How to Fix a Frigidaire Gallery Refrigerator that Wont Make Ice 

For any others who might run into this problem, I spent literally hours trying to diagnose what was wrong after running through everything in the video and nothing seemed to work. I ran into something online that said to pop off the front of the actual ice maker (just use a little bit of force but it should pop off if it's like the one in the video) and if the gears are not moving, turn the large gear 1/4 of the way around clockwise to begin a manual reset process. Within a few minutes water came from the tube into the ice maker but it took me resetting multiple times to get ice and it still didn't work continuously without constantly resetting which led me to believe something may be wrong with the motor. After very close inspection the next day, I realized that probably a mm of two of the wedge tips on the gear had been corroded/chipped off and that was the reason the gear wasn't turning, water wasn't flowing into the freezer and ice wasn't being made. A quick gear order of Amazon for $15 ( www.amazon.com/gp/product/B083HMNWBP/ref=ask_ql_qh_dp_hza ) fixed my issue and ice is flowing back in. Just glad I didn't have to replace the whole ice maker! Thanks @Farm Dad for the walkthrough as I would have never been able to deduce what was happening without this video and learned a whole ton about my refrigerator/ice maker in the process! lol Also my model number was FFSS2614QS6A.

I wanted to take a moment and say thank you. I’m a single woman and I own my own house. And your video helped me fix my icemaker. I know it’s not a major thing but ice makes me happy. Thank you so much.

Farm Dad you go the extra mile to demo problems with a fridge.....I applaud your effort!

you sir are a lifesaver. I pulled the plastic thing out the back and sure enough it was blocked with ice. Thanks for sharing!!!

Thank you very much . Just fixed my mother in laws fridge after watching your video. For her it was the frozen water line.

I just subscribed and I really appreciate your help with the video. It's so good to see people like yourself helping out folks like me. 🙂

This was very clear and easy to follow, thanks for sharing this helpful tutorial.

I had ice in the plastic part in the back top side. I ran warm water thru it and now everything works fine! Thank you for your help!

You helped me in the first minute of your video. My ice maker lever has been stuck in the halfway position for months. I stuck my finger in to feel around for water or ice - nothing. I sat back down to continue your video when I heard the water come on for my fridge. I looked in the freezer, and the arm was down with a full tray of water! It’s a miracle on ice! 😂

OMG, it took me two days to find a video/ website with someone who had enough sense to actually help...I can't believe even the GE techs are so uneducated.. Thank you for saving MY day !!!!!!!!

Hey guys - just wanted to share a fix you might want to try. I had a repair guy finally look at my ice maker (2018 fridge). Turns out there was a design problem (he spoke to someone from Electrolux). Air was seeping into the hole where the waterline goes. If you live someplace that has high humidity it could cause the line to freeze. The fix was to insulate the line in the fridge and also seal the hole. Used to freeze up after 2 days and stop making ice. Has been running great for 2.5 weeks now and makes ice much much faster. Good luck!

You explained that perfectly...it was thorough without being too long of a video...Thank you for the video!

Excellent Video!!! I am a DIY girl and your video was straight forward and easy to follow. The plastic piece in my unit had a solid piece of ice in it. I removed, rinsed, and re-installed it. FYI, the plastic piece comes out easier if you push from the inside. I used a towel to get a better grip. WE HAVE ICE AGAIN! Thanks Farm DAD

I did exactly what you said, and it was frozen going into the fridge. You made an excellent video that was very helpful to me in finding the problem. Thank you very much.

After watching your video I was able to assess what my problems was. I used a pair of bent needle nosed pliers and removed the plastic water piece from the back of the refrigerator and it was frozen solid. I noticed that to remove this piece I had to turn is a quarter turn to unlock and then pull. After I thawed out the ice I simple replaced and quarter turned it into the lock position and then reattached the water source. Thank you for posting your instructional video, it was very helpful.

This was really helpful, big thank you for taking the time to explaining so detailed.

Thank you very much straight to the point all of them! So many videos of people just wanting to hear themselves talk. You are a breath of fresh repaired air!! I am a subscriber and am spreading the news!

Great video. You made it so clear and easy. Fixed the problem I had. Thanx

Excellent, thank you sir. I've used a blow dryer before to melt the ice, but this is much better than overheating and risking damaging the plastic

I had a kink in my water line that required replacement and thought that that would fix the problem. A day later, still no ice: I found your video and checked the water dispenser and sure enough, the plastic thingy was chock full of ice. I popped it out, melted the ice and cleaned the gunk that had built up, and I’m now getting ice. I am over the moon! Thank you for teaching me how to maintain my own stuff!!!

Very thorough video that explained next steps at each point and what to do if that step is confirmed or not confirmed. Subscribed

Oh wow thank you farm dad♥️ u nailed it, your simple video was perfect solution for my no ice problem! I’m boss lady for sure, I love that you said I don’t have to turn off water💃🏾

Great video...... this was perfect and I found the ice in the plastic piece that you showed. I do want to caution those that will doing this, the metal plate behind the fridge that surrounds the plastic piece is extremely sharp. I made the mistake of running my finger across it as I was pulling the piece and ended up with a pretty deep cut in my thumb. I suggest using pliers to pull the piece out if it doesn't budge for the inside, or taping around the metal edge that surrounds the piece. Good luck. Great video!

Omg, you solved my problem within the first 35 seconds of the video! Thank you! I didn't know the on and off thing!

This was extremely helpful, thank you. Straight to the point with different and clear instructions on what to check and do.

EXCELLENT! Very thorough explanation! You should be a teacher!

Thank you, farm dad. You were right - the white tube was blocked with ice. Saved me a service fee.

Hey you are giving good tips ,very helpful for others

😅easily forgotten yeah!glad you shared this so helpful..Joined!

Good to know, thanks. 😊 You are a natural teacher. 👍

This is great, thanks for sharing such useful information. God bless 🙏 Let's stay connected!!!!

Thanks friend, love your interesting content

fabulous tutorial thank you friend best wishes

Great video! Had my refrigerators ice maker working in 5 minutes after not working for months.

Thank you for sharing this information. It was right on point.

Thank you this was super helpful!

Excellent video my friend! All the best to you and yours!

Awesome video thank you for sharing

Thank you very much. I was able to find a frozen blockage in the feed tube thanks to your video. I just discovered a furnace/ac vent under the fridge. With the ac on it was cold enough to freeze the tube.

Thank you so much for video ! You saved us from buying a new refrigerator!

It was EXACTLY as you said. That water trough was frozen. Thanks so much.

Thank you for the video! it was very helpful. ooking forward to watching more of your videos!

Thank you for the tips you just saved me $300 for a new ice maker that didn't need I really appreciated

Great video, frozen line fixed! Thank you

Most detailed...thank you so much...definitely subscribed 🙏🏽

Thanks for video! Have no water coming into fridge and just checked the line and its not clogged. Gonna try replace water filter and go from there. Your video helps with step by steps.

this was exactly what I needed. thank you so much for this video!!!!!

OOOPS, There it is!: Frozen water inlet tube. Was lucky I have a small hand held water steamer. Removed excess ice from tube, removed water supply hose. Injected steam from the inside of freezer until it melted ice and steam came out the inlet. Fixed!. You had a good approach on troubleshooting steps and explanation. Thank you.

Thank you! I’m going to go and check all of these items. Wish me luck!!!

Thank you, helped me fix my ice maker.

Great video 👍

Thank you Farm Dad! you helped this woman out today

Thank you. Great basic quick check before moving on to replacement parts. It would be great to have seen the valve replacement or learn if some valves can be purchased at a local hardware store. I did learn about checking the top stem for blockage from this video but was not lucky and appears to be the valve. Thank you.

Thank you for the tutorial! Just cleared some ice and waiting for the ice to come back.

Thank you my friend you saved my pocket I did everything exactly that you said and the ice maker is working good thank you again iou a lot.

nice video

Great video really helped me get to a starting point

Cool channel. I think I learned a few things. New friend here.😉

U were so helpful❤ much appreciated and God Bless ur new family adventures 💛

Thanks for your walkthrough. Recently our ice maker on our fridge stopped working. Part of the issue was that the water line had come out of the connector. After reattaching and ensuring it was tight, still nothing. Took it apart today and the water inlet to the freezer was frozen solid. So now we are waiting for it to kick back on.

You are my hero!!! I feel so accomplished right now. No ice in my house = No Bueno!

The first thing to check on a new fridge is the on/off switch at the front of the ice maker. Took about 2 seconds to press that switch to the on position. That's it.

I'll add my thanks along with all the others. Thank you, ice maker is working again.

Awesome video. Thanks for the education… now I got to just do it!

Great! Do more videos!

*Subscribed* I had done so much of what was already in this video. Listed to make sure the solenoid was kicking in, no water in tray, even felt the inlet to make sure it was clear of ice, water dispenser working. But, watched this, figured it had to be the chute leading from the water line. Yep! Just wished I had watched this video first!

Wow , i save money watching your video. Fix my ice maker in an instant. Good looking out brother!

Very useful and interesting video

Nice, well informed! The 18 dislikes are the housecalls "they" won't be overcharging for!

Hello Thank you for this Video I was able figure out how to get My Ice Maker working in my Frigidaire Gallery refrigerator. It was just as you showed Ice in the water tube going into the Ice maker and I was able to clear an Ice clog. I could not get the tube out but I was able to use a syringe and a plastic tube and squirt hot water into the tube to clear the Ice. I am waiting for the Ice make to cycle and see if I start making Ice again? Thank You I'm quite sure that now that the ice clog is gone it should start working again I already replaced the water valve assembly. When my water dispenser stopped working about a month ago. because the line was frozen inside the door. Thanks for this video it helped me figure out my Ice maker problem. CHEERS!!

Woo. Great video, new friend here. Best wishes for you, always full done. Thanks!!!!!!!!!

Thanks! Had a frozen supply into ice maker.

Well done. To the point. Understandable. Simple.

Bro you just saved me a service call! Thank you soooooo much !

Thanks Farm Dad. Very easy fix :)

I was not getting ice from my icemaker but I had water on the door so I replaced the solenoid valve and still no ice. I then replaced the icemaker and that didn't help. I have been watching you tube and you showed me how to remove water tube which was frozen solid. Thank you for your help. Daniel Gariglio

Good job sir. Definitely learned from it. Thx

Ty. I was able to fix me fridge with the help of your vid.

Thanks for this, just removed the fill tube at the back of the ice maker and sure enough, it was clogged with frozen water. Removed and cleared the ice clog, hoping that fixes my issue.

Very informative 👏🏿 👌🏿 thank you for sharing 👍🏿 🇯🇲

Thanks for your help spot on. Fill spout was frozen. Thanks again

Thank you for this video

Great video! Easy to follow did all the steps, turns out I had air in my line, to prime the line and get all the air out I just kept turning my ice make on and off until I got got about half a cup of water from my ice maker water line. Thank you for the video!

When pulling out the water feed "spicket" or tube, first turn it 1/4 turn counter clockwise, as there's a tiny plastic locking tab holding it in. This was iced up, on my fridge. Also, there's a tiny funnel on the ice maker itself, that this spicket dumps water into and it was frozen up too so, I actually had to remove the entire ice maker (super easy) and let it thaw out. You're processed worked great. Thanks!!

Defrosting the water chute and replacing the filter got my ice maker going again. Thanks.

Cheers and like from edu my friend 👍

I love seeing what people have in their frig.

Our ice maker keeps freezing up 🤦🏻‍♀️ I have to take a butter knife and beat the ice off of it so it will start making again. Any solutions? Fridge is less than 2 years old.

Well.... so it turns out my spout was frozen solid like you had told us to look for.... thanks for the video 👍🤙

That was wonder hellnyeah thanks for sharing

Thanks. I couldn’t figure out why my used fridge wasn’t making ice. The guys who delivered the fridge forgot to put the bar down.

Thanks very helpful!

This is a very well done video and has helped me with my freezer. But it doesn't cover the problem I have now. It seems like there is no power getting to the freezer light and the part that pushes the ice out. The light was coming on intermittently when I lifted the ice maker unit and the dispenser would start to work. But now it doesn't come on at all and the dispenser is dead. It seems like a connection is loose. Do you have any idea where to look? Thank you.

I’m at the point where I have the green tube in a bucket. I see a little bit of water within the tube and when I shake it, some water comes out. However, the water doesn’t look like it’s fully through the line. I can see increments where it stops and goes. How long should I leave it in the bucket for before I can determine this is the issue? So far it’s been in the bucket for an hour and no water is in the bucket. At one point should it be flowing out or should there just be a little water in the bucket? Thanks so much!!

Thanks to you I'm now a Licensed RU-vid Technician 🎓

Thanks for helping me fix this!!! It was just clogged with ice chunk but I had no idea I could just pull that out of there!

Thanks for the video. I was troubleshooting my daughter’s ice maker and the tube to fill the tray was plugged with ice. Some hot water cleared it out and started making ice again.

very informative vid. was nice to see a exact fridge like mine used. Question for you, I am having difficulty with freezer compartment being too warm. have adjusted temp several times. ice cream soft, some items not completely frozen. any advice?? thanks,gary

That was an excellent precise video thank you.

Dude at 0:52 I thought that was my cat yelling, I had to pause the video and go find him lmao