How To Epoxy Coat Your Garage Floor | Must Watch For Diy'rs

Подписаться 292 тыс.

Просмотров 1,7 млн

50% 1

#Epoxygaragefloor #Garagefloorepoxy #Mikedayconcrete
LEARN HOW TO EPOXY YOUR OWN GARAGE FLOOR HERE:
mike-day.mykajabi.com/offers/...
This video will show you how you can apply a tinted, 100% solids epoxy coating to your garage floor. I show you how to prep the concrete floor, how to remove an existing coating or paint, then how to apply the primer coat, colored epoxy coating, and a urethane top coat to protect the epoxy.
This is the best way to install an epoxy floor coating to your garage floor. If you're thinking of installing your own epoxy floor coating, this video shows you the steps involved and the process it takes to roll on the epoxy.
My crew and I are epoxy coating experts. We install epoxy floor coatings for our customers garages, shops, basements, showrooms, and much more.
My epoxy coating course teaches you exactly how my crew and I install epoxy coatings in garages just like the one in the video.
The course also shows you all the tools and supplies you need and the best places to get them. It tells you what I use for epoxy and why it's my favorite.
MY PRIVATE MEMBERSHIP - THE CONCRETE UNDERGROUND
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE: FOR SOLID COLOR FLOORS
mike-day.mykajabi.com/offers/...
HOW TO INSTALL AN EPOXY FLAKE GARAGE FLOOR COATING COURSE:
www.theconcreteunderground.co...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
FLOOR FINISHING POWER TROWELS:
amzn.to/3abyIAf
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Хобби

Опубликовано:

16 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 753

@stevegannaway1787 3 года назад

Thank you for taking the time to create this video. Very helpful!

@jayjaybmgvlogs3025 2 года назад

Mike following for 1 year and i wanted learn how to epoxy coating on concrete n i see you daylie foing videos pouring concrete cux i do concrete n im just proud ur my teacher again glad see u have 1 mil more views on this video love your worlds n help thanks you

@thomaslotito380 4 года назад

Mike, you’re a pro, I appreciate your expertise and help in your videos. Thanks! Much success!

@MikeDayConcrete 4 года назад

Thank you!

@woodlandburl6648 4 года назад

Great job. Looking forward to doing this on my garage floor.

@MikeDayConcrete 4 года назад

Makes it brand new again.

@mrt2734 Год назад

Floor came out awesome, big transformation.

@kurtzbradley 2 года назад

You guys always make it look easy……like the squeegee…I am sure getting that spread evenly is very difficult. Get it on uneven and then what. Prep looks tedious…and very important. You guys excel at everything I watch you do.

@w04mach1 Год назад

I subscribed after watching this video, and another before this. Thank you for the quality info. Always great to see someone who takes pride in their work. 👍

@flipflopsneeded 2 года назад

Great straight to the point with a lot of honesty. Thank You Sir!

@solarflare4259 Год назад

Thank you Mike! will start doing my new built 370sq ft garage floor this afternoon...

@sGhost-er2up 2 года назад

I love you guys’ work flow. I got hired last week at a local company and every work day is hectic bc i work with a guy who has me do everything except roll which I understand. I know im learning but i think he just wanted someone to do everything for him. I get it. I want to learn as much as i can and then quit and subcontract for someone else. He also skips steps like acid etching or washing concrete. He also doesn’t add primers.

@Openthrottlerc 3 месяца назад

Acid isn't always a must but primer is.

@sydewayzmo3905 2 года назад

Beautiful work!

@DIRT-BOSS 4 года назад

Wow what a difference! Nice work Mike

@MikeDayConcrete 4 года назад

Thank you!

@user-fb8jb5yi6g Месяц назад

I resurfaced concerte first. Used etching. Then primer, then epoxy, then sealer. Works great.

@RenegadesGarage 4 года назад

Mike Day Everything About Concrete.. Now I just need you guys to come do my garage floor... That would be awesome!!!

@ConcreteFloorSolutions 3 года назад

Bravo for preparation. You are one of the few people that shows diamond grinding as preparation. Great job installing the prime coat also. That looks like a very durable floor. you did a great job

@MikeDayConcrete 3 года назад

Thank you!

@khazma2005 4 месяца назад

@@MikeDayConcrete what epoxy coating did you use before the clear coat? Can you recommend the products?

@gabedelreal86 17 часов назад

What company makes the material you used for this project and if it’s a new garage that was poured less than a year ago, do I still have to grind or can I just drop an etch liquid?

@david.thomas.108 3 года назад

Professional job, detailed to a high standard, thanks for sharing.

@MikeDayConcrete 3 года назад

Thanks David!

@manuelolivares7254 3 года назад

Question if you put on your driveway how long it last south texas heat

@magdalens824 3 года назад

Great video. Thank you for all the info!

@MikeDayConcrete 3 года назад

My pleasure!

@joelsalto2731 3 года назад

I'm glad I seen this video, I bought some 1prt epoxy paint and some clear epoxy from the big box stores, I wasn't even going to use bonding primer lol thanks for the tips

@EliteCreteSystems 3 года назад

Great job Mike!

@billshreeveable 4 года назад

Thanks for sharing your experience and knowledge, gonna do this in the spring.

@MikeDayConcrete 4 года назад

Thanks Bill. Are you a subscriber to the channel yet?

@kennytang3826 3 года назад

Hi Mike, Do you recommend grinding the garage floor in a brand new house? Thinking of epoxying the floor before moving in.

@johnfoge1742 4 года назад

Very professional vid.🏡

@aarongarcia1101 2 года назад

I installed a kit from Lowes, didn't do any of this grinding or prep, and its been nice and shiny for going on 5 years now

@Mr67Stanger 3 года назад

Looks awesome!

@nexamax 3 года назад

That's a FANTASTIC tutorial step-by-step, Thank You! Now I need to get some spiked shoes! How much do you charge in your area for a 750 sqft garage for the job advertised? Looks like a 2-3 days project.

@sportdrinkfruitpunch 3 года назад

Amazing work.

@MunkieFeet 4 года назад

Great video Mike. Does this stuff spread the same as driveway sealer?

@astroplutonium 4 года назад

Damn thats some fine smooth job you done there.

@MikeDayConcrete 4 года назад

Thank you

@mantaship 4 года назад

Mike, I have a dry cleaner/ laundry. Do you show in your course how to prep for chemicals that may be in concrete?

@gpleeser5832 3 года назад

Great video!!! Quick question...if I primed after I cleaned and etched but didn't grind the concrete will it still peel?

@alfonsosoumynona6583 Год назад

Its good to know what kind of prep it takes to do the job right, im mainly going to use my garage for storage and maintenance work on the cars, I think i will be fine with the cheaper stuff, also since i dont plan on living here forever

@brianreip411 3 года назад

thank you, would you want to have all the walls and benches built before you put this down or can I build over the epoxy?

@AlexanderSchrepfer 3 года назад

Is that just a normal 7" grinder? What sort of head do you recommend for that? I saw you mention the DiamaBrush for the larger tool; is it the same sort of head for the handheld?

@itsmiked7778 3 года назад

Honestly Homedepot has a Great Epoxy and Colors ..and yes we grind the concrete floor prior havent had any complaints

@LUMLEY92 3 года назад

Are you using the Rust-Oleum Epoxy Shield?

@stevenbaldhead1222 4 года назад

awesome man ,thank you

@danielc9026 3 года назад

Hi, great vid. Could you please tell me what is the best type of roll to apply the epoxy paint with? Thank you very much in advance. Dan

@mikebolinger5359 4 года назад

Nice looking floor Mike. What do you typical charge for something like this?

@billg1871 3 года назад

I have a new concrete shop floor, but I will weld in there, so my question is- will the sparks burn the epoxy? What do you recommend for an application like mine where I want to seal the floor for stains like oil and grease, make it easy to sweep, but not burn the finish? Thank you.

@miketoronto6096 4 года назад

Nice ,I needed to see that thx Mike,, its Mike up in Toronto!! Brother thank you for this vid wow amazing

@MikeDayConcrete 4 года назад

You're welcome, glad you liked it.

@miketoronto6096 4 года назад

Hes got the best advise,,mike day is amazing

@miketoronto6096 4 года назад

Thx Mike, your bang with that vid ,,its farly new that stuff up here , can't wait to try🖒

@athomeandtravel995 2 года назад

Great video. Whats the process for a brand new concrete garage floor in a new house build. Just start with the primer or can the primer step be skipped?

@clemkonan 4 года назад

Are you saving to grid twice first 25 grit then a smooth grind?

@tomaxxxx536 Год назад

really good vid thanks

@tumbaisaiah9374 3 года назад

Great work

@Jeziorski7 3 года назад

what do you think about the H & C kit? does that have everything you need or should you buy something else?

@tomdonnelly611 Год назад

Hi Great video and thanks! I have a brand new house with a clean white garage floor that has never had a car on it yet. Do I still need to go the the Diamabrush step or should I just use a cleaner and then the primer coat?

@TheChildTrain 2 года назад

I did my garage floor about 6 months ago, and I used Sakrete Flo-Coat to try to level the garage, due to pitting. I did grind off the existing paint. What should I use or do to repair the pitting and spalling before applying the epoxy?

@debmiller3378 2 года назад

Hi Mike..I just found you here...I had my garage epoxy chipped and it turned out great...(He was a professional ) Patio turned out great stamped...Now he stained and sealed my driveway and I am little bummed with that...Have a feeling it was little hot to seal...But anyway..I haven't used a power washer and been couple months..Should I just use dawn with power washer?He used 3 coats of sealer.

@Nadjasboy 4 года назад

That looks great!

@v3fitclub546 4 года назад

Hey Mike...I’m not seeing where the course you offer is located...Can you please guide me? Thank you

@stevenreed2100 2 года назад

Would it still need to be sanded if it was a brand new garage floor? Thanks for the help,and video

@ElsaAndAnnie 3 года назад

Superb! Thanks for sharing. We are you guys located? I need to fix my garage.

@sivucit 3 года назад

Mike, what kind of product you recommend fixing garage horizontal crack. and big question is willl it last. pls advise the link of the product to buy the crack before i applly epoxy

@kevinneufeld9711 6 месяцев назад

SIKA EPOXY IS ONE OF THE STRONGEST GRADE EPOXY. if your spending the money to get epoxy flooring done, get the right stuff. No shade to the creator of the video, if the epoxy is done properly with correct mixtures the finished product will last decades if not forever without gaining cracks or breaking chunks free. I have used Sika since I first began epoxy, and my dad did his floor and it remains unscathed for 20 years and counting

@kevinneufeld9711 6 месяцев назад

I hope this comment was helpful! The application was correct just the grade of epoxy was low or maybe the mixtures and times for them were incorrect

@adamfederer3937 4 года назад

I do epoxy floors too for a living in central Ontario good video. I do a lot of concrete repair and outdoor one part epoxy with anti-slip grit. Keep up the great work!!!

@canadabboy 3 года назад

For concrete with some mild surface damage how do you repair?

@kylekonoski4108 4 года назад

Is that a paint primer that you apply before the epoxy? Or is it some sort of epoxy primer?

@hoah1158 2 года назад

Thanks, Chief

@kaseycentanni753 4 года назад

What kind of primer should we be buying ? Is it latex ? A regular wall primer ?

@jskillz5471 3 месяца назад

Thank you sir 👍🏽💯

@eclecticlife 3 года назад

I am planning on doing this on my laundry room that it's on the basement. I am thinking on applying this on the stairs that lead to the basement as well. Any thoughts?

@philh1826 2 года назад

I'm definitely going to buy your course on this, but can you tell me the estimated cost of materials needed? I have a 440 SF garage

@MegaMorgantown1 2 года назад

Thank you!

@rickcassell9613 4 года назад

Nice looking job , my garage floor needs a repair 👍

@MikeDayConcrete 4 года назад

The floor needs a repair or the epoxy that's on the floor?

@TheWopper78 3 года назад

Mike you’re damn good. I’ve seen your website on concrete installation as well. Nice work. Hats off to you.

@ddk4664 3 года назад

This is awesome

@leonelgarcia4908 2 года назад

With this primer that you use is there no need for etching? Or should you Etch the floor first and then prime it?

@MichaelCGatesMusic 3 года назад

Thanks! You save me from ruining my garage floor.

@thedanwriter1 3 года назад

What are my options if my garage floor is susceptible to moisture during winter ?

@passionkairos 4 года назад

Can you use this epoxy on an outdoor balcony or does it have to be a covered area?

@since4everrr 2 года назад

hi mike, i recently completely bullshitted my way into a construction job and i've been watching your videos to learn everything because i literally had no prior experience. well i've been promoted twice now 😂 so thanks for helping me fake it 'till i make it

@usr1996 Год назад

😂😂

@lianealbert7728 Год назад

🤦🏻‍♀️🤦🏻‍♀️ I hope your employer doesn’t find you on social media. My company fires people who willfully lie on their resumes. You can injure or hurt yourself and you could screw up jobs depending on what it is.

@usr1996 Год назад

@@lianealbert7728 ok karen

@since4everrr Год назад

@@lianealbert7728 i’m applying auxiliary breaks to houses liane, relax. At the time of my comment i was promoted twice and since then I’ve received a raise for my performance. Also I received 2 weeks field training as is standard for general labour employment in my Province. 3/10 overall sloppy comment, i expect better from you next time

@aberlinerinflorida7815 7 месяцев назад

Will give it a try 😅

@meshisha77 Год назад

If its a brand new garage... new construction do you need that diamond grind step or can you go straight to cleaning then priming?

@barryallen2535 3 года назад

What is a fair price to prep, seal and epoxy an average 500sqft garage?

@lebrink9810 3 года назад

I couldn't fund the link to what kind of Epoxy you used? Thanks

@brianaalienana5110 11 месяцев назад

Can you mention the brands you are using in this video? Thanks in advance. The video was very knowledgeable

@patrickreed3213 5 месяцев назад

Geez guys you make it look so easy! I'm going to attempt it in my wife's garage (attached with in floor heat) before I do mine!! I'll do it this early summer, got to remove all her "stuff" in they'a beforehand. We built the house w/attached 2 car garage in 2015. Floor is in good shape with no cracks.. so after watching you guys here I think I can manage it. I'm up in Orrington not wicked far from ya! What do you recommend for the base coat and topcoat brands? I don't want to waste my money on Home Dump cheap products. I'd like to do a full flake broadcast and then the topcoat to seal her up. Look forward to your response and again thanks for the wicked awesome videos! Oh, I am at work in the Arctic circle watching your RU-vid channel! Cheers!.. fellow Maniac!

@JC-jc2lo 3 года назад

What’s the difference between a driveway coating and a coating for a garage floor? Sherwin Williams is recommending a water based enamel stain by H&C called heavy shield. What do you think?

@rhcharmed1 4 года назад

Question: I have an overflow drain in my garage. Would I still be able to do this or is the occasional moisture from the overflow drain going to ruin the edges of treatment to the floor?

@barginfinder4u Год назад

Would you recommend washing the floor before grinding or after? Thanks

@timothyramsey4617 3 года назад

What's the best kit to get, I have a 730sqf garage. I would like to get everything I need. I'm on vacation til Thursday of next week and I think I can get this done

@Thaboss_392 4 года назад

Awesome video, whr do I get the good stuff like u are using?

@ILC-eo6vk 3 года назад

My garage floor has that smooth finish that the builder applied 18 years ago. Will that diamabrush remove it? I want to put an epoxy paint on my floor.

@CybekCusal 4 года назад

How do you recommend handling the control joints?

@Pizdzirynka1 2 года назад

What if the water based epoxy in part A and B is self priming? Is primer then still required?

@ronalves9118 2 года назад

Hey mike what areas do you cover if I want to sub out the floor for my shop? Thank you Ron

@lorivandenbussche3731 3 года назад

Curious, what do you guys wear on your feet? Great video btw!!

@brendabeltran6038 7 месяцев назад

Is it possible to use a drywall sander to remove epoxy and prep garage floor for new epoxy?

@tommyconner2399 Год назад

Can you round the corner between the block wall and the concrete floor, then paint the epoxy up on the 1st row or two of a concrete block wall? Also, where are you guys located? I'm in east Tennessee. I wish I had you guys to do my floors (and walls) at my workshop!! What filler material would you use to make a radius transition between the floor and the walls?

@natee2169 2 года назад

What do you think about Epoxy Seal Krete from Rust Oleum?

@psidvicious 4 года назад

That’s a suweet lookin floor! Never worked with epoxy floor coverings but I’m gonna go ‘out on a limb’ here and bet that the secret to a nice looking epoxy floor that lasts is probably gonna be the prep work? Almost true with anything really. Prep, prep then prep again. 🤜🤛

@MikeDayConcrete 4 года назад

Yes, the prep work is really important. That's why most homeowner diy epoxy floors fail. They're told to just acid etch then apply the big box epoxy. As soon as they drive on it with hot tires the epoxy peels right off under the tire. I grind all my floors before we do our epoxy floors. Never had one fail yet.

@Cartec09 3 года назад

Mike Day Everything About Concrete 🤥

@user-qh7jt4mq6b 3 года назад

What bigger floor grinders would you use?

@CarlosCastillo-vh2bx 4 года назад

Great video! Glad to see a pro doing it right. I’m a contractor and a customer asked me to do epoxy on a storefront floor... never again will I mess with it. We used that rustoleum stuff and it was absolutely horrible. We diamond grinded, etched, cleaned and followed all directions.They offer a guarantee but I sent the pictures and they wouldn’t respond. Took twice as much product to finish the job over $700 in kits plus machine rentals. Would have been better to hire pros like yourselves

@MikeDayConcrete 4 года назад

I run into that a lot. People trying it themselves without really knowing just how or what needs to be done. That's why I made the course.

@beautyintheeye949 Год назад

What is the color of the epoxy grey with green in your old orchard beach video?? Love it!

@jimflanagan6029 4 года назад

Wish u were in NJ , great job .

@gregperkins6764 3 года назад

Where in jersey are you. I do epoxy floors in the Philadelphia area

@RectifyTheParadigm 4 года назад

Considering doing this. My garage is 1200 SF what is the apprx material cost?

@246justskate Год назад

Awesome 🎉🤸🏾💫🤸🏾🙌🙌🙌

@rhlopez2694 3 года назад

can you just primer over paint ? The place I work at want the floor epoxied, but it is a semi-cleanroom and particles can become an issue.

@MikeDayConcrete 3 года назад

No I wouldn't. We always remove existing paint & coatings before applying a new one.

@miniracerpimp 2 года назад

If you have bare concrete do you still grind it ? Or acid etch?

@ghostrider2012 Год назад

Great Tutorial, my question is do you travel to other states and if so how to contact you for a epoxy job for a patio and garage ? Thank you

@Djneyon79 2 года назад

When you said primer I said hahahah I would have went to Home Depot and been the big dummy to not think 💭 about that and I’d be calling about my floor is peeling help…😂 I just watched a video before yours and got inspired. And this was a hey hey hey 🛑 hold on watch this first.