HOW TO FIX A SPRINKLER ZONE THAT WON'T TURN ON w/FIX IT NAT 

You made the most clear and simple video on replacing a solenoid. I was able to fix 2 faulty solenoids and have my sprinkler system back in order. Thank you so much! You rock girl!

Awesome! You need to do this full time!! Your plain speak and simple explanations are gold.

Just fixed it, thanks to you. I saved about $500 and it was so easy. I wll only watch your video's for anything needing to be fixed!

Thank you for sharing! Going to try to fix it on Monday. I was always nervous about the electricity, so I'm grateful to know that it isn't a concern. :-)

You killed it! I just ordered two SOLENOIDS.

Make sure you understand there are two wires . The common and the active. She talks about it being a ground. There is a difference between a ground and a common.

Thank you so much! You made it so simple and clear. Love it!

Great directions. Thank you. Clear and simple. Great encouragement.

Love the “can do” attitude! Thank you!

You are amazing! I love your video with the "girl power" element in it. Thanks to you I fixed my solenoid with ease and confidence. In solidarity with you I also cut the electrical tape with my teeth:) Thanks!!

excellent! I'm a fit it kinda girl and I enjoyed your video. I"m gonna fix my system today. thanks!

This is a great video. Thanks for saving time and money.

Thank you , super simple and very informative

Fantastic video! Thank you so much👍💕

thanks for the demo and info, have a great day

Thanks so much for this! Fixed my sprinkler! Would definitely love to see a video on replacing the controller!

That was great I am going to fix mine tomorrow thank you for sharing

Thanks Nat, good and short.

Great simple video!

Thank you for this video!!

Maybe I *can* do this. Gonna try. Thx for great video! ❤

Very informative video 🙏🏽👍❤️

My favorite sprinkler guy

Great job!

thank you for this!

Hi, I like your video. Thanks

Best video I've seen :)

That's my next step thanks

You are amazing Nat!! Thank you so much for sharing.

Thank you. It worked

excellent video

Excellent! Love to see the ladies get involved! We can do it.

well done! thx.

I'll look in your other videos, but I found this one because I just turned my water on to the sprinklers, and one zone came on, and the sprinkler box was at to off. No zone should be running. I turned the water to the yard off, and am now researching what to do. If you have ideas, id love it!

Thank you!

Good job

My only addition, is that you should have used water resistant wire nuts. Your irrigation components are underground and exposed to water.

I'm just a dude learning from a smart chick. 👋 Great video!

Hi Nat Awesome video! I have a zone for the flowerbeds that won't turn off. Long story,, but I want to keep that zone shut. If I cut the wires to the solenoid, will that valve stay shut? Thanks a ton and hope you would respond to this. Jay. 🙏

I’m glad you didn’t have to use the circular saw

Thank you madam

awesome thanks.

You should put grease caps on the wires

Wow! I love a lady that does not mind to get her hands dirty… and a beautiful one at that! Thanks for sharing! I’m gonna use what I just learned from your video to fix mine!

Awesome

I will give you advice based my experience. When solenoid is not working The best is to replace valve and solenoid at same time.

Exactly go girl gonna try this tomorrow!!! Thanks

All of my solenoids are under water along with all of the wires. Any suggestions?

I have Chain solenoid and diaphragm in this one zone still won’t work could it be the timer It works if I turn it on at the solenoid by hand HELP Please

My sprinkler comes on mulitple zones at the same time. Like turn on zone 3 and zone 5 comes on at sametime. How to fix that

Haha your funny... AND handy!!!!

Hi Nat, great video!! But I have a question for you. All of my zones but one are working fine. And unlike the other zones, when I try manually turning it on, I get nothing. If it was a bad solenoid, then I assume that I'd at least get water coming out when I turn it on manually. Any suggestions?

Do you know why a single sprinkler of mine isn’t working? It’s not the whole zone. I’ve tried removing and cleaning the nozzle, changing the nozzle but didn’t help.

My respect. ❤

My DV 100s cracked. all of them. It's a nightmare

Now that's girl power.

Does the power have to be shut off?

OMG women are so much smarter. All these guys with their long dragged out video's with voltage meters LOL. I have been struggling for days trying to trouble shoot it until I stumbled upon your video. This just did the trick. Bought the part and YAS all is working perfectly. You go GIRL!!

Don’t use pliers! You’ll strip the treads.

The connection must be waterproof. Look into fixing that, girl.

Don't you need to turn the electricity off or is that not an issue?

Dam can cook as well ?

You don’t zoom in nearly enough!!!

and your cute

first of all you never mentioned what your water source was because if it was reclaimed, potable, or a well with a pressure tank your not going to be just pulling that solenoid of without killing the pressure off of it first otherwise the zone will more then likely start and you will get a stream of water in ur face from under the solenoid. next that was a rainbird solenoid you just installed and i can tell you from experience that its alot more then 12 dollars 😂😂. then you wired the solenoid then said next to put your top on ..... ahh no that top will only be put on before those wires get tied together. thats why you didnt put it on when you said that. other then that your fault isnt always the solenoid either. it could be a bad connection or bad mod on the controller so i would test the voltage to the solenoid then the ohms from it at the controller to see what your working with first peace out

What a mess of an install….

Please get a better camera man

fire your cameraman. need to focus on what your talking about instead of you