How to fit a set of bifold doors to a garden room 

Liam, Its great to have the detailed guidance and you have a great back catalogue of this. But I'm sure most of us are just enjoying being out on site with you and your team and watching it a project come together.

I built my shed/summer house before I found your videos and after watching them I am kicking myself for being so impatient, great videos, really enjoy them just for the entertainment value and the knowledge gained.

Really enjoyed that Liam. Having that level of knowledge and willingness to share is incredible mate. Keep up the great work !! 💪

Absolute legend. Thanks for all the advice warts and all. Great product, great advice.

That was a brilliant film, thanks so much for taking the time to share the know how !!!

Love the warts n' all commentary Liam! Just as it would be in real life and the explanation to the young lad as to why you do certain things answers a lot of the queries that "joe public" would also wonder about but would be too afraid to ask!! Cheers!!

Thank you I learned so much, you are a great teacher.

Great tutorial Liam keep them coming mate

Wow… looking to install a bifold in my Southern California home. The local aluminum bifold company that makes these in house is quoting $11,000. Another locks company for PVC style 8k. Checked the UK direct website for similar size 2400 British lb. Crazy. Jealous. Awesome video btw. Very informational. We’ll done.

Another great video Liam !

Think Davey could give Spielberg a run for his money with the camera work 😉👍🏻👏🏻👏🏻👏🏻👏🏻

Liam great video. This was by far the most informative tutorial on fitting bi-folds I have seen,well done. One thing I don’t think you mentioned the name of the lad filming with you 🤣🤣🤣🤣🤣

Nice work lad’s and girl 👍👍👍👍good little how too video 👍

Another brilliant video Liam

Just fit my new garage roof using EPDM rubber. Had loads of help from your channel with roof deck preparation and installing the new roof kit! Looking to do a garden Room in the future so this RU-vid channel is exactly what I need! Thanks for keeping up with this mega content mate!

Class these videos. Keep up the good work

Thank you for recording this for us!!

sexy piece of craftmanship great job on the glass and door fitting plus jenny is looking great

Great Job , really good attention to detal , I subscribed

Very good job ❤

Love how mad you was that the osb was slightly over hanging when i was doing my joinery aprenticeship i would of loved a mentor like you. Things like that realy anoy me too 😅

Another Wonderful Job Liam and gang... Couldn`t stop laughing at the Door V Sleeper Wall lol, That would definitely be one of My tricks... So why didn`t You get Jen digging out the garden and move the wall back, I`m sure Customer would not have noticed :-) Well done Guys, Keep em coming and Keep er lit.

Great video, I would run a circular saw along the top of the sleeper wall and do a rebate enough for doors to open

Great video

Thank you for another great video. remind Davey to measure twice and cut once

What about the OSB that is so close to the ground, won’t that rot over time?

Would be good to have a rough estimate cost price per build pack size, giving indication to buyers if the build pack size they are considering buying is within their budget.

Hi thank you , can i ask,, do you think there is any downside to internal blinds in double glazed units?

Hey Liam love this vid! Q what’s the build for this with the 3m bi folds? 5m?

I've a slightly unrelated question for you! On one of your previous video's you install the kingspan roofing panels, then you used the metal trim panels to create the corner covers wrapping around the complete corner. My question is which bloody video is this shown on as I've watched loads and loads but can't find where the sodding thing is shown. I've installed the kingspan panels on my roof and want to give it a good finished look. Any help would be greatly appreciated 🙏.

When fixing the sill to the deck are you drilling into concrete under the OSB?

Question: In many of your builds you install opening "letterbox windows" for additional ventilation. Can I ask where you get them from? Most suppliers (including Express Bifolds) quote minimum dimensions of 500mm height. 500mm is huge for a letterbox window. Where do you source ~H300mm letterbox openers? Thanks.

Would 450 DPC wrapped under the joist then in front of the osb and then under your bi-fold be the best thing to stop any rising damp from the patio and stop any future rotting? I take it you’ll be Wapping in breather membrane then cladding but what’s the finish detail under the bifold cill?

Did you release the bogey wheel spring prior to toe and healing ?

We just miterbond the endcaps on, putting the glue on the inside lip, before spraying the sill, but i like the silicone way, keeps it all water-tight, am going to pinch that way off you, lol

I really like your videos and the way you explain things, I really do. Just a couple of tips to improve your videos because I think you deserve: - change rhe microfone. When you are talking your voice is very low and it comes up and down a lot, when you use a drill is way louder because the microfone is closer to it. Just check a couple of them and see what suits you better. - stand for the phone, it is 20£ and you leave the phone in a better position when you need help in the video or need to leave the phone on the floor, there are models who can even be grapped in a stick usefully for medium high works (the heist of your chest or so). The last one, ask your camera to have a coffee before the videos, just teasing, he is not a movie maker, but need to be more "awake" sometimes. Take care mate. P.s: lovely feature the blinds, they don't get dirty but I hope they work forever because fixing them is not a easy job neither. 😉

great videos liam,how much would these doors cost in the video.

What’s the cameraman’s name?

Liam, congratulations on the 70k subscribers!!! Expecting a series of celebratory RU-vid videos of a new build soon? 😀👍

Hi Liam. Just in the planning stages of a 7x4m garden room (with your build pack). For the footings, would you consider using Postcrete sacks for the M24 rods, or is this not strong enough? Postcrete is the simplest solution for me since I am building this alone(!). Thanks

What blade do you use in the saw?

Easier fix just Rebate plane to the wood that way you’ll get the clearance 😁 and save a load of work moving the sleepers back 👍

Roughly how much do these cost to build start to finish

I really want to know how you resolved the issue of the doors hitting the garden wall ? Move the entire wall, or cut and plane the sleepers ?

Everyone seems to be using this flex wrap tape for windows and doors but I don’t see this company using any is it really necessary?

Could your base framing system be used for low level decking?

Is there enough space between the bottom of the OSB board and the patio? Wouldn't heavy rain make the bottom edge wet?

Just wondering if you are fitting the garden rooms in the Liverpool area or are you just staying local , thanks

What steel work do you use above the doors?

Gr8 videos as normal do you have 2nd fix video 🙏

Thoroughly enjoyable watch as ever 👍🏻 Gotta ask those pencils, they rectangular shaped so they simply don't roll away?

Love the videos, have you ever done a house extension with the same style ?

Were can i order the rod system from? Looking to get it started asap

got nothing better to do for the next 104 minutes so lets find out what's what then 😁

Liam do I need to have a cill? I’m installing a single door on my build?

Don’t use silicone use CT1 ..

Why don't you screw through the packers

Fiver for a tube of silicone seal is crazy

Why couldn’t the doors be set back into the room slightly?

You want to get yourself a gasket roller, much easier

Why wouldn’t you de-burr the cut?

Hi, your cill has no reinforceing in it

I only fit Korniche Bi Fold Doors - they are far superior to these. Check them out!

Take an edge off the sleepers

Highly appreciate & thanks for taking time and sharing your skills and knowledge. A question, How did you cladd the rear of wall? I am assuming before installing the wall ?

Hi Liam I’ve dropped you a facebook message hoping you can help me with a question please