In this video we look at the windscreen washer jet set up on the Smart Car ForTwo 1st generation W450 and show how to diagnose and repair any issues with the washer jet / pump etc.
my front pumps just fine but my rear doesnt work anymore. it just randomly stopped. i was told theres a fitting behind one of the tail lights that comes apart, but i have yet to look due to the weather. it wont stop raining.
Well, I've just had a new pump fitted, and it's still not working properly. I've been told it's the washer jet. Tried unblocking with an air pressure gadget and also a paperclip, it's does the first squirt perfectly then stops..please help, any ideas ?
Hi friend, great job as always. I wanted to use your skills to ask you something, I have to change the nebulizer nozzle you see in the video (my car is also a Smart 450), can you tell me how to do it? Thank you
My washer pump is working only with full washing liquid reservoir, but as soon as I waste for example half of liter of liquid my pump stops spraying water even if I can heare it it's working electrically. Any suggestion?
neal finnie Neal, you need a 1/4 of a tank of fuel minimum plus an uninterrupted run of around 20+ minutes if you have the yellow light on. You don’t need to blast it full speed anywhere a constant 50 MPH plus will do. Be careful though as if you get the red warning you cannot clear it, you’ll need to find a good independent Land Rover garage to force a regen of the DPF
neal finnie Good to hear you have a warranty Probably find there is a leak on the air induction side Maybe the 4 small hoses on the plenum Hope you get it sorted 👍🏻