How To Fix The Red Flashing Light Problem - Procolored DTF Printers

Подписаться 7 тыс.

Просмотров 22 тыс.

50% 1

Procolored September Promos: www.procolored...
Procolored Printer Packages:
A4 L800 DTF Printer: amzn.to/4eB6a4h
A4 L800 DTF Printer (Printer and Oven): amzn.to/3zuwlcA
A3 L1800 DTF Printer: amzn.to/3ziIPnH
A3 L1800 DTF Printer (Printer and Oven): amzn.to/45QTpOX
Ink For All Procolored DTF Printers (L1800, R1390, L805, L8058, XP600, TX800):
Procolored Ink Set CMYK and 1 White (500ml): amzn.to/3L3oAgh
Procolored Ink Set CMYK and 2 White (250ml): amzn.to/3W04muf
Procolored Ink Set CMYK and 2 White (500ml): amzn.to/3XHk4fa
Procolored White Ink (250ml): amzn.to/4eF7P8R
Procolored White Ink (500ml): amzn.to/3VGAemd
Film:
DTF Film Roll A3 (13 inch x 328 FT): amzn.to/4cCSUKp
DTF Glitter Film Roll A3 (11.8 inch x 328 FT): amzn.to/3WbK0hX
DTF Glow in the Dark Film Roll A3 (11.8 Inch x 328 FT): amzn.to/4eKbGkU
DTF Film Sheets A3 (100 Sheets): amzn.to/3VMaiFZ
DTF Film Sheets A4 (100 Sheets): amzn.to/3VMamFJ
Adhesive Powder:
DTF Adhesive Powder 500g (17.6oz): amzn.to/3RQDSJ9
➤ E-Mail: HaiandTerrie@gmail.com
MUSIC:
➤ Where we get our music (2 Months FREE): artlist.io/Ter...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, we’ll receive a small commission (at no additional cost to you). This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@HaiTech 11 месяцев назад

Procolored September Promos: www.procolored.com/pages/procolored-f8-gen-2-launch-event?ref=HaiandTerrie

28 дней назад

Thank you soooo much for taking the time to post this!!! Your videos are what motivated me to purchase this particular printer! All of the videos I have watched that you have posted have been VERY helpful. Thank you again!!!

@HaiTech 25 дней назад

You are so welcome!

@purplepacion 9 месяцев назад

Thank you! Lights came on after doing the easy head cleaning from not being used for almost a month. Followed these instructions....couldn't do a full flush, as it had not be 12 hours since the last one. No colors at 1st. Pulled ink from each line and drain lines...one more cleaning and it's back!

@HaiTech 9 месяцев назад

Great job!

@DankUrbanBoss 6 месяцев назад

thanks a million for this! I wish I could like your video 1 million times lol

@KayleeCabreraKeepingupwithKayy 7 месяцев назад

YOU ARE A REAL GOAT FOR THIS ONNEEE

@mandalynnecopeland3543 8 месяцев назад

Dude, you’re a lifesaver thanks

@danpower3170 4 месяца назад

you saved my ass dude, you are the MVP of the multiverse. Thank you !!

@HaiTech 4 месяца назад

don't you hate it when you have to fulfill a 1000 orders and then the blinking light of death comes on. glad i could help! thanks for stopping by

@ruffle.flares 6 месяцев назад

Thank you so much. I did exactly, and it fixed it. You are much appreciated 👏🏾 💐

@HaiTech 6 месяцев назад

nice work

@shalunda0809 7 месяцев назад

Thank you so much for this video! It fixed my machine 😊

@HaiTech 7 месяцев назад

amazing!

@edbutler4193 2 месяца назад

a life saver thanks bro, was giving me a headache

@eurokometd.o.o.1139 8 месяцев назад

Thank you! 🤩👑

@archiecarter6413 6 месяцев назад

Thank U My Bro For Your help

@HaiTech 6 месяцев назад

Always welcome

@bgbrd27 5 месяцев назад

Thank you for your reply it did fix the problem also is it normal for everyday I run the nozzle check and the white doesn’t show up until I do the head cleaning and the yellow is always very faint. I don’t know I just saw a RU-vid video that said you need to remove the transport lock on the machine but I haven’t found one or seen it in the mail as either so wanted to make sure I wasn’t missing something. Thanks again for your help

@HaiTech 5 месяцев назад

i would reach out to procolored support. get with their live support where you can talk with them face to face. show them the problem or send a video of the issue. it should be under support > warranty on their website. When I had my L1800 machine the yellow nozzle check didn't show up at all. it printed yellow perfectly, but for some reason it just wouldn't show up on the checks. when i would do a manual check by printing a CMYKW picture, it would print yellow fine. i never asked procolored why or looked into it.

@bonnieblocs5459 4 месяца назад

Thanks!

@HaiTech 4 месяца назад

thanks a lot!

@DeannKroll 10 месяцев назад

My two blinking lights will not go off. I keep getting an error code and it won't let me reset. Also, how do I unlock my printer head? It won't let me release it because the lights are still on. Any help would be greatly appreciated.Thanks

@HaiTech 10 месяцев назад

if you followed the instructions in my video and got an error when you tried to do a reset it should still correct the red blinking problem. turn your printer off completely (turn off front green button and the rear power button). wait 10 seconds and turn everything back on again. if you still have problems please reach out to Procolored. Email: afterservice@procolored.com Phone: +1 562 566 0518 Skype: charles@procolored.com

@tonycordovatc Месяц назад

Make sure your printer is on while your doing the whole process. And when you turn it off make sure you even flip the switch

@sheryhelendesigns 10 месяцев назад

Thank you!!!!

@HaiTech 10 месяцев назад

Welcome!

@craigrobinsonsr6853 3 месяца назад

Thank You! How many times can we do this?

@HaiTech 3 месяца назад

as many times as needed.

@FamiliaBlancoBueno 2 месяца назад

Thank you 👏

@dancepatty6764 6 месяцев назад

Hello! I barely had that problem and they helped me do all that because I didn't have the correct software, they entered my computer and they did everything for me, I am very happy and grateful for that, but now my printer doesn't print any color. 😟 I have no idea why. What should I do now? 😩

@HaiTech 6 месяцев назад

Your CMYK tab may have been turned off. i haven't came across the problem personally but i'm sure it's a simple fix. you may need to get with customer service

@MarilynAntoine-g2b 26 дней назад

I am getting the two flashing lights, I follow your instructions, its works, bir when I send a print job , the lights come back on again, can you help.

@HaiTech 26 дней назад

i would get in contact with Procolored support. www.procolored.com/pages/supports-and-services

@ThomasQ-f9y 7 месяцев назад

Hello, my friend. I had procolored l1800 printer, can you help me? If am not using it for a month what should i disconnect to protect my printer or print head to avoid ink bleeding when i start using it pls? Secondly, how many bulk of t shirts should be printed before cleaning the print head? What thing can i use to clean the print head? since i bought only 13 shirts been printed so far. Lastly, when i bought the printer they gave me nozzle protection fluid and some pump tubes. Can you help how to use them pls? Thank you.

@HaiTech 7 месяцев назад

this video may help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JO0q2EcLPjc.htmlsi=RHuDzSRGlKf4ZKcQ do a print head cleaning daily unless it's in vacation mode. if a print head cleaning via PRO RIP software is not cleaning the print then it requires a manual cleaning. you will need swabs and print head cleaning solution. both can be bought through procolored. do not use any alcohol solutions as it will dry the print head and damage it.

@bgbrd27 5 месяцев назад

Hi Iam wondering if you have had any issues with your nozzle print printing off the side of the film? Also where would the transport lock be? Thanks for any help

@HaiTech 5 месяцев назад

if you're printing off the side of your film, it may be your film size setting in the PRO RIP software. can you explain what a transport lock is?

@brandygomez6282 6 месяцев назад

Thank you for the video but what do I do if I'm missing drivers in order to access the ink pad settings in epson

@HaiTech 6 месяцев назад

Which printer do you have. Did you receive a white usb

@omaraywillis6991 9 дней назад

Hello. How could you reinstall the program back on your white USB if the firewall erases it?

@HaiTech 9 дней назад

contact procolored for the download link

@omaraywillis6991 21 день назад

Do you reset it with the white USB or the Blue USB?

@HaiTech 21 день назад

there's a software inside the white USB. it's called resetter. you have to turn off your antivirus software or it will delete that software. if you're missing the software, contact procolored and they can send you a download link

@jamesharris9709 3 месяца назад

Is there anyway to do this if I’ve not fully turned security off and tried opening the program?

@HaiTech 3 месяца назад

you can add the file as an exception without having to turn off the security completely

@nydiarivera00 9 месяцев назад

Hello! My lights are blinking. I tried to do these steps. I have a L1800 but my resetter is only 1390. Maybe that’s why?? Is there somewhere I can download the L1800 from?

@HaiTech 9 месяцев назад

there should be a resetter in your white USB drive.

@Tredoras День назад

Unfortunately the USB stick got extremely hot and no longer works. Is the program available to download somewhere? Or maybe the entire USB stick? My red lights flashes and i can´t use the printer :-(.

@HaiTech День назад

contact procolored for a download link. which USB is damage the white one or the blue one?

@Tredoras День назад

@@HaiTech The white one

@HaiTech 23 часа назад

@@Tredoras got it. yes procolored can send you a link to download all your drivers and software needed if the usb is damage or lost. Email: afterservice.us1@procolored.com

@TheTaktuk71 10 месяцев назад

hallo mein freund Hello my friend, I installed a new pump today and cleaned the old print head nicely. it worked well. new problem is I can't switch it on anymore. Power from the back comes on but the front one presses first but it doesn't switch on anymore, Print head and the print head seemed to be moving and no longer turned on please help me why it doesn't turn on now.

@HaiTech 10 месяцев назад

there must be a cable that was disconnected during the repair.

@MagaliMontalvo-s9u 18 дней назад

Hi can you tell me what "memory car loading error means"

@HaiTech 18 дней назад

i have not came across that error. contact procolored and send them a picture. they respond Monday-Fri

@erikalonzo6138 6 месяцев назад

hello when i click on resetter it wants me to extract all or run. When extracted it brings me to DTF R1390 CLEAR? When i select "RUN" nothing happens

@HaiTech 6 месяцев назад

It may be the wrong file. www.procolored.com/pages/warranty-policy scroll down to where it says “need additional help” and get on a video call with them. They’ll be able to walk you through and send you the correct file.

@LisaArcand-c1z 7 месяцев назад

I don't have that option maintenance and precautions on my USB

@HaiTech 7 месяцев назад

do you have a similar folder? check the other folders for that resetter software

@hopeholton1660 6 месяцев назад

What happens if you do that and it doesnt work?? I left for 2 days and came back andit was showing the 2 blinking lights again! Can you help??

@HaiTech 6 месяцев назад

What printer do you have

@hopeholton1660 6 месяцев назад

procolored L 1800 @@HaiTech

@lenaboyce5693 19 дней назад

I didn't get that program in my flash drive

@HaiTech 19 дней назад

you can contact procolored to get a download link

@daiyalize 11 месяцев назад

Hello would you know how to get the white ink circulation system to work being that it was previously installed on the white ink

@HaiTech 11 месяцев назад

Hi, my L1800 unit did not have the white ink circulation system so i'm not sure how it works.

@jesusarellano3737 5 месяцев назад

What happens if the maintenance and precautions folder is not there ?

@HaiTech 5 месяцев назад

contact procolored to get a download link for anything that's missing. I've had to do that once and they sent me a zip file with all the necessary software and drivers. to contact them go to the support tab > warranty > then look for need additional help

@jesusarellano3737 5 месяцев назад

Ok thanx on it. This will be the same for the L805 printer as well right ?

@HaiTech 5 месяцев назад

yes, except you'll choose the file for L805 instead of L1800

@EduardoCarmona-q2b 4 месяца назад

Hello I have a problem, in my machine only the ink light is flashing, someone knows why?

@HaiTech 4 месяца назад

have you tried their support? www.procolored.com/pages/supports-and-services

@alimanavarrete2967 10 месяцев назад

Hi what if it’s just the paper jam button keeps flashing?

@HaiTech 10 месяцев назад

when that happens to me i just turn the printer completely off (front green power button and rear power button) let it sit for 10 seconds and turn it all back on again. if this doesn't work then try the flashing red light solution in this video.

@CloudsValencia 10 месяцев назад

I have this problem too! I pulled out the paper, turned it off, waited for a lil bit, then turned it on again. & the light is still flashing.

@alimanavarrete2967 9 месяцев назад

@@CloudsValencia what did you do?

@brandongoist8655 10 месяцев назад

Mine won't go past the not responding screen...

@HaiTech 10 месяцев назад

which machine do you have?

@janeth3000vlgs 2 месяца назад

what happend if my computer delet the program ,what i can do ,pliss if you can help me

@janeth3000vlgs 2 месяца назад

@HaiTeck

@HaiTech 2 месяца назад

did you check to see if it was still on your flash drive? if it's not on the flash drive, contact Procolored and they will send you a link to re download it.

@janeth3000vlgs 2 месяца назад

@@HaiTech thank you 🙏

@LisaArcand-c1z 7 месяцев назад

Hi, My USB does not have that option "Maintenance and precaution" what else can Ido?

@HaiTech 7 месяцев назад

which model do you have?

@LisaArcand-c1z 7 месяцев назад

Punehod L1800

@HaiTech 7 месяцев назад

if you can not locate it on the white USB drive then Procolored can send you a download link for it. contact their support

@LisaArcand-c1z 7 месяцев назад

Thank you, I got in contact with them they are sending @@HaiTech

@magalycastro9114 11 месяцев назад

although I turned off the antivirus but for some reason, it turn on again and deleted that file. is there anything I can do thank you.

@HaiTech 11 месяцев назад

Procolored can send you the file again.

@ismailkaratas2562 7 месяцев назад

U have idea for Error Code 43? Thank u

@HaiTech 7 месяцев назад

did you update the Drivers? don't update the drivers. where do you see that code and what happens?

@ismailkaratas2562 7 месяцев назад

@@HaiTech its for Selling and the seller has it in description.downgrade of driver will fix it?

@ismailkaratas2562 7 месяцев назад

@@HaiTech As soon as he lowers the sled to the capping station, the error message appears.

@HaiTech 7 месяцев назад

i'm not sure. that's something you would need to chat or have a call with the procolored tech team

@kristabainbridge2605 9 месяцев назад

if it gets deleted how do i get the program back?

@HaiTech 9 месяцев назад

was it deleted off of the usb stick? www.procolored.com/pages/warranty-policy contact them. right under where it says "Need Additional Help? Contact Us" they can send it to you via google drive or drop box.

@sbgtf4ever 11 месяцев назад

What about just the ink light flashing? I replaced the ink head and now ink light is flashing. Please help!

@HaiTech 11 месяцев назад

did you try these steps to see if it would stop?

@sbgtf4ever 11 месяцев назад

@@HaiTech what steps?

@sbgtf4ever 11 месяцев назад

@@HaiTech my computer doesn’t recognize my printer to do these steps

@HaiTech 11 месяцев назад

Sorry, when i said "these steps" i meant the steps in the "how to fix the red flashing light" video above. you may need to reinstall the drivers if your PC is not recognizing the printer. the drivers are located in the white USB drive.

@ivorrajnarine7675 5 месяцев назад

I did all that but it didn't work, instead it shower a error code : 2100012C I have a procolor A4 printer

@HaiTech 5 месяцев назад

it could be the wrong resetter. I would contact them so they can pinpoint what it is exactly. do you have their contact info?

@ivorrajnarine7675 5 месяцев назад

@@HaiTech I'll try and contact them via the website

@HaiTech 5 месяцев назад

any update on this problem? did you get in contact with them?

@ivorrajnarine7675 5 месяцев назад

@@HaiTech I reached out and no, I was offered to remote expert service, so I'll try that and hopefully they can figure it out

@Raven22445 5 месяцев назад

i tired that and it didnt work

@HaiTech 5 месяцев назад

i would contact support and see exactly what the problem is. it could be something as simple as using the wrong resetter. if you go under support > warranty there's a contact info and SKYPE info for support. they're usually available after 6PM

@chakabd2205 2 месяца назад

Doesnt work 😢 i have the error message i turn it off and on but ☠️😵😵☠️

@HaiTech 2 месяца назад

could possibly be another issue. have you contacted Procolored Support? go to their website and at the top click support > resources

@chakabd2205 2 месяца назад

@@HaiTechit’s ok they send me a kind of software for a reset. Thank you for your answer !

@ryandinhotenacious3999 7 месяцев назад

That didn't work at all same thing light still flashing

@braithwaitegoat2645 5 месяцев назад

Hi did you ever find a soulution? mine continues to flash after doing this a few times

@lauraaldama9573 Месяц назад

I don’t have a reserter option 😭😭😭

@lauraaldama9573 Месяц назад

I have the L1800

@HaiTech Месяц назад

its usually in your white USB flash drive. if your antivirus deleted it or you are missing one then Procolored can send you the files to download. just give their support a call or email

@lauraaldama9573 Месяц назад

@@HaiTechthank you!

@lauraaldama9573 Месяц назад

@@HaiTechweird because I do have the flash drive. I disabled all the anti viruses too. McAfee as well

@HaiTech Месяц назад

just get in touch with them and you can just download the resetter.

@diananavarro5599 8 месяцев назад

Hi, I had that problem I did everything you said and didn’t work 😢. I took the software out and then I installed back but now it’s no reading the printer 🖨️😣. Would you be able to help me please..

@HaiTech 8 месяцев назад

they have a tech support contact info with live chat, or phone service here: www.procolored.com/pages/warranty-policy