How to fix a stuck sync button on a Xbox One controller ! BONUS : Change of bumpers and triggers

Подписаться 2,5 тыс.

Просмотров 56 тыс.

50% 1

Let's fix the Xbox One Controller #4 of Joblot #2 that has a stuck sync button or a broken sync button if you prefer. This video is perfect for you is you want to know why your sync button is stuck and what you can do to fix it. As a bonus, we also needed to change the bumpers and the triggers on this controller. I hope you enjoy ! If it's the case, please leave a sub so we can make more usefull content like this.
How to fix a broken trigger on your Xbox One controller : • How to fix broken/unre...
Here is a link to the unboxing and testing video : • Unboxing and testing a...
How to open your Xbox One controller : • How to open your Xbox ...
How to fully test your Xbox One controller : • [3 WAYS !]How to fully...
Here is a link to the tools I used :
amzn.to/3jPmFwP
Soldering iron :
amzn.to/3dj8bm9
Need a new Xbox One controller ? :
amzn.to/3rkQSb9
You can also find a lot more on our website (like thumbstick, battery cover and replacement parts for RB/LB/RT/LT). Take the time to take a look :
repairresell.wixsite.com/webs...
As an Amazon Associate, I might earn a small commission (depending on your location) from any qualifying purchases that you made after clicking on any amazon link above. This help to keep to the channel alive and is a way to support us without increasing the cost of what you are buying. :)
Follow us on Facebook : / repair-resell-10626918...
If you enjoy this video, don't hesitate to make a donation so we can buy more stuff and try to fix more complex items : paypal.me/MMorin333
If you want to donate broken video games, consoles or controllers to this channel, contact us : RepairAndResell2020@gmail.com
We will refund shipping if we can repare your items and sell them back for a profit ! :)
IGNORE THIS :
how to change triggers on xbox one controller
how to fix broken sync button on xbox one controller
how to fix loose sync button on xbox one controller
how to fix stuck sync button on Xbox one controller
stuck sync button xbox one
sync button on xbox one controller not working

Опубликовано:

24 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@akeylawhite9217 Год назад

THANK YOU! Could not sort out how that sync button was suppose to go back in until you pointed out the tiny slot for it.!

@LewisWells-1 2 года назад

If you've found this video because you've took your controller apart and can't work out the sync button orientation, click here to jump to the moment you need: 17:14. Thanks for making this video.

@equimosis1 2 года назад

You're a life saver, my guy. Thank you!

@RepairResell Год назад

I am glad this could help ! 🙂

@marcus5399 10 месяцев назад

thx so much bro

@PlamereDoesntExist 6 месяцев назад

legend

@trx.ashton2385 2 года назад

Wow I would love if you showed me how to take the front plate off😐

@RepairResell 2 года назад

As I said, there is a link in the description on how to open your controller ;)

@trx.ashton2385 2 года назад

@@RepairResell bro I don’t watch to watch 2 videos to learn how to fix a button

@Mayru-lm7og 2 года назад

@@trx.ashton2385 then stop crying and buy yourself another controller

@bozobaca3848 2 года назад

@@trx.ashton2385 bro you gotta relax. There is a hidden screw where the batter pack goes. It is behind the sticker directly in the middle. Now quit your bitching and leave this poor youtuber alone.

@trx.ashton2385 2 года назад

@@Mayru-lm7og why are you even here? Just buy yourself another controller😂

@MrsGreycious 2 года назад

Needed the orientation of the sync button and found it here, thank you!

@CyberCross222 2 года назад

super helpful! My controller has a bit different of a plate that goes over the Xbox Light button and the sync button, it wraps over the Xbox Light button so it's a lot harder to remove, but when I was doing a control pad fix before, the sync button had just fallen out after removing the plate cuz I had to remove the top circuit board (or the one underneath the 1st board when you open the controller). Couldn't figure out how to get it in, had been trying to hold it in place while attaching the plate, didnt know there was a little clasp area near the Xbox Light button to hold it in while attaching the plate until 3 hours later when I found this video! Many many thanks!

@unknown4mat584 2 года назад

dude you rule i have been trying for days on how to get the sync ccbutton in thanks a bunch....i subbed because i fix and resell too

@RepairResell 2 года назад

That's really nice ! Thanks a lot !

@lndrapz4071 3 года назад

Amazing info. Was able to fix my friends controller

@bozobaca3848 2 года назад

Do you have any solutions for a dislocated sync button? I opened up my controller because it had broken sync button and to my surprise the button was just floating around in the controller. Do you know how to put it back into the correct place?

@RepairResell 2 года назад

You can always try to resolder it but you might need to use jumper wires

@garabedkalajian6226 2 года назад

I had the same thing

@trippintemptress9632 2 года назад

@@RepairResell it's not metal. It's a plastic piece.

@dulitharajapakshe 6 месяцев назад

Adoh Thankyou bn haminila hitiye methana

@trippintemptress9632 2 года назад

On my controller, the plastic piece that clicks the button is separate from the bumper bar. I can't figure out how it's supposed to sit against the bumper bar and the plastic piece that goes around the power button.

@RepairResell 2 года назад

I am not sure what you are talking about but there is a little hole where the sync button can slide in on the front of the controller near the xbox button. The front plate of the controller need to be remove in order to do so as well as the plastic around on top/around the xbox button

@jimiconcarne1 2 года назад

Any idea where to get a replacement sync button to solder on to the board?

@George-wk7fm Год назад

Safest to get off an old controller Or I’m told that mouser electronics TL3340AF160QG tactile switch is the correct part- it sure looks like the correct switch

@gleez7741 2 года назад

I'm trying to connect my controller on my phone but it's shows 2 red dots under the button to pair with this problem it doesn't show one the Bluetooth list to pair

@yadira132 3 года назад

Yo please help, I opened mine up and evrything, unjammed the button but when I put the button up it just falls back down but it doesnt jam. What should i do

@RepairResell 3 года назад

If it fall back down, it's because the button underneath is broken or not correctly in place.

@kenwoodx2 Год назад

I'm confused by the difficulty in accessing the sync button - if this is the 4th controller being fixed, op should know by now how it all comes apart. When I take apart a controller, I'm removing the sync button cover and bumpers before ever taking apart the motherboard. The cover can be removed easily with your fingers (tweezers not needed), and removing the bumpers works best with the triggers pulled down. The pieces simply snap into place.

@nuclearreverie5146 3 месяца назад

My sync button clicks, but it doesn’t work like it doesn’t flash when I hold it down. It looks fine when I opened it up

@maxduerr2578 3 года назад

hi my button clicks but doesnt work any ideas why/ how to fix?

@RepairResell 3 года назад

The button might be broken and need to be replace. Also, make sure all the pins are solder to the board and that there is no short between pins. You could also try to clean it with IPA but you will need to be lucky for this to fix your problem.

@shellshockhkmk7816 5 месяцев назад

My controller came out of the box with a stuck Sync button after i swapped it for one i just got that already had stick drift.

@inthemoment6720 2 года назад

Thankyou

@Jakecjohnson13 3 года назад

What about the little black square piece by the motherboard? I don’t know where to put it.

@RepairResell 3 года назад

Are you talking about the audio jack ?

@Jakecjohnson13 3 года назад

@@RepairResell no it’s a black cube, and it a little bit of metal. It’s in the middle

@RepairResell 3 года назад

Can you send us some clear pictures at RepairAndResell2020@gmail.com ?

@alanjagroop1282 3 года назад

Also when the battery got remain in the controller and the battery spoil. How to repair it. Back power battery

@RepairResell 3 года назад

To remove battery acid, you can try to use white vinegar to remove it. Vinegar must stay on the battery acid for a couple of minute in order to remove it. After that remove the most vinegar you can and clean it an other time using isopropyl alcool (IPA). Any part that is damage beyond repair will need to be replace.

@naiasjohnson1562 3 года назад

Do you fix controllers, if so can I send mines in they need fixing

@RepairResell 3 года назад

I fix controller but usually, it's better to look for local repair shop because of shipping fee. You can still contact us at RepairAndResell2020@gmail.com with your details.

@katiemwah 2 года назад

im trying to sync my controler and xbox but when i press the sync button on the xbox it doesnt do anything

@RepairResell 2 года назад

This video could help. A solder joint might be broken

@lamebro2774 Год назад

How do I connect the mic back

@RepairResell Год назад

The mic is not "connected". It simply needs to be in contact with it's pad.

@johnplayz2789 3 года назад

What about the console can you help me?

@RepairResell 3 года назад

The sync button from your console ? Unfortunately, I didn't have the opportunity to work on such issue. You can always try to plug your controller with a wire to connect it.

@cmateusmoraes 3 года назад

Pessoal, no meu caso usei a chave de fenda para empurrar um pouco o suporte do botão para cima e voltou a funcionar.

@RepairResell 3 года назад

Obrigado pelo teu conselho For users that don't speak portuguese, here is a translation : « Guys, in my case I used the screwdriver to push the button holder up a little and it went back to work. » It might indeed be a way to fix it but the problem might come back. Soldering will solve the problem for the long terme.

@javitorres9225 2 года назад

The sync button how does it go back on??

@RepairResell Год назад

You slide it in place as shown in the video 🙂

@noah_plazy794 2 года назад

Bro we don’t have that stuff

@Puppy_Puppington 2 года назад

I’m pissed because my sync button is permanently jammed pressing down and I can’t even use it by connecting it with my USB cable. The freaking PS4 controller never did this to me neither has any other controller in my entire life. Xbox really dropped the ball in the newer gen crap. I just wanted to make it stop syncing without having to open it or risk breaking more….

@RepairResell Год назад

This will be hard without opening the controller :/

@alanarias6390 2 года назад

umm I think I broke my controller cause when removing the wire from the circuit board I ripped the bottom instead of detaching the top

@alanarias6390 2 года назад

4:20

@RepairResell 2 года назад

If I make no mistake, you are talking about the antenna ? This could make the controller connection difficult wirelessly but it should still work fine if it's connected to your Xbox.

@pullilili5845 2 года назад

@@RepairResell my sync button is jammed and i dont have the tools to fix it how do i fix it

@ethangreen7382 3 года назад

Do you just rip off the front

@RepairResell 3 года назад

What do you mean ?

@robertbartlett9859 2 года назад

@@RepairResell the front of the controller where you just took it off in the beggining of the video

@PUGGERINO0628 3 года назад

My xbox controller came with a broken sync button, smh

@RepairResell 3 года назад

New, out of the box ? If it's the case, you should return it.

@evildeedz6905 3 года назад

Same problem got from Amazon. I opened it up and it fell to bits

@thatonesuperrandomguy8725 Год назад

My controller has the same problem If i send you my controller will you fix it ill pay ofc

@RepairResell Год назад

We are not doing repair for custommer unfortunately but if you don't know what to do with your broken controller, you can always donate it to us. 🙂

@thatonesuperrandomguy8725 Год назад

@@RepairReselloh its fine now i just traded it in for a new one at gamestop like a 2 months ago

@RepairResell Год назад

Oh that's nice. At least, you find a solution. :)

@alanjagroop1282 3 года назад

How to make the sync button turn into a bluetooth button. Mod

@RepairResell 3 года назад

What do you mean ? The sync button is already use for bluethooth connection : support.xbox.com/en-US/help/hardware-network/accessories/connect-and-troubleshoot-xbox-one-bluetooth-issues

@alanjagroop1282 3 года назад

@@RepairResell To work on any device. The orignal 1st model doesnt have bluetooth built in to work on any other bluetooth device. It only work by wired. The sync button is only for the xbox console. Xbox 360 had the same button but cannot connect to any bluetooth device without a wired connection. I want it to work easy. This model 1708 have the same problem. Want it to be like the second model controller that came before the series x controller 2021. 2nd model

@RepairResell 3 года назад

@@alanjagroop1282 1708 controller have bluethooth built in. It should work on any compatible device. For the 1st model of Xbox One controller, I am aware that they don't have bluethooth but I have no idea how to add it to the controller unfortunately :(

@npcdecoy9572 3 года назад

Anyone got help cuz my stuff is loose

@RepairResell 3 года назад

I am trying to respond to every comment :)

@itsdesean 3 года назад

@@RepairResell luckily my controller is connected to my Xbox already but is there anything that would cause them to just disconnect?

@RepairResell 3 года назад

@@itsdesean Good question. If it happens, you can always reconnect it with a USB cable ?

@itsdesean 3 года назад

@@RepairResell and I have a xbox elite series 2 so it's a little different

@RepairResell 3 года назад

@@itsdesean for the sync button, it should be very similar

@thomascardinal4584 3 года назад

#giveaway jai vue ton post sur kijiji!

@RepairResell 3 года назад

Si tu veux obtenir ta participation pour le giveaway, tu dois écrire ton commentaire ici : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BGKwLaXgkuc.html Sinon, le « comment randomizer » que j'utilise ne détectera pas ton commentaire. ;)