New to the G9, grabbed the package with the 12-60 and other goodies from Adorama. Thanks for making this video, a lot easier and simpler than reading through the instructions!
Excellent. Just ordered a G9 so when it arrives I will apply the update and purchase the V-LOG upgrade. Been waiting for a year for the G9 to come down in price. Panasonic makes great cameras, but always too expensive for me until they drop the prices. Will look for your instructions on how to use the V-LOG.
@@HviteVinger An undocumented change in the G9 firmware was a bump in 1080p bitrate from 28mbps to 100mbps. There are now also FHD 4:2:2 10bit codecs (also not mentioned). Still not up to the capabilities of the GH5 but a much more well rounded camera all the same.
Hey Joseph. Do you have or can you do a instructional video on how to update the G9 so it can use the Olympus 2xTeleconverter? Is it the same process as this update? If so does it matter which update I do first? Thank you.
Hi Thanks for the videos they are inspiring .. i am having problems with noise when shooting sun rise and sunset - only in these timings with my G9 , and advise you can give me on setting or are you going to make separate video on settings during sun rise and sunset subject
Love the new look shelving for your camera gear. Firmware updates installed for my GH5/GH5s. I'm holding out for the news of the Panasonic GH6 to be announced next year 2020!
Hello, I have the H5 II and have done the process as you described. But when I put the memory card back into the camera and press play, it just says: no pictures available. What am I doing wrong?
Hello, and thank you for all the useful information you provide. As a Lumix expert (you, not me...), I was wondering if you could tell me if the new added functions near & far autofocus are working also when filming video, or just in the photo-modes... Thank's again!
Is the G9 compatible with Elgato Camlink 4k for streaming? It has clean hdmi output but in the official Elgato compatible cameras it only lists the GH5 and not the G9, which seems weird. Could the 30 minute record limit be the reason?
That is odd. I haven’t use the ElGato but it’s hard to imagine any reason that it wouldn’t work. The 30 minute limit only applies to internal recording; any of these cameras can be connected to HDMI and left on indefinitely. I vote it’d work fine. As always… but from somewhere you can easily return it!
I appreciate this video. I downloaded the firmware for the DC G9 but it keeps saying its unable to expand on my Mac Book Pro computer. It says its unsupported. How do I open the file in this case? Thanks
Sounds like you’re trying to expand the .bin file. What you’re downloading is a .zip that contains a .bin. If you see a .bin then it’s already expanded.
In photo mode yes it’ll work but like any profile it only applies to jpeg. But if you were shooting stills on a set and wanted them to match the V-Log footage, that’d work. Some apps will even let you apply a LUT to a photo.
As always, Thanks for these videos! QUESTION: The GH5s & G9 both received Animal Detect, but the GH5 apparently did not. Why is this? And will the GH5 get this as well? Thanks.
Love your videos. Do you have a revised file update for your custom settings on GH5 to download ? I’m still using your old one from your from your course. Thanks. 🙂
I don't, and here's why… I change my settings ALL THE TIME. I found that I'm constantly adjusting my C memory settings, how I configure the camera, etc. for nearly every shoot. Having one "base line" just doesn't work for me anymore, sorry! So I think what I provided way-back-when is a good starting point.
Hey there, sorry for the delay. I got this same question twice in a couple of days and wanted to be sure I had a good answer. It is designed for scenes where you have a bright spot, such as a play on a theater stage. The metering mode looks at the brightest parts of the scene, and builds the exposure for that. If you used center weighted it'd calculate the shadows in too much, and multi-zone metering would likely as well. This basically tells the camera that the brightest part of the scene is what it should expose for.
Hello, Joseph. At first, I'd like to thank you for your great videos and reviews. At second, I consider you as an expert, so I have one question. I have Lumix G85, American model, obviously. I live in Serbia, and I shoot in 50Hz region. In my camera, there are only 24. 30 and 60fps settings, and as I know, no shutter angle setting, which give me serious flickering issue under artificial light. Is there some solution for that? Can I apply Australian or Hong Kong firmware on my camera? Will I get the variety of settings of that region's camera, or will I ruin the camera? Greetings.
Hey there, thanks for the complements! Sadly no, you can’t. If there’s a “jailbreak” option I’m not familiar with it and of course wouldn’t recommend it. That said though to avoid the flicker just shoot at 1/50 (or 1/48) instead of 1/60. That should solve it. I have done a few videos on the topic that may help you learn more; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0kAuDuV9K9U.html&si=H_SBPVHOii8PsgXD and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1qcOAOK8_eY.html&si=RO-SpNXysWkGUnJb
New Sub! Great video! Are you still going to create Tut. on V-LOG? Blessings!
4 года назад
I was waiting for this G9 firmware update so much because of the 10-bit video feature, but it turns out that 10bit is only available in MOV codec, and the free version of Resolve 16 doesn´t support it. Dang! Spending 300€ for the Studio version of Resolve because of one feature is not very tempting...
Hi joseph i am preet from Sydney i am panasonick GH5s user now i buy panasonick s1 camera i try to find shutter priority like we can set in GH5s 180°,,,, can i set in lumix S1 or not Big thanks if you help me with that joseph
Dear Jospeh, Is the Panasonic Image App still usable when the new firmware is installed? Are all new features for the G9 automatically included in the app or will there be an update soon for the app as well?
You know, I haven’t tried yet. I doubt the old app will connect but haven’t tried. The new app, “LUMIX Sync”, has been great for the S1 but I haven’t compared features. Is there a specific feature you need? I could check on Monday
@@photojoseph Thanks for your reply. Just updated my G9 to firmware version 2.0. Camera settings are untouched after installation and Panasonic Image App works fine with all new features included. Great job Panasonic.
Joseph, I just got an S1 with 1.10 firmware--and I can't find the 1.2 firmware update. All I see is the 1.3 on the Panasonic site. Is there any problem with me skipping the intermediary update and just installing 1.3???
PhotoJoseph great. The camera comes tomorrow. I’ll install 1.3 before I load in V-log. Bye the way, I really enjoy your videos- so clear, so helpful. Thanks so much.
You’re going to have to give me a lot more info to help you, but honestly every time this doesn’t work it’s because someone slipped a step. Watch the video again or read the Panasonic page and follow it step by step.
@@photojoseph Thanks...I'm trying to figure out if my lens (Lumix 12-35mm) firmware is current. It shows version 1.0 in my camera. Just upgraded the camera to 2.6 successfully. I'm not seeing this lens firmware on Panasonic's list of available firmware updates, so I guess I'm OK. I just got the camera, so I'm unfamiliar with everything about it. I really appreciate your videos...huge help!
Do you think, that at some point, Panasonic will make anamorphic recording accessible for the S1 as well? It's such a bummer for filmmakers who recently bought the S1, when Panasonic released the S1H shortly after it. Trying to sell the S1 or trade it in for the S1H is not reasonable due to the price politics of Panasonic.
No, I don’t. But I also don’t understand the sentiment. You bought an S1 which did not have anamorphic support. If you needed anamorphic, then the S1 wasn’t the camera for you. Now that there’s another camera (the S1H) with anamorphic support, you want that feature, but it’s for that camera. You need to buy the camera that has the feature, sorry. I understand you’re bummed, but the camera you bought didn’t lose any features. You must have felt it suited your needs when you bought it; if your needs changed, then the camera must change to go with it.
Hey Joseph, Having trouble with Lumix Tether 2.1. I completed the version update to 2.6 for my G9 thinking that was the issue, however it does not work. I believe the issue is that my machine is running windows 11. Can you please advise if Lumix Tether 2.1 is currently working for windows 11?
Hi Sir I Have question. I recently bought Lumix s1 whole kit was cost me 5000$ with vlog. But I'm disappointed why s1 doesn't have FHD 120p with Audio Autofocus. All other manufacturers Offering this. Like sony A7iii Canon R. As ambassador r you able reach lumix about this. greatly appreciate that
Hi! Very helpful videos! I was trying to update my GH5s to version 1.4... and I couldn´t. Then I realized I wasnt running the previous version 1.3... is that maybe the problem? I´m trying to fing de 1.3 firmware version but in the Panasonic support page isn´t available. Any help? Thanks!
Did you enable it? It has its own setting in Peaking options. It doesn’t work quite the way I was hoping unfortunately. It only works while the camera is focusing in AF-S mode.
Thanks Joseph. Please do the Vlog-L sooner than 2 weeks hehhe.. Also if I have a GH5s and I updated the body firmware I DONT ) need to update the V-Lo-L wright ? Thank again btw . I a msg new on all this so that why I ask
Hey I really hope you reply I need you help. I entered into the service mode on my lumix g9 to see the image count and now I’m stuck in service mode and a yellow triangle shows every time I turn the camera off. Do you know how to turn it off or can you put me in contact with someone who can help with that. Panasonic does not have a good customer service
I don't know offhand, but Panasonic has fine customer service - have you tried calling them? If they give you grief about being in service mode… well, that mode isn't designed for users so expect a little grief about going there ;-)
@photojoseph hey Joseph, long time no talk. I'm finally back on the Panasonic horse and using my GH5. Well I went to go update it just now with v2.6 and right in the middle of updating the camera just shut off. I thought it was part of the update, but after a few minutes I turned the camera off then on only to realize to my horror that the entire menu is now gibberish of letters and symbols and I can't use the camera. It keeps shutting itself off. Is there ANY way to do a reset on the camera without the menu? like a 'insert this firmware, power on the camera and it will auto install over the corrupt firmware'?? Any info at all you could help with this would be appreciate I REALLY don't wanna have to send my camera in to Panasonic to have them reset it....grrrrrr thanks
PhotoJoseph is there a link you can provide or the phone # because I’ve spent the last 24hrs looking for a contact number lol and all I get is “live chat” which doesn’t work or at least I can’t contact anyone and a support page. Literally couldn’t find a number to speak with a real life person anywhere
@@photojoseph figured it out. If you have High Sierra as your mac OS, the drag and drop won't work for some reason. Had to use a different computer with Mojave
@@photojoseph Yes I have VFR enabled as I want to choose higher fps like 48 or 60 for slow motion. After the update all the Rec quality modes all have 24p only. I feel silly I can't work this out. Its gotta be something simply im sure. Basically can you help me film in 4k 60fps? Thank you for your help!
For a technology company like Panasonic to require this vlog activation code to be physically mailed is shocking, especially since you can order it online. Even from a green planet standpoint, negative marks. (Besides that thank-you Panasonic for this powerful firmware update!)
Andras Varga-Fekete if you’re an iOS user, add the manual to Books, and you can add bookmarks, highlights and notes. That’s what I do with all user guides.
My G9 does not have the STD menu for selecting VLOG ???? The VLOG update is installed. How the hell do you select VLOG anywhere ... it is doing my head in. I can't instructions how to do it anywhere.
I can't picture what's wrong. My only suggestions are to either call Panasonic's free technical support, or book 20 minutes with me and we can try to figure it out photojoseph.com/1to1
I don't know which was wich but here's the full set of tracks used in this video (this is always listed on PhotoJoseph.com, which you'll see the link to in the description of every video). All tracks are from MusicBed geni.us/MusicBed - Tracks used in this video: Thrills by LAXCity, Miss Me by Breakup, Here we Go Again by Floyd Wonder, No More Gravity by Red Licorice, Brooklyn by Junior State, One Million by Utah