How To Fabricate Parking Brake Cables

Подписаться 1,8 млн

Просмотров 130 тыс.

50% 1

This was one of my favorite parts of the #FairmontProject so far, fabricating the parking brake cables. It may not seem glamours, but when you build a car from scratch, everything that you put into it becomes special. Especially if it's a useful think like a parking brake.
When I purchased my 5 lug conversion kit and brake kit, it came with a set of parking brake cables that were suppose to work with the new brakes. Thing is it was set up for a fox body mustang, not a Fairmont. I had to get a little creative if I wanted a parking brake.
Please don't be too hard on me about my welds in this video. I was still learning. I was also having some issues with the welder that I mention in the video. I leave this kind of thing in my videos because I know it's the type of thing you might run into with your projects as well. I may not look as good as a result, but at least you'll have good information on how to handle the same issues if you run into them.
My 5 lug kit: lmr.com/item/S...
Previous video in the series: • How To Upgrade the Fro...
The #FairmontProject playlist: • ETCG Gets a New Car! -...
The best place for answers to your automotive questions: www.ericthecarg...
Camera: Brian Kast
Thanks for watching!
Discussion about this video: www.ericthecar...
Tools & Stuff
Welder: www.jbtoolsales...
Zep Penetrating oil: www.zepautomoti...
Face Shield: www.jbtoolsale...
Side Cutters: www.jbtoolsales...
Knipex Pliers: www.jbtoolsales...
Dewalt Impact: www.jbtoolsales...
Cut off Wheel: www.jbtoolsale...
Rockwell 20v Impact: www.rockwellto...
Astro Pneumatic Torque Sticks: www.astrotools....
Related Videos
New Fairmont Parts!: • New Fairmont Parts! #F...
How To Clean Prep & Paint a Differential: • How To Clean, Prep, an...
Ford 8.8 Differential Assembly (Part 1): • Ford 8.8 Assembly & Se...
Ford 8.8 Differential Assembly (Part 2): • Ford 8.8 Assembly & Se...
Installing the new Differential #FairmontProject: • Installing the New Dif...
Installing Rear Disc Brakes #FairmontProject: • Installing Rear Disc B...
Fairmont Tires: • New Tires and Wheels #...
ETCG's Air System: • ETCG's New 80 Gallon B...
Longevity Welder Review: • Longevity Force Cut 40...
Knipex Review: • KNIPEX Tool Review -Er...
Extra stuff
The Thing (Movie 1982): www.imdb.com/ti...
**Answers to your automotive questions found here: www.ericthecarg...
Social Network Links
Facebook: www.facebook.c...
Twitter: / ericthecarguy
Google+: plus.google.co...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecar...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 484

@Nipplator99999999999 7 лет назад

The evil of the thriller...You always have the best subtle ways to make me have to admit my age. I was admiring the locker you added right when you said that.

@plavins1 7 лет назад

When I need to make a cable end like this I get a small size nut that goes over the cable, and solder the cable to the nut. You can whack it with a hammer to flatten it and it will work just like a crimp end. This technique has never failed me. Just dip the end of the cable in some soldering flux, and put some solder in a small metal container, like a metal bottle cap from vodka or something. and heat it with a torch. dip the cable in the liquid solder in it will be great!

@debtminer4976 4 года назад

Old comment, I realize, but damn this trick is awesome. .thanks

@tilleytristan 7 лет назад

I'm a hardcore Chevy guy, and I gotta say that "I want more Fairmont vids". Great job Eric

@mdj2023 7 лет назад

Damn Eric, that balancing act is going to give me nightmares. I get nervous climbing under my truck, when it's on jackstands.

@GIZZMOTORSPORTS 5 лет назад

I was thinking the same, I would have moved the lift arm forward under the car rather than completely away.

@dtimboggs 7 лет назад

Thanks for the parking brake fabrication. I have a 1987 f150 I put a disk brake kit on, and the parking brake was an issue. Now since I have seen your fix "I CAN DO IT!" My wife will like the fact that the truck will have a parking break.

@wille8266 7 месяцев назад

Same on 96 F150 and my search led me here! About to tackle

@calypsokid7 5 лет назад

It's refreshing to see someone else think out loud, and fabricate something live, with all the snags!!

@rubeng5150 7 лет назад

The sweet satisfaction of making things that don't go together work flawlessly together, Great Job Eric!

@zackc3539 7 лет назад

Eric reminds me a lot of my dad. If something doesn't work or fit quiet right, he uses what he has and makes it work. Fabrication is truly an art. I've always enjoyed mechanics and fixing stuff, but I don't think I'll ever be as skill full or as mechanically inclined or as good at fabrication as Eric or my dad. It's stuff that definitely takes a lot of trial and error. I've always enjoyed watching your videos Eric, there have been many times where I've had to reframe back to one of your videos when I was working on something, they are so informative, and very enjoyable to watch, can't wait to see the Fairmont in action, and many more videos that are hopefully to come.

@ericthecarguy 7 лет назад

Thanks very much for your comment. I really appreciate you sharing that.

@Zezims 7 лет назад

Your best Fairmont videos are the ones when you have to figure something out and make something work.

@GrimRepair 5 лет назад

Thriller. Not around in the 80s, that song is still cool, Eric you're still hip.

@MrXSmasher 7 лет назад

I just know you've seen it before but ill say it again, I absolutely love how you leave your mistakes in the videos. It makes me feel like if I mess up something it is not the end of the world, instead makes me go back and figure out a better way to do things. Thank you for doing that. Also, its a way for me not to make the same mistakes too :) Really appreciate your videos Eric

@ericthecarguy 7 лет назад

It's so nice when people 'get it'. Thanks for being a thoughtful intelligent person. They seem to be on vacation based on some of these comments.

@WhistlesToAnimals Год назад

This is such a great video. On my car, it is very difficult to replace or even to adjust the emergency brake cable. I know with bicycles, you adjust the slack from the caliper end. And on older cars, you may have to deal with rusty parts that may end up breaking or be very difficult to remove. I may just end up crimping an end on there, because it is purposely made very difficult so that the dealers can profit off of you. The crimping method may be the way to go for me. Just lock on some needle nose pliers on there to ensure where you want the crimp to be, then when you know where you want it, crimp it there. Thanks!!!

@theycallsmeella 7 лет назад

was watching this and my wife suggested it be used for a drinking game. You do a shot every time Eric says cable lol

@hammondautollc7809 7 лет назад

To All the naysayers As I have said before this is Eric's Project he'll do it the way he sees fit and besides it's already done so deal with it. I like seeing how Eric overcomes problems it helps me think more creative. So kudos to you Eric the car guy. P.S. I'm waiting to hear more about your plans on Fixing it forward

@ericthecarguy 7 лет назад

Thanks for that. I was getting tired of people telling me I'm going to die because I welded my parking brake cables. As for FiF, I post monthly updates here. www.ericthecarguy.com/blog

@ArchimedeanEye 7 лет назад

The easy way to do this is to run those new cables just as they are - but crossed over under the car. So the left runs across the width of the car into the right cable receiver and the right runs into the left. That way you can use the long cables with no mods

@fridgebeer6897 7 лет назад

ArchimedeanEye great idea, just be sure that the cables don't contact the driveshaft or any other moving parts to avoid having them violently ripped out causing damage.

@ArchimedeanEye 7 лет назад

Volvo 240 sedans from the 70's till the 90's had them crossed over. You just need to fabricate some little stand off brackets and hold down clamps (don't use zip ties!)

@jacobzimmerly Год назад

With that logic, you might as well spool up all the slack and zip-tie it to the frame. Nobody wants miles of unnecessary cable under their vehicle.

@stihltech206 7 лет назад

Also, I think you did the right thing leaving the cables in stock configuration. That little swing arm gives added leverage to the user and makes pressing the pedal easier.

@wyattoneable 7 лет назад

Perfect timing as I have this job ahead on my own project. Thanks for some ideas.

@ericthecarguy 7 лет назад

You're welcome. Thanks for the comment.

@SmittySmithsonite 7 лет назад

I had that same problem with my Miller welder, except that it was the plastic sleeve, or liner, inside that cable that wore through - and it wore through from doing exactly what you were doing there, leaving it coiled up. Now it won't feed smooth even stretched out straight. I haven't priced it out yet, but I'm sure it'll be another bill to add to the pile ... You get yourself some rest there Eric! You've been burning the candle at both ends for a while now. We appreciate it, but you need to take care of yourself there buddy! HAPPY NEW YEAR!

@iTsStEpHyyyy 7 лет назад

Are you kidding man?!? Damn, this is why I love "gearheads", this video/it's comment section. You guys are so knowledgable about cars its fuickkng hot. Keep it up!!

@ericthecarguy 7 лет назад

Yea, they're a barrel of laughs. Thanks for the comment.

@IronMannara 7 лет назад

Ive been arrogant to cars all of my life . Found this channel and have been learning so much everyday and have been just fascinated . Awesome work Eric . thanks for the channel and cant wait to see the fairmont drive day !

@supercoupe6288 7 лет назад

FYI I've tried zip ties on E-Brake cables before and they always break, might want to use metal conduit holder that fits, just drill 1 small hole and use a self tapper.screw.

@ericthecarguy 7 лет назад

If it becomes a problem I'll look into it. Thanks for the recommendation.

@CubasAutomotive 7 лет назад

super coupe depending where you are installing zip ties, yes, I agree. I use worm hose clamps myself.

@ketankadam5669 7 лет назад

agreed, the zip tie Will break

@DanWalterTradeview 7 лет назад

worm clamps would be my choice

@jm-ve8ry 2 года назад

Your videos are very helpful for a "driveway mechanic" like me. I am going through the exact situation, disc brake conversion parking brake cable modification. Thx. I also own a sailboat so I have heavy a duty crimp/Swage tool and steel slugs to crimp to the end of the cable.

@ncc74656m 7 лет назад

That thunderstorm sounds so gorgeous. I'm originally from Omaha, so I miss getting the really good thunderstorms we don't get as often here in the NY area.

@JamesDoylesGarage 7 лет назад

Me and my Son, think you're the BEST. You have dozens and dozens of posts over the years. I just want to say how much we appreciate all that you share. We love the Honda Engine work the most. I wish you and your Family , all the best for the New Year.

@screamineagle88 7 лет назад

Just a small suggestion. If your going to use zip ties to permanently keep those cables off the tires, I'd put 1 or 2 more on there just in case. Something as small as a rock can hit that area and break your single tie. Then you wouldn't know it was rubbing until it was too late. With a couple extra ties in there it will give you cheap insurance.

@ArchimedeanEye 7 лет назад

Or do it properly and make some simple stand-off brackets out of some flat strap that bolt to the rails or body and loop around the outer cable. Eric has a blow torch, so he could bend some up real easy.

@ArchimedeanEye 7 лет назад

Brad Pike No, a blow torch would also be fine for mild steel.

@ArchimedeanEye 7 лет назад

Brad Pike Nice try idiot!

@screamineagle88 7 лет назад

That got out of hand quick, didn't it?

@ArchimedeanEye 7 лет назад

Brad Pike Incorrect. I have both a natural gas torch and an oxy set. For heating 2 or 3mm strap natural gas is perfectly fine and easily quick enough. You have no fucking clue what you are talking about and add zero value to the conversation. So fuck off.

@noahbody5870 7 лет назад

I just had to fabricate an E-brake cable for my 56 Fairlane and I brazed my lugs on the cable ends. It came out nice and clean and strong. Just a tip if you gotta do it again.

@nathancoigny7386 7 лет назад

Your videos are what I look forward to every time I get on RU-vid! Keep it up Eric. One of these days I'll have to fly out to one of your meets!

@almfreak 7 лет назад

Love your videos as always! Can't wait to see the Fairmont back in action! I'm not going to join the "Eric, you're doing it wrong!" mob, but if your welded cable ends ever give you any trouble in the future, I can definitely vouch for the effectiveness of a few wire rope ferrules installed with an inexpensive pair of crimpers from the hardware store. I've used them with great success while rigging commercial sound and lighting equipment.

@malcolmyoung7866 7 лет назад

Eric, somehow missed this one...just found it and for a future project this is what I need.. You ARE the MAN!!

@ellesmerewildwood4858 7 лет назад

Due to my highly developed Jedi-like powers of observation I just noticed the Fairmont is a 2 door. Yep, I'm sharp, I'm right on the game.

@truckhogs 3 года назад

yes, the balancing act made me nervous too ! Fab video !

@darinmbicknell 7 лет назад

I'm addicted to the Fairmont videos. Argh! Where can I get a sponsor? This episode was a "thriller". It was "Priced" right. Pun time is over get back to work and stay dirty.

@didtoknan8128 7 лет назад

Eric on each "arms" of your lift, you should weld a small metallic box to collect the lug nuts. And voila. No more flying lug nuts !

@randomusernumber1 7 лет назад

or keep a magnetic tray since welding to the arms will void the warranty ( it is a brand new lift)

@didtoknan8128 7 лет назад

The idea of welding small boxes is better than a magnetic tray because it will always be there, and never needed to be moved.

@spelunkerd 7 лет назад

MIG welding cables have a replaceable liner inside that can be kinked and damaged, resulting in poor wire feeding. Replacement of the liner is pretty easy, so if you have ongoing issues, get a new liner and make a video of the replacement! Happy 2017, Eric, it's great to see you again!

@sebhac0123 7 лет назад

Heres a Tip a guy from Grote Lights gave to my college class. He was talking about zip ties. Whites are for interior work because they're plastic and black ones are for exterior work because they have a coating on it. It will resist better against weather and such

@nbruc3392 7 лет назад

This was incredibly satisfying to watch. Parking brake just kicked in yo

@ericthecarguy 7 лет назад

Thanks!

@NebukedNezzer 7 лет назад

the cable is tempered steel. the welding will take the temper out. crimping will not damage the cable. to prevent pulling the end off, crimp it.

@ronaldschild157 7 лет назад

Eric is a very skilled, innovative and omni competent automotive technician. I really like his presentation style. I can't say enough positive things about his style alone. One criticism though: I heard you use the words "taunt" and "tauntness" when explaining the proper amount of cable tension. It should be "taut"; lines and cables can experience more or less tautness. "Taunt" is what Eric does when he shows us all his cool tools in the shop ;-) P.S. - Yeah, I know I am a spelling-and-grammar-nazi.

@AttilaTheHun333333 7 лет назад

I like the format of this video...feels kinda like we figured it out together. You even heard me a few times screaming at my monitor. Anyways...Wish You a Happy New Year Eric!

@ericthecarguy 7 лет назад

Thanks! That's just what I was going for.

@steventhomson7531 7 лет назад

I've always wondered if I can make my own cables and weld ends on. Now I know I can. Cheers Eric! Legend!

@ericthecarguy 7 лет назад

Indeed you can. Good luck.

@snewkirk75 7 лет назад

Amazing video as usual, thanks eric and camera man brian for being awesome!

@jm-ve8ry 2 года назад

I'm a cameraman, this guy does a great job.

@autoasylum9523 7 лет назад

Great video love the detail, quality, and effort you put into these video. it make it really enjoyable to watch. Hyped to see the fairmont finished!! Can't wait to see what you got in stock for 2017.

@D6Spanky 7 лет назад

"if you know what that's from, you were alive in the 80's" LMAO Yes! It was such a big deal when it premiered on MTV. It was awesome.

@D6Spanky 7 лет назад

what? no. LOL

@WreckDiver99 7 лет назад

"They"? This is from Michael Jackson's "Thriller"....Maybe you are thinking Iron Maiden's "The Number of The Beast"..."Whoa to you oh earth and sea...."

@Flea02Cruiser 3 года назад

Eric, in short, you are awesome and do great work. Thanks for sharing.

@danielescobar7618 Год назад

I have this doing on with my Datsun truck. Thanks for all the ideas

@gsmeyersaz 7 лет назад

Do NOT use nylon wire ties to secure the cable. When you actuate the P Brake the cable will want to go straight thus breaking the wire tie also they break over time (due to road salt, ozone, UV, etc.) . Use two stainless steel “P” clamps back to back; they will not break and they will last forever. I also would use a good rust preventive. About welding...you are trying to weld two dissimilar metals....I would just crimp the ends on...you have a vice. Why didn’t you keep both ends of the cable in tact and just remove a middle section; in some areas of the cable you don't need the outer sheeting? You could clamp the two sections together with two “U” clamps...then if you did miss measure you could just go back and readjust at the “U” clamp. Otherwise good video as always!!!

@restlessjack0042 7 лет назад

Nice job! No mistakes made 😊....just put 1-2 more zipties on both sides. Dont rely on only one, they are cheap anyway. Coz if that one fails its bye bye brakes!

@n20cpri 7 лет назад

Awesome how you were able to re-use the old with the new!

@usmale47374 7 лет назад

I love doing things like this. Good job!

@30kendel 7 лет назад

"Can't even see my ugly welds! Ah hah!!" Hahahaha eric cracks me up!

@jamesbraun1264 7 лет назад

Hey Eric, I see your Element in the back ground which leads me to this. I changed out my rear stabilizer bushing and the squeak went away. Good build on the brake cables.

@juliocesarnobre3344 7 лет назад

Hi Eric, I'm from Brazil very nice your project. Congratulations.

@MechanicalMikesRoadsideRepair 7 лет назад

Eric you should weld up some type of bolt on pulley that bolts onto the welding cart and rolls your hose up so there aren't any kinks

@mdj2023 7 лет назад

If you change the wire lining in the welder cable, it may solve your problem with the wire feed. Bleepin Jeep just did a video on that.

@PHARRAWAY 7 лет назад

Eric quick question where did you get the wheels for the Fairmont? Thanks

@ericthecarguy 7 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-buD3hrUfxJk.html

@PHARRAWAY 7 лет назад

nice thank you

@strongmaster 7 лет назад

I would have cut a big hole in the floor and just did the Fred Flintstone method in stopping. Just a tip, wear shoes, our feet aren't built like our ancestors. but in all reality, great video. keep up the good work.

@parsedout2576 7 лет назад

Gotta respect the hackery without apology.

@LasseHuhtala 7 лет назад

Making stuff is so damn gratifying.

@ericthecarguy 7 лет назад

Right?

@LasseHuhtala 7 лет назад

I mean, I can be a curse sometimes too, when you are supposed to concentrate on something, and you get that makers itch.

@Kheir112 7 лет назад

Eric. High temperature metal repair solder works well for this kind of work. I have used it to assemble cables where I did not want a crimped connection (can create stress) and it has worked well, and looks rather neat too. The stuff is almost as strong as a braze, but at a lower temperature. You should try some. I found mine in the plumbers section at my local Home Labyrinth...

@ericthecarguy 7 лет назад

Thanks for the recommendation.

@potardo9851 4 года назад

Had to swap the rear axle out on my Chevy Van with a later model that had different drum parking brake cables from the original. Saw this and now I'm thinking about doing the same thing you did but running the cables to a handbrake assembly to the right of the drivers seat similar to the way Ford Transit Connects were done. Never really liked the foot parking brake assemblies, too many issues.

@alj628 7 лет назад

I would have thought that you would have crossed the break line from one side to the other like a X. I don't know if you thought about that.

@ericthecarguy 7 лет назад

Remember that the drive shaft and suspension will be there. I'm very happy with what I did. Thanks for your input.

@rradioactiv 7 лет назад

Alexander Heyward they looked long enough to travel along the rear axle in an x pattern and go to their locations

@asandberg6 7 лет назад

+Alexander Heyward I had the same thought.

@Kickinpony66 7 лет назад

A Universal Swage Tool is a true Time-Saver.

@michaeljavor7947 7 лет назад

Eric, Im pretty sure you just need 9/16 E clips for the caliper cable ends. I had to replace mine when I built my mustang.

@acoow 7 лет назад

We said we wanted more Fairmont videos? I didn't say that. Maybe I should fix that. I want to see more Fairmont videos. Happy now, Eric?

@johnworthington9995 7 лет назад

Hey Eric, I love your work. I've made a big shout-out to the world-wide veteran community on a FB site called Drinkin Bro's Garage. Good on ya mate!

@ericthecarguy 7 лет назад

Thank you!

@stevencastro8466 7 лет назад

EricTheCarGuy please help, i purchased an idle regulator for my 1995 mitsubishi galant ES, but i dont know where does the input and output hose go. i thought it was a simple replacement but a previous owner removed the idle regulator. ive been looking for a couple of days and i cant find a picture of how it goes. and the book doesnt show it either.

@stevencastro8466 7 лет назад

www.google.com.pr/search?q=95+galant+igle+regulator&client=ms-android-sprint-us&prmd=isvn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwip3pn7iKjRAhXC6iYKHRL4BMsQ_AUIBygB&biw=412&bih=652#imgrc=VIP_hz932lNPIM%3A this is the exact piece i bought

@aboshehab930 7 лет назад

Dude.. I love 💚youre work 👍👍👍👍👍

@Merlindotswe 7 лет назад

A tip for you Eric. Use black zip ties which are more resistant to UV light and won't get brittle as fast as the white ones.

@ericthecarguy 7 лет назад

Yea, since there's a ton of UV light that reaches the underside of the car. ;) Thanks for the input.

@Merlindotswe 7 лет назад

OK, so i guess there will not be any "How to mount UV LED stripes" episode in the Fairmont Project series! ;) Great videos! Learned a lot.

@Nightstalker350119 7 лет назад

lmao XD

@almfreak 7 лет назад

Black zip ties make your car faster than any other color... similar to the "stickers add horsepower" principle...

@ericthecarguy 7 лет назад

Robert Blom Ha ha. I'll take that under advisement. Thanks!

@zx8401ztv 7 лет назад

Vincent Price Laughing at the Evil of the Welder, while the lightening booms :-D. Fresh cables are great, but later i have to revisit them to re-adjust, allways stretch a tiny bit. On some old cables ive seen, they had a funnel shaped metal end, the core wires were bent/spaced out to fill the inside of the funnel, moulten lead was poured in to fill the gaps between the wires. That was a long time ago though.

@tilokirchner5476 7 лет назад

22:00 min. really nice. Great thunderstorm. Greetings from Germany.

@mikehartmann5187 7 лет назад

Happy New Year Eric. Thanks for the hard work you've put into these videos for us. All the best in 2017.

@ericthecarguy 7 лет назад

Thanks! Happy New Year to you too.

@marksinger4949 7 лет назад

I can't wait for the motor and transmission to be put in.

@SteveM000100 7 лет назад

OMG Eric, get some black cable ties lol Wheels look cool tho.

@Nightstalker350119 7 лет назад

Eric, you read my mind! I need to do this because mine just recently broke.

@ericthecarguy 7 лет назад

Good luck.

@bigd2203snuffy 7 лет назад

You could use an "E" clip on the caliper to hold the cable in.

@Enrique2k52 7 лет назад

Excellent video (like always) .

@Michiganborn1969 7 лет назад

Good job! I personally would have used black zip ties to make them less noticeable. For what's worth, my wife wishes I could run out of gas. 😄😄😄

@anomamos9095 7 лет назад

Alternative methods to remove the caps that were crimped on just hit them with a hammer over an anvil to open the crimp and slide them off. to crimp them back on find a nut that is close to slipping over it and cut it in two then place the two halves on either side in a vice and clamp it down to crimp it. the bead at the end of the cable. Do Not weld it! it will fatigue and snap. Find a nut or other suitable bead alternative that has a hole too small to slip the cable through. heat it red hot and pass the cable through it then quench the bead. or use the above crimp method or find a nut that is too small cut it on one side and pry it open slip it over the cable and squeeze it shut in a vice weld the cut only.

@DriveShaftDrew 7 лет назад

good job took a bit but you got er done

@retroguitarmaster 7 лет назад

oh dude welder problems are the worst, one time i had mine all set up and it would do the same it did here, i just thought it was a dirty surface or something and 2 hours later found the ground nut inside looked tight but it was finger tight

@Harrythepot 7 лет назад

I cannot wait too see this beast on the road. great job Eric! #fabking

@Braydonbevis 7 лет назад

When you did the thriller reference 😂😂 I was born in the late 90's and knew that

@ericthecarguy 7 лет назад

Yea, you don't have to be alive in the 80's to know who Michael Jackson was. ;)

@amateurtouring 7 лет назад

I had a welder that had trouble feeding wire unless the cable was stretched out.. Turned out the liner inside the cable was too long and when the tip was screwed in it would bind the wire. I unscrewed the tip, rolled it up like it is on your cart, trimmed whatever liner was poking out and haven't had a problem since..

@mrhowardishere 7 лет назад

Yes I want more fairmont videos!!!

@JS.990 6 лет назад

Eric, thank you for your awesome videos! They are helping me alot woth my project for my Foxbody. I currently have a SN95 being switched into my Foxbody. Everything from Interior to Differential and so on. Btw, if I was your camera guy, I would be saying "That's what she said" 99.9% of the time in this video ahahaha

@josephtucci3666 7 лет назад

Best vid yet! PS dog dish hub caps! Good luck

@classicman1828 7 лет назад

Oh man ! I saw you improvise a lot In the brake And In the steering system ! you improvise in the most critical things That will save your life I hope you test the brake and steering systems Before you push you'r killer engine to the limit .

@ArchimedeanEye 7 лет назад

He's intent on building a death trap it seems. Hacked together brake pipes, steering shaft pigeon shit welded from old pipe, MIG welded brake cables. This is horrible stuff. It seems only an accident will wake this guy up.

@ericthecarguy 7 лет назад

STARSDUST Thanks for your concern. I'm actually redoing the entire front suspension along with converting to power steering in future installments. I have updated parts for that which eliminate my welded steering shaft. That was more of an exorcize in fabrication. You're correct that it is a safety issue though which I'll cover in that video when I convert to power steering. As for the parking brake. It's a parking brake, not really a critical system for the operation of the vehicle. Once again, an exorcize in fabrication. Even so, I stand by what I did as it seems to be holding up just fine. Thanks again for your input.

@HUBBABUBBADOOPYDOOP 6 лет назад

Treat your MIG just like any other cable- periodically recoil the wire, spray WD-40 in the "hose/sheath" run the wire back through. Lightly spray the coil, too.

@Nightstalker350119 7 лет назад

Eric, do some welding videos! I have a Chicago electric welder and want to have some tips. My welds kind've look like the cables some times and want to get better. Like Gas vs Flux core. I love fabricating.

@vetterfellow 7 лет назад

Eric, stainless steel hose clamps with a protectant under lament would be better then zip ties. I like zip ties for everything myself. Just my two cents. Peace !!.

@geoffblight6594 7 лет назад

all the best for new year

@ericthecarguy 7 лет назад

Same to you!

@davisjames8484 7 лет назад

EricTheCarGuy hey I love your videos and I was going to go into the automotive trade. I wonder what tools would you advise new hires to have on their first day? thanks for your time!

@Dcs-Brasil 7 лет назад

Fair enough! Very good video as always! I like it!

@mikedrz 7 лет назад

Good job, I think the word is taught, instead of taunt

@christianguzman8228 7 лет назад

15:00 Wood bit on metal. High strength steel usually requires stronger cutting tools. In your case, I would've used a drill press and a carbide bits. Although honestly, I would've just made another end using another barrel. I like that 454 SS I see back there. I'm restoring another 350 myself. Usually in intervals of whenever I have free time.

@HighMansx 7 лет назад

I thought I heard frogs -- nice intro! Hahaha

@CVTaxi 7 лет назад

The CVPI steelies look good on that car. I hope you end up keeping them on there.

@HUBBABUBBADOOPYDOOP 6 лет назад

Quenching in water will make metal brittle. Used motor oil will actually strengthen it. It's called temper.

@carslover3509 7 лет назад

very nice work miss u man

@NebukedNezzer 7 лет назад

notice the spring on the welder feed tension adjustment is not compressed much at all. I have a miller 120 and run more spring tension on the wire feed roller adjustment. Have no problems with feed.

@jroblop4140 7 лет назад

Merry New Year Eric, great informational videos. I was wondering if you had any ideas on converting a foot brake into a hand brake? I have a vision, however, would like your insight please!

@NebukedNezzer 7 лет назад

I would use something more permanent than zip tie to hold cable to control arm because if it comes loose and gets into the tire while driving that would be bad.