HOW TO- Dyson DC14/DC07 motor change- EASY PEASY LEMON SQUEEZY 

You are very good at this type of video. Very comprehensive and easy to follow. Nice work. Thank you!

Best instructions so far.... I have dc07 with clutch.... Worked for me thankyou

Very clear and complete instruction. Helped me very much, especially getting the brushes back on the belt - used your foot method! Thank you!

Used this video to replace brushes,easy to follow good closeups and completed the job without any problems. First class.

The method is simple, the presentation is confident and simple. Just genius!! I am just going to change the motor now.

Just changed my motor, anther vacum saved from the scrap pile. Very helpful video and very good explanation. Thanks

Great video. I decided to buy a DC14 with a blown motor and have ordered a new motor to fit to it. This video will be handy to remind myself on how to do it once I have the motor. I have never changed a motor before but I feel confident enough to do it now

You deserve more likes for this. My DC14 is in for a new motor; £85 all in, incl. filter etc. That seems alright.

Very helpful video. Clear step by step guide. Many thanks for making this.

Thankyou so much for this video. It just helped me replace the clutch in my wifes Dyson Animal. First replacement since we bought it about 30 years ago.... amazing!

This was a god send to me when I had to change the motor. Many thanks

This is a great simple explanation of what to do. I took my DC14 apart yesterday evening and ordered the new parts - good tip with the clutch change out too, I've gone for that. Cheers!

Good video, I got a DC07 motor to do so have to build up the courage.

Thanks mate. Perfect instructions. Just changed the lower motors with belts on mine. Video came very handy

Thankyou so much. I was able to diagnose broken drive belt. Excelleny video very helpful.

Thank you, I now know how to replace the motor on my DC07 animal. I think it is the brushes that have worn out as it's 21yrs old now. Good tip about getting a new clutch as it is a bit fiddly to replace the drive belts, and not that much more £'s for the time and effort saved.

Great guide,very clear,hoover up and running now,thanks!

Well presented and described. You even edited out the swearing, the threats to throw the stupidly designed lump across the room and the really fiddly bits. But you helped a lot. I did a DC04 a few years ago and it was simple compared to this. Why does Dyson not design for easy maintenance. I mean, who in their right mind, designs a motor, which does not have replaceable brushes. As a design engineer, I always used to look at how easy it was going to fix. Today’s disposable society I suppose.

Very good! Straight to the point.

Good work thank you. DC07 motor changed.

Thanks. Really clear video. 👍

Why are you not popular?!

Well done for a great video. Your feet at the end was hilarious .

Hi, EXCELLENT Video, WELL DONE ! My DC07 doesn't have a clutch. Will I follow everything as shown but without the clutch ?

Great information thanks I'll buy a motor and try this thank you

HELP PLEASE! Best tutorial video I’ve seen. My dc14 wouldn’t start, no power. I changed the switch, didn’t work. So, I put in a new motor with your video help. Still won’t start! Going to replace the plug on the cord. The internal wiring looks fine, so I’m not sure what’s up!? Won’t power on…any suggestions? Thanks Jim

You sir, are a Boss! 💪

Would glueing the motor suction duct( the one that connects the motor to the chassis) without the seal be fine? The seal has perished and I can't seem to find any good ones.

The release catch on the cyclone causes it to not click back on the machine properly. Do you know what it could be?

Is it normal for new clutch belts to feel a bit tight to move?

Here now! :):)

I am sucker for Dyson hoovers

Oh, by the way I think the clutch belt from the clutch to the brush bar is wrong. It should be the thicker belt but it looks thin. I’m sure it works fine they are very hardy machines but I’m just letting you know 😁.

EXCELLENT VIDEO. I NEED TO REPLACE THE MOTOR IN MY DYSON DCO7 ORIGIN. PROBLEM IS WHICH ONE IS THE BEST AND MOST RELIABLE? APPARENTLY THE MOTORS MADE IN CHINA ARE NOT VERY GOOD QUALITY.

Hi, I just tried to remove the deep screw requiring the long mort 15 and the screw just turns in the hole without loosening. The guard remains tight at that point. There's no way I can get anything down the hole to deal with this. Any advice apart from cutting away the plastic leading to the screw. Cheers

How the motor and wiring connectors should be located is missing in this video

I've find that the qualtex clutch belts are too tight when using the belt lifter tool resulting in making a mark on it. Would heating the belts up make it easy to warm up?

The DC14 bin catch is loose. I took it apart and fitted it again, but the issue hasn't gone. Do you think the whole chassis beeds replacing?

I can't seem to reconnect the U shaped tube at the bottom right after taking care of a clog. Any tips? It keeps coming undone when I move it from the upright position.

I replaced my clutch and my brush still doesn’t work on my dc07. I’m the hose still sucks. I assume the spindle drive on the motor is bad. Should I replace?

The wire in the motor housings keeps coming apart resulting in the machine not turning on. This is the first this has happened to me. Is there any way?

Howdy, motor gone on mine do you know if the dc33 one is the same? it has the longer armature for the belt. Thanks!

Is it essential to use Vaseline inside the motor housing or is it better to just use it on the motor seal?

Which part do you find a bit hard to put back in?

Hi I've changed both filters but the bottom suction is not working. The motor feels hot and I've cleaned all the pipes. Weird thing is the The telescope suction tool works fine . What can need fixing?

Do you find taking the cable off so you can work on the motor or by leaving it?

Have you used any of the motors that have the internal thermal cutout?

That’s why changing the motor on a DC01 is dead 💀 easy because there’s no clutch! Easy like carrot 🥕 cake 🍰! WHAT?! DID I JUST HEAR 👂🏼 VASELINE?!?!?!?!

Is it normal for DC14 cyclone seals to stick out a bit? Also the bit where the bin trigger sits feels a bit bumpy. The cyclone looks ok though.

0:50 Are they changeble as mine are chewed up?

Is the MTR299 which is sold on Ebay by Qualtex same quality as the one that Manchestervacs supply?

Is it the same motor for the Dyson DC27? Is the method much the same?

My DC04 feels weak when reclined. It feels strong when upright. Filters have been changed, the internal hose is fine as well. I've checked all seals. Still nothing. Do you know what it may be?

My dc14 suction isnt as strong as it was after replacing the motor.

I've seen some Dyson YDK motors with the blue cutout thermostat. Are they the earlier ones?

hello parwaz786 my vax power nano just die the and have nice day

I cut my finger trying to get the new motor in but the job is just more fiddly than anything

I find the pattern motor wires a bit stiff to move around. Would slightly heating them up work?

I bought a Dyson motor and one side of it is a bit bent. Is there any way to unbend it? It's the bit that sits in the motor housing seal.