HOW TO FIX PC CONTROLLER INPUT LAG | 0 INPUT DELAY 

Bro this is exactly what Im using it for do you have anything else you discovered that will help since its been three years since this comment lol

My thing shows red and doesn’t install service how do I fix?

@@micahstallings6983 same problem

@@micahstallings6983I can't be positive, but I think you have to disable windows secure boot in your BIOS.

maybe windows secure boot in bios@@cameronwingrove7963

did you plug in the remote and then connect using bluetooth?

What do I revert the changes made to the controller back to go back to normal

same problem

Wait does it actually work or is it a vires

@@marrr2636 it actually worked, no hacking or any virus is involved, it worked perfectly fine for me, you could always delete the software or do a windows virus scan, but it works great for my ps5 controller.

Help me bro, ds4 ruins my game sens but when I’m on wireless it works perfectly

@@royal_fn1388 idk how to help, i dont play controller anymore and i havent used ds4 in a while ;-;

Did it need to be installed or what ?

@Steve Fox definitely can, although I cant tell the difference between 100 to 120 and 120 to 144 so I usually keep my monitor at 100 hertz even though it has a max refresh rate of 144

@Steve Fox for sure

i wouldnt say blue tooth is better than wired, and it is very easy to notice an 8ms difference when you have thousands of hours put into one game with a controller

@@dereksevcik6595 I didn't say 8ms, I said 2 to 2.8 or 0 to 2, also there is less latency over bluetooth for some odd reason.

@@gaminganecdotes6116 I know what you said, but I dont get why. The thing is, when you OC your ds4 controller you get 7ms less latency, combine that with a third party controller software and you get an extra 1ms. Also, your latency variation is significantly decreased with wired which is why wired is better over BT even if it has slightly higher latency

I believe it does, but iirc rocket science mentioned that the delay was quite small 1-2 ms

my device doesn’t function anymore 🙂

I have the same problem...Have you solved?

same

did anyone figure this out?

Same

How do yk

What?

There is a little box about filters

Did it work for you?

how did you measure the improvement?

it really worked?

RedGaming23 ds4windows

Hey are u using usb or wired?

@ZeroV whats the difference between usb and wired

Exactly it doesn’t work anymore it used to work back then a while ago

@A Big Lion not for me

You have to turn off Safe Boot

Wait rly?

What games do u play cus mine doesnt work on all the games

@@deonyt932 Yes it is worth doing if you play wired controller on pc. It only took a couple minutes to set up

@@deonyt932 Fortnite

@@TonyRomoforMVP but at the 2.55 min my controller doesnt show up do u know up

When you just opened setup program, you have to instantly install driver for your Controller (Xbox, PS, or any others). Otherwise, all of you actions, that you've done before installing driver, will lead to red connection.

Does it work well with the ps3 controller?

Thanks dude💯👍

same problem i get an error everytime i chose filter

@@spertalisT1 i have the solution

timer is only for keyboard and mouse player

im controller on pc so i should use this?

I mean yah only pc players can use this

Diego Parker false, timer res lowers controller input lag

@@cg-wo4ik really?

Bruh I’m getting .45 ms 😂

@@callmeghst6542 How are you testing your input lag?

U can get much lower with ps controllers through overclocking

Connected

HeavenlySoft same

same its not working u cant get ur controller better with and app if usee his controller already says 1 so yeah...

DxY_ i hope someone answers

@@elvarfn2086 i asked the guy who made the video an he said he just do the steps in the video so iguess you dont have to open it in the backround

@@dxy_6423 If its closed it doesnt change anything

there was no reason to use this on anything that isnt using usb, this is an overclock for the polling rates that are sent over usb, for example the dualshock4 pollrate is 250hz over usb, the tool in this video amps that up to 1000hz (a standard number for gaming peripherals on pc), bluetooth was never using 250hz

it didnt cause a virus tho right ?

@@000jacc It's not a virus, who the fuck told you that?

@@SlayzzFPS chill bro he was assuming cuz it sketch asf

@@jonah8667 have you tried it yet?

@@000jacc have you tried it yet?

same here

For me too

get a thin stick like a paper clip or something and turn around your controller and then you will see a little hole and just press it with the stick and hold for 3 seconds make sure it is plugged out

Did it really work?

@@wally_3057 yes mate

@@lions766 yeah

how do i disable secure boot?

Swrkyy search it up

vezi I did turn secure boot disabled but it still doesn’t works for me it says that the file is missing something and your controller would not work it does filter to 1000 but red line appears and controller doesn’t work. Can u help me I really want to reduce my inputs to 1 ms on my standard Xbox controller

everyone is saying that fucks up my pc is that true? anyone knows? for me worked fine but im worried about it

same

Just click reset and it would be fine.

It's because the cable you are using isn't good enough. I ran into this issue too. Not all micro usb are equal. ZedLabz 3M charging cable for Sony PS4 controllers. This is the one I got and I've been having 1ms delay (according to DS4 Windows) with absolutely no hitches. But if you want a quick solution go into control panel> devices and printers> right click the controller and remove device. Then simply unplug and plug back in the controller. Will reverse the overclock meaning your wire will work with it. However overclocking it again will mean it will work for a limited time. Then it will jump up in delay and even the slightest movement will cause the issue to happen again.

@@Haise888 are u saying that just buying the cable is enough? or do you need to buy the cable AND go through this process in the video? thanks

@Anthony Ban Both actually. Or at least just the process in the video. I'll try to walk through it right now. First, you need to download the application called DS4 windows. This is used to monitor the controller so you can see the delay on the controller. (the aim is to get it at a 1 ms delay. Additionally this software lets you use the controller in games that don't support the Dualshock as it is not native to windows (like the xbox controller is). This can be done under the setting "hide DS4 Windows" in fact I had to do this in order to get Sekiro to work (My camera was spinning around and it registered no other input) Next download the driver listed in the description. This is the overclocking tool. So basically just follow what he does at 1:30. Finally you should test if it works. Play with the overclock for about an hour. If you are noticing any issues (like the controller disconnecting from nudging the wire, or better yet, you can view the log under DS4 windows as it shows you if the delay on the controller spikes too high you'll also be able to notice the delay too. If this happens then buying ZedLabz 3M charging cable for Sony PS4 controller will work. Hope this helps anyone get some crisp TikTok dubz for fortknighter idk what its called. For me it's been permanent for half a year, again no issues. Sorry for the late reply. ytube is screwy

Well... That's worse.

@@estebanod he means 0.5 bruh, how its that worse

Yo like if I put my wire in keyboard and mouse of controller then do this it would work ?

I dont get what u r saying

some settings in ds4

Rahamabin7 really?

should I do it or no?

Same

Yeah anyone got a fix?

yes unfortunately increasing the poll rate to the max (1ms) is very very resource intensive, your system is struggling because the poll is too fast . The Dualshock 4 polls at 333mhz when utilized by ps4. you can try a faster rate but you shouldnt start at the fastest possible poll rate even if your system can handle it . Theres no decrease in latency on my DS4 that i can tell but my latency wasnt bad and usb is not the optimum interface . Its 5x faster on bt if correctly paired . P.S. The likelyhood of usb poll rate increasing performance on any controller not designed to run primarily from usb is not likely . Most modern controllers utilize a usb cable to sync and charge, while its possible for input to occur via usb, its not the default protocol . anytime u utilize a secondary relay for input it will cost u performance not gain u any .

Go to task manager and make so it's a start up I'm I'm guessing btw