How to Fix Broken Charging Port on Hoverboard Smart Balance Scooter 

It would be nice if I could see what your doing

I have one where the wires came off the charging port when i was removing the cover. Help! where on the back of the carging port do these wires go? Two red and two black.

Thanks , was curious what the 3rd prong on the plug did and happy to see it does not go anywhere special ... I want to use a few of the 1.5A chargers for another application.

Hi thanks for the video. I just ordered a new charging port. Before I replace it I want to be sure of which pin goes for the black wire and which goes for the red. I should have taken a snap shot before pulling out the faulty wires. You may wish to send a shot of it to my email.

Couldn’t find a video on how to remove the casing on a Hovertrax 2.0,so I dug in. Remove all perimeter screws on the bottom,flip over,remove rubber traction pad,then remove all those screws except two side by side screws in the center.

Thanks man you saved My life +1 follower

Wear do order the parts from

Hello. I have another old urban glide 65s which has a 2 pins charging port. Do you know if I can replace by a 3 pins charging port ?

The part I ordered for the replacement on amazon has 4 wires on the end that plugs into the motherboard but the one I am replacing only has 2 wires and 3 white plastic ends.

thanks

Hi Johnny, my hoverboard battery symbol light keeps flashing and beeping, even after charging. Do you know what the problem is? Help would be much appreciated regards Joe

Hello one of those little sticks in my charger port broke. Can u tell me what to do and help me out

I can’t seem to take out the thing off the motherboard how do you do it

I just got a hover board and it worked fine. It was a hands free smart board x2 from swagtron. I works great but it doesn't charge like the others have posted below. When I plug in the charger the red light on the charger turns to green right away and the board just doesn't charge. I know that the charger light should be red when charging. The charging port is plugged in to the mother board. Would the board be defected or would you guess it would be the charger?

Does anybody know what is the name of that cable my i got my hoverboard but it’s missing the whole cables

why there are 4 cables from the connector? if the battery has only two? what if i connect directly the charger to the battery? i know it has the BMS inside the pack so ...

Where do you get the charging port from for the sky walker

i just want to re solder old wires back on. Mine is a 4 wire connector on the board and three on charring port. two pins are used. witch pins get the positive? and witch get the negative? Thanks, Tom

Where can I order a 2pin (female) charger port harness for a super turbo 2000 w/Bluetooth?

What kind of screwdriver?

Jesus. Can’t anyone give the pin out of the charging port? 1 2 3 4 wires. 2 black. One red one orange. Which go where? Power cord, which is ground and which is positive?

What is like name of the Charging port like it's name or model

where can you find a charging port for a Lamborghini hoverboard

great. cant see jackshet what u doing half the time.

My is done

My hoover has 3 prongs on the charging port but on 2 wires go to the Inside of it.. 1 prong is completely empty.. wondering if it's supposed to be that way?

We have a hoover board and when we plug it up to charge it starts beeping and does not stop until it is unplugged. So is that the charger or the port.

thank you so much

The nut for the port won’t fit what should I do

Is this that problem when you plug IT IT when it has no battery and IT doesnt show red it shows green and it doesnt charge is IT this problem that u showed us?

good job

hey my charger port is like popping out and wont charge if if i put the charger in i can send you pics of it

Do you know where i can buy a swagway battery?

Full battery charge just to need hotwired

hello, we have problems with charging the battery is not charging on the hoverboard it shows orange but it dosent flash when its on the charger only bluetooth works nothing else and when its not on the charger then nothing at all works not even bluetooth

Yeah I seen your video I got the message but I need to know my charging port is with three holes on it it's a e-wheeler disabled scooter and it got a positive and a negative water for the plug is it missing another wire on the on the pins to the charging post is that why it's not charging I know I need to get another charger but I want to know if that's the way it goes or did a wire fall off when I was driving and driving it and I bumped and someone I get pulled the charger out and and it's not burnt but I'm trying to find out about what wires go on the port on the e-wheeler disabled scooter I want to know how many wires go on the port there's only one port and there's only two wires on the pins is it supposed to be an extra wire like a white one red one or a black one where you charge it it's only two wires on there it's a once missing

My prongs are too close together how I fix it

My prong broke off from the charger port, what should I do? Should I just get a new charger port or can I put the prong back in please respond asap.

What kind of charging port do I buy

You are smart

can you tell me where I can get one of those connectors for the charging port

Hello again johnny, my hoverboard keeps shooting smoke everytime i turn it on. Can it be fixed or nah

How to hotwired my Hoover board

Hey, I have problem with my hoverboard... When I plug-in charger after one hour turns green light on the charger... I can drive it then only 2 km and battery is blinking. Can you reply pleaseee

How can I tell if it's my charging port that's broken? My charger works on 1 of my daughter's hover boards but not the other one.

Where do you get a new charger port and battery charger?

Couldn't see had your camera set to low once you restarted

I really need a charging port

Hey johnny, 1 of the 3 little sticks inside the charging port broke off, what can i do

can u help me my hoverbord. is broken cause it wont turn on please help

I can’t fit my charger cord into the charger on the hoverboard it’s not matching up please help

Where'd you buy the charging port from

i do not know how i bent it

I cant see what you are doing here!

Things just got to smarter than I am

TᕼᗩᑎK YOᑌ ᔕO ᗰᑌᑕᕼ

kids tend to step on them and yank instead of pull the charger out.

My charger port is messed up

Good information, terrible video. Do you ever look at your videos before you post???

Make a new one, sorry I had to cut the video off at the hardest thing about the job!!!

Hey bud, cant see what your doing, watch what your doung when recording yourself your out of the picture frame

I know your trying to help people but your video is not too good, lots of what you was speaking of the camera is NOT showing what your talking about.

I hsve replaced the new charging port and dosent work am i fucked ?

Can't see what your doing.

What's the point of making this video where your audience can't see what you're doing?

my charging port is broken

When I plug in my hoverboard the wheel jerks and the charger sparks, it broke on my birthday D:

The vibrating is so annoying incould even watch it

Guys me my charger it is not working

I put mines under my bed

My fucking charging thing completely fell out

I tried to open it and it spraked

Bad filming

Dude . . . Your hands were totally out of view. Couldn't see anything you were doing . . . *grumble *

ثثبل

U can’t actually c what he’s doing 🤬🤬

Your video is bad, can’t see what your doing

What the hell....we cannot see anything. Take this video down

TᕼᗩᑎK YOᑌ ᔕO ᗰᑌᑕᕼ

My charger broke off in the port