HOW TO DRAIN COOLANT ON FORD EDGE 2007 2008 2009 2010 2011 2012 2013 2014

Подписаться 977 тыс.

Просмотров 78 тыс.

50% 1

HOW TO DRAIN COOLANT on FORD EDGE. RADIATOR DRAIN PLUG LOCATION
In this video we will show you how to drain the coolant on Ford Edge first generation 2007-2014. We demonstrated how to drain the coolant on 2009 Ford Edge with the 3.5 engine.
This video might be helpful on:
2007 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2008 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2009 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2010 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2011 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2012 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2013 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
2014 Ford Edge How to Drain Coolant V6 3.5 3.7 2.0. Radiator Drain Plug
Products used in the video:
► Tool Set: amzn.to/2MLRsuN
► Makita Impact: amzn.to/2D8CiuS
► Offset Box Wrench: amzn.to/2MUqVLX
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Авто/Мото

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@AutoRepairGuys 5 лет назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@robertingram2820 9 месяцев назад

Good Video! Decided to raise passenger front side. Do not remove debris guard. You will see and access coolant drain plug from inside engine compartment, open hood, use flashlight, for the white colored "nut" as indicated video. 19mm socket, 3 inch extension and ratchet wrench will reach and loosen plastic nut. With car jacked up on passenger side, gravity causes most of the old coolant to drain directly down from drain plug. Flat oil recycle plastic tub will catch all liquid.

@CurtisG53 5 месяцев назад

Can I pour distilled water into the resivor tank to completely flush out the radiator ?

@trimalo3762 Год назад

Yall are the best actually say hiw and what needs to be done correctly. Always watch your videos. Thank you for everything.

@HeWearsGlasses 5 лет назад

Thank you for your video, I was able to complete this job myself today with your help! 👍🏼😁

@danielmorrison1660 4 года назад

You guys are awesome! Thanks for posting this and setting my mind at ease. I get nervous trying to do repairs myself because I’m not very experienced. Videos like this help me do maintenance with confidence.

@bokshow5282 Год назад

Could you do a PTU drain and fill on a 2013 Ford Edge Limited?

@rodbeechey190 2 года назад

Nice video. Appreciate it

@zmanvideo1 5 лет назад

thank you for posting this!!!

@eyeorewolf Год назад

Funny my 2014 had 7 screws and three clips in the cover. Someone had been there before and didn't put all the fasteners back in. This is why I do my own work whenever possible. Oh a note of caution for anyone trying this. You will see a larger plug facing downward that takes a 14mm allen key. That plug is in the AC condenser. If you remove it you will release AC refrigerant and pag oil, not something you want to do.

@beagledad3814 5 лет назад

Now how flush it ? And replace it?

@razorburns8651 Год назад

Thank you.

@RainorShine1 Год назад

Dumb question, I think I have a plug on my passenger side on my radiator can I use that one too? An not this on on driver?

@Brownnproud91 4 года назад

That reservoir was overfilled by alot. You have to put it at cold fill like so you have room for expanison

@parrishmooneyham6095 3 года назад

hey guys, I have a quick question.. Total capacity of antifreeze is stated to be like 12 qts (3 gals). Looks like you only got about 1 gal out from the 'drain' process. That means you have 2/3's of old (of possibly bad) antifreeze left in the vehicle. Shouldn't you re-drain and re-fill again another time or 2 to get have 'more' new antifreeze than old?? I DO understand the if this 'drain & refill' is done per recommended maintenance schedule, then the 'drain & refill' may be fine.. But I have a 2011 Edge with about 74K miles that I'm not sure if the prior owner performed this drain & refill. SO i may have to perform this 2 or 3 times just to get the majority of the old antifreeze out. Good video though, I will be removing that initial debris guard to gain better access to the plastic drain nut ;).

@percymengaofficiel332 3 года назад

Thank you so much

@stevesherlock5334 2 месяца назад

Is this the same on the 2016?

@jeffmerz3595 Год назад

Leave it to Ford to make accessing a simple maintenance function an absolute cluster f

@MA-jx6in 5 лет назад

Thanks for the video

@larrybuenaflor9775 3 года назад

Why i have coolant temperature hot and after i shut off A/C compressor switch temp. COMEBACK TO NORMAL?

@AllAmericanGuy01 3 года назад

My coolant level is just below the minimum line. Is adding new coolant okay or should I drain the entire system first? I’ve been getting mixed responses.

@johnnyzlomke2630 3 года назад

It really depends on how long the coolant has been in your vehicle if it's been in there for over a year I recommend Flushing but if it's just ranlo adding more coolant is okay

@TiffanysAngel2000 2 года назад

Hello! I have a 2008 Ford Edge Limited and wanted to do a coolant flush but am getting mixed answers on what coolant I need to replace with. Can I use a universal coolant? I was looking at the Gold Peak Original Equipment Technology Antifreeze + Coolant for North American Vehicles. Would that be ok to use? If not can you give me a suggestion for a replacement for my vehicle? The coolant cap says that I should use a yellow coolant so I just don’t want to mess anything up. Thank you!!

@rhurtadorh32 Год назад

No donot use a universal. Motorcraft came up with a new antifreeze for ford vehicles its like light greenish yellowish coolant color.

@RainorShine1 Год назад

@@rhurtadorh32 i have 2013 Ford edge limited an it has orange coolant

@godovermoney1124 Год назад

@@RainorShine1 me too. "Ford Orange"

@godovermoney1124 Год назад

@@rhurtadorh32 nah it's Orange

@rhurtadorh32 Год назад

@@godovermoney1124 no. Factory old coolant is orange.‎VC-13DL-G this coolant item replaces that old orange coolant. OAT is the orange color old coolant as to the new yellowish green is POAT.

@don7680 Год назад

The coolant system takes 11.7 liters. How about the rest of the coolant?

@MA-jx6in 5 лет назад

Drain and fill 4 to 5 times and it's 95% done

@Brownnproud91 5 лет назад

Thats what i do on my 13 edge 3.5..gotta chamge fluid often cause the internal waterpump goes bad its game over..ruined engine

@traytonking3041 3 года назад

@@Brownnproud91 how does changing the antifreeze often help your water pump life expectancy?

@Brownnproud91 3 года назад

@@traytonking3041 okay so there pump on all 3.5 and 3.7 Ford engines have an internal chain driver waterpump. Basically if the waterpumo gasket fails then the coolant is dumped into the oil pan and the oil pump will pump the mixed oil and coolant throughout the whole engine and ruin your engine. So in theory changing coolant frequently helps keep the gaskets from becoming brittle. Old coolant becomes acidic and acidic eats away gaskets..also fresh coolant has great lubricate properties and keep bearings within pump from seizing. Also on the oil side on these engines it very important to run a quality 5w20 full synthetic oil to help lubricate the chain sprocket and seals that are on the oil side of waterpump. Trust what I am saying. These 3.5 and 3.7 have 2 weep holes that leak coolant out of the engine. One of them leaks above the alternator area and the other leaks above the engine by the V of the engine and can be seen from above with a flashlight. Usually if you catch the failing waterpump ahead of time you can replace the waterpump before it dumps coolant into your engine. 2007-2010 ford edges had an old style pup with 1 seal and 1 sprocket and the 2011-2014 had a improved waterpump design with dual layered gasket ad dual sprockets but still are prone to fail if coolant is not changed often and oil isn't taken care of.

@mygt8a4re 2 года назад

@UNKNOWN for those researching, do an oil analysis at every oil change, collect a sample and send it in. There are several well known analysis companies such as Blackstone. They can tell if there are traces of coolant in your oil very early, much earlier than anywhere you could look or detect it yourself. Your water pump won't just fail overnight. It starts with a trivial leak that slowly becomes worse over time until it has leaked enough coolant into your oil to cause internal damage. If you change your oil often and do the analysis every change you can catch it before it becomes catastrophic. It won't ease the $2k bill of the water pump/timing chain swap but it will save you the cost of a new engine! Good luck!

@mayken6661 2 года назад

@@traytonking3041 true, they’re trash and go out anyways. Hell of a job to replace

@darrenwoloshyn 4 года назад

There is no 2006 Ford Edge. The First year the Edge was introduced was 2007.

@dirtybandit7022 3 года назад

You missed the whole point of the video dipshit

@x91iNFINITi Год назад

the 07 was introduced in 06. The 14' the last year for this particular model. That was in 2013. That's what he meant. He just got to technical that's all. 😄

@stelvis40 3 года назад

That face @ 420 👻

@dianalane1655 4 года назад

Ok well I assume your just showing us how to replace coolant because this is not the way you would do a coolant system flush which would require coolant flush and distilled water and then refilling with antifreeze it make more sense to show us how to do a flush because why replace the coolant without flushing out the system. I'm just saying