How to Engraving and Cutting Acrylic step by step | Sign Name | CNC 3018 Pro

Подписаться 1,4 тыс.

Просмотров 16 тыс.

50% 1

Hello Everyone, welcome to
TND CRAFT CHANNEL
Project This time:
Acrylic Sign Name.
Hello friends, this video shows how to make a led acrylic lamp.
How to make acrylic engraving and cutting. By using a 3018 pro CNC machine and 3 mm acrylic material, the acrylic will be processed according to the GCode that we made.
I made GCode using Vetric Aspire software, cutting tools using V Bit 30 degrees, endmills 1 mm and 3 mm for acrylic cutting.
For this cnc machine 3018 pro is qualified, and more than enough for acrylic engraving and cutting.
Acrylik Engraving and Cutting with CNC 3018 Pro.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Machine = CNC 3018 Pro
Tools. = Endmill 3 mm (Cutting)
Endmill 1 mm (Engraving)
V- Bit 30 ° (Engraving)
Material = Acrylic 3 mm Thickness
Software = Vetric Aspire 9.5
Firmware = GRBL 0.9
Control. = GRBL 0.9
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Disclaimer :
*** Be careful in using the work machine, safety first, is not responsible if an accident occurs because of an incorrect operation of the machine.
Please Comment, Like, Subscribe and Share, Thank you.
#laserengraving
#cnc3018pro
#cnc3018
#cncengraving
#cncdiy
#cncproject
#acrylicengraving
#acryliccutting

Хобби

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@Jozekmi 2 года назад

Witam -bardzo dziękuję za zamieszczenie filmu perfekcyjnie wytłumaczone, jestem pod wrażeniem. DZIĘKUJĘ I POZDRAWIAM

@centralseac 2 года назад

Just did a trial run on a piece of acrylic, your settings are perfect, came out great. Thanks a lot

@tndcraftchannel127 2 года назад

Thank You Bro !

@centralseac 2 года назад

@@tndcraftchannel127 Do you use the same settings on all your pieces_ I used a 0.75 mm endmill, some slightly jaggered edges but very pasable. Maybe dropping the speed a bit would fix it?

@tndcraftchannel127 2 года назад

You must try,

@marklaurence8504 3 года назад

Fantastic video, love the extra comments , when to change bits , clear Aspire tutorial

@nafouus 2 года назад

Bro really thank you

@tndcraftchannel127 2 года назад

Youre Welcome bro

@hamadaali5687 3 года назад

amazing video, i am really new to this. i am just starting to learn ASPIRE. i did everything you did in the video, but when i load the g code to candle and press send all X Y Z axis move very very very slow slow. modeling resolution is ( standard )fastest, any idea what am doing wrong, the bits that am using are the ones that came with the cnc pro 3018. thanks in advance )

@omarhussain2899 4 года назад

Hi your work is amazing! Does your cnc router 3018 pro cover a work travel of a A4 sheet size. For example would the cnc engrave and fit in to a A4 size acrylic sheet. Thanks

@tndcraftchannel127 4 года назад

Hiii... For Dimension of A4 size cannot fit (210x297 mm) . Because the size of the aluminum table bed is only 300x180 mm. And the actual travel is only about 280x160 mm for the X and Y axes. And For the Z axis it is only 40 mm.

@flavianojose8423 3 года назад

hey there, hope you are doing great, please tell me what are the settings that you have used for your 3018 cnc, like feedrate speed, rpm speed, depth of cut, i am new to cnc and i have already wast a lot of acrylic by failing my cuts, its always meltings, i bought as well the HQ Master bit for acrylics and its not working, please any help?

@tndcraftchannel127 3 года назад

I Think, the matter from your Acrilic

@flavianojose8423 3 года назад

@@tndcraftchannel127 Thanks for your feedback

@tndcraftchannel127 3 года назад

Cast acrylic is best recomendation

@aimenehabaieb Год назад

@@flavianojose8423 try to make a depth of cut that it too little

@pangestughema2415 3 года назад

mantapp🙏🙏

@tndcraftchannel127 3 года назад

Thank Youuu

@hammadrabadia 3 года назад

What is the capacity of this machine for cutting acrylic like 4 mm or 5 mm or 6mm

@josvanhoof7616 2 года назад

Hi, Nice video. What settings did you use for cutting the acrylic? Speed,feedrate and plunge.

@dencio1976 4 года назад

Where did you buy the base where your acrylic is mounted on?

@tndcraftchannel127 4 года назад

Hello, I bought it. Try looking in the marketplace "acrylic lamp holder"

@dre5973 2 года назад

Because you are using separate files and different bit how do you keep everything in line, mainly cutting of the acrylic, after you engrave you move the machine but when you run it it cut exactly where the engraved mark is.. cause I tried to make a keychain with 2 different files and it went to wrong place to cut

@tndcraftchannel127 2 года назад

Before all processes run the machine, have you zeroed the X Y Z coordinates ( Datum xyz )?

@reynaldibagas7215 2 года назад

Tanya dong bang, kan saya baru beli, baru tes pakai file nc bawaan, kalo posisi mata endmillnya itu pas diatas bahan yg kita cutting atau ada spacenya bang ? Antara endmill dan bahan sebelum di run, soalnya beberapa file nc dari bawaan yg saya coba cuttingnya ngambang semua dari bahan, ada yg terlalu masuk juga

@tndcraftchannel127 2 года назад

Biasanya Mata Endmilnya sama bahan di sentuhin pake kertas bang, kertas coba ukur ketebalan, biasanya 0.1 mm. Jadi kertas tempelin ke bahan. Trus endmill/spindel sumbu Z deketin ke kertas tadi ampe kertas kejepit dan gerak dikit. Itu 0.1 mm sumbu Z di atas bahan 0.1 mm. Masukin parameter sumbu Z + 0.1 mm. Begitu kira kira ya

@reynaldibagas7215 2 года назад

Makasihh bang, hehe request videonya bang next terimakasih banyak ya bang

@tndcraftchannel127 2 года назад

Youre Welcome bro

@MikeSmith-pc9nr 3 года назад

Any reason why you didn't reverse engrave this?

@tndcraftchannel127 3 года назад

What it means?

@MikeSmith-pc9nr 3 года назад

You engrave it in reverse then the acrylic is smooth from the front, I do similar signs but I reverse engrave them

@tndcraftchannel127 3 года назад

For better results, yes. ☺️

@reynaldibagas7215 2 года назад

Bang tanya, kalao divdeonya abang yg inikan tanpa media kertas, berarti kita ckup ngepasin endmillnya sampai nyentuh avrylic terus dites sampai kegores dikit gt ya bang ?

@tndcraftchannel127 2 года назад

Iya betul bang, sy gk make kertas. Sama aja cuma beda beda dikit. Kegores dikit katakan lah udah makan 0.1 mm alias Z=-0.1 mm dr atas benda kerja ya

@reynaldibagas7215 2 года назад

Makasih mas, banyak belajar dari channel ini

@tndcraftchannel127 2 года назад

Okoke.. Sukses ya Buat kamu

@reynaldibagas7215 2 года назад

Banh ijin tanya lagi, itu buat grafir tulisannya pakai endmill 1 mm atau vbit 30 bang ? Diketerangan sofrware aspirenya pakai endmill 1 mm soalnya bang

@tndcraftchannel127 2 года назад

Sy pke Endmill Mas e, endmill 1 mm, cuma untuk kasus buat tulisan di video ini ya, karena apa? Karena Tulisan nya kan Besar2 itu, klo pke Vbit 30 degree, gak kelar kelar.. 😉

@lennyvalensia6588 3 года назад

Mantap nih..beli dimana mesin seperti ini? Toped ada gak? Merk apa bang?

@tndcraftchannel127 3 года назад

Banyak di Tokped, nama nya CNC 3018 pro

@lennyvalensia6588 3 года назад

@@tndcraftchannel127 yah td barusan tengok bang..bingung mana yg bener..harga beda beda..boleh rekom yg mana gk bang?

@lennyvalensia6588 3 года назад

@@tndcraftchannel127 spek beda beda..ada yg include laser ada yg tidak..walah😁😁

@tndcraftchannel127 3 года назад

Iya bro, memang ada yg paket laser juga, ada yg mesin aja, sesuaikan budget aja mas bro

@tndcraftchannel127 3 года назад

Beli Mesin CNC Router CNC 3018 Pro Router Drilling Engraver with ER11 tokopedia.link/3RLqqkNz9ab di toko Preciouss Shop Rp1.491.950 di Tokopedia dengan Bebas Ongkir, Sekarang!

@michaelcostanza9394 3 года назад

I HATE when someone makes a video to help others and then just breezes thru it with no explanation. If we all knew what was going on we wouldn’t be watching the video.

@tndcraftchannel127 3 года назад

Hi, is the content of the video that I made unclear?