How to do Printhead Reverse Flush & Different Cleaning Solutions for Maintenance DTF Printers

Подписаться 13 тыс.

Просмотров 11 тыс.

50% 1

#KingdomDTF
📺 Subscribe To My Channel and Get More Great Tips
ru-vid.com?...
👍 Support Group
/ 1432671203560213
In this video, we show you different cleaning solutions and give you a printhead cleaning tip. Don't forget to check out our DTF Supplies and DTF Printers, you can do cotton, polyester, blends, spandex, flex, etc. Our most popular and affordable DTF Printers are perfect for use for a hobby of all sizes, from homes to small businesses to start scaling up. DTF is of exceptional quality and choice that prints on dark and light t-shirts.
If you like to support us in one way or another, consider getting your supplies and equipment from us through the links below. Check out the links below for DTF Printers & DTF Supplies, Waterslide Paper, and DTG Supplies.
_________________________________________________________
DTF SUPPLIES & DTF PRINTERS
► DTF Printers: kingdomdtf.com/collections/dt...
► DTF Inks: kingdomdtf.com/collections/dt...
► DTF Transfer Films: kingdomdtf.com/collections/dt...
► DTF Powder: kingdomdtf.com/collections/dt...
► Bundles: kingdomdtf.com/collections/bu...
► Supplies: kingdomdtf.com/collections/su...
► Software: kingdomdtf.com/collections/so...
► Parts: kingdomdtf.com/collections/parts
► CISS/Ink Cartridges: kingdomdtf.com/collections/in...
► Printing Partners: kingdomdtf.com/pages/creator-...
► DTF Transfers Sample: kingdomdtf.com/collections/dt...
► Financing: kingdomdtf.com/pages/financing
► DTF Consultation and more: kingdomdtf.com/collections/se...
►► CADlink DF 10 Trial kingdomdtf.com/products/cadli...
_________________________________________________________
AFFILIATE PROGRAM
Make money easy with our affiliate program. FREE to register and easy link & code to share!
► Affiliate: kingdomdtf.com/pages/affiliate
_________________________________________________________
WATERSLIDE PAPER
► kingdomdtf.com/collections/wa...
_________________________________________________________
DTG PRINTING & SUPPLIES
► kingdomdtf.com/collections/dt...
_________________________________________________________
FOLLOW AND LIKE US ON SOCIAL MEDIA
► WEBSITE: KingdomDTF.com
► FACEBOOK: / kingdomdtf
► INSTAGRAM: / kingdomdtf
► SUPPORT GROUP: / 1432671203560213
► Email me for business at sales@KingdomDTF.com
_________________________________________________________

Опубликовано:

21 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@josekartelprints1 Год назад

Great video how to clean the printer heads 👍🏼👍🏼👍🏼

@KingdomDTF Год назад

Thanks for watching

@fernandolanderos4600 10 месяцев назад

Good informative video

@jennaemcquivey8400 8 месяцев назад

I have just purchased your cleaning solutions and hope that it will help my issue. I have a clog in my #4 ink channel.

@stamposetogr8441 Год назад

when I do the daily check of the nozzles and cleaning of the head, I see that some of the white lines have been replaced by black lines, also sometimes the dumpers of the white have a dark color inside, I changed a new head, a new dumper and the capping station pump is fine, for a year I had no problem

@reginahardaway7454 Год назад

can you do a reverse on the xp15000? I am unable to get any colors to print.

@humbertoburga8898 Год назад

HOLA BUEN VIDEO SALUDOS.

@KingdomDTF Год назад

Gracias por vernos

@henrymartinez6132 Год назад

When would you be restocking boss?

@164hercules Год назад

Great video. And I will be ordering soon. I cleaned my print head and reinstalled it in my L1800. Now the front power light is not on but the back power light is on and it is beeping. What does that mean? It stated doing that once I sent a print.

@pbjTShirtCo Год назад

I did the same thing. I got liquid where the ribbon cable plugs into the print head. Burned the print head and motherboard. It’s repaired now with new motherboard and print head but it was an ordeal and doesn’t print like it used to. Good luck.

@merryg3774 Год назад

Ive got a question... So I used cleaner to push through the tips at top of print head to see if were clogged. Well I'm guessing some was and i wasnt paying attention that it came over and did get on the board part underneath. I didnt connect back cause figured id make sure over night it dried good. So I left it out and left printhead sitting in very tiny bit of solution to not dry out but so board could dry. Will that be ok you think?

@KingdomDTF Год назад

You can not wet electronic parts, it can damage the printhead.

@jjs9017 Год назад

Hello!! Did you have any experience on unclog a VJ mutoh 628D print head ??

@KingdomDTF Год назад

To be honest no, but maintenance and unclogging process are the same or similar since they use Epson heads.

@trishahillegass Год назад

how long or how hot do you get the mixture?

@KingdomDTF Год назад

Hot to your touch, not boil.

@Carlos-ru4zt Год назад

@ kingdom are your print heads new OEM ?

@KingdomDTF Год назад

For L1800 90% new, they are recycle and with nozzle tested.

@NERO-ez1mn Год назад

it will loose the gold plate on the printhead i advise using a hypersonic cleaner much more safer

@shyams2978 Год назад

What if I went to vacation for more than 10 days any solution for that

@KingdomDTF Год назад

Yes, there is one Red Solution that keep printhead moist for 30 days according to the maker.

@keykey5598 Год назад

What if my ink is going into the other channel

@KingdomDTF Год назад

Mixing? Clean it good, but if do the same again something bad happened to the head that is sending 1 color to the other channel. At that point could be damage and you need replacement.

@daisychick112 Год назад

DO NOT DO IT!!!!!! FRIES THE MOTHERBOARD AND THE PRINTHEAD!!!! I HAVE DOZENS OF ORDERS AND MY PRINTER IS FRIED. BEEPING, WON'T POWER UP. I NEED TO RE-SOULDER THE MOTHERBOARD AND REPLACE PARTS. I AM BEYOND MAD, I WAS ******CAREFUL******I AM DESTROYED. DO**NOT**DO***IT

@KingdomDTF Год назад

If you use too much liquid and you push too hard you can blow the head and damage everything. You need to know how to do it and have patience when it comes to cleaning and maintaining your printers.

@daisychick112 Год назад

@@KingdomDTF I am very gentile. It was shallow, and I was careful, yet still my printer is blown up. I now have to re-solder my board and hope I’m not out $$$ of dollars replacing it.