HOW to fix BROKEN "PLASTIC" ONCE AND FOR ALL 4 cheap !

Подписаться 500 тыс.

Просмотров 610 тыс.

50% 1

We show you how to use Crazy glue to fix broken tabs on your car, even bumper covers.
See this videos on another way to fix broken plastic • How to Repair Difficul... and • AMAZING...How To FIX B... or this • STRONGEST! Plastic Rep...
Hello Everyone, SWEET PROJECT CARS here with cool, trick and affordable ways to do things for the DIYER'S OF THE UNIVERSE!
TOOLS:
Hand Scissors amzn.to/2hB1JuL
Air Nozzle Kit amzn.to/2zq2spU
Old 99 amzn.to/3fqZ1nU
Venom Gloves amzn.to/2B8kLBh
Super Glue amzn.to/2yXRKXx
Tweezers W/Mag Glass amzn.to/2AaasPp
Paper amzn.to/2zrea3D
HERE WE SHOW YOU HOW TO FIX BROKEN PLASTIC THAT WILL LAST FOREVER.
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this RU-vid channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 458

@SweetProjectCars 5 лет назад

Hello Everyone see these as well, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html or this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html plus we have a video on that is even strong than any of this.

@TruAnRksT 5 лет назад

One of the best things to use instead of paper are used drier sheets. They are amazingly strong, thin and porous with embedded fibers. They mold into the super glue instantly and to the shape of the object. You can wash them first if you are worried about residual fabric softener.

@garifo 5 лет назад

If you put baking soda it will dry faster.

@alexanderramos6571 2 года назад

@@TruAnRksT you

@mantaship 7 лет назад

I used this method on my drill battery case. The internal posts had cracked so it was hanging open. Supposedly, 'irreparable'. Unscrewed all the parts, wrapped the broken posts in paper and crazy glued the paper on. reapplied several coats. Screwed back together. PERFECT! Saved myself $100 in new battery cost. Total job cost: $3. Been using it for months now... THANK YOU, THANK YOU, THANK YOU!!!

@SweetProjectCars 7 лет назад

Will you are very welcome !!! :)

@schmeedabee 4 года назад

Thank you for this. I was able to reattach my bumper on my Mazda 6 with this technique in addition to some JB-Weld plastic bonder. Saved over $1000 as the replacement bumper cover is ridiculous expensive.

@SweetProjectCars 4 года назад

Happy to help! That's awesome, great job! Take care my friend. mad Mike the hammer SPC

@w2ge 7 лет назад

I use carbon fiber filament strands, or carbon fiber cloth. And you can also use fiberglass cloth. Adds strength compared to paper. Another FYI tip, baking soda is a gap filler and causes cyanoacrylate (crazy glue) to instantly "fire"; bond.

@elysianfields6350 6 лет назад

Another suggestion if thickness isn't an issue is to use pet resistent fiberglass window screening.

@copssuck7491 6 лет назад

Tyvek is also a good reinforcement fabric to use. Often used in credit card pouches from the bank or reusable painters coveralls.

@adenandan8325 5 лет назад

can I use on my wiper broken blade slider supports ?

@felinecontrolled 5 лет назад

Yes! Someone else who knows about super glue and baking soda!! It's my go to to fix anything plastic.

@SweetProjectCars 5 лет назад

Lesh4537 Do you mean this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html or this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html

@DiscoFang 5 лет назад

I find using tissue or toilet paper the best. Separate the ply and it sticks to the contours of the plastic much more easily. You can work so fast with. You are so right, this is an incredibly strong repair. And paintable.

@colindraper1624 7 лет назад

I'm a car hustler up in Canada. Just wanted to say that you have another great video. Keep up the great work !!!

@SweetProjectCars 7 лет назад

Thanks much Colin..we are gald to share simple affordable tips

@edwardcawley4681 5 лет назад

I use dryer sheets after they have been run through the dryer[fresh ones don't stick] The omni-directional strands are far stronger with even less layers.

@44xxggaaj Год назад

Great idea ! Even better if you spread the glue out evenly and add a dusting of baking soda it will dry the glue instantly and make a hard plastic like layer incorporated with the dryer sheet with a couple of layers of this it will really add strength to the tab . I used only baking soda and super glue in 3 applications to repair a broken piece of plastic on my cars AC vent mounting tab , just had to sand down a little of the uneven build up and it worked great and strong !

@jennarallysinging 10 месяцев назад

I'm a baking soda/ super glue firm believer!. How do you usually apply yours? I'm definitely no professional LOL

@darlenerothenay6251 5 лет назад

Great information. Love reading everyone’s comments! Some very ingenious gentlemen out there. I have learned so much about doing my car from you all!

@mark711991 7 лет назад

Thanks for the video man, when this happens to the bumpers you see people just trying to put screws through the bumpers to put them back in place ruins the look on the car, This is so easy cheap and quick, Wish I thought of this before

@SweetProjectCars 7 лет назад

I'm with ya mark thanks for sharing

@dzat2636 4 года назад

Never thought of it. But I used it to repair my Evo X front bumper. It helps me save hundreds of Ringgit. (From Malaysia here). Thanks man.

@SweetProjectCars 4 года назад

Thanks for sharing. Great job! Have a fantastic day! mad Mike the hammer SPC

@joeseda8102 2 года назад

TIP: I use plastic screen material instead of paper and results are amazingly strong welds because plastic screen becomes part of the weld when glue gats into the tiny squares the screen provides. Never had one come back for repairs.

@SweetProjectCars 2 года назад

Thank you for watching and sharing Joe, we really appreciate it my friend, have a great day. mad Mike the hammer SPC

@jonathanmcadams-nx5zp 8 месяцев назад

Yes that is good. I use a structural epoxy made by Norton. It has a Viper on the front of the dual cylinder tube with the two part mixtures. I use metal screen because it is able to bend and form into whatever position you need and the structural epoxy is thick and will stick to anything. It is black too which is good because you won't notice the repair in between seams or from under the car. I also have stamped out the rectangles of these types of cutouts on bumpers with a thin aluminum and made a rectangular washer with a simple metal shear and put one on either side with epoxy and used vice grips to sandwich it together. I have also done it by heating up the bumper that is broken if the plastic is still all there and I use a propane torch and get it melted and put two metal cutouts on the part where the slit is and I squeeze it again with vice grips and make sure is dries while in the right angle. Then I will use an artist brush and brush structural epoxy on the repair everywhere and make it thick and let it cure then use a Dremel to grind it and shape it to the perfect size. The final and easiest way I have done it is to use cotton balls and structural epoxy and I will literally just squirt the structural epoxy onto the place where the bumper has come off under the rear quarter and I load it up and smash cotton balls that I pull apart and make the cotton thin and fluffy and I just keep pressing cotton into the epoxy and smashing it into the surface of both the place where the bumper covers, the bumper cover, and whatever else is there to attach it to. Just make sure you can smash the bumper in flush and don't add too much cotton puff mixed with structural epoxy. It is amazing what it will do. It allows you to fiberglass essentially to plastic parts. I will just mash in like a handful of cotton or polyester puffy stuffing into the area and use an artist brush to keep spreading more epoxy on the polyester stuffing and it flattens it and makes a bridge or bracket or whatever you call it. Then the final time I just put a very thick dollop of structural epoxy on the thing in between bumper cover and everything else in that area so that it will adhere and I smash the bumper cover on and then clamp it down with a hand squeeze clamp with rubber pads if it will fit and turn on a space heater and point it towards the area and let her rip about two feet away on high. If the hand pump clamp doesn't work you can use a rubber sanding block for a pad to not scratch the bumper cover and find a broom handle or something to wedge in between a wall or a curb or even a stack of heavy brick or a toolbox to press on it where it is flush and the factory wanted it installed. Then wait a half hour with space heater onto it to cure and you will not be having issues with that thing ever again. Rarely do people have to take those back bumper covers off. But the front is a different story. I would not do this to the front. For front I always use the Norton structural epoxy and cut my own plastic to repair anything. Use plastic from scrap parts of cars like under trays and fenderwells or plastic boxes you buy at home Depot if you must. Plant pots also work. They are decent plastic. I like to use plastic scrap I get for free from the local junkyard that comes from other cars under trays. The final way to do this is to put the bumper cover into place and tape it flush and where it is suppose to sit. If you have the access open to the rear fenderwell on the side you are fixing (the bumper cover must be in place on both sides where you want it to stay) then you can use structural epoxy on the seams from behind the bumper cover and zig zag a line on the seam where bumper and fender are. Then either press in some plastic screen, thin wire mesh, Painters tape (this will make you have to cover everything on top of the painters tape) or fiberglass cloth, pink or yellow fiberglass insulation stuff, or even paper and random stuff like a piece of a ziplock bag or a grocery bag cut down or whatever you can find. I have seen people use sticks on the side of the road to fix a falling off bumper cover with a structural epoxy like Norton or Lord Fusor because the epoxy is doing most of the job. The rest CAN act as a place to put the epoxy and a way to make the epoxy cure where you want it to instead of thinking of the object or material used as something that is a splint or a bracket or whatever you want to call it. Paper tape for mud and Sheetrock joints works with thin glues too and epoxy. It just gives structure to the epoxy while it cures and becomes the structure itself. The fastest way if you have room and you just want to go quick is to use the metal tape for air conditioning duct repair and install work. It is ultra sticky and can be formed into any shape and bent and made to contour to anything instantly like aluminum foil. You can use that on any part that won't be seen just to secure it and make a shape and form to put your epoxy onto. Just rough up the spots where the epoxy will be sticking to with 36 grit really lightly and for just a second. It will instantly give a rough surface. Then use the metal tape and only use just enough to stick to the surface you have to work with. You want to use the surface for the epoxy not the tape. So if it is a 2 inch by 3 inch piece missing on a bend make the metal tape 3.2 inches by 2.2 inches and however much bigger it needs to account for the curve or bend of the voided portion or part. Stick the metal tape on and form it, use two or three layers if you have to and do both sides if you have to. The structural epoxy will do the work. Make sure the part just beyond where the tape stops is sanded with a really rough grit paper like 36 or 60 grit at least (the rougher the better, those hairy pieces will act in your favor here) and use a rag and acetone really quick to rub the surface you sanded for the epoxy to grab. Then use Norton structural epoxy and either use the mixing tip to apply it in a zig zag on the tap and overlap onto the plastic by an inch or use an artists brush but make it thick. The structural polyurethane and structural epoxy will both do what you need probably but I would use the Norton's structural polyurethane because it is just the best. Lots of companies make it like 3m, Lord Fusor (Lord Products) even JB Weld and I think even Gorilla might make something polyurethane but it is a much better option that super glue and your typical epoxiea you find in the store. Night and day difference.

@mikeb6418 6 лет назад

Mike! I just tried this on my Mercedes Benz passenger side mirror housing. I took it apart and it snapped at a weak point. I cleaned that baby up with Lacquer thinner and cut two strips of paper the appropriate size. I glued the two sections together first .... then applied the paper on the inside of mirror housing on the crack and then super glued it on top. Mike Incredible man. Solid as a rock. Didn’t even need backing soda to make it stronger. Thank you so much for sharing your wisdom and experience with all of us !!!! U Da Man!!!

@SweetProjectCars 6 лет назад

Big mike thank you for sharing my friend we are so glad it worked great for you have an awesome weekend and we hope you are feeling great :)

@robertcrittenden497 3 года назад

Thank you for sharing. The glue and baking soda works great. I take my die grinder and grind down into the crack. Then do the baking soda and super glue then grind down the dried glue and soda. But grind twice down a little for extra strength. Have been glueing everything plastic. Car, truck parts, house hold items. Just glued my refrigerator door handle. And works great. Super strong

@SweetProjectCars 3 года назад

thanks robert we have many videos on super glue and soda it works well, this video was just another method that can be used have a great day mike

@twowheeledsmurph 4 года назад

I used this method for repairing the front fender on my tracer 900 GT and it worked great!! Thanks so much!!

@SweetProjectCars 4 года назад

So glad to hear! Thank you for sharing!! Have a fantastic day! mad Mike SPC

@charger19691 6 лет назад

Great idea for fixing these bumper cover slots ! Thank you for sharing!

@fonhollohan2908 Год назад

thanks for the tip, I just undid the bolts on my rear tail light and it's in the middle of Feb, in Canada, the plastic tab sheared completely into. So in the summer I plan on using this technique to repair that broken tab. Thanks again for posting, appreciate that.

@SweetProjectCars Год назад

Glad we could help Fon! Thank you for watching and sharing, have a great day and all the best on your project. mad Mike the hammer SPC

@stormman8393 Год назад

Thanks mate for this. I can hardly wait for tomorrow. I've got a bit of fixin' to do.

@SweetProjectCars Год назад

Glad to help Stormman! Thank you for watching and sharing, have a great weekend and all the best on your project my friend. mad Mike the hammer SPC

@krisgriffin9090 6 лет назад

Just tried this on my bmw 335i and it worked a bloody treat! Nice 1 Sweet Project Cars! Subbed!!!!

@SweetProjectCars 6 лет назад

kris griffin thank you very much and we are glad to have you my friend:)

@lostmagicofdisney 5 лет назад

Wish I knew about this before we replaced a bumper last year. Thanks for the tip!

@malparish2938 5 лет назад

Thnx Sweet project cars, just used this & it worked a treat!! Simple & effective.

@RonConsumer 6 лет назад

I always hated using super glue... but you have given me new hope in using super glue thanks for creating the video.

@SweetProjectCars 6 лет назад

Ron thank you very much my friend :) we truly appreciate your great comments :)

@lh98 5 лет назад

Hit the super glue with baking soda and it hardens almost instantly. No waiting. Love little lessons and tricks like this. Thanks!

@SweetProjectCars 5 лет назад

Peter Last Do you mean this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html or this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html

@lh98 5 лет назад

Yup guess I missed those other videos and didn't look at all of the comments to see ppl have already shared this. Oh well just trying to share the same as u have. Good day

@SweetProjectCars 5 лет назад

Peter no problem my friend we love to help any way we can :) mike

@gthmcty111 7 лет назад

Wow you guys are great!! I fancy myself to come up with some clever ones but you guys are REALLY good! Thanks for sharing because you guys have definitely helped me out in the garage!! Keep up the great videos!

@FixItRyan 5 лет назад

So simple yet so genius! I love it!!!

@An9eL_C 6 лет назад

You really are amazing showing us peons the tips and tricks of a pro... Thank you for sharing your videos...

@SweetProjectCars 6 лет назад

angle C thank you so very much we try very hard to do videos that will help many great people like yourself :) Have a great New Year !

@rogercorriveau5889 6 лет назад

Ok...call me a skeptic...always have been, always will be. Fixing broken plastic with superglue and paper?? YEAH...RIGHT!! Well, I tried it on a broken bumper end on my 2003 Xterra. IT WORKED!! Really strong...I used 3 coats. Harder than the rest of the piece. Thanks for posting this, SPC!!!

@SweetProjectCars 6 лет назад

Roger Corriveau you are very welcome my friend glad we could help :)

@HeartSoulLeake Год назад

Excellent! exactly what we were thinking, but now we have validation.

@SweetProjectCars Год назад

Glad to help! Thank you for the view and comment, have a fantastic day my friend. mad Mike the hammer SPC

@fransterhorst3694 7 лет назад

Once again, cheers guys! this is yet again another good one that i will use for sure.

@SweetProjectCars 7 лет назад

Frans Terhorst thank you so very much for that we truly appreciate it

@ChristopherAvery-u4p 4 месяца назад

Good job! Nice tip brotha will try with my 1 broken tab on my Tundra!

@Tec2Nut 6 лет назад

Another class act , well done lads

@SweetProjectCars 6 лет назад

Martin Gillespie thank you very much :))

@michaelpalmisano6788 5 лет назад

I plastic welded mine in that same exact spot 5 years ago an still rock solid .. this glue An paper trick does work awesome tho if you don't have access to a plastic welder ..

@SweetProjectCars 5 лет назад

You’re exactly correct on that I wish all of our DIYers had plastic welder’s they work real well

@pern1044 5 лет назад

Respects. Thank you for the great tip.

@rebeccashetter2309 7 лет назад

Thank you; great video. I will be sharing this one. Everyone needs this handy tip. Thanks again. Bekki.

@SweetProjectCars 7 лет назад

thank you Bekki

@Jason-hv4eu 5 лет назад

Neat idea. I’ll try this method next time. Curious how well it will work. Thanks!

@rexnichols6103 5 лет назад

Works great. Strong as paper

@michaelbutcher9343 7 лет назад

Here is my tip - I use paper towel instead of paper. It absorbs the krazy glue better than paper. I am finding your videos very satisfying to watch. I also like to think of cheap ways to fix things instead of just buying a new replacement piece.Keep up the great job! Subbed!

@SweetProjectCars 7 лет назад

thanks for the great info Michael and welcome to the team

@jsz2619 6 лет назад

What if you use the blue shop towel? It's thicker than the regular paper towel but stronger and absorbs liquid well. Will it make the bond even stronger?

@marketingmajor8126 5 лет назад

@@jsz2619 You can do the same thing with a piece of fabric. Fabric is stronger than paper, paper towels, or blue shop towels and also absorbs really well.

@rplle7 5 лет назад

@@marketingmajor8126 lol, rock paper scissors

@Raaaay66 Год назад

Thank you for this video it saved me from a stupid mistake I made. The only thing I did different was I used a small strip of medical tape the glue helped keep it in place and the mesh material design soaked up the super glue like a resin with the medical tape acting as a kind of fiberglass mat. Worked perfect and dried very strong which is exactly what I needed.

@SweetProjectCars Год назад

Glad we could help Raymond! Thank you for watching and sharing, we appreciate your input as well, hope you have a great week my friend. mad Mike the hammer SPC

@blodknut5595 Год назад

Rather than using your tweezers to smooth out the super glue you can use wooden skewers. For small fine jobs a tooth pick. It just means you don’t have to clean the tweezers or run the risk of the glue drying onto the tweezers - potentially ruining the tweezers pints and the ability to grasp fine objects. Also, skewers and tooth picks are great applicators if you need dab small amounts of glue to a small or thin surface. Don’t just squeeze the super glue tube onto the item you wish to glue as you will easily apply to much. This excess glue is hard to clean off with out smearing the glue onto areas of the glued item that you might want free of dried glue. Visible surfaces or areas involving moving parts are just two examples you might not want excess glue to dry upon.

@SweetProjectCars Год назад

Thank you for watching and sharing your input, we appreciate it, have a great day. mad Mike the hammer SPC

@blodknut5595 Год назад

@@SweetProjectCars thank you for creating the “fix it” content and posting it on RU-vid. it certainly helped me repair a broken oven door with broken screw spacers. It potentially saved me losing part of my rental bond when I move out of my rental property in a few weeks.

@MrRockydee07 5 лет назад

Thanks yes this helps 👍 l used black oxide powder before with this glue, I'll try the carbon fiber paper next time .....

@JC-gw3yo 5 лет назад

thanks for the great tip...You are the MAN

@JamesMiller-cw3fc 2 года назад

Thanks man that was fantastic it really helped me a lot

@SweetProjectCars 2 года назад

Glad we could help James! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

@EDToft 5 лет назад

Lightweight nylon fabric works great too...and nylon fabric ribbon comes in loads of widths. I've actually repaired nylon dryer rollers by wrapping nylon ribbon around the worn side and soaking with super glue/ca glue. It polymerizes well and sets harder than the original nylon. Excellent way to repair nylon or plastic hinges too...think glove box and plastic console hinges. Just put a narrow bead line of petrolium jelly at the hinge line to keep it from soaking up the ca glue.

@Drippin94 5 лет назад

Thank you!! I Always love watching your videos!

@MicBergsma 3 года назад

Nice screenshot on thumbnail 😂😂👍🏼

@SweetProjectCars 3 года назад

Thanks for watching! Have a fantastic day. mad Mike the hammer SPC

@marioavaughn 2 года назад

Great! Me and my MKZ have an appointment. Thanks!

@SweetProjectCars 2 года назад

Go get em Mario! Thank you for watching and sharing, have a great week and all the best on your project my friend. mad Mike the hammer SPC

@edwinferreras4820 6 лет назад

Genius. You really a day to day saver.. 😎👍🏼

@SweetProjectCars 6 лет назад

Thank you very much Edwin We truly appreciate that have a great day

@edwinferreras4820 6 лет назад

More power to you. I will keep on following you. 😎👍🏼

@SweetProjectCars 6 лет назад

edwin ferreras good deal and thank you for being here on our channel, it makes all the time and effort it takes to do these videos worth it:)

@thedriverux 5 лет назад

Awesome trick.

@rayjones3212 5 лет назад

So, I had tried to do plastic repair before, but never with adding paper or any other type of material on the break. Generally the plastic repairs I have done in the past consisted of computer case / cabinets / hinges / etc. repair since that is my line of work. So now in the future if I come across a broken part that needs to be repaired you can bet that I'll be adopting this method!

@The_Irish_Volunteer 6 лет назад

I did the same thing on a watch second hand years ago. It was snapped in half so I placed a piece of paper under the two parts and super glued them together wth the paper underneath. I trimmed off the excess and It's as good as new and you cannot see its been repaired.

@universalchiro 5 лет назад

Excellent tip! Thank you for sharing.

@SweetProjectCars 5 лет назад

universalchiro you are very welcome my friend ...mike

@peterduxbury927 5 лет назад

Make sure the surfaces to be bonded are flat and clean. Then heat up an old stainless steel knife until the 'bluing' appears. Simply slide this hot knife between both components of plastic, that you need bonding. Slide out the knife and hold both parts steady until cool. That's Plastic Welding, but it doesn't work well on some softer plastics - such as LDPE or HDPE. ABS isn't bad to weld. Sometimes I remove some plastic from the parent material, and then (with heated knife) butter this in to build - up the newly welded parts. In some cases, the weld becomes much stronger than the original.

@jpyron5846 6 лет назад

Outstanding! I always pick up great tips from your channel. Thanks for sharing!

@SweetProjectCars 6 лет назад

thank you very much my friend :)

@MagnumOpusSRT 7 лет назад

Great video. I use Tech Bond glue. It is really strong and comes with a spray accelerator to make the glue cure.

@SweetProjectCars 7 лет назад

Thanks Harold ..and thank you for sharing :)

@ecaff9515 6 лет назад

Excellent video an process. Thanks for sharing

@usernamemykel 7 лет назад

Excellent, as always.

@SweetProjectCars 7 лет назад

usernamemykel thank you very much we truly appreciate that glad to have you with us

@keithladouceur6636 4 года назад

Awesome tip. Very good video!

@SweetProjectCars 4 года назад

Glad it helped! Thank you for being here with us. Have a great day my friend. mad Mike the hammer SPC

@amalfi460 6 лет назад

You are a super genius!

@SweetProjectCars 6 лет назад

neil thank you so very much for the great comment and we are sure glad you are here with us :)

@mattwilhelm7187 5 лет назад

I like to mix super glue with baking soda, it sets very well. I've tried paper an super glue, but I think the baking soda bonds better.

@SweetProjectCars 5 лет назад

Matt Wilhelm Do you mean this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html or this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html

@scottfirman 5 лет назад

@@SweetProjectCars llll

@thestressisgone 7 лет назад

YO! how do you guys come up with this stuff....truly a life saver here. I thank you for this tip. We have a lot of car issues and you guys share stuff that will come in handY some dAY...

@SweetProjectCars 7 лет назад

we thank you...we just try to come up with easy cheap ways to fix things using coming sense.

@purask 6 лет назад

its all about need do to with lots of trial and error, thats why we are cutting today wood with CNC's and lasers

@tonyeclau 5 лет назад

It's really fantastic that you're sharing these great ideas with the public. I wish you well all the way from Thailand!

@SuperClothier 2 года назад

Awesome, thank you

@SweetProjectCars 2 года назад

You're welcome! It's our pleasure Tanning King. Thank you for watching, hope you have a great day. mad Mike the hammer SPC

@gergemall 3 года назад

Great job

@SweetProjectCars 3 года назад

Thank you very much Jon, we appreciate the view and comment, have a great week. mad Mike the hammer SPC

@kimohoganesq 5 лет назад

Many Thanks Brother !!!!! Saved me a ton of B.S. !!!! :)

@sun6v546 3 года назад

U R wonderful , Mate .....love you Brother.

@SweetProjectCars 3 года назад

Thank you so much 😀 It's our pleasure to help my friend. Thanks for watching. Have a great evening. mad Mike the hammer SPC

@zenovice8240 6 лет назад

Great, simple, sturdy, easy fix! Thanks. BTW: I saw a RU-vid video where a guy mixed baking soda with "Super/Crazy Glue" to fill in small gouges in helicopter blades, and other types of materials. He could do this because, when mixed - then dried - these two things bonded into a rock-solid composite via some bonding reaction between the separate substances. I wonder if this idea might be applicable to what you're doing, here...you know - making the repair "weld" spot even stronger? Just a thought. BTW/FYI: You said, "I can use another piece of paper and make it even stronger...do you get my 'just'...?" Actually, it's NOT 'just' - it's 'gist.' Like, "That's the gist of the whole thing." Or, "That's the gist of it." Anyway... Thanks for making/publishing these vids, and PLEASE keep'em comin'!

@SweetProjectCars 6 лет назад

Zeno Vice you mean this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html these should help you as well :)

@dustinserbin3054 7 лет назад

Great video, JB Weld also has some great products when fixing plastic clips or pieces. keep the easy fix videos coming!

@SweetProjectCars 7 лет назад

Thanks Dustin :)

@mikeb6418 7 лет назад

Dustin Serbin w

@luv4life1 5 лет назад

Awesome vid and the comments are great ideas

@SweetProjectCars 5 лет назад

You very much we truly appreciate that Mike

@stevehagen6913 7 лет назад

Excellent video. Thank you.

@SweetProjectCars 7 лет назад

thank you

@bossdog1480 5 лет назад

This is timely information for me to repair the side skirts on my 05 falcon.

@faisalsns 3 года назад

Truly useful!!

@SweetProjectCars 3 года назад

Glad it was helpful! Thank you for watching and commenting, we truly appreciate it. Hope you have a fantastic weekend. mad Mike the hammer SPC

@ZKev1 6 лет назад

I have used this trick with old cotton pillowcases instead of the paper, it absorbs the glue better

@SweetProjectCars 6 лет назад

thank you very much for the great comment..

@bobvansand6346 6 лет назад

Thx again from bob the Belgian🇧🇪😎 original indeed!

@SweetProjectCars 6 лет назад

Bob good to see you my friend always a pleasure have a fantastic day we will see you Tuesday

@bobvansand6346 6 лет назад

Sweet Project Cars , pleasure mate! 🇧🇪😎👊

@brettratell165 6 лет назад

I've done quite a few Super Glue repairs to interior parts over the years. Great stuff! Have you tried the Super Glue Gel? It is much more controllable.

@SweetProjectCars 6 лет назад

Brett Ratell yes we have, also see these ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zd9fU_PpIkc.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html or this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html

@willrogan955 6 лет назад

Very clever ! Yeah that helps.

@SweetProjectCars 6 лет назад

Thanks Will we did another video it just came out Tuesday you should check it out have a great weekend my friend

@willrogan955 6 лет назад

Thanks Mike ! Same to ya

@notmyrealname1437 6 лет назад

You can use waxed paper to apply pressure to super glued work. I glued cracked paint back on my bumper and smoothed it down by holding a folded smooth piece of cloth over the waxed paper until the glue set, then wiped off the excess with 90% isopropol alcohol or starting fluid (ether), I forget which. The paint shop was very impressed with my temporary fix.

@arrowstheorem1881 5 лет назад

Why waxed?

@Lone1yGuy 7 лет назад

You the best man

@SweetProjectCars 7 лет назад

thank you

@22AMOPRO 7 лет назад

you're just making a cast for it I did that with a couch a small towel and Elmers glue with the Press clamp get the same thing real cool never knew that for plastic thank you

@SweetProjectCars 7 лет назад

Amopro 22 thank you for sharing your fix ...this super glue fix is cheap, easy and a very strong fix

@michor10 5 лет назад

This is great!

@JR-zw2vb 3 года назад

any long term results update?? Great tip, thumbs up.

@SweetProjectCars 3 года назад

This fix will last longer than the car you are fixing JR. Thanks for watching. Have a great day. mad Mike the hammer SPC

@Obama___ 2 года назад

Also baking powder and supper runny supper glue works greats, I’ve heard the use to repair chips helicopter blades, it hardens jsut as like a small chunk but you could sand it down and make it nice and maybe even add some paint, more of a wood working technique but still may work better than paper

@SweetProjectCars 2 года назад

Thank you for watching and sharing, we appreciate it KelpMan, hope you have a great day. mad Mike the hammer SPC

@danielholtxxl4936 6 лет назад

I’m gonna use this on my minnow bucket lid! I goobered it up with silicon caulk but it’s too bulky and isn’t strong. Thanks!

@SweetProjectCars 6 лет назад

you are very welcome Belteshazzar XXL

@mingiasi 6 лет назад

Hah! I use similar method to fix broken cracked plastic elements on computers! Only thing i do differently is i use soft paper tissue to mold it into place where it needs to stay. It forms almost crystal like thing thats very strong! only place it does not hold is flexible parts (hinges, very bending plastics). This method looks good also, will try it out on my car (broken stupid fender tabs). Thanks for the tip!

@SweetProjectCars 6 лет назад

mingiasi thank you for sharing we also use this method for larger parts ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r4E7ntmgXqo.html

@mingiasi 6 лет назад

Ooh thats a neat idea, never thought to use soda as medium. Thanks man!

@SweetProjectCars 6 лет назад

mingiasi thank and yes I can't believe how strong it is and as far as a quick set...never seen anything like it :)

@andrewcrowe6834 4 года назад

Wow I'm going to try this on my motorbike 🇬🇧

@SweetProjectCars 4 года назад

Give it a shot you won’t be disappointed have a great night thanks for being with us mad Mike sweet project cars

@andrewcrowe6834 4 года назад

@@SweetProjectCars I have now used it on 3 separate areas on my motorbike and its rock solid. Thanks again!

@scottfirman 5 лет назад

Pieces of yarn also work. You can flaten it out as you go. Carbon fiber is probably best. Fiber glass matt also works.

@michaelmixon2479 6 лет назад

Great tip and great job!

@SweetProjectCars 6 лет назад

michael mixon THANK YOU very much my friend :)

@michaelmixon2479 6 лет назад

Truly enjoy and learn from your videos! Thank You!

@SweetProjectCars 6 лет назад

michael if you are learning then we are doing our job my friend, thank you !!!!!

@Zspeed 5 лет назад

Awesome!!!

@brianbaker359 4 года назад

Excellent, I just wished you would have shown more detail after 6:20 as to how the upper and lower panel seams are attached together. It looks like a screw is needed from bottom into top panel on the very end, is that correct? I presume that the repair you did was to allow male and female clips to lock together. Need to do my son’s 2009 Honda Civic panels that have separated like your example. Great video, thanks for sharing your skills.

@SweetProjectCars 3 года назад

Yes, the repair was to lock the clips together. We only replaced screws that were already there. Thank you very much for your comment and for watching. Have a great day. Sorry for our delayed response. mad Mike the hammer SPC

@cuda70gt7 5 лет назад

Wow that is so cool.

@dangcao8341 5 лет назад

Thank you for that. I salute you!

@SweetProjectCars 5 лет назад

Thank You very much we truly appreciate that

@johntunstall9698 5 лет назад

I’ve done something similar to fix a Nintendo DS hinge, except I used cloth instead of paper.

@mariocaguimbal6361 6 лет назад

Great video.

@donstevens7847 Год назад

Sweeeeet! Hey, would aluminum foil be stronger yet? Or will it not stick?

@SweetProjectCars Год назад

I would stick with the process we are sharing, you will have great success Don. Thanks for watching and asking, have a fantastic week my friend. mad Mike the hammer SPC

@Emanual0607 5 лет назад

Fantastic!

@SweetProjectCars 5 лет назад

thank you

@Emanual0607 5 лет назад

@@SweetProjectCars You're welcome.

@salsapete2132 5 лет назад

Have you ever tried plast aid? great product

@itsmealex76 6 лет назад

thank you for the vid

@NormEZ 5 лет назад

Nice flip flops 😀

@SweetProjectCars 5 лет назад

ya i remember that day a long time ago when we did that video it was like 100 degrees out and i did the repair on the spur of the moment when i got out of the pool

@taktsoi9548 5 лет назад

After subscribing your channel, I've found this excellent video about fixing the broken bumper tab with super glue and paper. How does the glue and paper work together in the chemistry to make it bond super strong? I am trying to understand about this. I also see you have another video about using the super glue with baking soda as well. I will surely try it when the weather is warm. It's because the body kit of my project car honda civic is 4" above the ground only. One day I hit something that both side of front bumper got popped out and the tab where the bolt goes in is cracked. Thank you so much.

@SweetProjectCars 5 лет назад

Tak Tsoi you can do this video as well it is the strongest of all repairs ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnTTcZv4B54.html also see this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qq0grYZMWF4.html it tells you how strong the paper fix really is

@Professional_ProCraftinator 2 года назад

Fixed something like that on a Cadillac bumper the other day. Except I just used super glue and baking soda.

@SweetProjectCars Год назад

Thanks for watching, have a great day. mad Mike

@twogunsforme1 5 лет назад

WOW Man that was so awesome

@SweetProjectCars 5 лет назад

Thank you very much

@scorpionnetherrealm8937 2 года назад

Might have to try it rather than buying a new tailgate trim

@SweetProjectCars 2 года назад

Sounds like you've got nothing to lose, give it a shot, just follow the video to a T and make sure to use the exact products/tools we use and you will have success my friend. Thanks for watching and all the best on your project. mad Mike the hammer SPC