How To Fix a Noisy Bathroom Exhaust Fan | Easy Project

Подписаться 954 тыс.

Просмотров 349 тыс.

50% 1

Most people are quick to replace a bathroom exhaust fan when the issue could be something which is easily fixed in a fraction of the time and cost. This video will walk you through step by step fixing an interference issue between the fan blades and the motor bracket on a Nutone 8663RP Exhaust Fan which was causing a ticking noise that was super annoying. Even if you have a different issue like a bad fan motor this video will help you fix the problem and the below parts list will point you in the right direction.
Note: Broan and Nutone Bathroom Exhaust fans share many of the same parts. You could have a Broan Model 750 or 751 which will be identical to the Nutone 8663RP featured in this video.
Parts List
1. Nutone Exhaust Fan (Model: 8663RP) - amzn.to/2EVIAj7
2. Motor Assembly (Model: S97017705) - amzn.to/2tZITHv
3. Fan Blower Wheel (Model: 5901A000) - amzn.to/365Ektk
4. Fan Motor (JA2B097N) - amzn.to/2QtEQuv
5. Push Nut Used - amzn.to/2tatwLA
Tools Every Weekend Warrior Needs
Makita Corless Drill Combo Kit: amzn.to/2Jsw78j
Dewalt Drill Bit Set: amzn.to/2w0xAA4
Dewalt Screwdriver Bit Set: amzn.to/2UqTvK9
Craftsman Screwdriver Set: amzn.to/3bAsNEG
Eklind Allen Wrench Set: amzn.to/2wKDu8M
Pliers (4-Piece Set): amzn.to/2JlYUM7
Stanley Utility Knife: amzn.to/2Us2pqG
Stanley Tape Measure: amzn.to/2WPzr5K
Studbuddy Stud Finder: amzn.to/33SaZC4
Johnson Torpedo Level: amzn.to/3dzx5Ot
Stanley Hammer:amzn.to/39tudPL
Buck Bros Wood Chisel Set: amzn.to/2QTebYO
Klein Voltage Tester: amzn.to/2XMa1I2
Wire Strippers: amzn.to/2NHHKuS
Little Giant Ladder: amzn.to/2UrFmfG
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Хобби

Опубликовано:

27 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@toriankirland383 2 года назад

*Works great with **Fastly.Cool** , exactly as described. Love the fact that it can push, pull, or exchange air with the push of a button. The remote is a nice bonus too!*

@rxsullivan 3 года назад

Your video taught me exactly what I needed. I thought I might have to replace my unit, but I did what you showed, moving the fan up just a little bit (after a thorough cleaning), and my Broan Designer Series fan/light with night light is quietly rock-and-rolling again. Thank you so much. Money in the bank!

@EverydayHomeRepairs 3 года назад

Hahaha, great to hear and always nice to save some money 💰 👍

@lakerkid8 2 года назад

Great video. I'm gonna have to do this in a few days. Side note...after you reassembled the fan and plugged it in, I felt a breeze and thought to myself "wow that's amazing" then I realized my a/c was on I'm sitting underneath a vent lmao

@skittles2055 Год назад

😄

@Noob-jt4ju 4 месяца назад

😂😂😂

@trumpeterchris 24 дня назад

This cracked me up 😂

@thetds101 3 года назад

Thank you for saving me grief. I temporarily fixed the squeak, but I'm getting a new motor. If you haden't done this how-to video, I'd have been clueless. As a first time home owner (and former lifetime apartment renter) I had no idea how to handle this. Once again THANK YOU!!!

@geo1142 2 года назад

Thank you thank you thank you. Mine made the same noise. This is exactly what I needed. I didn’t know how to take out the fan/motor piece. Didn’t realize it came out with one screw and I thought it was the whole metal frame that needed to come out. So I just let it go and didn’t use the fan for a couple months until I could get some help or hire someone to do it. Took some pics of the exposed motor unit when I took the light reflector off. When I showed them to a friend who zoomed in on the model number and found one on Amazon for $60. From there I searched RU-vid for a DIY and here it is!! I had it replaced in minutes. I decided against fixing a 15 year old unit and replaced. I did fix it when I took it out, like you suggested and stored it in case someone would need a replacement. Again, thank you thank you. You saved me $$$.

@kurtdesoto2335 Год назад

Absolutely WONDERFUL tutorial. My fan died and I thought I would have to climb into the attic to swap out the whole unit when it was 220 degrees up there!! I see YOUR fan was clean, but mine was so caked in dust that I thought about calling a HAZMAT crew. Luckily a small vacuum, a toothbrush, some Q-tips, and a change of (dusty) T-shirt did the job. I will be sending you a donation and a nice card from my wife because she didn't have to worry about keeping me hydrated if I ended up in the attic (and ready to call 911 if I fell through the ceiling from a heat stroke in 330 degree temps up there). PLEASE keep up the great tutorials. I subscribed a while ago and enjoy your videos!!

@felizesperar9981 Год назад

Thank you SO much for this video - I was able to take my fan down, clean it out, and put it back up with no problems- I could not have done it without your video- I didn't even have the same type of fan, but it was close enough! Thank you!!!!

@danielluthergraves663 4 года назад

THANK YOU for this video. I had done the first couple steps on my own, but your explanation gave me the confidence to continue. Your suggestion of vice grips was very helpful.

@EverydayHomeRepairs 4 года назад

Glad the video helped, thanks Dan.

@donntakebayashi9424 4 года назад

Thanks for the great video! My fan blades were slowly sliding down the metal motor shaft and hitting the casing. I put some electrical tape around the shaft to keep it from sliding down and it works great! Without your video, I'm not sure I would have tried anything other than just cleaning it and ignoring the noise...lol.

@EverydayHomeRepairs 4 года назад

Hey Donn, always nice when a small fix makes a big difference. Good work on the repair!

@philipcapunitan1954 2 года назад

Thank you for posting this video! Fortunately you had the exact model we have and your detailed tutorial helped me address the problem. Our fan now works perfectly. You save me time, money and headaches lol

@dustymiller1560 3 года назад

Thanks so much for the video. Fixed the noisy fan and now have peace. Priceless!

@EverydayHomeRepairs 3 года назад

Fantastic, happy to help!

@davidfrahm9530 2 года назад

Thank you, thank you! We have this model and your instructions were complete and detailed and we are up and running! You ROCK!

@YevgenLasman 2 года назад

Thanks for the video, super helpful! I have the problem with similar device and tried to see how to fix it, but my problem is a bit… weird. It is actually that once I adjust the fan to no rub on either top or bottom plates, after I start the engine after few seconds the fan blade slides down to the motor plate and start to rub it up badly. Thinking about a splint to be put into that flat part.

@markusFFF 2 года назад

I have a different model fan but it sounded like it was struggling when on. I did an inspection and it was caked in dust. After a cleaning, the fan sounded much more quiet. Thanks for the tip!

@pobbard Год назад

Thanks, this was really helpful! It helped me figure out how to remove and dissemble the fan - wonderful. In my case, after cleaning and reassembling it, the fan enclosure still kept sliding too low on the shaft and rubbing against the metal plate. I finally solved it with a tiny piece of flexible tubing fitting snugly on the shaft (roughly 1/4") which was just enough to keep the fan from rubbing against the plate.

@pobbard 7 месяцев назад

@@squirrelattackspidy My local hardware store sells clear plastic tubing by the foot (in the plumbing section). I took the motor with me to the store and just did some trial-n-error to find the right size. The fix cost me less than $1! 😉

@squirrelattackspidy 7 месяцев назад

Thanks for that awesome piece of info! We have a home Depot and a Lowe's in my area. I'll check with them to see what they have available for tubing. Do you recall the inner or outer diameter of the tubing? I'm looking online right now. I was thinking it through and now understand why you want the tube snug on the shaft. If it's not, then the bottom of the plastic may end up rubbing on the bottom of the plate and will either erode or melt from the friction.

@chrisxavier1848 3 года назад

Thank you for a clear and precise presentation! VERY helpful.

@JT-gq8wv 4 года назад

Well Done. Excellent idea to add the narrative post-production as opposed to dealing with ambient noise. I learned a lot. Thank You. I subscribed.

@EverydayHomeRepairs 4 года назад

Thanks JT!

@skythekeeper Год назад

Great video. Used these steps to get my fan to quit making noise. Just thought I'd point out that rather than buying something at home depot and destroying it for the push nut, I found the exact nut I needed at autozone in a Doorman assortment kit for 5.99. Part #13441. Had 2 of the 1/4" nuts, along with a bunch of others I may or may not need someday hah. Anyway, keep up the good work!

@kosta2177 2 года назад

Thank you. My vent system is not exactly the same, but after watching your video I was easily able to figure it out. I also provided some wd40 to spinning parts and it worked like a charm

@EverydayHomeRepairs 2 года назад

Nice!

@katmichaelis2412 3 года назад

You were AWESOME! So easy to understand and calm. Have removed, replaced motor etc. Went to put back in ceiling, very difficult to fit? I found the slots and lined them up however it does not fit easily. I have not forced, but Houston, we have a problem? Thank you sooooo very much.

@iluvwanesworld Год назад

Great video! I like how you cleaned everything with soap and water. Most guys only vacuumed or wiped with a dry cloth. Only thing I would do different is clean the motor with my hose outside, living in the Phoenix area where the air is dry I do all my appliances with a hose. I just give it a couple days to dry.

@TheAudioman15 2 года назад

Amazing. Great video man! Excellent explanations on everything. Man, what am I gonna do without RU-vid!

@reynergy 4 месяца назад

This was a fantastic video. You broke everything down in a very understandable way. Great teacher you are - Yoda

@99larrythecableguy 4 года назад

Love the video and great stuff. Working. Who would have thought cleaning the fan will clear the problem!

@EverydayHomeRepairs 4 года назад

Yeah, these exhaust fans get accumulate build up over the years. A quick clean can make a big difference. 👍

@dpm1964 Год назад

Great video, thanks. Any thought of lubricating the shaft of the fan before reinstalling?

@HarpreetSingh-wn6kp 3 года назад

Very well done instructions, great job. Helped me fix my fan. Thanks.

@EverydayHomeRepairs 3 года назад

Nice Harpreet, glad the video helped out 👍

@jilliansala139 10 месяцев назад

The summer nights here were horrible and this brought much needed relief

@sailor-jim Год назад

Finally found a video showing my style bathroom fan. And a great video it is!! Steady camera work - so important!

@TerrenceHoHoHo 2 года назад

This was really helpful! I was able to get our fan working again.

@TerryJohnson757 2 года назад

Thank you so much sir. I just purchased a home and have to fix my sons bathroom fan. I had know idea how to even start until I found your video.

@kyleguy2305 3 года назад

Exact same fan as mine only mine was even more dirty works great now! Awesome video

@EverydayHomeRepairs 3 года назад

Nice, thanks for the kind words.

@possecommietaters1432 Год назад

I came here simply to find out how to remove that cover so that I could change the bulb. Boy did you ever help. I was trying to *unscrew* the thing. Thank you.

@billreichert6842 Год назад

Very good video. Easy step by step instructions showing exactly what to do.

@thedillybot 2 года назад

Worked like a charm and it was easy. Washed the grill, took the motor and ade out, washed the blade while it was attached to the motor because I couldn't remove the clip, used a vacuum to clean around the motor, drop of wd40 and white grease into the motor, now it is quiet as a whisper again.

@rtatbone 3 месяца назад

Just bought new unit. Probably didn't have to buy finally working after years. Thank you

@richardhodgkins6935 5 месяцев назад

Great instructions!

@edwinbarreto58 2 года назад

Excellent and most useful tutorial. Thank you

@hellfire42107 2 месяца назад

4 years later and helped me with my first house, thank you!

@aldanemarais5662 3 года назад

Thanks for the vid Opened up mine and found out it was the cover full of dirt. Sometimes you just gotta make that first step on your own

@EverydayHomeRepairs 3 года назад

Glad it helped 🙌

@davejayasinghe575 3 года назад

Good job bud. Good to see you here.

@EverydayHomeRepairs 3 года назад

Hey my friend, how are you? Hope all is well 👍

@capthavic 3 года назад

Thanks for this video, helped me replace a burned out fan/motor.

@Sardy540 4 года назад

Excellent video mate!

@EverydayHomeRepairs 4 года назад

Thanks Mat!

@robertdunn9407 2 года назад

Excellent video. Well explained with good images. Made quick work of the swap.

@josephandrews2353 4 года назад

Damn good job. 👏 Excellent 🎸

@EverydayHomeRepairs 4 года назад

Thanks Joe 🤘

@shoppysharp9355 Год назад

This video helped me! Thanks! Best Exhaust Fan videos that I found.

@brianjmortensen 4 месяца назад

Very thorough, thanks for the tutorial !

@jamesbrowne1576 Год назад

Great video! My cooker exhaust fan is leaking rain water on the cooker top and I need to replace its roof pipe vent. What is your favorite roof pipe vent for this? (I have a gable roof)

@claytontiderman1697 3 года назад

I need some help... I put the fan back on the new motor, plug it in to test it, and the motor and push nut spin around but the fan is still. Is the push nut not properly sealed to the fan? I didn't crack the push nut at all. Is it possible the plastic fan is worn down where it seals with the push nut? Any advice? TIA

@joseph-ine452 Год назад

Outstanding great service fan exhaust Real clean too

@chenglee6065 3 года назад

THANK YOU so much! I'm so glad I watched this video before rushing to a store to buy a replacement! Adding WD-40 to lubricate the rotors got rid of the squeak!

@EverydayHomeRepairs 3 года назад

Nice, always love the quick fixes.

@timhoran7676 Год назад

WD-40 May work, but it may attract dust too. There may be a better lubricant to use, such as the choices used for lubricating a door lock.

@wigletron2846 3 года назад

I have the exact same fan with the exact same problem. Only difference is the shaft is splined, almost like a car axle. I don't have a lock washer, the fan is just kinda jammed on the shaft. I need to shift it upward to stop rubbing the bracket but I can't move the fan. It feels like the fan will break if I pull it too hard and it's really stuck. Do you have any advice to get it moving?

@ssap3717 3 года назад

always check to see if the damper in the duct is working and not stuck. had to remove mine. just adds extra load on fan

@BrittCHelmsSr Год назад

I have one of these with a nightlight socket in my downstairs bath, and we love it. I did put an LED bulb in it because a conventional bulb burned out way too quickly.

@glennnelson5946 5 месяцев назад

Thanks for this! What would you do if the fan does not stay seated? In other words, after following all your steps, everything was whisper quiet, but got noisy after an hour or so.

@mikewetzel1162 2 года назад

Good job man. Thanks

@timhoran7676 Год назад

Great explanation!

@meghanberking4680 7 месяцев назад

Hi, great video! I'm trying to clean my fan to reduce the noise it makes and I noticed that mine doesn't have a push nut above the fan blades. Does this cause the fan to make more noise somehow?

@lflcoast Год назад

You saved the day, and my fan. Thank you very much

@bad-hat-harry 4 года назад

Nice video. Thank you.

@EverydayHomeRepairs 4 года назад

Happy to Help!

@btd2516 2 года назад

3:00 Most times you can find those push-nuts easier at auto parts stores, like Auto-zone, Advance, etc.

@wxdr1 2 года назад

Great video!

@mmiles6015 3 года назад

What about dust beyond the fan exhaust in the pipe last the exhaust fan?

@lindaholding5181 Год назад

Thank you so much.

@TheIndeets 11 месяцев назад

Thanks! Just fixed my fan :)

@jayjudd6518 6 месяцев назад

That gave me confidence. 😊😊

@WestEmployee 3 года назад

Curious I also have a nutone 8663rp “b” unit and when I took it off the wall, there is no push but holding the blade to the motor, and the blades aren’t coming off

@MinnyMann 3 года назад

Hi, thanks for this. I have a super old fan and can’t get the push nut off?😬

@EverydayHomeRepairs 3 года назад

Is it rusted on? If so, do you have some WD-40?

@johnsujith12 4 года назад

Thank you! Going to clean mine today

@EverydayHomeRepairs 4 года назад

Nice!

@johnsujith12 4 года назад

I cleaned mine, washed the fan with dish washing soap, felt good :). Like Scott mentioned - Please wear safety glasses to protect your eyes. I did not and had to rinse my eyes couple of times... Thank you again Sir!

@mattmillman6640 Год назад

super helpfull thank you.

@kenmystery9754 Год назад

Thanks buddy ,I just fixed my fan !

@James_48 6 месяцев назад

Any thoughts on what might be causing noise - only when the fan is installed in the housing? When I remove the fan and bench test it - it's whisper quiet. Often I can reassemble and it's quiet for a few days, but then the noise comes back. Then again, when I remove it from the housing it's quiet. I assume my noise source is a vibration in the housing but I can't pin it down.

@rtatbone 3 месяца назад

Thanks!

@residentmanager3088 2 года назад

Excellent! Mahalo! 🤙🏻

@GMoney-B 3 года назад

Thank you for the video! I am eager to try fixing mine. I hope it's not the housing though. When I turn it on it sounds like a freaking semi truck is parked ontop of my bathroom! Just a suggestion on the video production side, You should try looking at the camera lens vs the viewfinder, it creates a much more natural and genuine connection between you and your viewers! :)

@EverydayHomeRepairs 3 года назад

Hey Gavin, best of luck on the repair.

@GMoney-B 3 года назад

Everyday Home Repairs thank you!

@kgoldric Месяц назад

Mine is no longer spinning and making a humming noise. I'm hoping it's just jamed up on filth and needs some lube. Thanks for the disassembly walk through.

@markchairez8474 Год назад

Do I have the shut the power off before unplugging it && taking it out?

@user-ms2bi2hh1u 5 месяцев назад

Hi. At the 4:26 mark of your video you pulled on the motor shaft and it moved in and out. This is what mine does and is cause of the rumble noise. As the fan spins the rotor and shaft lift out of motor and rumble. there are some kind of spacers inside on both ends to stop this but don't know what they are or can find a parts list for this type of motor. thanks

@kgoldric Месяц назад

I just got mine working again. The fan blades had shifted down the shaft and wouldn't let it spin. There was no starlock washer, either broke off or was missing from a prior repair. I bought two ~6mm c-lock washers and I was able to press them in place to hold the blades at the proper spacing.

@lukewalter8987 3 года назад

Thanks for this video. That noise was annoying.

@EJ4060 3 года назад

Our fan has not worked in probably 7 years. I bought this same exact one and replaced it today now it works great! Easy thank you for the video!

@specialsam24 10 месяцев назад

New home owner here! If the fan still touches the bracket can just put a washer between?

@TT-fn1xb 4 года назад

I wish I understood this video. It seems so complicated to me though it's clear that a lot of people have benefited from it.

@EverydayHomeRepairs 4 года назад

Hey TF, which part do you need more help with? Is your exhaust fan making noise and you want to see if you can find the issue?

@TT-fn1xb 4 года назад

@@EverydayHomeRepairs thanks for reply. Yes, the exhaust fan is making a ticking type sound. It is mounted on the wall not ceiling. There is no brand name and the vent part is circular in shape. I just dont know where to begin with it.

@th3pianoplay3r Год назад

Thank you!

@benoitraymond1997 3 года назад

Great video. I literally have the same model than you. The only problem is that after replicating all the steps, the white fan part is still sliding down the shaft. I tried putting some washers in between but it’s still creating a lot of noise. Do you have any suggestions ? Thanks

@EverydayHomeRepairs 3 года назад

What about just ordering another blower fan wheel assembly amzn.to/365Ektk ? The new assembly should have a better friction fit on the motor shaft and then stay in place reducing the chance of interference / noise.

@benoitraymond1997 3 года назад

@@EverydayHomeRepairs I like to explore all options before I have to buy something new. It’s not about the price but the principle of trying to fix it 😂

@hey.hombre 4 года назад

I have a Brevel Corp fan motor that needs repair. It makes noise. I'm going to try to move fan blade to see it that works. If it still makes noise where do I find a replacement? The housing in the ceiling is round. So just simple swap out is not going to work.

@EverydayHomeRepairs 4 года назад

Once you get the motor out you should be able to get the exact model number to use in your search online. Amazon has some sellers with a pretty good selection but usually once you get the exact model number a google search will point you in the right direction with the online dealers. I have found the pricing to be reasonable on these fans which is also a bonus.

@mirelurkhomevideos Год назад

i cleaned mine and it still made a grinding sound so ive decided to spray the shaft with silicone spray lubricant and let it sit for 24 hours to dry. and put it back up and it ran nicely like new again

@basharatnazeer4697 2 года назад

Awesome 🙂

@geebeeman1 4 года назад

Did you also turn off the fuse to the fan?(And not just the flip switch.)

@EverydayHomeRepairs 4 года назад

For this project I just flipped the switch since the fan plugs into an integrated outlet opposed to being hardwired. It is always the safest to turn off the circuit breaker so be cautious and pick the path you feel the most comfortable.

@william8654 3 года назад

I have the exact same fan and is was grinding. Followed this video and it took about 15 minutes total. Put it back together and no more noise. I don`t know exactly how it was fixed but it is quiet again!!

@EverydayHomeRepairs 3 года назад

Nice, got to love the easy fixes 👍

@chasebradley3324 Год назад

There are 20 replace videos you have to scroll past to find this lol thank you.

@abdihassan4944 3 года назад

Thx your the best

@EverydayHomeRepairs 3 года назад

Thx Abdi!

@tylerwaxman7512 3 года назад

Well done, nice and clean.

@EverydayHomeRepairs 3 года назад

Thanks Tyler.

@jebatman756 4 месяца назад

What if it was louder for a few months and I didn’t get around to fixing it and now it’s barely making a noise and def not working when I turn it on?

@JohnSmithdoe Месяц назад

Thank you , u saved me 150$ and a lot of aggravation !

@sultandamani9069 2 года назад

How u clean the Actual Motor..

@p.g.8138 Год назад

You can use electrical parts spray to clean motor.

@gusrice6180 4 года назад

Problem with my motorshaft is that it’s not keyed but had grooves in it . This sucks because the plastic fan eventually just strips out

@EverydayHomeRepairs 4 года назад

Hey Gus, if you buy and new fan and ensure no interference I would imagine it should run for years without issue, right? Still be a better option and should cost much less than a whole new exhaust fan.

@tarabhat815 4 года назад

I don’t see the URL links at the bottom, to order parts, as you mentioned in the video. Is it just me?

@EverydayHomeRepairs 4 года назад

Hey Tara, the “Description” can be a bit hidden. Look for a little arrow to click on the right hand side of the video title or directly below the title. Then it will expand with all the notes and links in the description.