Probably one of the creepiest videos I’ve seen in a long time. Why the goose down? But I’ll try this in the morning, a different take on this issue for sure.
Hey, I have a similar problem, HP Prodesk doesn't power on, when I press the power button it turns on a light .... That same light switches off after I release the power button but PC doesn't piwerup
In that case First unplug ram and clean it then plug it (if didn't work) Then power supply or motherboard is damaged or hdd is corrupted, then you need a pc technician for that
Video card, dirty ram, or motherboard itself, could contribute the problem. The easy way to figure out problem is, unplug attached devices one by one, clean the ram slots, blow out the dust, etc.
My pc turns on and everything but it doesn’t show on the monitor, it isn’t the display adapter because I tried it on a different pc. The fans in my pc turns on along with everything else but nothing appears and the monitor says that the vga cable isn’t there
Looks like yours is not a power problem. Probably need to check on video and PCI bus. HP p6228p motherboard has video, PCI bus, and/or power switch control issues. These issues could cause PC won't start.
My HP pavilion turns on, but the monitor doesn't. The power light on the monitor doesn't turn on and the monitor continues to be blank if I try to turn it on. I've tried three different cords (the ones with the screw things on the sides that needed to be tightened into the computer), and none of them fixed the problem. I can't find anything helpful when I look up how to fix it.
@@mkmllrc video card is on motherboard, it's integrated GeForce 9100 video card. It looks like RAM has problem. Make sure the RAM chips attach firmly on slots. You should hear click when RAM chips plugin firmly.
SciTechPrelude now I have a problem where when I was playing my game, then my monitor Turned yellow. Then I force shut down my pc and then the fans and light on the power button is flickering, by the way my pc is the HP Pavillion Desktop 570-p054 pls help I’m so confused what happened.
Sir my hp computer won’t turn on and when it does the fun just spins. When I try changing the ram it turns on but moves slow.can you please help me out
Details of ram requirements: Dual channel memory architecture Four DDR2 SO-DIMM (240-pin) sockets Supported DIMM types: PC2-6400 (800 MHz) PC2-5300 (667 MHz) Non-ECC memory only, unbuffered Supports 4GB DDR2 DIMMs Supports up to 16 GB on 64-bit PCs Supports up to 4 GB* on 32-bit PCs 32 bit PCs cannot address a full 4.0 GB of memory.
I have the hp pavilion and it cuts on, but sometimes its a orange led on the power button and a beeping sound or no led at all, but the fans spin, and I can’t cut it back off through the button, i have to unplug the pc for it to cut off, and theres no display on the monitor, what can i do to fix it, i need it fixed by Christmas
It could be the videos card problem. Since most of the HP pavilion PC has video integrated on motherboard, you may try take the approach as this video shown, see if the problem can be fixed. If not, then the on board video card is dead.
Yeah, the problem shown in this video could be related to probably the one defect in motherboard design in certain model(s). That's why some have the problems fixed, but others don't.