas and happy new year fam.

@pecilijevelicanstveni4973 2 года назад

@@Delali 👍👍👍

@gabrielpinedo3120 2 года назад

Your video help me a lot to understand how to use vias, thanks a lot for share information with us :-)

@Delali 2 года назад

Glad it was helpful! I appreciate you taking the time to leave this comment🌹 Please don't forget to subscribe. Cheers!!

@rich2956 3 года назад

Nice introduction.

@Delali 3 года назад

Thanks fam. Hope this video was of help!!! Cheers!

@naderhumood1199 2 года назад

Great vedio Sir....deligintly and aptily very informative.....thanks v much. I'm sending you a suloute from Kingdom of Bahrain 🇧🇭

@Delali 2 года назад

Thanks for the kind words. Much appreciated fam. I salute back from Ghana.

@Bhalufixer 6 месяцев назад

Thanks

@Delali 5 месяцев назад

You're welcome. Please don't forget to subscribe. Cheers!!

@eddyboh2723 5 месяцев назад

Nice video! One question how do you add more layers to your PCB?

@mahlonkarpaiya252 Год назад

Thank you in the name of JAH

@Delali Год назад

You are welcome mi breda. Thanks for watching.

@moinshaikh6684 3 года назад

I got the tutorial for I which i was looking... Very nice & helpful tutorials. Sir please keep it up.

@Delali 3 года назад

Thank you very much Moin Shaikh, Glad i could be of help.

@Delali 3 года назад

Please dont forget to subscribe to stay in touch. cheers!!

@adammm142 3 года назад

Great tutorial! One of the best ones i have seen! Don't you have to make connections between ground pins/pads and the ground plane? Will the pads be connected automatically to the Copper area? I am currently working on my first PCB, which is going to be for a guitar compressor pedal.

@Delali 3 года назад

I connected the ground pins and pads together using a ground net. Kindly see 25:48 of the video for reference.

@Bawamaur 3 года назад

Very nice bro

@Delali 3 года назад

Thank you. Please don't forget to subscribe.

@michaelobi5347 2 года назад

Thank you so much for your quick answer whenever I ask a question. Sir how do I uncover a trace from solder mask using EASYEDA? Secondly how do I add solder on the uncovered trace inorder to make it able to carry high current.

@chrispotts2010 4 года назад

Good video, nice and easy delivery. I think you might want to leave a bigger space between high-voltage and low-voyage tracks in any future designs, for anti-tracking and safety. I enjoyed watching this, we'll done and thanks.

@Delali 4 года назад

Thanks for the tips Chris Potts, really appreciate your efforts. Will consider them in my future designs as you advised.