How to Fill up your Bullfrog Spa 

This video will explain how to fill up your Bullfrog Spa. Check out our channel for more how-to videos on your Bullfrog Spa.
WARNING: An empty spa (spa without water in it) must
not be left exposed to sunlight as shell damage may occur. Once
the spa is unwrapped, fill spa with water immediately or shade the
spa with cover to prevent direct exposure to sunlight.
IMPORTANT: Do not turn power on to the spa without
water in the spa. Serious damage to the pump and heater may
occur.
WARNING: Make sure power is off to your spa prior to
following spa filling procedure. Failure to do so may result in
serious injury.
Step 1: Remove filter cover by lifting until snap fittings release.
Step 2: Remove a filter cage cap
Step 3: Place garden hose inside the inner chamber of the filter
cage.
Step 4: Fill to the water level indicator line located on the right side of the grill on the face of the filter plate assembly.
Step 5: Reinstall the filter cap(s) and filter snap cap.
Step 6. Once filled to water leven indicator, turn spa on