HOW TO FIT A ROCK N ROLL BED in your CLASSIC CAMPER.

Подписаться 78 тыс.

Просмотров 67 тыс.

50% 1

Part four of our VW T3 camper van conversion series. In this video we show you to fit a full width RUSTY LEE ROCK AND ROLL BED into your classic camper.
✔WATCH THE T3 REBUILD SERIES ➡ • T3 REBUILD
✔BUY THE RUSTY LEE ROCK AND ROLL BED HERE: www.combevalleycampers.co.uk/...
✔ For online advise and support with your campervan visit our Patreon Page: / combevalleycampers
🕐 TIME STAMPS 🕐
0:00 HOW TO FIT A ROCK N ROLL BED in your CLASSIC CAMPER.
0:32 The tools required
1:10 Unboxing the parts
1:38 Parts explanantion
3:37 How to assemble the bed frame
6:08 Measure and Cut a Ply Floor
10:15 Test fitting the bed frame
13:22 Leveling the frame and marking the holes
14:34 Marking the drill holes
15:52 Drilling the holes and fastening the brackets
16:35 Securing the kick board
17:22 Overview and Outro
Feel free to ask any questions down below and don't forget to give the video a thumbs up and subscribe to our channel! 👍
To see more of our projects and services, please visit
🎥Filming and Editing: Ali Jassim / just_jassim
WEB: www.combevalleycampers.co.uk
FACEBOOK: / combevalleycampers
INSTAGRAM: / combe_valley_campers
@combe_valley_campers
Disclaimer:
Due to factors beyond the control of Combe Valley Campers Ltd, I cannot guarantee against improper use or unauthorized modifications of this information. Combe Valley Campers Ltd assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Combe Valley Campers Ltd recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Combe Valley Campers Ltd, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Combe Valley Campers.

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@Anomalous-Plant 11 месяцев назад

Mine arrived damaged, so Im glad they wrapped it for you!

@danieldavidmccabe 4 года назад

Nice one. Great series

@JohnRundle 4 года назад

Great video, thanks for the series it’s really helping me out. Do you the measurements for the floor area? I need to order some ply cut to size as I don’t have the space to cut a piece of that size.

@paulatkins5544 2 года назад

Brilliant video, thank you. It answered two questions for me. How to install the bed and how to install the floor! Thank you!

@mwwheels442 Месяц назад

Nice

@pabs2489 3 года назад

Hi from Spain. You are doing and amazing job, and thanks for sharing so many useful tips. Could I ask for the measurement of the floor wooden piece? And what kind of good would you suggest to use? I'll be starting this same conversion in a couple of weeks on my T3 with a Westfalia High Top. On the other hand, would you apply dead sounding, the thermo van linner and the thermo fleece to the High Top, or only the 2 last layers? Thanks again

@Rafa-mv4hi 2 года назад

YOU TAUGHT SO MUCH & Innecesary

@philharflett103 3 года назад

Great videos. How do you attach new foam cushions to it?

@Steve-jd1rr 4 года назад

Great Vid, Leigh. Am purchasing a 3/4 Rusty lee next month for our T3, and will will be fitting it then, so am researching it at the moment on how to install in a T3. Will a 3/4 also sit higher on the engine bay and therefore incur myself having to build a platform on top of the engine bay, if so any recommendations for that ?? Cheers Steve

@mccoysmakingmemories 3 года назад

Nice video, did you make a Video on securing the seat base to the frame? I just ordered a vw heritage frame, I didn't know about rusty Lee at the time are the similar? Just wondering how the seat base and back are held on

@callalilycollective Год назад

Wish I would’ve found this before going with the cip1 POS rock and roll bed. Going to end up swapping out for this one later in the year.

@oldmanad 2 года назад

about to fit this seat myself now, but you didnt cover how you attach the boards to the actual seat? and what you done to make the seat level. what are you adjusting? the music sections dont help with seeing whats going on really :(

@nicholasbateman479 2 года назад

Hi great vid, a question for you. When the seat is folded out into the bed position and level , what is the height difference between rear bulkhead flooring and top of bed base ? I'd of thought the top of bed base would sit level with the rear bulkhead floor and not higher. Would be grateful of a reply a d explanation. Keep up the good work.

@driftbusters 3 года назад

The t4 that comes out of yours in blue, that spoiler would you know where I can buy it? a greeting from Spain :)

@aicram62 2 года назад

Can this be manipulated into being an adjustable bench seat? Seeing as it is balancing on two front legs. I wonder where two other legs could go that wouldn't interfere with the conversion into a bed?

@Novastrom 4 года назад

Thanks for the video. Perfect timing as this is our job for the day! Only issue is we could only get hold of ply from b&q so need to put three boards in. Would you recommend I seat them across the van or front to back.

@Novastrom 4 года назад

Just to add, we are installing a kitchen.

@CombeValleyCampers 4 года назад

I would suggest front to back, so lengthways. :)

@iiRodeoclownii 2 года назад

wheres the follow up video for how you held the boards to the actual seat? I couldnt find it . am about to buy this seat and just want to know everything thats involved first :)

@soniaarquete4646 2 года назад

Olá sou do Brasil e gostaria de saber se você pode me enviar as medidas da armação desde já agradeço.

@bowhunternoms464 Год назад

Quais são as medidas?

@alanhorbury8389 4 года назад

How can you be sure that the van is level to start with, that always bothers me when I'm using a level in the van

@CombeValleyCampers 4 года назад

Hi Alan, we were checking the bed was level with the rear platform :) I hope that answers your question.

@alexhardcastle5951 4 года назад

Really enjoying the series and we'll be embarking on a similar refit once we've got a bit more money... An off subject question though, where can I get some decent wing mirrors for my T25? The guy I bought it from had some Corrado mirrors on it, so I bought some new after market mirrors from a reputable site. They a lot rubbish though, they just point down after I go over a few speed bump even though I've taken them off a couple of times and tightened them up. Are there any other van mirrors that are compatible? Cheers

@CombeValleyCampers 4 года назад

I would suggest looking at using landrover defender mirrors. I beleive sunflower campers (or similar) supply brackets to bolt on defender mirrors

@alexhardcastle5951 4 года назад

@@CombeValleyCampers Thats great thanks!

@Steve-jd1rr 4 года назад

@@alexhardcastle5951 agree with Leigh, speak to jon mansbridge at Sunflower Campers, he sent us Land rover mirrors and brackets and they are the Dogs, no folding in anymore and better viewing from them.

@MJMC56 4 года назад

Standard T25 mirrors aka flappy mirrors can easily be fixed. Internally there's a single nut holding the mirror tight, and it can over time work itself loose. The solution I've found is to tighten the nut, then add a second nut and tighten it onto the first (try to avoid over-tightening the original nut). The two nuts together prevent them from undoing.