Тёмный

How to do a Spark Plug change on a 2011-2014 S197 Mustang V6 

Auto Mafia Racing
Подписаться 29 тыс.
Просмотров 12 тыс.
50% 1

today we show you how to install spark plugs on a 3.7 v6 mustang 2011, 2012, 2013, 2014
automafiaracin...
Buy Your Performance Parts From the Mafia: automafiaracin...
Facebook: / automafiaracing
Instagram: / automafiaracing
We use RU-vid Buddy to help our Channel: www.tubebuddy....
#AutoMafiaRacing #PartsPassionPerformance #AMRorDIE #MafiaTuned #VeteranOwned #JoinTheFamily
Auto Mafia Racing LLC, and Auto Mafia LLC are in no way telling you to attempt these mods, or to drive, or do what we do. Please consult a professional mechanic prior to doing any work on your vehicle. We will not be held liable for any actions taken due to the viewing of these videos.
Tags: Auto Mafia Racing Auto Mafia Drag Racing Parts Passion Performance Dyno Tuningauto mafia racing,auto mafia,parts passion performance,dyno tuning,drag racing,mafia tuned,3.7 v6,mustang 3.7,spark plugs,how to change,mustang 3.7 turbo,spark plugs replacement,3.7 f150,3.7 explorer,3.7 ford flex,3.7 mkz

Опубликовано:

 

15 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@dailys1979
@dailys1979 2 года назад
I’m loving all the how to vids for the 3.7 Keep up the good work AMR
@automafiaracing
@automafiaracing 2 года назад
Haha it's purely laziness. We get tired of trying to explain how to do things. Now we can just send a link hahah
@graytv2776
@graytv2776 Год назад
S197 owner, Awesome video thanks guys👌🏽
@automafiaracing
@automafiaracing Год назад
Our pleasure!
@chicanoman2999
@chicanoman2999 2 года назад
I legitimately want to buy a V6 mustang just cause of how much aftermarket/ general support you guys offer it 😂
@automafiaracing
@automafiaracing 2 года назад
We have created a lot for it!
@ToadxGaming
@ToadxGaming Год назад
Great video again. Quick question, if I wanted to clean out the intake plenum at the same time, would using MAF sensor cleaner be okay for that? I do not want to damage any plastic components of the plenum
@automafiaracing
@automafiaracing Год назад
Should be fine
@andresramos6748
@andresramos6748 2 года назад
Can we get a video of how the tummy gun sound on a 2013 3.7 with cats and with out and both the gosh cam and tummy gun ? I want to buy them but I don’t know if in one tune together or separate any discounts 😅
@automafiaracing
@automafiaracing 2 года назад
Check our other videos and Instagram. Lots of videos of ghost cams and tommy gun tunes. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com facebook.com/automafiaracing
@jaysierra3677
@jaysierra3677 Год назад
Hey I wanted to know what gap size you use for N/A for these plugs on the 3.7
@automafiaracing
@automafiaracing Год назад
.048 typically
@jaysierra3677
@jaysierra3677 Год назад
@@automafiaracing one more question I ordered aftermarket ignition coils n then installing those plugs at that .048 size and being fbo . What are the chances of my misfire code going away
@automafiaracing
@automafiaracing 5 дней назад
less than if you ran oem coils
@jaybroderick5651
@jaybroderick5651 2 года назад
For non boosted applications, can you use the spark plug right out of the box without having to gap?
@marktiny8928
@marktiny8928 2 года назад
Always check the gap, they usually are pre gapped but I have had some that were wrong.
@jaybroderick5651
@jaybroderick5651 2 года назад
@@marktiny8928 is it .052 for the 3.7?
@automafiaracing
@automafiaracing 2 года назад
We suggest an Na gap of about .045
@rainehernandez9310
@rainehernandez9310 2 месяца назад
I have a 2014 3.7l mustang with a JLT cold air intake, what calibration should be ?
@automafiaracing
@automafiaracing 2 месяца назад
Huh
@anthonyluna9049
@anthonyluna9049 Год назад
Do you need to gap the plus If its stock ?
@automafiaracing
@automafiaracing Год назад
No
@ES-kh7fj
@ES-kh7fj 6 месяцев назад
How did you guys remove hose k14 away from the upper intake manifold?
@automafiaracing
@automafiaracing 6 месяцев назад
Undo the clip and pull it off
@rainehernandez9310
@rainehernandez9310 6 месяцев назад
In a 2014 3.7l mustang v6 with a cold air intake, what calibration should the spark plugs have?
@automafiaracing
@automafiaracing 6 месяцев назад
Oem Gap should be around 0.048
@allanlopez4818
@allanlopez4818 Год назад
my mustang isn’t boosted but i need to know if it comes gapped already for stock ?
@automafiaracing
@automafiaracing Год назад
Yes comes ready for an NA car
@zhankins1
@zhankins1 Год назад
What do you gap the plugs to on an NA bolt on car? Do you also torque the lower manifold bolts to 89 inch pounds?
@automafiaracing
@automafiaracing Год назад
.045 generally for NA is what we do. Id have to double check but that torque sounds correct.
@zhankins1
@zhankins1 Год назад
@automafiaracing Thank you! I just installed your ported intake as the final bolt on. I'm loving it!
@automafiaracing
@automafiaracing Год назад
hell ya
@TfearWasHere
@TfearWasHere Год назад
fuck me i thought i was going to have to take a distributer cap off and be done with it
@automafiaracing
@automafiaracing Год назад
Lol
Далее
Steve Tech: Properly Reading Spark Plugs
6:27
Просмотров 213 тыс.
@HolyBaam ультанул в конце 🧨
00:34
Просмотров 245 тыс.
How to install injectors on a 2011-2014 Mustang 3.7
11:11
SUPERCHARGERS | How They Work
8:02
Просмотров 4,3 млн
Why you shouldn't remove your stock intake manifold
10:26
How To Perform a Compression Test - EricTheCarGuy
10:00
How I Made My V6 Mustang FASTER!
10:29
Просмотров 38 тыс.