Тёмный

How To Fix a Transmission Whining Noise For $50 ~ MK4 GTI 6sp Manual 

HumbleMechanic
Подписаться 922 тыс.
Просмотров 292 тыс.
50% 1

Transmission noise when decelerating. This GTI had a severe transmission whining noise when decelerating. In this video we inspect the transmission fluid, first. Then install a washer to see if that transmission noise when decelerating can be fixed. We will also peform proper transmission fluid change. Im actually surprised how well this fixed the noisy transmission
Washer ~ bit.ly/3S29TMz
Cover ~ bit.ly/3dsKw7o
Snap Ring ~ bit.ly/3DH3WjI
Fluid ~ amzn.to/3DH6IFE
MoS2 ~ amzn.to/3BTw3Li
Ceretec ~ amzn.to/3QThpI8
Socket for Trans Plug ~ bit.ly/3S2cKFh
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...
disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

Авто/Мото

Опубликовано:

 

20 сен 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 343   
@rickharris5485
@rickharris5485 Год назад
Nothing feels better than making the correct diagnosis and it's even better when it turns out to be the cheaper of the possible fixes. Great video as always.
@KRAMPUS_G60_16V
@KRAMPUS_G60_16V Год назад
Sir... You and your videos are pure gold.
@qtqsochoa
@qtqsochoa Год назад
Nah, platinum plus.
@lightspeed4173
@lightspeed4173 Год назад
Agreed
@nicecool26
@nicecool26 Год назад
Yet again humble mechanic You're the guy we need!
@_real_ask
@_real_ask Год назад
Thank you, Charles. Another excellent and informative video. I appreciate how you always take the time to explain how things work, why they're not, and how to fix them. I always learn a lot from you.
@johnbeckman9200
@johnbeckman9200 9 месяцев назад
Dude your video saved the day again. Over the past few years ive watched your content to help resolve some unfamiliar problems. I recently traded a car for a gti with some issues to have a project for my younger brother. Biggest issue was the horrendous noise from the transmission. I had to get a slightly thicker washer from the one in the video but i wouldnt have thought to try this if i hadn't heard you recreate the noise and then make it disappear. Thankyou!
@Asymptote
@Asymptote Год назад
I don’t even own a r32 but i just enjoy watching someone very knowledgeable in their trade do their work
@robc5955
@robc5955 Год назад
It amazes me what I don’t know, what a fab fix. Car sounds and looks amazing for 200k+
@anthonynotarianni7215
@anthonynotarianni7215 Год назад
Perfect timing for this video my friend! I'll be inspecting this on my MK4 GLI I just purchased and drove home today. It has an identical noise to the noise in the video. Also, I had to replace the driver's side wheel bearing and knuckle. Someone was there before and the knuckle had chunks missing from a torch. Also it didn't have a snap ring! And the hub fell off just like this one did! Thanks for the information and quality video!
@JJ-mg1yx
@JJ-mg1yx Год назад
Charles's videos have always been educational, where he wants you to learn how to do something for yourself.
@brendanPREGO
@brendanPREGO Год назад
oh my god I have this issue on my 1.8t GLI, cant thank you enough for the content you put out.
@thegeckoguy2792
@thegeckoguy2792 Год назад
I swapped this transmission into my 2008 mk5 rabbit and have the same issue. This has been driving me insane. Thank youuuuu!
@retepcooper1756
@retepcooper1756 Год назад
I have a 1.9 Tdi PD100 and its started to get some gear groaning noise lately, so I'm defintely going to give this a try. I gave it the transmission fluid, long-life, change when I got it plus the LiquiMoly aditive. Really good video, as ever, many thanks from the UK.
@petermolnar8667
@petermolnar8667 Год назад
Which oil did you use?
@bearddevil
@bearddevil Год назад
Love that JB weld fix on the oil pan. That stuff does everything.
@chriskelvin248
@chriskelvin248 Год назад
Hmh! My ‘03 GTI VR6 did the same thing. I drove with the windows down often (because VR6) and would notice the same noise under the same circumstances, reflecting back at me off the jersey barrier on the parkway. Besides that noise, everything on the car (including the original clutch) behaved up until 297k miles when the original timing chain system gave up the ghost. But now I know what that noise was! Thank you Charles.
@TheTrex600ESP
@TheTrex600ESP Год назад
Just love when things come together :)
@K03sport
@K03sport Год назад
Thanks Charles for really dialing in that transmission. may, I really miss my '04 Mk4 GTI 1.8t 5M...15 years of fun times and that was on the stock tune. I almost thought it was going to be a poly dogbone bushinging the owner put in...but I was wrong
@droppedpasta
@droppedpasta Год назад
Did this on my ‘04 VR6 back in 2016. My 3rd gear growl was crazy before, and I couldn’t believe the slop the input shaft had. This and a better dogbone were the best things I did to that car.
@WhiteG60
@WhiteG60 Год назад
Manual mk4, the dog bone bushings were the BEST mod you can do. Made the car feel so much better.
@hiemabedrog
@hiemabedrog Год назад
I was just gonna ask the dumb question of the filler plug, but as I watched, you mentioned it like the pro you are!
@ivoxui2448
@ivoxui2448 Год назад
Wow what a perfect timing. I just noticed it on my civic. Will try what I learn here!
@jm71681
@jm71681 Год назад
My first 20th made this noise OFF THE LOT in 2003. My second 20th with nearly a quarter-million on the clock makes it a LOT louder. Can't wait to take care of this, one less disconcerting old car sound 👍
@ALMX5DP
@ALMX5DP Год назад
Nice, love when concerning things or sounds are easily remedied by cheap repairs.
@tomthompson7400
@tomthompson7400 Год назад
Its nice when something cheap and handy just works ,,, great job.
@pojay52
@pojay52 Год назад
"Pumpalator" love it! Great video, thanks.
@crushdamushrooms
@crushdamushrooms Год назад
Man I wish you made this video 3 months ago lol, I had the same problem with my 2004 GTI VR6 in 3rd gear, scared the hell out of me
@living9377
@living9377 11 месяцев назад
Awesome fix…$50 fix!!!! Amazeballs! 👍💯✌️🔥👏🏽👑
@ramirogarza4416
@ramirogarza4416 Год назад
i have a 04 GLI 24v 6spd with the same exact noise, thank you for this video!
@gearhead-quarters30
@gearhead-quarters30 Год назад
This is a big one. I feel like every mk4 I've driven needed this....they were all well over 200k lol
@jemmace2586
@jemmace2586 Год назад
Great video. Very informative, about taking the drain plug out before the refill plug, you'd do that first... At a workshop, because you'd have the tap and Heli coils at hand to correct the overtightened drain plug.
@dartsi2432
@dartsi2432 Год назад
Same issue is present on similar vintage Seat Leons (and presumably all other cars that use the same powertrain) - I installed the same shim on my own Leon years ago 👌
@karlo134652
@karlo134652 Год назад
Thank God your video stumbled on my feed. I have the same problem on my Evo X when i drive on 1st and 2nd gear.
@boysetsfire3966
@boysetsfire3966 Год назад
I am a car mechanic and this is the only guy that i like to watch and i never cringe.Not because he is good in what he does and there is no bs but because he is an awesome dude.
@HumbleMechanic
@HumbleMechanic Год назад
Thanks!!!
@Jekylnhyde55
@Jekylnhyde55 Год назад
I put the shim kit in the Suzuka Grey R32 a couple years back. It fixed the decel whine. 👍
@SuperBad850
@SuperBad850 Год назад
Awesome fix, Charles.
@tactical_snuggy9686
@tactical_snuggy9686 Год назад
Had the same issue on my 04 Beetle Turbo S. This fix definitely works, atleast it did for me.
@jeanfrancoismenard705
@jeanfrancoismenard705 Год назад
About the ceratech in the transmission it's working very, very good. I do a stg3 clutch and a single mass flywheel on my R mk6. After that i have gear latch noise on idle. Its normal nothing to buff the pulse of the engine. It sound little bit like a diesel. I change my trans oil and add a Ceratech and it fix like 75% of the noise. Good stuff !
@diazandhisdaily801
@diazandhisdaily801 Год назад
Constantly Refreshing Squad 💨💨💨
@CmdrHahn
@CmdrHahn Месяц назад
I’ll definitely be doing this after my finals this term
@randallmunson9909
@randallmunson9909 Год назад
Thanx for the video and view of what the components look like that I'm missing. Good day ☺️
@George-zq2sk
@George-zq2sk Год назад
as always amazing content Charles! if you had the choice to put in a trans, would you go 02J VR6 or 02M VR6? besides the obvious difference with 6th and the larger disc, what would you choose?
@aldeacristian4582
@aldeacristian4582 Год назад
Great video, as always!
@rashaadhartley2145
@rashaadhartley2145 Год назад
loving the content, my liqui moly products are being shipped to me as we speak!!!
@harrylundstrom1887
@harrylundstrom1887 Год назад
😂 having done this less than a year ago I knew what was coming just based on the title of the video. Naturally I repaired it after listening to the noise for years and did nothing until the clutch no longer worked properly.. I still had quite a lot of play even with the shim (no noise though) but I guess that isn't a surprise after 470k km..
@cordellrice2563
@cordellrice2563 Год назад
It was nice meeting you at Dubs…
@philipsalvagione4606
@philipsalvagione4606 Год назад
Another Great video Charles! Informative as always. Thanks for all the information you make available to all us car enthusiasts. Question...where can one fine a proper VW reference guide for installation procedures and torque SPECS? Its very time consuming trying to figure out the proper specs from all the varying information online.
@bwarn1975
@bwarn1975 Год назад
Charles . I have a similar problem on my 2012 MK6 Sportwagen TDI, this happen after i mistakenly put in a Single mass LUK HD Clutch. It is mainly noticeable in 1-2nd and on the freeway 5th and 6th are chattering. i have already bought this kit a while ago but I haven't made the time to install it. I have put on 40k since the new clutch FYI and yes my Syncro's are still fine! Thanks enjoy all your content! Pic is my 97 Golf I bought new and now@276k Go ABA!!
@henryrolt3747
@henryrolt3747 Год назад
Not an expert on this specific transmission or transmissions in general. BUT as I understand it, onset of chattering and rattling in a manual transmission immediately after swapping to a SMF from a DMF is probably gear rollover noise. Torsional vibrations from the engine reach the transmission and cause unloaded gears to rattle against eachother. Tends to be most noticeable when the transmission is hot as cold thick oil damps the noise better.
@astonrichardson4309
@astonrichardson4309 Год назад
I did this fix on a TT once, add some shims in. It does work.
@guillermogonzalezquintero3035
Great video keep it up as always
@Michaeltje89
@Michaeltje89 Год назад
as a Golf Mk5 1.6 FSI (eu) 6speed owner, thank you in advance ;)
@kristianhermann5971
@kristianhermann5971 Год назад
Interesting to hear what too much end-play sounds like (thanks!) - surprised you weren't hearing a thud on/off throttle or getting vibration - thrust load from the helical gears will force that shaft back-forth under throttle/coast - my Kia made the SAME noise under deceleration (like marbles rattling in a jar) at >3,000 rpm but worn needle bearing races were the culprit (I rebuilt)
@milkonbean
@milkonbean Год назад
My 6 speed Seat Cupra had the common fault of the selector fork for 1st and 2nd snapping off. I was collecting my son and partner from the hospital, lost reverse as the fork drops down and blocks it. That was fun driving home with only 3rd to 6th only. Easy fix though, drill the rivet from the fork and selector then nut and bolt. I sold the car and its still going strong
@wackey3455
@wackey3455 Год назад
great diagnostic work very good work
@patkelly7999
@patkelly7999 Год назад
Fantastico, great tip Charles, Thank You💪👌👍🙂
@Peter_Riis_DK
@Peter_Riis_DK Год назад
I do believe that the tire and rim in unison makes a wheel. Ey? 🤨 Good vid. Learned a thing or two again today. Eg. a D-cell is not a cell but probably means deceleration. 👍
@raiNofchAosFPS
@raiNofchAosFPS Год назад
send my mk5 gti in for timing and lack of boost and he sent the car home with a driver and the car simply came to a stop it turns over but fires out the exhaust thou, so may not to bad,. will be taking look into soon and he will be covering any damages. second time a mechanic has done this to my car and not even me! sad to say but i think it will be the last time and on to the next! look at a rs3. dream car. love the content!
@JS-fd7se
@JS-fd7se Год назад
Very cool, thank you for this.
@longgoneg60
@longgoneg60 Год назад
O2M/Q are so simple to rebuild as well! I have one with over 200k on it (shift fork upgrade, MFactory LSD install) and new bearings. Thing is an absolute unit!! Great Transmissions imo.
@jamesbell1149
@jamesbell1149 Год назад
I have 267k miles on mine. I haven’t done any services to it either(I’m changing the fluid soon.)
@pnoyhf
@pnoyhf Год назад
Anyone have an idea if this shim would work in the 02Q?
@kevinmallon8692
@kevinmallon8692 Год назад
@@pnoyhf did you get a reply? Id like to know as well
@snoopy5736
@snoopy5736 Год назад
Thank you sensei, awesome video
@kristianhermann5971
@kristianhermann5971 Год назад
Well that's a convenient plug for the input shaft!
@gplusgplus2286
@gplusgplus2286 Год назад
Bloody brilliant!
@TopiasSalakka
@TopiasSalakka Год назад
A dude i know on Facebook fixed an old Opel manual transmission with RVS treatment. Basically it had completely thrashed synchros, it wouldn't go into gear without proper revmatching, sometimes it would come out of gear too. He was already looking for a used good transmission, he thought he'd give the stuff a shot, and after driving it for a while, it was completely fine. Even let friends and family drive it, nobody could tell that the gearbox was at one point destined to the junkyard. He drove it for like 60k miles until he got rid of the car, and it was still fine when he sold it.
@TopiasSalakka
@TopiasSalakka Год назад
Well, maybe "fix" isn't the right word, more like "bought more life to an old clunker". Still, pretty amazing that just adding magnesium silicate can do that. He did try just a fluid change before adding the treatment, which did basically nothing.
@curtisss
@curtisss Год назад
I cringed when I see you didn't crack the fill plug first and I'm glad I waited til the end to comment because you did make the correction for those in the DIY space. Love your videos. Very informative, thankyou!
@EmperorTerran
@EmperorTerran Год назад
did not expect to watch entire video.. but here I am
@renerobes30
@renerobes30 Год назад
Very elegant and effective repair car looks good for 200k miles.
@twowheels87
@twowheels87 Год назад
Great video. I am having the exact same sound in my MK5 jetta TDI 5 Spd. However I was also experiencing what seemed to be clutch slipping. After letting the car cool down the clutch seem okay but I don’t want to push it. The transmission still makes bad sound on decelerating and in reverse. I’m going to attempt this same repair, hopefully it works and I don’t need a new clutch.
@sheerwillsurvival2064
@sheerwillsurvival2064 Год назад
Great video 👊🏻
@flyinghigh8487
@flyinghigh8487 Год назад
What a great video
@danjordan1979
@danjordan1979 Год назад
If you and Rainman Ray had a weird lovechild (somehow!) It would be able to fix anything known to mankind. Plus it would have an awesome beard. Love your videos, everything is so calm and easily explained for a novice like me. Thank you. 👍👍
@Stanjara
@Stanjara Год назад
Tuldudulduuuu
@slakka6495
@slakka6495 Год назад
Add Sara N Tuned
@StevenAndrews
@StevenAndrews Год назад
DIY guy here, I always pull the fill plugs first, that way i know to go get a spare because it's probably gonna get gacked in the removal process
@wellingbadboy
@wellingbadboy Год назад
Awesome....not all heroes wear capes!
@Mellchior
@Mellchior Год назад
Another great video. What are the chances that this washer is already present in an early build 2006 MKV GTI? I get the typical gear noise ever since I went to a single-mass flywheel. I'm wondering if the addition of this washer would quiet things down.
@dalebabbitt6185
@dalebabbitt6185 Год назад
Nice video!! Thank you!!!!
@-Dash-
@-Dash- Год назад
Good info thanks
@re_stricted
@re_stricted 5 месяцев назад
This video may have saved me what I thought was a gearbox rebuild... I've ordered the parts lets see if this fixes it
@re_stricted
@re_stricted 5 месяцев назад
It worked
@demelitia
@demelitia Год назад
Does adding the friction modifiers have any negative effect on the way the synchros work? Or for that matter any positive effect on the quality of shift and gear engagement?
@nickchesshir6994
@nickchesshir6994 Год назад
Great video Curious if you have seen a constant whine in a 6spd auto transmission and what normally causes it. I’ve heard it’s the pump going bad over time but don’t know much about transmissions
@gmupps
@gmupps Год назад
That's awesome! Does this apply to the 02Q as well? And where did you get that awesome clip on fill hose?
@kokoeteukpong8211
@kokoeteukpong8211 Год назад
Wonderful
@algerienoranais6908
@algerienoranais6908 Год назад
Ur a genius man
@naughtiusmaximus830
@naughtiusmaximus830 Год назад
In Hondas a loose input shaft will damage 3rd gear. Nice to know you can change this on Audis without pulling the gearbox.
@blackbullet9297
@blackbullet9297 Год назад
Super super videos,like always. I have a question,can you swap a 1.8 20V head on a 2.0 AZJ block on a MK4 golf?
@SuperTAmbro
@SuperTAmbro Год назад
Great video, amazing what a bit of concentrated effort does. Do you have any advice on a fault number 1192 3 on a 2007 T5 7H/7J Transporter BPC 2.5l TDI-PI with a 09K transmission. Scan came back with Torque converter lock-up clutch. (mechanical malfunction intermittent). Any suggestions on how to rectify please? Cheers,Tony from down under.
@bozzy-101
@bozzy-101 Год назад
I had this problem on a MK5 Golf GTI, although it didn't manifest itself in noise. Instead, I could feel the clutch pedal pulsing due to the play in the input shaft. The clutch pedal also used to get stuck sometimes. I fitted the shim on my driveway and the problem went away.
@jamesdeserio6481
@jamesdeserio6481 Год назад
Love the JB weld blob on the oil pan. haha. Assume at one point they heard the "STOP!" Flash on the dash... Not speaking from personal experience....
@markhyperst
@markhyperst Год назад
Hi Charles, was the outside of the bearing also rotating and moving when you were measuring the play on the shaft?
@DesolationTech
@DesolationTech Год назад
love the video charles!...quick question i have a gti and i have replaced the gearbox oil at 160k on my AUM mk4 GTI would you say that is too late? or better late then never? as they say "lifelong is 100k" i read?
@ikonds6826
@ikonds6826 Год назад
My guy engaged colossal brain mode
@TheKiltedYaksman1
@TheKiltedYaksman1 Год назад
If you pull the drain, but can't get the fill plug out, it's only a few extra minutes to remove the shift tower and fill from the top.
@chrstphrr
@chrstphrr Год назад
I know the 02J 5 speed isn't exactly the same animal as the 02M, but as a DIYer: I have always removed the fill plug to get the dribble out, but have also always filled from the topside - from the selector rod hole with the rod + top housing removed, cleaning the case/housing on top beforehand. Edit: I know the 02M/02Q and other dual output shaft style transmissions also use that same top housing + selector rod design, so that's the "alternate" way to deal with filling the transmission if the fill plug can't be removed. And, yeah, when I fill with the selector rod out, I'm technically overfilling. Not that much more fluid, and with the ol' 02J/mk4 combo I've run, not terrible to have a wee bit more fluid that might get over to the isolated 5th gear set.
@petermolnar8667
@petermolnar8667 Год назад
We had it filled with one side of the car lifted so that it would take the correct amount without any dribbling back out
@kevinmallon8692
@kevinmallon8692 Год назад
My end cap was weeping for awhile. I was reluctant to replace it myself and i didnt have a seal driver. I seen a hack on youtube use a block of wood! Ended up at the shop tranny fluid replaced 200$ and the end cap 1 hr labour 115. Oh well 😄👍
@gordoman9145
@gordoman9145 Год назад
Awesome fix!!!😮… I need help 😭😭😭…question-I have an 02’ beetle 1.8t manual transmission. In 3rd gear and pedal floored, at 3k rpm’s it coughs/pops/hesitates . After like 5 seconds it pushes through runs great.in neutral floored it revs great.bad turbo? Ignition?idk what it can be. Thank you for any help
@f2tzoomzoom
@f2tzoomzoom Год назад
wheel and tire module..... noted!
@Aleks_Mechanics
@Aleks_Mechanics Год назад
notification squad!🔥🔥🔥
@bambambam21
@bambambam21 Год назад
Hello! Really nice video. I have a 2004 Audi a4 b6 1.8T BEX engine with GEA 6spd gearbox. At over 80kmph I get a high pitch whining noise. DId you encounter this in the past? Can it be the synchros or some bearing? Thank you!
@musamlangeni3140
@musamlangeni3140 Год назад
I did the same as the car owner. Changed the oil and the grinding didn't stop.😆😆😆
@pearlprints5019
@pearlprints5019 Год назад
Charles hope your good mate. Question, is the 6 speed and 5 speed gear box have the same spline shaft on the trans. Cz wanted to install a 6 speed gearbox on my 5 speed
@alexander-malafeev
@alexander-malafeev Год назад
Great video! I have a similar noise on mtx75 transmission. Perhaps you have an idea how it can be fixed?
@wilsonleonlaw77
@wilsonleonlaw77 Год назад
Yep got this problem on my 2011 sportwagen tdi 6 speed
@HanifEFIMechanical
@HanifEFIMechanical Год назад
Good 👍🏼
@Saltyoldguy-
@Saltyoldguy- Год назад
I did this on my GTI years ago. Pretty common fix actually.
@markmiranpt
@markmiranpt Год назад
Why is it so hard to find a vw mechanic with your smarts? Oh well do it myself... Nice video.
@markmiranpt
@markmiranpt Год назад
@Humble Mechanic 【𝟒𝟒𝟑 】𝟓𝟖𝟒-𝟔𝟒𝟎𝟏 yes I am but I'm located in Australia
Далее
Does Lucas Transmission Fix Work?  Let's find out!
10:54
How To Replace a PRESS IN Wheel Bearing ~ On The Car
30:32
Can Changing your Transmission Fluid Cause Damage?
10:58
Humming Noise Diagnosis (Bad Rear Differential)
12:56
7 Causes of noisy transmission
8:24
Просмотров 94 тыс.
4 Symptoms Of Low Transmission Fluid
3:50
Просмотров 3,1 млн
Dead Misfire MK7 GTI, Another Shop Said Engine is TOAST
23:03
VW R32 Clutch Upgrade to Hold 500HP
11:14
Просмотров 86 тыс.
three feet under the keel   #offroad
1:00
Просмотров 2,8 млн
ГЕЛИК из ДЕРЕВА!🌳 #shorts
0:37
Просмотров 2,3 млн