No video :(

How to Diagnose and Repair a Blender

Подписаться 11 тыс.

Просмотров 34 тыс.

50% 1

Did you ever want to know how to diagnose and repair your small countertop appliances? We do just that today with a blender and show you the steps we took to troubleshoot and repair the blender for ZERO Cost.
By the way, we love our Ninja Blender, Food Processor, and Smoothie blender all in one. Heck, this thing can even make flour from wheat berries. amzn.to/3GZWr7e
Don't forget to like and share this video
Please check out our other videos as well and click on the playlist below for a couple we think you may enjoy.
Our Refit Playlist - • S/V DreamChaser leaves...
Our Sailing to New Orleans Playlist - • Sailing Kemah to New O...
Our Epoxy Vs Polyester Fiberglass test results - • Epoxy Destructive Test
Our series on hatches - • How to fix a leaking H...
and Our Series on new Freshwater Plumbing - • How to replace a Boats...
Some of the tools we mention in our videos are:
Inexpensive Chisel set (for rough work) - amzn.to/2M9CZIG
Oscillating Multi-tool - amzn.to/2GtDpWC
Carbide Grinding blade for the oscillating tool - amzn.to/2Gsovnz
Ryobi Skill Saw (I have the corded) - amzn.to/2uKnm5o
The Cordless version is here - amzn.to/2uJwOWA
Small Trim Router (Great for tight places) - amzn.to/2GtkHmd
*Please remember these are affiliate links and it helps us but doesn't cost you more if you buy from Amazon using these links.
Join us on our journey as we continue to rebuild, refit and prepare our Formosa 51 Sailboat for our continued cruising journey. We have always loved the Formosa, bought one (on a bit of a whim) late in 2014, moved aboard this one right away and started to do our refit while living board. We are avid fans of Cruising Outpost and Good Ole Boat (Good Old Boat) magazines and love the ideas we get from them.
Subscribe !!
www.youtube.co...
Support !!
/ svdreamchaser
Lets Connect !! - Daily Instagram Inspiration
- / svdreamchaser
- / svdreamchaser
- / svdreamchaser
- svdreamchaser.t...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@nancytamil714 5 дней назад

Thanks 👍

@Svdreamchaser 4 дня назад

Glad you found it useful and helpful. 🎉

@daviddenzy5046 2 года назад

I had a laugh when I got a notification for this video. This guys does it all!

@Svdreamchaser 2 года назад

Lol. No specific content, whatever I am up to and think someone might find interesting. Lol

@crivitzguy5017 2 года назад

Troubleshooting and repair, a lost art with the younger generation. It does suck when you end up with extra parts though. With cell phones, its less of a chance though...snap a picture here and there or video for reference and you're golden! Nice job! Time to blend up some Margaritas 🍹 😋 🤪

@Svdreamchaser 2 года назад

Yes to the margaritas. We made frozen blue Hawaiians yesterday. Good stuff!

@crivitzguy5017 2 года назад

@@Svdreamchaser Mmmm, my favorite!

@kyakeeslar1084 Год назад

Thank you for your video!! After watching I was able clean the brushes on my Vitamix blender (it completely stopped working) and now it works totally fine again! :D You're awesome much appreciated brother!!

@Svdreamchaser Год назад

Glad it helped. Especially with the price we pay for a good blender. They shouldn’t be disposable. Lol.

@hernanfonsecacamacho6484 4 месяца назад

Hola tengo una ninja 642 tiene corriente pero a la hora de encender hace falso se pone el conteo pero el motor no enciende y la golpeó y intenta encender ya limpie los carbones pero no asi

@Svdreamchaser 4 месяца назад

No estoy seguro de lo que puede ser. Las bobinas son el artículo fácil de limpiar, pero es posible que tengas que llevarlo para una reparación en un centro de reparación de electrodomésticos ninja.

@pilarschumaker3360 5 месяцев назад

Imma try this.. 🤞🤞🤞

@Svdreamchaser 5 месяцев назад

I hope all works out well.

@getmymail2676 10 месяцев назад

I definitely appreciate your video! Though it doesn't touch on my issue I'm hoping you can give me some direction. My older ninja BL770W now leaks when I'm when making our smoothies. So I bought new blades (tops). When brand new they work fantastic but all start leaking while blending after a few months. My wife wants to replace the $200 blender with another $300 blender. I'm thinking something in the blender is causing the heads of each blender top to malfunction. Any ideas?

@Svdreamchaser 10 месяцев назад

I will start by saying i don’t know. Some speculations here may be that the blades spinning or vibrating may be rubbing the seal along the bottom of the blender and damaging it. Of it is in the “blender cup” i would see if the rubber gasket inside the lid (with the blades on it) has been removed, cleaned and inspected). Seriously though this is just a best giess.

@rudolphenfield1786 22 дня назад

My ninja CT670 UKV has stopped working, and I will try and clean the brushes to see. Aby thoughts, please? Thanks for your insight

@Svdreamchaser 22 дня назад

I don't know for sure with that model, but based on what I saw with mine, a good first step is going to be to clean the brushes and where the brushes rub the shaft (I think that is called the stator, but not sure). Good luck, I would love to have you reply back here and let me know if that worked. Really curious.

@alituhatonny8172 7 месяцев назад

i want learn more

@UpaliNanda-ml9oj Год назад

Wiring side of a blender

@Svdreamchaser Год назад

I am not 100% sure if your asking a question or just chatting about the topic, happy to help if there is a question about it.

@prafulshah3982 Год назад

For Ninja Model BL830CB 30 Kind of disappointed with this incomplete demo, was looking for as how to remove motor ? Or How to remove top bushings around blender drive ? Or how to remove cooling fan from motor shaft ?

@gillhotka4483 Год назад

Sorry. This video may not be the one you want. You may have to search others. I was able to diagnose and repair mine as shown.

@Svdreamchaser 9 месяцев назад

Sorry this wasn’t what you were looking for but showed how i diagnosed and repaired mine.

@UpaliNanda-ml9oj Год назад

What is the potention meter

@Svdreamchaser Год назад

I am not 100% sure, but thinking you are referring to a poteniometer. Those are typically what is connected to a "knob" like the speed control on this blender. It essentially varies the resistance on the circuit so you can get different throughput of the power. When you see something that changes speed, or frequency, those are often potentiometers.

@condelz1 Год назад

I have a cuisinart blender that was making a burning smell & now it will not turn on anymore, any suggestions

@Svdreamchaser Год назад

I don’t k ow based on that, but I am a firm believer in trying before replacing. My recommendations would be to ensure you lay out all the screws and parts the way they come out on a towel or blanket spread out. My guess would be that it may be carbon build up on the parts you saw me clean here. If they don’t make great contact via their contacts and it will drive up amperage to get all the power it needs.

@Paulholio69 2 года назад

Those things aint cheap! I hate that so many things are impossible to repair these days...

@Svdreamchaser 2 года назад

They don't make it easy that is for sure. Then on top of that, it is hard to get parts too. I can recall being able to go to an appliance repair store and get just about anything you needed. I guess you can still do that, but most people just buy new. Crazy and I really worry that we have lost the skill of repairs. Think of a shoe cobbler, or alterations shop or TV repair. All of that stuff is gone for the most part. I guess alterations still happen for weddings, suits, etc, but not as common for the every day folks.

@peterkiruru3693 Год назад

Mine blends only for two minutes then it stops, after like five minutes it runs again, really disappointing, what would be the problem

@Svdreamchaser Год назад

That almost sounds like it is overheating or something. If you open it up and clean all the parts and ensure there is good air flow to the metal around the spindle it may help. That is an odd behavior and it sounds heat related?

@UpaliNanda-ml9oj Год назад

Wiring side of a blender

@Svdreamchaser 9 месяцев назад

I hope this helped and you found it useful.

@marcospadilla9819 7 месяцев назад

I have a buzzing sound coming from the magnetic brushes. What coil are you referring to? Is it the black part that come right up brush to make it spin?

@Svdreamchaser 7 месяцев назад

@@marcospadilla9819i rewatched and i think the diagram example at 4:35 in video will help. I was referring to the brushes that rode agains the commutator (i think i said coil by mistake instead of commutator).

@marcospadilla9819 7 месяцев назад

@@Svdreamchaserthank you. I was able to take out the brush which was attached to a spring. What sand grit did you use for cleaning the commutator and the brushes. Could I also used qd electronic cleaner? Thank you so much. Been not working for years and this is my last try

@Svdreamchaser 7 месяцев назад

@@marcospadilla9819 I think I use 120 grit but frankly I don’t know that it matters a whole lot I probably wouldn’t do anything like 60 or 80, that may be two course, but certainly workable if that’s what you have handy. You could use a mail file I don’t think it matters exactly what you use. And if you need to clean it by all means you could use an electronic contact cleaner just make sure you use one that’s designed for electronics so it doesn’t cause any challenge with shorts.