I can hear our valve has water flowing through it but does not leak water when solenoid is loosened nearly 5 turns, and the manual bleed screw does not turn on heads or leak water. Flow control is fully loosened too, solenoid was tested and works. I think there might be a clog in the valve but i took it apart and the whole thing was clean as a whistle. Im thoroughly confused now
My system stopped turning on at its scheduled time. I changed out the entire top of the valve, but it still won’t turn on at the scheduled time. I can hear the click at the valve at its scheduled time of 7AM for it to turn on, but it doesn’t come on. I can manually turn it on at the controller box which doesn’t make sense to me. I can’t figure it out. Any suggestions?