How To Fix Cub Cadet Snow Blower That Runs And Dies No Start Surges IT RAN GREAT LAST YEAR

Подписаться 10 тыс.

Просмотров 23 тыс.

50% 1

Mrs. Pattay’s Performance Bday Vids Submissions to Jpattay@gmail.com
Today we press on on with the Cub Cadet…as if it couldn’t get any worse it did. Lets fix something I can…the rest will have to wait! RAWR!
I fix and flip small equipment as a side hustle! SUBSCRIBE as I take you on that journey! How TO Videos on how service and repair your machines TOO! Don't forget to click to the LIKE BUTTON TOO! Comments are welcomed...GOOD OR BAD!
ru-vid.com/show-UCz6i...\
DON’T FORGET TO FOLLOW ME ON INSTAGRAM! @PATTAY’S PERFORMANCE
SOME EVERYDAY TOOLS I USE AS SEEN IN THE VIDEO!
Weld Tip Set that I use to Clean Carbs: amzn.to/3TCa1US
Micro Drill Bit Set: amzn.to/3vuJTn2
Adjustable Vise Grip Fuel Line / Rad Hose Pliers: amzn.to/4a7Ch96
Antiseize (Gift From the Gods): amzn.to/4a6TPCb
Dewalt Bit Set that includes Square Bits: amzn.to/4ar1vyT
12V Smart Charger for Electric Start On Mowers: amzn.to/49gMGOi
Upscale 12V Smart Charger: amzn.to/4cA5prg
IF YOU NEED SECOND HAND SNOW BLOWER PARTS CHECK OUT BAER’S SPARE’S! BEST IN THE BUSINESS
Link to Ebay Store: www.ebay.com/str/sidegrinders...
His Email: bearsspares@yahoo.com

Развлечения

Опубликовано:

6 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@stanmoonie6508 4 месяца назад

Thank you for everything. I followed your video and fixed my club cadet snowblower. The snowblower is a monster NOW!!!

@pattayperformance 3 месяца назад

Great to hear!

@jefferywelsh3860 5 месяцев назад

Snowblower yoga and the cheap and easy helped me. I did it a few years ago. I just had to refer to this video. It helped again. thankful to not remove the carb all together. she started. thank you

@pattayperformance 5 месяцев назад

Glad it helps! Don't forget to change your oil and grease the machine! Happy Blowing!

@mistyblue6396 Год назад

I am an older woman and so proud that I fixed it myself instead of paying a fortune to a small engine repairman, Thank you so much!

@pattayperformance Год назад

YOU ARE A ROCKSTAR!

@timhuls430 6 месяцев назад

Had a little difficulty figuring out drill bit size using micro bits I have but did and bam. Back in action 100% and funny I did about the same victory dance. Lol. Thanks and really appreciate the video

@pattayperformance 5 месяцев назад

Victory dance is the universal recipe that turns uncertainty to success!

@markemry7605 7 месяцев назад

Thank you for this great video. Mine now runs like a charm

@pattayperformance 5 месяцев назад

PERFECT! Glad I could help! Hows the snow fall been like this year?

@tS-sn7jt Год назад

Moral of the day in snowblower only buy Toro , Ariens, or Honda anything else you are potsing around like guy ….❤

@pattayperformance Год назад

Any snowblower beats shoveling snow. I feel like machine suffered from operator error. Really don't see alot of issues with MTD made machines once you upgrade the impeller.

@richardweeks1166 Год назад

We just got 10" of snow and my blower wouldn't start. This video bailed me out to get it running. Thank you!! Life saver.

@pattayperformance Год назад

YOU BAILED YOURSELF OUT! These videos mean nothing without people like yourself who take the intiativr to DIY! HOPEFULLY YOU ARE STILL IN FIX IT MODE...now is a great time to change the oil and service the rest of the machine! I have videos on that as well! Happy Blowing

@stromanbu Год назад

Instantly solved the problem..you sir are a life-saver!

@pattayperformance Год назад

Great job on the fix 🔧🇺🇸🦅🤙🏻

@hugitout411 2 года назад

I wish I had seen this video before paying a small engine repairman for a house visit. I was afraid to mess with my carburetor until you walked me through it with the perfect level of detail. Thank you for this awesome video.

@pattayperformance 2 года назад

You only make that mistake once! Great job on the fix! 🦅🤙🏻🇺🇸🔧

@samacquista3629 Год назад

@@pattayperformance thank you!

@jkola4 6 месяцев назад

Thanks for the walk through. My machine started surging off choke and then got to where it would only run 20-30 seconds before stalling and dieing. No partial choke needed, no more surging off choke, and no more stalling. Had to pull the jet and micro drill it just like you showed. It runs like new.

@pattayperformance 5 месяцев назад

RIGHT ON! Don't forget to change the oil and service the rest of the machine! DARE you to modify the impeller as well!

@kbohenry Год назад

Same here, cleared the first jet and now it is running great. Thank you!

@pattayperformance Год назад

Hopefully you are still in fix mode! Now is a great time to service the rest of the machine 🔧🤙🏻🦅🇺🇸

@user-lk2iw4rj3d 7 месяцев назад

Mine ran great until I put her away last February. Tried to start it yesterday and wouldn't start...and the gas smelled sour. I watched a couple RU-vid videos and did like I've done before. drained the fuel, ran cleaner through it, removed the carb and bowl and cleaned out everything as best I could. Put it all back together with good gas and she started up, but ran rough and even worse with the choke all the way off. Then I watched THIS video at (13:56 minutes) where you micro-drilled out the idle jet in that one black plastic screw and tried that. WOW! That worked amazing. Great call! Thanks!

@pattayperformance 5 месяцев назад

Great job! Don't forget to change the oil and service the rest of the machine! If you INSIST on leaving gas between season please use seafoam in your gas. Your tank is metal...I don't believe you should be leaving gas between seasons.

@TheSidikRam 7 месяцев назад

I managed to get mine started by quick & dirty going up the keister with a bread-clip wire & spraying carb cleaner up there (not sure if I was supposed to do that). I left some ethanol-free gas in the tank thinking it was ok - only to find it wouldn’t start. After going up the keister, I siphoned out the gas - added some 4-month old gas & Seafoam - and it started. I ran it for a while, it surges when going off choke, but runs. I’m gonna get some high end ethanol free gas and add more Seafoam, and hope that clears it up! I’ve barely used the thing.

@pattayperformance 5 месяцев назад

MCGUYVER! Surging is bc the idle circuit is plugged! That hole is WAY TOO TINY! try and clean it but I strongly suggest you open it up with a micro drill bit so it doesn't clog so easy. Please stop leaving gas in the machine between seasons. That is the reason why the machine is having issues. Even though it is barely used still needs to be serviced. Please change the oil and service the rest of the machine as well.

@geraldgallant4379 Год назад

Best video ever. Simplest solution, worked perfectly. THANKS SO MUCH !!!!!

@pattayperformance Год назад

GREAT FIX!

@chrisssmallengines7163 2 года назад

Great video , love that little ratchet that you are using . Small but still good power and speed .

@pattayperformance 2 года назад

You gotta get one of them!

@timscherfner849 2 года назад

Excellent instructions. My carb had dirt in it from using an older metal gas can. Cleaned out the jets and debris clogging them. Float bowl had bits of dirt in it and cleaned that up. Thank you very much.

@pattayperformance 2 года назад

If you haven’t already…now is a great time to change the oil and tune up the machine. I have videos on that as well! Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🇺🇸🦅🔧

@WallyGatorPitcher24 Год назад

Worked like a charm. 5 minute job. Thanks!!!

@pattayperformance Год назад

Great job! You work fast! 🔧🇺🇸🤙🏻🦅

@user-lu9ce5sz3k 8 месяцев назад

This worked for me. I imagine the plugged fuel tube is the cause of most engines that don't start. The wire I had was too thick and I ended up using a nylon bristle from a broom. I wouldn't recommend using anything that could break and get stuck. Also sprayed some carb cleaner into the hole.

@pattayperformance 5 месяцев назад

GREAT JOB MCGUYVER!

@davidkozak6854 2 года назад

My Cub Cadet is the 3X 26" . Bought it new last year. I forgot to run it completely out of gas and then drain the bowl. Would not start. Used the torch tip cleaner per instructions. It started first pull. Up the keister !

@pattayperformance 2 года назад

🤣🤣🤣🤣🤣 Just speaking my language to us common folks! Glad it worked out for you! Hopefully you are still in fix it mode! Now is a great time to service the rest of the machine! Thanks for the view and comment, hopefully you gave the video a thumbs up to help others and subscribed to my channel 🤙🏻🔧🇺🇸🦅

@jpmala56 Год назад

Thanks a bunch Sir. First you video is crystal clear. No shakiness with camera, and explained / showed everything as simplistic can be. You would make a great small engine instructor. I have this same machine bought it last yr, and could not understand why it was not starting since I always 93 octane with stabilizer additive in all my small engine machines. I decided to see on youtube if there was any how to videos about this and found yours. I was also going to have the store pick up my unit, but am tired of paying them for a pick up fee. When you buy expensive lawn and garden equipment from a place they should not charge a customer a pick up fee cause being a business they get tax right offs their trucks anyway I still believe. I know mine was still under warranty, but did not want to pay that stupid pick up fee. Thanks again.

@pattayperformance Год назад

Even though your machine is still covered under warranty, this repair isn't. It is not the machine's fault you didn't run it out of fuel. Businesses can still write off their trucks to a certain extent. Nothing is free... Cost of Truck Insurance Fuel Maintenance Repairs Paying Employee to pick up and drop off We don't offer Free P/U and Del Either. We start at $25 and up. that fee hasn't changed in all the years of doing this. It is due for increase but trying our best to keep things consistent since NOTHING is promised with the current times.

@wileyblog2679 2 года назад

Just fixed my blower using your first instructions! Saved me so much time and money. Thank you very much!!!!

@pattayperformance 2 года назад

Now is a great time to change the oil and service the machine! I have videos on that as well! Thanks for the view and comment, hopefully you subscribed to my channel🔧🦅🇺🇸🤙🏻

@chrismartinez2748 2 года назад

Great video just now did this and it worked like a charm my neighbor was going to send it to get fixed guy wanted 150 dollars and a full week took me less than 10 mins thank you.

@pattayperformance Год назад

GREAT JOB! Hope your neighbor treats you well! 🔧🇺🇸🦅🤙🏻

@BKAlexander53 2 года назад

Thanks for this, super helpful!

@pattayperformance 2 года назад

Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🔧🇺🇸

@BIGGBULLxxx 2 года назад

thanks for this great video it will help a lot of folks .

@pattayperformance 2 года назад

Yes sir! Hope all is well on your end! 🔧🦅🇺🇸🤙🏻

@toddster772008 Год назад

New sub here. Have the same machine, I didn’t know about the jet under that idle screw, now it’s running like a champ. Thanks for the video👍🏼✌️

@pattayperformance Год назад

Rockstar! Hopefully you are still in fix it mode! Now is a great time to service the rest of the machine🤙🏻🦅🔧🇺🇸

@joevandenberg4663 Год назад

Got a brand new cub cadet snow blower last year and it worked great. This year I got it to start but it would stall immediately when I went to use the auger and I was pretty disappointed as it’s near new. I then used a Christmas ornament wire and did the quick and dirty trick! Worked like a charm after! Thank you!

@samacquista3629 Год назад

I have a Cub Cadet I just bought for 2019. I have learned. Make sure every drop of gas is out of that engine at season’s end. And to change the oil every year. This video worked like a charm. I fixed mine like 2 hrs ago. This guy probably saved us $150 to $200.

@pattayperformance Год назад

Great job! Now is a great time to service the rest of the machine 🔧🤙🏻🦅🇺🇸

@pattayperformance Год назад

@@samacquista3629 right on! 🔧🇺🇸🦅🤙🏻

@flembag32 Год назад

Great vid Sir,,, thank you very much you’ve helped me greatly 👍 I miss my Troy

@pattayperformance Год назад

Anytime!

@jaysun14 2 года назад

Thank you so much for making this video you helped me fix my snow blower

@pattayperformance Год назад

These videos mean nothing with out people like yourself who take the initiative to DIY! 🇺🇸🔧🤙🏻🦅🫡

@sidhuamanz Год назад

Thanks for detailed video,

@pattayperformance Год назад

ANYTIME! Thanks for the view and comment!

@danielvalentini4168 2 года назад

Thank you for the tip, I fixed my new snowblower! Thanks ,thanks thanks!

@pattayperformance 2 года назад

I’m sorry I’m late to responding. RU-vid never sent me a notification. Glad you got your machine sorted out! Thanks for the view and comment, hopefully you gave the video a thumbs up to help others and subscribed to my channel 🤙🏻🔧🇺🇸🦅

@coolmandan4996 Год назад

That worked perfect all though I didn’t have that thin wire you used I stripped the paper off a bread tie and it worked perfectly thanks

@pattayperformance Год назад

Awesome! Hopefully you are still in fix it mode! Now is a great time to service the machine as well! 🔧🇺🇸🤙🏻🦅

@beerme_2 2 года назад

Jason...Enjoyed the video I was swapping machines by prepping my summer lawn equipment for winter storage I pulled out my snowblower started without issue but it ran poorly.. I use fuel stabilizer and run all my gas powered machines dry before storage and year after year they run like a champ except the snowblower. I know I can clean the carb and I will but I went ahead and bought a new carb along with the fuel shut valve that has falied on this machine.. I dont seem to have much luck with this light use blower. it looks brand new.. I am going to try something different going forward and buy non ethenol fuel for all my small engines see if that makes any difference.. Stay Safe!

@pattayperformance 2 года назад

Wait…did you try and drill out idle circuit? That could have been your issue. Nothing wrong with NEW and it’s not going to break the bank either. I know you ordered new…did you drop the bowl yet. Curious to what it looks like on the inside. Send me photos and vids on Instagram 😉

@JpJp-zd7vu 2 года назад

Another great video & useful Tip ! This trick works wonders when there's a low spd jet.When you have a carbs w/out a low spd jet what can you do. I have a powemax rt now w a Briggs...Surging..& no low spd jet. I've soaked the carb over nt in Gunk Parts cleaner to no avail. Surge isn't terrible , but still there. Also putting an ultrasonic on order in nxt few days.

@pattayperformance 2 года назад

Unfortunately it’s time to replace they all can’t be saved

@Turningwrenches85 2 года назад

Another one fixed . Right in the keister

@pattayperformance 2 года назад

🇺🇸🤙🏻🦅🔧 Hope you are doing well with the Holidays and stuff

@Turningwrenches85 2 года назад

@@pattayperformance been dealing with work that time of year at wally world and trying to get some content lined up at the same time.

@Turningwrenches85 2 года назад

been dealing with work that time of year at wally world and trying to get some content lined up at the same time.

@KhmerUSA999 2 года назад

I have a brand new one I just bought it last year and have the same problem so I just fix it today with friend. anyway great video thanks.

@pattayperformance 2 года назад

AWESOME! Hopefully you are still in fix it mode! Now is a great time to change the oil and service the rest of machine! Thanks for the view and comment, hopefully you gave the video a thumbs up to help others and subscribed to my channel 🤙🏻🔧🇺🇸🦅

@KhmerUSA999 2 года назад

I subscribe you for great job thanks again.

@samacquista3629 Год назад

Good instructions. I did the short-cut injector clean out you first showed. And it worked. It’s running rough at times in idle. Like is snaps and pops. But a went from no start for 3 days to blowing out my entire driveway and sidewalks. You think an additive can clear that up? I also changed my oil to that Purple your recommended. Thanks for the video!

@pattayperformance Год назад

Yes run seafoam in every tank and see if it clears up on its own. Seafoam is petroleum based so you can never add to much.

@user-zz3ks7ib2m 7 месяцев назад

Donny I was a sucker and went with CC 3x blower. Is there a kit to remove the 3x to a 2x?

@pattayperformance 7 месяцев назад

No but just modify the impeller and report back after your first snow fall.

@user-zz3ks7ib2m 7 месяцев назад

@@pattayperformance Modify how?

@pattayperformance 7 месяцев назад

@@user-zz3ks7ib2m ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b_iThLXWsl4.htmlsi=4ClkCiKff4tZ1-GG

@hokiedoo 2 года назад

Ok,I have a cub cadet like this one,last winter I couldn't get it to start,I followed your video last year on how to clear the jet thru the float blow,it worked like a charm!!!....now this year its reving up and down worce when the choke is totally off...should I just try and clean that jet again like last year? Thank John

@pattayperformance 2 года назад

So sorry I missed this. Yes do this! It will work!

@jumperg1 2 года назад

What size tip?

@pattayperformance 2 года назад

You can use anything from a Christmas Ornament Hook, Bread Twisty Tie to a thin piece of wire. I do have in the link of the description a link to a really cheap kit if you can wait (snow isnt on the way) Thanks for the view and comment, hopefully you subscribed to my channel.

@craigchiddo2794 2 года назад

You gave it an enema

@pattayperformance 2 года назад

This machine gave me one from start to finish

@dennisprah223 2 года назад

I had that exact same problem. I added some Sea Foam. I got it started, and let it run with the choke partially on for several minutes. I turned the choke off, and it has ran great ever since . What do you think was then problem. I thought gas line freeze?

@pattayperformance 2 года назад

You need to clean the idle circuit jet but while it’s out just open it up to the next size. In the description of the video is a link for micro drill bits. Thanks for the view and comment, hopefully you subscribed to my channel. 🇺🇸🔧🦅🤙🏻

@2Lalo48 Год назад

I just did this to my snowblower and it still won’t stay running with no choke

@pattayperformance Год назад

What did you exactly do…

@davidgoodman3545 3 месяца назад

you're links don't link, fyi

@pattayperformance 3 месяца назад

Appreciate that so much! I updated them!

@skiprope536 Год назад

Bro you gotta work out. Stay way from the sweets and carbs . Cub cadet/mtd blowers such in anything other than powder.

@pattayperformance Год назад

Agree with the first statement. Not so much on second one. Any machine beats shoveling. Modify the impeller as I’ve shown on my channel and it will turn your cheap blower into a nice high end ariens

@robertwadas Год назад

I did everything every video told me to do.. I then replaced the carb... Starts, runs at most 30 seconds... I pulled the gas tank off and the nipple that connects to the fuel line has a filter on it.. I cleaned the filter and it running at 100%

@pattayperformance Год назад

Awesome job! You really must use some janky fuel!

@DrewRobertson1 2 месяца назад

step 1: sell the pos and get a blower where the carb and plug is accessible.

@pattayperformance 2 месяца назад

It is accessible

@DrewRobertson1 2 месяца назад

@@pattayperformance compare it to a flathead and try to tell me that again.

@RH-qk5lt 2 года назад

I've got the same snowblower that isn't getting fuel. I've had the cover off, drained the gas, checked for spark, sprayed starting fluid in the spark plug and it started on first pull then died. If I don't have a torch cleaning tip, what would you think, diameter wise that would fit ?

@pattayperformance 2 года назад

Do you have a Christmas Ornament Hook or bread twisty tie? Just use the links in the description to buy the tools they are too cheap not to have. Thanks for the view and comment, hopefully you subscribed to my channel!

@RH-qk5lt 2 года назад

@@pattayperformance That's exactly what I used. A paper clip is to big but the Christmas tree ornament wire did the trick. It started on the first pull. But I'm going to have to drill out the port like you showed too. This is one of the more helpful youtube videos I've seen in awhile. Big thanks for taking the time and effort to post it !!

@pattayperformance 2 года назад

@@RH-qk5lt you’re welcome! I’m in the hospital right now…posts like these keeps my spirits up! Great job on the fix 🇺🇸🔧🤙🏻🦅

@RH-qk5lt 2 года назад

@@pattayperformance Well... that's a terrible place to be and also the best place to be at times. I've found if ya mess with the nurses every chance ya get it helps to keep yourself in good spirits! Quick recovery to ya and thanks again for the long distance help.

@samacquista3629 Год назад

6lb test fishing line worked for me

@tubetop123 Год назад

I think I have two exact same snowblower. Mine does not start I pull out the spark plug and cleaned up black stuff. Then it starts. Great. But a few minutes later,when I try to start it again it does not. I look at the spark plug it has a little bit of black, I clean again, and then after a few pulls, it starts. What could be the issue here? It should start whenever i pull it right? Shouldn't need to clean a plug each time

@pattayperformance Год назад

No but I think maybe switch out the factory torch plug to an NGK/Champion Equivalent. My suggestion is with new plug…problem still persists…pull plug without cleaning to confirm it’s sparking. Carbon build up on a spark plug could be Weak ignition (failing coil) Carb is over fueling Heat range (spark plug related) Start with a new plug and keep me updated 🤙🏻🦅🔧🇺🇸

@tubetop123 Год назад

@@pattayperformance thanks! Actually that's exactly what I did. End of last year, I bought a Champion spark plug and it started right away. Then next time I tried (after snow storm came) it wouldn't start. I gave up Then winter was over. So I drained the gas and ran it until it stopped itself. A few days ago, tried to start it for the first time this winter, that's when my situation (above) happened. I just changed the oil (black looking) to fresh oil. Cleaned the Champion spark plug , but I didn't want to try it because seems like the first try works then subsequently won't. So I am waiting for the next snow fall, to try to start it (when I really need it) I also bought a new NGK spark plug as a spare. Ready to go. Black deposited on the spark plug is burning too rich ? I read. How do I prevent that?

@pattayperformance Год назад

@@tubetop123 rich condition is unburnt fuel… Carb related Weak ignition coil

@tubetop123 Год назад

@@pattayperformance what's the solution? Clean out carborator? What else

@pattayperformance Год назад

@@tubetop123 over fuel could be a defective carb… It’s a Honda style so it’s really not rebuildable/workable. I would replace it Unfortunately I’m partially color blind so I can’t check for weak spark until my wife comes home. For the most part I don’t bother her bc parts are cheap and just replace the coil.

@TheIronDuke502 2 года назад

Hello Jason, I was curious as to what weight Royal Purple oil that you use for your small engine stuff. Most of all the truck & tractor pullers within this area also use the Royal Purple oil for their very high dollar engines.

@pattayperformance 2 года назад

5w-30!

@TheIronDuke502 2 года назад

@@pattayperformance Looks like here locally that a quart of 5w30 Royal Purple is around $10.99 at Advance Auto Parts/Carquest. The 5 quart container is $39.99.

@chrissmith4020 2 года назад

my 0-ring is not attached to the bowl like in this video.... what should i use to get it to stay because it's impossible to put the bowl back on with the ring in place if it's not attached

@pattayperformance 2 года назад

Another gasket but at this point just order a new carb for less than $20 and install it or use it for parts

@chrissmith4020 2 года назад

@@pattayperformancePerformance.. its brand new

@chrissmith4020 2 года назад

@@pattayperformance same exact blower as in the vid literally used it once

@pattayperformance 2 года назад

@@chrissmith4020 I understand that but a rebuild kit costs more than a carb.

@pattayperformance 2 года назад

@@chrissmith4020 I understand that…rebuild kit costs more than a brand new carb. You are better off buying a new carb and using it for parts. Keep that carb on the shelf sure if will come in handy. Do as you please but I’m telling dollars and sense!

@douglasbuck8986 2 года назад

WTF IS THERE NO FUEL FILTER ASSY???????????????????

@pattayperformance 2 года назад

Built into the tank

@bryanthegamer0198 2 года назад

Today my father and I tried to start our snowblower. It is the exact same model as yours, we did what you showed, but it still won't start! Do you know why? Edit: Now it somewhat starts, the light turns on to full beam, but then after 2 seconds it just turns off. Is it because the oil is too old?

@pattayperformance 2 года назад

Confirm the key is in… Did you try any diagnostic steps? What were they and what were the results? If not… Squirt starter fluid into the carb and try to start or pull the spark plug squirt starter fluid into the hole, install plug and try and start. If machine runs and dies, you have a fuel issue and need to clean the carb…must have missed a spot. Thanks for the view and comment, hopefully you subscribed to my channel🦅🔧🤙🏻🇺🇸

@pattayperformance 2 года назад

@@purplesocks9745 you can try…or just remove the spark plug spray starter fluid down the hole into the motor and reinstall the plug.

@pattayperformance 2 года назад

@@purplesocks9745 don’t forget a thumbs on the video. Helps out when others are in need. Keep me updated about your machine! 🤙🏻🇺🇸🦅🔧

@pattayperformance 2 года назад

@@purplesocks9745 do you have Instagram?

@pattayperformance 2 года назад

@@purplesocks9745 shoot me an email jp12ny@aol.com

@joshastana849 2 года назад

You don’t need to take off The whole housing. You can remove the emulsion tube and clean it without doing all that.

@pattayperformance 2 года назад

Thanks for informing us that you didn’t watch the whole video 🤣🤣🤣 If you did you would understand why 🤣🤣🤣🤣

@joshastana849 2 года назад

@@pattayperformance I did. You showed how to remove it with the carburetor removed from the machine. The point I was trying to make is that you don’t need to remove the carburetor to clean the tube. That’s all I was pointing out.

@pattayperformance 2 года назад

@@joshastana849 you didn’t watch the whole video. Thanks for stopping by

@joshastana849 2 года назад

@@pattayperformance lol ok 👌

@drelsan Год назад

🤣 Under Biden's America, as if the Prez controls the price of gas .. (any Prez btw ... they do not). Other than that very good vid since it covers more than just the simple carb clean.

@pattayperformance Год назад

Well don’t we just love the hypocrisy of the left… ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UzWQaNwZ6bE.html Thanks for the view and compliments!

@MrPeterMerkin Год назад

Stick to your trade videos. Stay away from the politics. It'll do you no good.

@pattayperformance Год назад

@@MrPeterMerkin thanks for the advice but I just like calling out the hypocrisy of the left. See how he disappeared🤣

@MrPeterMerkin Год назад

@@pattayperformance Hypocrisy exists on both sides and can be pointed out at any moment. Just stick to your game bro. Leave the payed shills out of your life.

@pattayperformance Год назад

@@MrPeterMerkin Life wasn’t so bad under the previous regime. No side is perfect…these people are delusional and can’t admit no fault.