Тёмный

How To Perform a Compression Test - EricTheCarGuy 

EricTheCarGuy
Подписаться 1,8 млн
Просмотров 2,3 млн
50% 1

Compression Testing and What You Can Learn From It - EricTheCarGuy
Here is a video on performing a compression test on an engine to assess it's mechanical condition. An engines ability to compress air and fuel is directly proportional to it's performance since an engine is nothing more than an air compressor once you take away all the controls. A compression test is a good general test that will give you an idea of the engine's overall health but it does not give specific information on what the problem is should there be one, for that a "leak down test" would be required, here is a link to that video.
• How To Perform A Leak ...
However if you find yourself looking for the source of a performance problem with an engine, this is a great place to start. This test is often overlooked in favor of looking at the fuel or ignition system, I think that's a mistake, if an engine can't perform mechanically no amount of electronics will make that better.
Recently, I hit the 500 subscriber mark and I'd like to thank all of my subscribers past, present, and hopefully in the future for that. I enjoy making these videos and the fact that you seem to like watching them means a lot to me. So, thanks for subscribing, rating, and commenting, those little contributions make it all worth while.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
ericthecarguy.com/
Visit EricTheCarGuy Forum
www.ericthecarguy.com/forum/de...
Visit my Facebook Page:
/ ericthecarguy
---
Also see the video I did, "Octane Ratings and the 4 Stroke Engine Cycle" for more information on how compression works and why it is important.
• Octane Ratings Explain...
Thanks for watching and stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Авто/Мото

Опубликовано:

 

28 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1,6 тыс.   
@thewjmoneypit7941
@thewjmoneypit7941 4 года назад
Lol im watching it now 2019 and he’s got 1.3M subscribers
@forrestl5597
@forrestl5597 4 года назад
1.4M
@movingforward4950
@movingforward4950 4 года назад
And me in 2020
@lshooku
@lshooku 3 года назад
1.8
@samthomson3394
@samthomson3394 3 года назад
@@lshooku well me mustve lost 400k
@javiermendoza2994
@javiermendoza2994 3 года назад
Right. Still helpful as hell though. 🤙
@drenico1
@drenico1 2 года назад
when I first watched this video almost 12yrs ago, Eric had a couple hundred subs and now he's at 1.6mil subs.. well deserved! Thanks for all you do Eric and the detailed information you provide in all your videos, I'm currently watching it as a refresher.
@lightworker303
@lightworker303 3 года назад
I love this "Today I hit 500 subscribers." Today he has 1.5 million!
@joeman543
@joeman543 9 лет назад
500 subscribers then, 500,000 now. We all appreciate you Eric! Edit: 1.5M now
@paulert23
@paulert23 9 лет назад
joeman543 and now 614k daym
@AdilZaman87
@AdilZaman87 8 лет назад
+ROB ANDRETTI 676,238 and growing strong ...
@NamingGaming
@NamingGaming 8 лет назад
+Adil Zaman 689,163
@leo321xda
@leo321xda 8 лет назад
+josh mcbride 706,914.....
@Gregkal123
@Gregkal123 8 лет назад
+joeman543 721,052 now :D
@Stop..carry-on
@Stop..carry-on 8 лет назад
I liked Eric's old original honest style in his vids I'd say it's why he's done so well. I remember one Christmas When I discovered Eric's vids I watched the entire back-log ,Now it's all about about product placement and cheap tools .this vid was made when he was a real working mech or had that feel of hand to mouth. How ever the fixing it forward vids are a step in the right direction
@thatgray24v24
@thatgray24v24 7 лет назад
It's crazy how I come back to use these old videos when he had 500 subs great guy
@Rob-fx2dw
@Rob-fx2dw 6 лет назад
Congratulations Eric - you really have contributed to assisting me over the last few years to do work on all of my cars and my family's cars.
@wyatthundley4960
@wyatthundley4960 5 лет назад
Now your at 1.1 million and i'm one of them. Thank you Eric for what you do, it has been invaluable to many of us diy'ers.
@stuartsmith5146
@stuartsmith5146 6 лет назад
Thank you for saying “why” to do things. Soooo helpful.
@paulc858
@paulc858 4 года назад
LOL 500, now you have 1.3 mil! Keep up the great work Eric. Keep en coming. I learn something new every time.
@MightyNib
@MightyNib 7 месяцев назад
This was fun to come back to - you talked about having 500 subs at the beginning, and now you're approaching 2 mil. Thanks for all the help Eric!
@alexshaw6354
@alexshaw6354 6 лет назад
A million. We're still watching Eric. All the way across the Atlantic in England. Keep it up mate.
@meriteman
@meriteman 10 лет назад
You are a brilliant teacher! Keep up the good work
@MattMohsOutdoors
@MattMohsOutdoors 6 лет назад
500 subs. Now you have over one million
@michaelserrano7097
@michaelserrano7097 5 лет назад
12,000,000 right about now!
@carlossoto6623
@carlossoto6623 3 года назад
One of the best info videos I've ever seen. To the point, and showed the diagnostics on how to perform them. Thanks bud.
@harryperrier7223
@harryperrier7223 8 лет назад
Just bought an RB20DET and started learning the mechanical ins and outs of a combustion engine. Thanks very much for these informative videos!
@emirz321
@emirz321 11 лет назад
Great videos, love the detail on each one which is missing from a lot of similar mechanics! Thanks :)
@TheRagingUnprofessional
@TheRagingUnprofessional 8 лет назад
lol 500 subscribers LOL. Watching this now and he has 778k.
@reggiexp69
@reggiexp69 7 лет назад
839k
@michaellhall94
@michaellhall94 7 лет назад
1,100,874 views
@mikegillett5881
@mikegillett5881 7 лет назад
where
@themechanic2500
@themechanic2500 6 лет назад
Mike Gillett 985k now lmao
@glennandrews5103
@glennandrews5103 6 лет назад
1 mil niggas
@corywootton8047
@corywootton8047 4 года назад
You're the man Eric. Thanks for your help, ive been watching your videos for years, and i appreciate how concise and informative your videos are, always containing your signature amount of dry humor. hahaha
@edwardstark8377
@edwardstark8377 3 года назад
1.52m subs now and back then you was happy from 500. Eric i love you bro, seriously.
@ericthecarguy
@ericthecarguy 13 лет назад
@Yobidefy Actually this test was done on a working engine and the readings on an engine of this kind of mileage is actually pretty typical in my experience.
@NathansBMWWorkshop
@NathansBMWWorkshop 8 лет назад
Good video i might ad that if you have a gauge that has a air hose hookup you can use it to pressurize the cylinder and check for coolant leaks like a cracked head or bad head gasket by looking for bubbles in the radiator by taking off the cap.
@transamturdpolisher4070
@transamturdpolisher4070 11 лет назад
Very good job man! I'm restoring a trans am and with your help I am doing all of my own work. You speak well and explain things in great detail.......I wish all of my teachers in school were in depth. Thumbs up!! Subscribed!!
@jimmorris5700
@jimmorris5700 3 года назад
Actually my friend you’ve got something that money can’t buy you’ve got a very nice pleasant voice to listen to ! Jim .
@ericthecarguy
@ericthecarguy 13 лет назад
@jdmsrv93 I take them all out, makes for more accurate readings in my opinion, that way the other cylinders are not trying to compress while your doing the test.
@ericthecarguy
@ericthecarguy 13 лет назад
@chronosun13 No, just remove one set of plugs, the easiest ones to get to in my opinion as it doesn't matter which one you remove for the test.
@captainrandom6858
@captainrandom6858 Год назад
Congrats on 500 subscribers Eric!
@raphialfehr8593
@raphialfehr8593 3 года назад
All the power-mech students in our school are using your videos to learn online, good job mate!
@brad8665
@brad8665 9 лет назад
Lol 500 subscriber mark. You're almost at 500,000 now!!
@B.A.Gondal
@B.A.Gondal 7 лет назад
it's a good idea to precisely measure the equal amount of oil for each cylinder for a wet test. This way you won't have to worry about putting more or less oil and gettng wrong readings thus possibly making a really bad decision about the engine.
@Turboboob
@Turboboob 7 лет назад
if you have low compression.... your pulling the engine so it doesnt matter... a wet compression test is to figure out if its rings or valves.. really doesnt matter how much atf you dump in the cylinders
@mtrott101
@mtrott101 Год назад
@@Turboboob regular oil or thick stuff for the wet test?
@Turboboob
@Turboboob Год назад
@@mtrott101 5w30/10w30/atf, doesn’t matter. I’ve used it all with the same result.
@yycforlife5048
@yycforlife5048 Год назад
​@@mtrott101 wouldn't you use tge same oil your car takes?
@machetekid07
@machetekid07 4 года назад
youve come a long way Eric, thank you for all your help
@playstationRLZ
@playstationRLZ 11 лет назад
500 a little over 3 years ago. now he's at around 150,000. congratulations man!
@GlycerinZ
@GlycerinZ 8 лет назад
dang 500 subscribers. Now you have over 650K.
@BigDirtyBasterd
@BigDirtyBasterd 8 лет назад
+Glycerin 740k now
@Mystickneon
@Mystickneon 8 лет назад
+BigDirtyBasterd 978k
@MasterKief-fo20
@MasterKief-fo20 8 лет назад
+Mystickneon 759k now
@SoyAweonado
@SoyAweonado 8 лет назад
+Peter Cas 782,976 now 23k subs in 1 months wow, thats arround 700 subs per day
@Michal_1977
@Michal_1977 8 лет назад
~ 795 k :)
@ericthecarguy
@ericthecarguy 13 лет назад
@miniwee3 Yes you need to be at WOT when doing the test.
@pv2smurf
@pv2smurf 4 года назад
From 500 subscribers to 1.35million on 9/2019. Rock on ETCG 🤘
@orangeshell8
@orangeshell8 4 года назад
This was so long ago how far you have come its crazy
@edrobertson466
@edrobertson466 7 лет назад
Great job on the compression test lesson. Keeping it within common sense and not to technical. Thank you very much. Look forward to seeing more teaching videos. My subject vehicle is a 97 Nissan D21 Hardbody Pickup.
@ericthecarguy
@ericthecarguy 13 лет назад
@meganerchia Good eye, it was ATF. I just had an abundance of it so I put it in my oil can. ATF is oil with some additives and dye added.
@baconlover5404
@baconlover5404 3 года назад
Should you use a specific ATF for the wet test?
@ethandenton3393
@ethandenton3393 4 года назад
You explain things very well. I'm grateful as this is very rare on youtube.
@thedarkener
@thedarkener 10 лет назад
This is the second time I've run into your videos searching around. Thank you for making them!
@MrJet30
@MrJet30 5 лет назад
lol 500 subs, now i see 1.2M
@richardsantos1273
@richardsantos1273 5 лет назад
Engine compression test Perfectly described and totally understood! Thank you Eric, now can help me understand my freakin wife?
@Pfsif
@Pfsif 4 года назад
Just get a new one, not worth fixing it.
@fondeur
@fondeur 12 лет назад
Very nice breakdown Eric. Learned a lot from it and will apply the same steps in my shop. You earned another subscriber.
@jamessim7074
@jamessim7074 7 лет назад
Simple , direct with optional ideas of what could be. Thanks it removed all them complicated or not enough info. Thanks again Jim
@karatemikepatolino
@karatemikepatolino 7 лет назад
I wish you could work on my Honda
@stab2killnecks
@stab2killnecks 11 дней назад
He makes these videos so you can work on your own honda
@zaftra
@zaftra 10 лет назад
Shouldn't the engine be to operational temperature?
@bazthehandyman
@bazthehandyman 10 лет назад
No mate.
@zaftra
@zaftra 10 лет назад
bazthehandyman Oh right, cool (excuse the pun), save on petrol. Cheers.
@shokwave23
@shokwave23 10 лет назад
Some people would say yes, their argument being that a cold engine has better compression because the elements inside are cold and not expanded. So they recommend warming up the engine to get the metals to expand before checking compression to get a more "true" reading. I've never done a compression test so I can't give my opinion, but the logic seems reasonable.
@zaftra
@zaftra 10 лет назад
Vincent Gutierrez I did mine warm and they all came out at 14.5 - 15 bar, this is in a 1996 Audi, I'll have to do one cold some day and a 'wet' test to see the difference.
@shokwave23
@shokwave23 10 лет назад
That'd be great! I'm always down for some good science and crunching numbers to clear up car myths haha
@guillermolg24
@guillermolg24 10 лет назад
mann!! seriously, i want to met you in person man!, you have helped me so much... ( btw: im going for automotive technology ) and even though i know what are you talking about, you helped me to get into the details more easily.. Thanks man!
@schrenk
@schrenk 3 года назад
Going to do a compression test on my '71 MGBGT today for the first time. Thanks for the video.
@Codyrosa
@Codyrosa 10 лет назад
lol 500 subs eh? Think you're a little past that now.
@03vicBlack
@03vicBlack 10 лет назад
this was in his old shop, from when he began his channel :) just a fyi
@jesselanyon246
@jesselanyon246 7 лет назад
914,052 from 500 to almost a million, he made it.. lol
@mmmmtastyful
@mmmmtastyful 12 лет назад
i'v been watching these vid's for over a year and i just have to say ''you frickin rock dude"" you have answered tons of my questions and i have a special playlist on my you tube act. just for you man. thanks again man
@ActiveDadsRule
@ActiveDadsRule 4 года назад
From 500 to 1.7 million subs in 10 years. Love and appreciate your channel sir.
@MRxPOLSKAx
@MRxPOLSKAx 7 лет назад
How many of the people watching this are subaru guys? -_-
@ihadalife1177
@ihadalife1177 7 лет назад
Dan_Vallush I'm a 4g63 guy..lol
@TheNuke95
@TheNuke95 7 лет назад
Dan_Vallush I'm an rx7 guy
@stevenswisher4339
@stevenswisher4339 7 лет назад
Celica life
@herbertlofton3588
@herbertlofton3588 6 лет назад
Dan_Vallush zoom zoom
@WahooNo2
@WahooNo2 6 лет назад
Subaru +1
@williamdeleon4736
@williamdeleon4736 7 лет назад
Thanks Eric , for your lesson on how to use a compressor tester in wet and dry and explain it on details and organized. I work the same way as you do.
@DavidLunde
@DavidLunde 7 лет назад
Thank you for this! I recently bought an integra so it was perfect that you also used an integra in this
@oldhousemark
@oldhousemark 2 года назад
Congrats on 500
@garymahon1955
@garymahon1955 2 года назад
Very good presentation Eric.
@masonpugh3637
@masonpugh3637 9 месяцев назад
Great test Eric
@imdifferent2113
@imdifferent2113 3 года назад
Nice here in 2021 and you're at 1.57M subs congrats and thank you this is timeless information
@gerryrodriguez3924
@gerryrodriguez3924 5 лет назад
Thank you, Eric..... I have seen your videos before, however some of the first ones we're too long for me.... So I didn't subscribed, but now I have. Just wanted to say thank you.
@michaelw6277
@michaelw6277 2 года назад
Congrats on 500 subscribers!!! Have a cake!
@strongmaster
@strongmaster 8 лет назад
gotta feel good to look and see the 662,000 subscriber mark coming up. 500 was a proud moment now look, on your way to the gold play button, good job bud.I like all the videos
@0pticalc0ncepts
@0pticalc0ncepts 10 лет назад
Thanks for the detailed info. You really explain it very well.
@TerenceGardner
@TerenceGardner 10 лет назад
Oh and thanks Eric, I've learned a lot from your videos and your time is much appreciated!
@ganeden553
@ganeden553 8 лет назад
Awesome~! Great coverage of the whole diagnostics and perspective process. I have a #1 cylinder fail on my Alfa Romeo and was curious what a compression check is for~! Thanks
@user-sz8tp4zu3n
@user-sz8tp4zu3n 8 лет назад
Hi Eric. I have a 1973 Ford F100 that is burning a little oil. I have had the valve seals replaced and the burning is still there. I have bought a compression tester and with the help of this video will do the test myself. I do not have an air compressor so I can't do a leak down. Thank you for posting this video and also doing it in an understandable and clear manner for the average person without the foul language that is featured in so many of these videos. Regards, Donald.
@AdamGen88
@AdamGen88 10 лет назад
awsome vids bro, learning lots from you, currently rebuilding a 4g63 for my talon, fairly new to engine building. you cover alot more of basic stuff but hell I know what to do when I first want to start my rebuild thanks to another vid of yours, keep doing what you doing. subbed.
@cheapindian1
@cheapindian1 10 лет назад
AWESOME VIDEO ERICTHECARGUY thanks
@noblsht
@noblsht 12 лет назад
Nice job Eric, well done, I'm looking for your league down test video now!
@thatsdaniellelol
@thatsdaniellelol 2 года назад
Man thank you so much for that info about the pistons being offset and for explaining you how to always know where cylinder 1 is on a V shaped engine. I never knew about that one! Now I just have to figure out how to always know which is bank 1 vs bank 2. It seems like each manufacturer is different with that
@MrTonyBrooklyn
@MrTonyBrooklyn 10 лет назад
Love watching your video's. Clear precise information in laymans terms!
@jblai05
@jblai05 9 лет назад
Best video ever. You are an excellent, logical teacher, Eric, and videography is some of the best. RU-vid = crystallized knowledge. My father, a mechanical assembler/mechanic asks me how I know this stuff. I tell him, "I am the Smart son..." Thanks again!
@mikerobertson1781
@mikerobertson1781 2 года назад
Great video Eric.Now at more than 1.6m subs and well deserved.
@JonLasaga
@JonLasaga 3 года назад
amazing videos throughout the years eric thanks for that
@Rowan777
@Rowan777 2 года назад
Great video, your explanation was simple and to the point.
@acek100
@acek100 12 лет назад
i learn so much watch all ur vids.. yes all. im addicted to engines and mechanical devices.. thanx for all the info bud.
@AGearHead4Life
@AGearHead4Life 10 лет назад
Great video man! Good points and clearly presented.
@TerenceGardner
@TerenceGardner 10 лет назад
One thing that is also kinda important is you need your throttle at Full Open to get an accurate compression reading. This at least applies on my B Series Honda engine. 1) Engine should be warm for an accurate reading (I understand that the piston rings expand with heat?) 2) Full Open Throttle 3) It is also best is all spark plugs are removed before starting An additional note is that you can buy a remote starter switch to make the process way easier and allows you to watch the gauge closer.
@sunny2237
@sunny2237 12 лет назад
wow, great vid, that's so informative. especially when you were talking about the 1st cylinder on V engines. I didnt notice that, short sweet and to the point.
@seangarcia7544
@seangarcia7544 9 лет назад
Hi..Eric i just want to say your videos are a great help for a DIY man like me...thanks for all your help and the videos help me out alot..!!!!
@andrewhudson3723
@andrewhudson3723 5 лет назад
After all these years, still a great video
@robertkeenbuildingmylifesh3429
@robertkeenbuildingmylifesh3429 3 года назад
Love watching every bit of the amazing motivation .
@d3tach3d
@d3tach3d 10 лет назад
youve come along way in 3 years bud. congrats!
@freeobo85261
@freeobo85261 Год назад
This is by far the best information that I have found, easy to understand, thank you.
@Calicantre23
@Calicantre23 12 лет назад
Thanks a lot Eric, excellent explanation, keep up the good work!
@toddcott9510
@toddcott9510 4 года назад
Can't fault this video, you seem to have covered everything. Just wish every mechanic was up to your standard. Many thanks.
@SuperLostvegas
@SuperLostvegas 8 лет назад
Eric, thank you very much for this video. It was very helpful.
@dagreatson69
@dagreatson69 12 лет назад
very knowledgeable erick thankz lot keep up the good work... you help a lot people out there and and give more ideas on what they doin thank again....
@timklein3962
@timklein3962 4 года назад
GREAT video; you cover all the bases; thanks !!
@tunespt
@tunespt 12 лет назад
you are by far the most useful mechanic on yt!
@bmorain
@bmorain 12 лет назад
I was looking for information on doing a compression test on the exact car you featured in this video! Love my CR-V but it needs some help, thank you for a great video!
@cesargarduno7999
@cesargarduno7999 Год назад
Thank you Eric well explained and the reasons why, excellent video thanks for the help.
@CopybutNotPaste
@CopybutNotPaste 6 лет назад
from 500 subs to 1.2 Million, damn! Congratulations!
@JamesofJesus
@JamesofJesus 12 лет назад
good videos...its you and scotty kilmer head to head now..oth of you are very well explained and presented...Blessings
@precool
@precool 10 месяцев назад
Hey thanks for the educational video my friend. Relevant to me right now because I'm having a new head put on my MINI Cooper S. Two very toasted valves, and my plugs looked even worse than what you had right there. Excited to be back on the road soon, with more knowledge thanks to you!
@anthonysilva5015
@anthonysilva5015 4 года назад
about to inspect a boat tomorrow, thanks for the insight!
@tribal9760
@tribal9760 9 лет назад
I liked it and injoyed it. Looking forward to seeing move of your work.
@darrylcampbell4411
@darrylcampbell4411 4 года назад
awesome vid bro. real good explanations. cheers. from 10 years later.
@flayv999
@flayv999 3 года назад
this is one of the most educational videos ive ever seen
@RedEyedJedi
@RedEyedJedi Год назад
Literally the best auto technician on RU-vid. Also, a damn good teacher. Having amazing knowledge of a subject is one thing but being able to spread that knowledge is something even better.
@WickedG5150
@WickedG5150 Год назад
Scotty Kilmer.
@RedEyedJedi
@RedEyedJedi Год назад
@@WickedG5150 Scotty is also good but he's not as good as Eric if you actually watch his videos and the level of detail he goes into.
@WickedG5150
@WickedG5150 Год назад
@@RedEyedJedi right, in his videos! Scotty has 50+ years experience working on internal combustion engines. If you can contact him, you will see that Scotty is just better and has probably seen every type of problem with an engine. Eric struggles to diagnose some of his problems with engines. Get in touch with Scotty via email and you will see that he is just more knowledgeable. Period.
@WickedG5150
@WickedG5150 Год назад
@@RedEyedJedi also, does Eric ever author a book? Has Eric ever received an Emmy award for an automotive television show? Does he have an education including a Master’s degree? Get the fuck outta here or shut the fuck up.
@WickedG5150
@WickedG5150 Год назад
“Best auto technician”. Lol he’s a tech! Not an ASE Certified Master Mechanic. Scotty holds many different credentials and is an ASE Certified Master Mechanic.
Далее
How To Perform A Leak Down Test - EricTheCarGuy
27:34
How To Perform a Compression Test - [EASY]
12:02
Просмотров 57 тыс.
Tanghulu Cotton Candy
00:31
Просмотров 17 млн
100❤️ #shorts #construction #mizumayuuki
00:18
Просмотров 16 млн
ONE MORE SUBSCRIBER FOR 6 MILLION!
00:38
Просмотров 3,8 млн
The BEST Way TO Perform a Parasitic Draw Test
10:49
Просмотров 4,1 млн
Fuel Pressure Test
8:52
Просмотров 1,6 млн
How Does a Torque Converter Work?
19:59
Просмотров 4,1 млн
How To Find Suspension Noises 101 - EricTheCarGuy
23:57
Ремонт тросика на велосипеде
0:36
Осторожно 🔞 бизнес такси
0:59
Ремонт тросика на велосипеде
0:36