No video :(

How to Disassemble the FX Impact - FX Masterclass

Подписаться 35 тыс.

Просмотров 208 тыс.

50% 1

FX Masterclass -World-renowned airgun smith, Ernest Rowe, shares a lifetime of airgun knowledge. covering everything from basic airgun maintenance to a comprehensive step by step repair tutorials. ** Table of Contents Below **
In this Episode, Ernest demonstrates how to disassemble your first-generation Impact.
Table of Contents
0:28 - Degas Rifle
1:49 - Upper Removal
4:10 - Reloading Assembly
5:01 - Valve Assembly
8:51 - Trigger Assembly
10:04 - Regulator
12:28 - Bottle Adapter
For a detailed schematic of the FX Impact, follow the link below:
www.fxairguns.c...
To order parts www.fxairguns-...
If you have a specific tutorial you want Ernest to do, please leave them in the comment section below.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@hankvana2149 4 года назад

Thanks Ernest, waiting for my Impact to arrive - now I don't have to take it apart to satisfy my curiosity as to what is inside - you have shown me already!

@Navigator777777 Год назад

13:15 Bass adapter. My Mk3 was working flawlessly on October 22. I switched from the .30 barrel to the .22 so I could compete locally. November 3, it started snowing. We had snow on the ground for another 5.5 months. Gun was stored in the case. I opened the case in April. Was saddened to see no pressure. Pumped it up but I could tell it was leaking. I could put my finger over the counter sunk area of the Bass Adaptor apply pressure and release and could feel it pop a little. I didn't know what it was called, how to safely empty the gun or what to do but thanks to this video, I do now! Thanks Ernest.

@Navigator777777 Год назад

Fixed it! There was a metal sliver in the o-ring. I bought one of those FX O-ring kits. Back in service!

@jackdaniels7913 4 года назад

Way farther than I ever hope I need to dive 😅 but I know the day will come and I'll be thankful for this video! 🥃cheers🍻

@nuangel 6 лет назад

Fantastic ! An interesting topic for another video would be addressing common trouble areas with the rifle and how to solve them.

@John-ee4ki 5 лет назад

Just wanted to say. With the exception of "modified" vise grips, very tool friendly. Not a machinist but been around the trade. BUTEFUL! (SP NOTED).

@edosancl 6 лет назад

ufff I need to see this video at least 5 more times! what a great info, very complicated air gun (for the most accurate one)

@weirhauch1002 5 лет назад

Complicated a lot

@22lr_plinking 3 года назад

Is there video for the impct mk2 with power plenum? Or basically same as this video

@korbendallas4345 Год назад

Thank you, would be nice to have scheme of seals installation and undesrtanding how often they should be replaced. Do you have any maintenance schedule, operational requirements?

@jorcileisousaresende1397 5 лет назад

Ernest muito bom este tutorial de como desmontar a IMPACT

@mrgoldminer49er 5 лет назад

Can’t imagine Air Arms showing you how to disassemble one of their guns and then inviting you to tune it up 😄

@shawnsponds 4 года назад

Air Arms doesn't have to show you how, Their guns are so much more simple and better built

@DocMustafa 4 года назад

shawn Debatable. Also no, it’s just that because of the complexity, it requires you to be careful. It’s like a Mercedes.

@paulomarcoa 6 лет назад

Thanks master, now we expect the same from FX Crown!

@neil1058 5 лет назад

It's not a trigger shear ....the correct term is sear. A great set of videos. Have watched them all Neil .25 impact owner.

@sugriv3405 4 года назад

Watching this now I'm sure I'll never be able to re assemble it again 😉😊🙏

@provisoriopcpcaseira7814 4 года назад

very good video when i buy mine i will know how to move

@cleydermancanedo2030 5 лет назад

Um equipamento extraordinário porem para nós aqui no Brasil ela tem um preço muito alto.

@farooqjamatee 4 года назад

Great sir

@AndreysantanaD 4 года назад

Carabina muito bom nota de mas eu creio que ela é muito ponte

@allenhaymond5934 Месяц назад

My FX impact mkIII is leaking around the bottle adapter in video you said it was torque down so if I need to fix the leak is it ok to remove it myself and what is the torque setting for it

@chenglo8999 Год назад

Im about to do a disassembly because for some reason, the hammer adjuster hex screw assembly is completely loose! It can slide back n forth with a flick of my finger. Any tip on what part ciuld have come loose or broken?

@biagiocozza2933 5 лет назад

Well done. I can see you've done this more than a few times.

@timothyjohn3006 4 года назад

Great video Ernest, what size Allen key's do you need for the full strip down? Many thanks, Tim.

@marcooliver48 3 года назад

Hi there Ernest I have a question about the mkii pp working pressure valve I want to put in mine a New botle in 350cc and 4500 psi the question is can use this botle at 4500psi or 4000 psi or not? Im glad to learn here. Have a nice day

@jeremyrayner1644 5 лет назад

brilliant

@user-qv9px1hq2u 4 года назад

عالیه ای کاش از روش پاور پرنیوم هم باشه

@gorankovacevic1669 5 лет назад

Great video. Also it would be nice to make video for comlete disassembly of Crown barrel.

@FXAirguns 5 лет назад

We have an Impact X barrel video in the works.

@gorankovacevic1669 5 лет назад

@@FXAirguns Great news👍

@Hipporider 4 месяца назад

Forgive my ignorance, but it's this the Mk2 or Mk3?

@petter5721 5 лет назад

Well made Gun!

@nacaosuvlog6149 4 года назад

Can you please show me the detailed drawing?

@huntergameson9665 3 года назад

Hi Ernest, how do you charge the plenum after you scree back on the bottle?

@wahyushooter15 3 года назад

Waaaoow fx impax😍😍

@lukeshoot 5 лет назад

thank you very much... no service center for fx impact in my country, so this is a big big help.... question, is there any list of spare parts that is prone to broken over time? may need those in hand when buying fx impact, since again no fx impact service center in my country...

@juancarlos-rf5ko 2 года назад

How to know which generation corresponds to my regulator?

@finforcer 5 лет назад

Can you bleed the the regulator same way on the crown by turning the reg.adj.screw?...and if, does it need to be adjusted to specific bar setting (like 135bar like mine is) during the refilling?

@damianrivero5598 5 лет назад

Hola que tal, tendras algun fx impact Mk2 en venta Saludos buen video...

@sid8556 4 года назад

En que pais vives ?

@whiteykauai Год назад

where or how can we make that removal tool for the reg?

@Capodona1980 3 месяца назад

What drill is that with what bit

@user-fw8ku6wb7i 4 года назад

สุดยอดครับชอบมากครับfx

@bophoto 4 года назад

Hey Ernest, how do I rebuild the FOSTER fill valve?

@jackagain8346 4 года назад

@Bo Lorentzen Degas your gun then go to the 8:50 mark. Just take off the trigger guard and screw it out. You will need to replace it with a new one. These have a check valve built in and can be repaired though. This might work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IlJk5MmZQgA.html

@faisalalhelali3752 4 года назад

اتمنى لو تكون الترجمه بعدة لغات ليستفيد الجميع بدون استثناء

@nongthangthouanojam2194 2 месяца назад

1:23 My valve is unseat how do I fix it

@chuethao9321 5 лет назад

Hi Masterclass I got problem that air leaks through the vital hole next to the safety. I know that when I took the air tank out and dry fire, it might caused damage to the regulator system. Can you tell me what can I do the fix it and what o ring I need to order. Hope to hear from you soon.

@FXAirguns 5 лет назад

Sounds like you need to reseal your regulator, you can order a Regulator seal kit from FX USA by calling (866) 639-0772. Once you get your o-ring kit, watch this video on how to install the o-rings. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FOlG19kTf6Y.html

@fathertimencUSA 5 лет назад

FX should make orings kits to change every oring in the gun.

@Hipporider 4 месяца назад

I bought a full O ring kit for mine.

@fathertimencUSA 4 месяца назад

@@Hipporider Yes I have seen some on EBay.

@cuabnoogyugnoog-birdshomec87 3 года назад

I would like to buy this airgun. But I am from LAOS. How can I but it?

@FXAirguns 3 года назад

You can find our international retailers at our website, FXAirguns.com/retailers

@mahmoudhasanat7962 4 года назад

There was a leak in my impact, then found it from part A24 19694 (brass screw), I tried to take it out to replace it and, I destroyed it and it still in its place!!, I can't remove it, what should I do?

@sentryking7961 5 лет назад

Do you manufacture the .177 impact with smooth bore

@ptigptig 5 лет назад

Master... I have the Panasonic driver like yours, Can you tell me where to get the metric allen key bits that you use with it. I'm looking for the same ones that will lock into the Panasonic driver Collet. Thanks.

@CygnusX250 4 года назад

thorp mip makes the best tips....also snap on tools have some good tips, i prefer mip's though (any rc hobbyshop will have them)

@cairotavares4373 5 лет назад

Sonho de consumo

@kotaani2934 5 лет назад

At 7:11 i was thinking " What if Fx made an Fx impact pistol with an x barrel with a 10 shot mag at 30 ft lbs?

@shaneperdisatt3256 5 лет назад

30 ft lbs on an air driven pellet through a 5" barrell???... Fredrik is good but not that good!

@doha-198s 5 лет назад

How much is it? And how to buy? Sb shows me, plz

@nguyenhongkhanh7304 4 года назад

How much is the brother? Can you transport to vietnam? I like it.😍😍

@rolandreymonroy311 5 лет назад

Can you send your Item Here in the Philippines when im going to order it?

@CygnusX250 5 лет назад

how do you degas the bottle

@mark_tile-man 6 лет назад

Does the impact come with a spare set of all the rings?

@FXAirguns 5 лет назад

No, they do not, you can order all O-rings from FX USA by calling (866) 639-0772

@CDOO2391 4 года назад

For $2000+ USD, they should come with a spare set.

@mark_tile-man 4 года назад

@@CDOO2391 yep I agree. I bought mine 6 months ago and the probe catches on the mag. Got to take the probe out and file it down 🙄

@TeireiPhaiKhawlum 5 лет назад

Is it legal to carry these airguns on aeroplane? Do you have distributors in India? How can we buy FX air rifles in India?

@hchruaipuia8305 5 лет назад

the very no.

@AirgunMunguia 5 лет назад

Me podrás pasar tu correo para una consulta sobre el regulador de wildcat MKII

@detodounpoco9744 5 лет назад

Yo qiero una pero soy de republica dominica

@KhalilKhan-qg1et 4 года назад

How much is this

@atmosumartowismurti5495 6 лет назад

Clear Front view from the beginning will be more great tutorial..

@FXAirguns 6 лет назад

Thanks for the feedback, will work at better angles to see everything.

@alexzamora6700 5 лет назад

Holy crap. Hope I never have to do this to my impact !!

@haonguyenthe9333 5 лет назад

How many.???

@tituspullo9210 4 года назад

More detail needed... camera work is not showing everything that is being done clearly enough

@lexmar5443 5 лет назад

I want classic ph made airguns

@Khoinghiep365ngay 5 лет назад

I want to buy goods to Vietnam, what to do

@gitongsigit591 5 лет назад

👏👏👏

@piiputanwputranw8561 4 года назад

Its is dancook

@aliali-et7xh 5 лет назад

Price dis fximpact?

@jackagain8346 4 года назад

I would stop at 5:30.

@celebessumatra6889 4 года назад

Ask uncle sniper please😢

@oclathichche8217 5 лет назад

Helo vietnam

@bonglina4892 4 года назад

Hi$$$$

@SivaKumar-hs3nm 5 лет назад

Fx air gun how mash rupish

@nacaosuvlog6149 4 года назад

I am very passionate but I cannot afford to buy. I can help you

@paulkarkorian6377 4 года назад

No wonder what it keeps leaking air !

@jackagain8346 4 года назад

See it it's the Foster fitting: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IlJk5MmZQgA.html

@sontung2790 5 лет назад

Helo daoloa vn ok

@brokosok 5 лет назад

You took apart a new gun and things were loose on it already tells me to stay the hell away from this gun

@airepcp4881 4 года назад

What are you trying to do?? Show your face or teach how to disassembly the gun??? I do not want to see your face!! Top view is nice but do not show details. If try to show an o'ring far away, I just see you but nit the parts you try to show. 85% of the video lost in bad takes. Get close views to the disassembly process in detail and we can really learn what you try to teach!!