How to Fix a Squeaky Belt (figure out where the squeak is coming from)

Подписаться 10 млн

Просмотров 1 млн

50% 1

Belt squeal, squeaky belt, belt noise? Learn how to fix a squeaky belt in your car. Usually the belt noise comes from the belt tensioner pulley, idler pulley, or the belt itself. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, fan, and waterpump. There are three types of serpentine belt wear, pilling, glazing, and abrasion. Pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking. I show you how to use water to identify what type of squeak problem you have and then how to find the problem.
Here is the belt that will get rid of the squeak due to misalignment: www.amazon.com/s/?_encoding=UT...
Diagnose a Squeaky Belt Part 2: • How to Fix a Squeaky B...
Replace Idler Pulley: • Idler Pulley, How to r...
Replace Tensioner Pulley: • Belt Tensioner Pulley,...
WD40 to quiet the belt: • How to QUIET a squeaky...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

15 июл 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 672

@kaanaksu4273 5 лет назад

I'm currently 16 working at my dad's workplace and i must say that these quality video's help me sooo much impressing my dad by doing it myself JUST because of your video's chris!!! I love them and i actually want to support you in anyway to motivate you to make more of them they help so many people Chris you have no idea. AWESOME!

@theperson123able 5 лет назад

Good shit man, keep it up!

@returntotiffany4600 4 года назад

You seem like a great 16 year old! Well spoken, polite, respectful. It's very refreshing to come across that these days. Well done, dad! And well done to you as well young man!

@funwithry1320 4 года назад

👍👍👍

@greathoonta3461 3 года назад

Alpha yeah, they make replacing and installing things much easier to do.

@felicianomireles3280 3 года назад

Yes sir

@fuelgasscrubber 2 месяца назад

8 years since you made this vid and it's still helping people. Thank you sir!!

@Tristann616 9 лет назад

My TL has been squeaking in the morning for the past few days, and I was so excited to see that this video was uploaded. It couldn't have come at a better time. Thanks ChrisFix, I'm learning so much from you!

@chrisfix 9 лет назад

Tristann616 My ChrisFix senses were tingling lol. Glad the video was helpful bud and I am glad you are learning a lot!

@tangentyes3323 5 лет назад

Great video, nice to see someone working on cars that knows how to edit and get proper shots

@cmax10m 5 лет назад

Great video man, I have come across some pretty crummy videos, i.e. filming, lighting, sound. They might as well not make them at all if you cannot see or hear them. But your videos are legit, THANK YOU!

@frankielovato6575 3 года назад

I just got my first car from my dad it’s an old 2001 Chevy Malibu he said once I get that squeaking fixed and the car worked on it’s be ready for me to cruise so this helped me out a lot thank you man

@poopdust5368 4 года назад

Really enjoy how this is straight to the point. Super helpful and a nice change from other videos.

@joelmessina8410 7 лет назад

Best car fix tutorial of all time, awesome!

@jimmyfaseler5968 5 лет назад

Checking for cracks only works for older vehicles. In the late 90’s the rubber used in belts went from a neoprene compound to EPDM. EPDM doesn’t crack, or has very small cracks that’s hard to detect. This is because EPDM rubber handles higher temperatures. The cracks you see in neoprene belts are caused from heat. From the looks of it, the belt on your car was neoprene and that new belt in your hand was EPDM. You can sort of tell, because EPDM has a bit of a texture to it. Neoprene belts look more smooth. The best way to check for wear on EPDM belt is wear between the ridges. As the belt gets worn, the ridges between the ribs will get deeper and wider, causing the belt to have less grip. Usually around 90k-100k miles. Love your videos, and you’re dead on about the other signs of wear. The spray bottle test is extremely helpful.

@deansoffice6733 2 года назад

It is awesome that I was able to solve squicking problem in my car through this video.. thanks Chris!

@jbradley920rox 5 лет назад

3 years later and thos video still comes in handy 👍👍👍

@jeffsjefff1254 6 лет назад

I just got a 1999 Honda Accord EX 2.3L 77,000 Miles, driving it about a month now and belts started Squeeking. So I'm thinking this Video has just helped me a bit... :)

@chrisfix 6 лет назад

Awesome! Glad the video was helpful!

@DanesAnimales 9 лет назад

Awesome video! Great step by step instructions. A little fun fact, besides the use for aligning, V's are also used to transfer the force (generate grip) to the pulley. It does this by exerting the force perpendicular to the face. By using a V, you double the surface area to transfer the force. Another benefit is when you increase the force on the belt, due to the V's, you automatically decrease the amount of slip and therefore increase the amount of grip. Amazing little things those V's are.

@chrisfix 9 лет назад

premiumoptic Great tip/info bud! I really appreciate the extra info because it really contributes to the video when people read the comments!

@stunnerla 3 года назад

Don't understand how you can dislike this video when it's do helpful lol thanks man!

@JonMagnificent 4 года назад

Very thorough and helpful. Thank you for making this!

@victorialehman1563 5 лет назад

Thank you so much!! This helped me find my squeaking belt!

@ligma8353 2 месяца назад

Brother this is like a walk through for dummies. Well explained and great camera work. I'm subbing just because of how easy this was to understand. If you could show how to loosen tension/tension the belt that would be great! Some of us are going to spray water and see whats up but have no idea how to get the belt off properly or on to correct tension. Thank you!

@NorthmanEh 5 лет назад

Good day to you ChrisFix. Been a viewer for years and just have a need to let you know that, here at least, Gatorback by Goodyear was bought out by a company called Continental. And they no longer make these belts. I'm crying too (metaphorically) because I was so looking forward to the quick fix. Anyway, you're videos are fantastic, easy to follow and quite informative. Keep it the great work.

@colinnwn 4 года назад

Continental brought the Gatorback design back for some cars under the Continental Elite name brand. Unfortunately they only have the Continental OE belt without the striping for my Acura, and that started squeaking in less than 100 miles.

@joseven3452 3 года назад

Chris I love your videos! Your knowledge is awesome 👏

@kevinward316 2 года назад

Great info here, I just replaced the fan clutch, tension pulley on my 2000 gmc truck and the squeak is still there. Belt and idler pulley next, but hey, the repairs are getting easier ill say. The water on the belt was was well worth the try, helped tons!!

@robertfrake2990 2 года назад

Lol

@kevinward316 2 года назад

@@robertfrake2990 turns out the water pump assembly needed replaced, done and good.

@robertfrake2990 2 года назад

I have a water pump I'll be replacing soon as well.. Good Job!!

@jenningswest79 Год назад

Thank you so much man you saved me paying the mechanic to check it I appreciate the detail and how to do everything I can figure out what it was and it was idle pulley on my car and they save me a bunch of money preciate it keep up the great work

@chrisfix Год назад

Glad I could help

@trollaphobic 9 лет назад

Hey chris good video as always. I have accesory drive system certification, and thought you may wanna know. When they engineer the system they design the idler, tensioner, and belt as one unit. So if you ever replace one you should always replace all three. Also theres a newish type of belt called EPDM. Epdm lasts about 100k miles instead of neoprene which as you said is about 50k. The problem is epdm doesnt crack. So the pulleys will wear the grooves till it bottoms out on the spine of the belt. To check you need a belt wear gauge. These are only one higher end cars and my semis, but expect it to be in passenger cars very soon. But keep up the great work!

@chrisfix 9 лет назад

trollaphobic Thanks for sharing bud! That is great info!

@coldhawk5665 7 лет назад

Very well explained I'll try this tomorrow. Thank you

@pal2442 5 лет назад

This was really well done. I work in TV. I've seen all kinds of things :)

@mattkramer7851 6 лет назад

Thanks for posting this man. The spray trick confirmed that my squeak is coming from the AC belt, not the timing system. Big relief.

@ethixhiggins5059 4 года назад

How do you know if its from.the timing system

@styxfan4022 9 лет назад

Chris. Love all your videos man. Thanks for what you do.

@chrisfix 9 лет назад

Styx Fan Thanks a lot man! I am glad you like them!

@AmmarAbotouk 9 лет назад

Thanks man, I learn a lot from you

@Camm.Lynam7 5 лет назад

Really good content you explain things well and in good detail new subscriber 👍

@jrivera007 2 года назад

Good tips regarding the wear & tear of the belt👍

@oscarferreira1 7 лет назад

I was hoping for a belt change, but it's OK. GREAT VIDEO!

@LibertyFreedom1787 9 лет назад

Great video! Short and sweet and to the point.

@chrisfix 9 лет назад

LibertyFreedom1787 Thanks!

@tinab9702 6 лет назад

Best step by step - thank you~

@darleepeterson4888 5 лет назад

You are the bestest! Thank you for making your video easy and quick to understand. Take Care :)

@ondrayr 5 лет назад

Great troubleshooting video! Thank you so much!

@Dannycruz917 9 лет назад

Can you do a video on how to adjust the parking brake (low brake pedal)? Thanks

@melvinp460 6 лет назад

I just saved 300 bucks just by watching this video. I replaced it myself for 30 bucks vs 300 quote. Thank you so much mate.

@flench1901 9 лет назад

Again , Another nice video . Well done .

@klecoxs2 3 года назад

Great video and very well explained thanks 👍

@yonathanraziel8547 9 лет назад

Funny, my on my BMW started squeaking and i didn't remember any of your videos on how to fix it, and i looked around and they were alright, but you seemed to know how to explain everything and make it clear

@chrisfix 9 лет назад

Yonathan Raziel Thanks a lot man! I am glad I make it clear for you! Here is another belt noise video which should help as well! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AEUe6uKxTv8.html

@yonathanraziel8547 9 лет назад

ChrisFix thnx man really helped out

@rudyv6186 8 лет назад

Hi Chris, first and foremost thank you for the time you take to upload this DIY videos. I was curious to see if possibly you can upload a video on procedures to diagnose and change a power steering pump? Regardless thanks again brother. keep it up! (NOTE: the vehicle I'm fixing is my moms and she drives a 98 Ford Explorer)

@chrisfix 3 года назад

My next video is how to replace a power steering pump!

@prestonpitts640 9 лет назад

Love you're videos man. I could watch them all day. You should make more vids on you're corvet. Maybe a cylinder clean test on the vet?

@chrisfix 9 лет назад

Preston Pitts Thanks man! I like that idea!

@DavidMirandaF 9 лет назад

Nice, and it's a good thing to annotate the numbers (make and model) on the old belt and buy the new one by those numbers, sometimes the car could have some accessory that wasn't there when it came out of the factory (i.e. aftermarket air conditioning, or even an extra alternator, etc), so the belt could be longer (or shorter if an accessory has been taken off for some reason) than the one the manual says it uses. Or if you can take it off take it with you as a sample to buy the new one, the better it is. Other thing is that the old belt coud be slightly longer than the new one, that's because in time, and by the action of temperature variations and the tensioner pulley, it stretches a little bit. So no need to worry if the new belt doesn't look exactly like the old one, just make sure is not too long or too short. Nice video bud! Thumbs up all the way!!

@chrisfix 9 лет назад

David Miranda Great supporting tips/info as usual David! Thanks a lot!

@DavidMirandaF 9 лет назад

No problem, more knowledge is always a good thing to have, we can always learn something new :)

@laurgreen1 5 лет назад

thanks chris for the squeaky belt video

@shepherdscrook777 4 месяца назад

Love your vids! I'm learning so much!! Thank you!

@gmae244 4 года назад

This did help thank you

@justinbond9987 9 лет назад

Good timing because my belt started squeaking today lol.

@chrisfix 9 лет назад

Justin Bond Haha perfect! My ChrisFix senses were tingling!

@funnypranker34 9 лет назад

ChrisFix I got something else: prechecklist video telling you what to do before going to the dreaded smog check

@MrTimmytimtim1 3 года назад

Does the noise become louder and faster when revving it ?

@Joe-vc2cc 8 лет назад

Your videos have helped me out so much thanks!

@chrisfix 8 лет назад

+Jose Padilla Awesome!

@Riku485 7 лет назад

Thanks for the informative videos and on my vehicle model no less. 👍

@MrTeamwayne 9 лет назад

Thanks for the easy diy videos. Your explanation is to the point without extra rambling or shots of pets in the video like other chanels.

@chrisfix 9 лет назад

***** Thanks a lot Wayne! I am grateful for the feedback!

@shaneblandford-scherr3375 9 лет назад

***** Ouch shots fired at Scotty Kilmer lol

@MrTeamwayne 9 лет назад

Shane Blandford-Scherr I like his videos too. This was a you tuber that had a 5 min video and about 2 and a half min was his dogs running around. I like pets but have a limited time for watching videos. That's why I like them to stay on point.

@tharumaravi 6 месяцев назад

Great channel!

@REXONATER70 3 года назад

I thank you so much. I’m good to go outside and figure out my problem.

@CHUNKYCATSFISHING 9 лет назад

Thanks Chris for the great video

@chrisfix 9 лет назад

ELSTAN perez No problem! Glad you liked the video!

@georgiojansen7758 8 лет назад

one tip from amsterdam company who sells a lot of belts for industrial purposes. this man told me to use loctite belt dressing .prolongs 5 times. goedendag

@chrisfix 8 лет назад

+georgio jansen Thanks for sharing!

@georgiojansen7758 8 лет назад

+ChrisFix it's loctite sf 5408 before it was liquid, need only 3 drups now it comes in spray, don't know how to apply cos it eats paint.probably advisable to share with others cos it's a lot of loctite....goedendag

@JMLVC 9 лет назад

Hey all, and Chris thanks for your vids and posts. You have saved me $ a few times now. BTW I wanted to comment that I have had a 2.3,3, & 4L Ranger and they have all squealed and cherped at some point and time.In my current ranger all the bearings were fine and and the belt was straight, yet it still made noise. I have fixed my 4L fx4 with a Goodyear Continental gator back ribbed belt, as soon as it was installed the noise went away. I hope that may help thanks again.

@chrisfix 9 лет назад

JMLVC Thanks a lot bud! I think you will like this video based on your tip: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AEUe6uKxTv8.html

@joelmccoin9727 9 лет назад

Good Video, Very Informative. Thanks Chris

@chrisfix 9 лет назад

joel mccoin Thanks a lot Joel!

@jshshshjdjdjdhhdhd9583 8 лет назад

Thanks a lot dude, love your videos

@chrisfix 8 лет назад

+Jshshsh Jdjdjdhhdhd No problem and awesome!

@jjstotes 2 года назад

Awesome video

@chuckswanson4849 5 лет назад

Thanks for your Video! Great info:)

@coreytoolen5942 9 лет назад

@Samson Truong Did the gauges go out all at once? If not you may have bad stepper motors in the cluster. Been there before.

@kymoninazarenediscypleofyah 2 месяца назад

Thank you for this video bro

@Koolmoedeesimpson 2 года назад

My belt started squeaking and low and behold you have a video for that he’ll yes thank you 🙏

@alexischavez6462 9 лет назад

Do a video on how to wire subs for your next video!

@a.i.f.k.2273 3 года назад

Thank you!!! Very helpful

@Phannty 9 лет назад

Another very helpful video!

@chrisfix 9 лет назад

Insight Phantom Thanks man!

@bbmm4054 Год назад

Great video, Tnx for taking the time to help people with your expertise. I’ve had all my pulleys and belts replaced along with both tensioners when I did my water pump and timing belt in a 2000 4runner with very low mileage. There was nothing else left to replace and I did it all as a prevention otherwise I had no issue with anything but now after a year I’m getting squeaking noise when I start in normal spring weather. Not sure why? Any help wouid be appreciated. Tnx

@zx8401ztv 9 лет назад

Still a great video chris :-D. ive allways liked the way you get to the nub of the problem without rambling on about other things not relivent, you allways add helpfull tips related directly to the problem. Ive watched some tubers and they wander off subject before the jobs done, dam annoying at times, im sure youve watched similar videos lol.

@chrisfix 9 лет назад

zx8401ztv Thanks a lot bud! I really appreciate it!

@slashingbison2503 5 лет назад

Thanks really helped to understand

@sjb49 8 лет назад

I'll try to keep this brief; I did the water-spray test on my relatively new Dayco belt. The squeak went away, so I assumed it was a belt and/or pulley alignment problem and not a pulley bearing problem (my Dodge Ram 1500 2WD is 18 years old). I actually had an old (and I do mean old, possibly 7 or 8 years) Gatorback belt stashed behind the seat, but it wasn't cracked and looked like new so I swapped out the Dayco. Upon starting it up, no squeak! I drove it about 5 or 6 miles, and before the first mile the squeak came back. What's got me stumped is that within the next 2 miles, the squeak went away again, and stayed gone. When I started it up again to go home, no squeak and it again stayed quiet all the way home. I'll be taking it out again tomorrow for a longer drive, so we'll see what happens, but I was just wondering what you think made the squeak go away, come back and then go away again? I greatly appreciate your video; the parts store was hot to sell me a new idler pulley and tensioner along with a new alternator, based on what they thought when they listened to the squeak. If nothing else, I'm not spending money perhaps unnecessarily. Thanks very much.

@chrisfix 8 лет назад

+Steve B The squeak could be a bad bearing in a pulley and it is just starting to show that it is bad. Or the squeak is from the pulley misalignment and it is just bad enough that a gatorback belt doesnt really work all the time. Keep me posted!

@Justme-uz2kf 6 лет назад

This is great information. But how to change the belt? Thanks 👍

@hectorvaldez7139 2 года назад

Thanks ChrisFix U da man!!!

@MrElvisr27 7 лет назад

Awesome tip

@pastytit 8 лет назад

excellent channel

@RobbyJHope 9 лет назад

Sweet. I have a tension problem. I thought so, but I think this confirms this.

@chrisfix 9 лет назад

epohnopulse Awesome! Now figure out if it is a worn/stretched belt or a bad idler pulley!

@kaleidefries5645 6 месяцев назад

Goddammit Chris you did it again. Thank you I really needed this video.

@wtf1231122 9 лет назад

Love the videos man

@chrisfix 9 лет назад

Bryan Lozano Thanks a lot!

@ruthspillman546 2 года назад

Great info!!! I just got a 2011 Jeep Liberty. Has a little squeak in belt. Tks

@W3BZSL1NG3R 2 года назад

Next time, You should of showed that u changed the Idler pulley n belt, Then started it to show it was fixed... Keep u the great work on the channel brother. Cya, W3BZ 🤟😁👍

@edburns8637 9 лет назад

Very interesting, thanks.

@chrisfix 9 лет назад

Ed Burns No problem Ed!

@BrailleScreen 9 лет назад

Great video

@chrisfix 9 лет назад

BL Patrick/smoke alarm person 9000 Thanks a lot man!

@jsnxng7578 4 года назад

You saved me $300 thanks!

@chrisfix 4 года назад

That's awesome!

@seanearly54321 Год назад

pretty good video

@geojor 9 лет назад

thanks chris...

@ritorubio9378 8 лет назад

I want someone to talk to me the way Chrisfix talks to his subs 😪

@NotME535 9 лет назад

Haven't you done this before? I think you have. Good vid by the way.

@Phannty 9 лет назад

RU-vid took it down because of "spam"

@chrisfix 9 лет назад

João Mendes Yes, I have done this exact video actually. RU-vid took it down because they said it was "spam" lol.

@NotME535 9 лет назад

ChrisFix That makes no sense at all! It's a helpfull video anyway.

@papitosabe 9 лет назад

ChrisFix youtube someone with a video that wasn't getting many hits probably used a few different accts to label it spam 3 times so that youtube would pull it. Its automated so you need to appeal and they'll get it back on for you so don't have to start over. Just explain/show that all these are 100% your videos.

@danielpadgett4245 5 лет назад

I just watched your other video of u replacing that dayco belt with the gator back belt

@joelouieOWNZ 9 лет назад

Hey Chris, I love your videos and so helpful and informative. Is there any way I can send you a short 30 second video about a noise my car makes? And give me some advice? Thanks!

@chrisfix 9 лет назад

Jose Ortega Yes, you can send it to me via instagram, facebook, twitter, RU-vid PM.

@HighparkBristol 8 лет назад

Hi Chris... great vids. I followed ur instructions... in my case the tensioner is in constant oscillation (not good)... so something needs fixing! when water dropped... oscillation stops! have a look... what do you think? is it the belt? clutch pulley? other? thanks