Тёмный

How To Fix Your Leaking Snow Blower Carb - Briggs Or Tecumseh 

Steve's Small Engine Saloon
Подписаться 679 тыс.
Просмотров 152 тыс.
0% 0

Is your carburetor leaking or pouring fuel out of your carburetor on the air filter side or does it flood into your engine oil making the oil smell like gasoline? No matter what side it’s leaking from, it’s the same repair. Watch now to see how to easily stop your snow blower or snow thrower carb from leaking fuel.
This applies to almost all 4 stroke 4 cycle engines, with the float bowl on the bottom, on snow blowers, riding lawn mowers, walk behind lawn mowers, water pumps, generators, general purpose engines, etc.
This video ONLY deals with Briggs and Stratton or Tecumseh carburetors.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG
✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr
✅Click here for a new float ➜ amzn.to/33mAABy
For more videos like this, check out:
👉How To Fix Your Leaky Snow Blower Carb - Honda Style ➜ • How To Fix Your Leaky ...
👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ • Fastest Way To Tell If...
👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ • Here's Why Your Lawn M...
👉How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
🔧WELCOME to the Steve’s Small Engine Saloon RU-vid channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #troubleshooting #engine #lawnandgarden #lawnmower #lawnmowerrepair #mowerrepair #carburetor #carbreakdown #mower #Tecumseh #briggsandstratton #snowblowers

Хобби

Опубликовано:

 

23 ноя 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 438   
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG ✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr ✅Click here for a new float ➜ amzn.to/33mAABy For more videos like this, check out: 👉How To Fix Your Leaky Snow Blower Carb - Honda Style ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NTBlVTa_jDQ.html 👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3up57DHiCqs.html 👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tp67AzWNbI4.html 👉How To Adjust the RPM Speed on a Lawn Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7YrA3QEIFnE.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
@davidbabcock1231
@davidbabcock1231 2 года назад
Steve is there a Way that the fuel could be coming out of both sides?? The air cleaner side and the engine side?? I see the gas leaking from the snow blower but when I did an oil change on it it looked to have some gas in the oil. I’m not 100 percent sure if there was but the oil seemed very liquidy and not as thick as when I put it in and it also had a type of sheen to the oil. I’m not sure if it could be both.
@seanboulter9848
@seanboulter9848 9 месяцев назад
Steve, great video--loved the toilet analogy! It's the first time I've understood a carb float. Your link to the Tecumseh repair kit goes to an item that is unavailable though, FYI. Be great to get an updated working one!
@richardkenworthy9312
@richardkenworthy9312 6 месяцев назад
Do all tecumseh carbs take the same needle and seat kits
@greyes701
@greyes701 4 месяца назад
Would this cause oil out the exhaust?
@ryanmartin7522
@ryanmartin7522 3 года назад
Thank you for the fantastic tutorial, Steve! Great production with still, focused shots and thorough instructions!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Very welcome!
@dtomejr
@dtomejr 3 года назад
Glad to have found this video! I kept thinking it was a gasket issue! Installed all ne carb and back up and running. Also bought the needle and seat repair kit to fix the old one as a spare...
@keithpedersen2584
@keithpedersen2584 3 года назад
Thanks for the detailed video. Done well and professional! It was helpful even though I am working on a Toro1000. Leaking out this brass tube right next to the fuel intake. Thanks again!
@tsdelaney
@tsdelaney 4 года назад
Right on the money! Thank you as this is exactly why the carb on my Briggs a generator was leaking.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@francofavot6761
@francofavot6761 3 года назад
Great video Steve! Your demeanor is perfect and being an old school professional mechanic myself the explanation and repair process is on point. Two thumbs!!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Wow, thanks!
@Windgumby
@Windgumby 4 года назад
Grolsh works very well for me in this situation. Thanks.
@wildefox1478
@wildefox1478 4 года назад
Great carburetor repair video Steve, when I fix leaky carbs to test the needle and seat I just use my mouth to gently blow into where the fuel line connects to the carb.
@charleslarue7082
@charleslarue7082 4 года назад
I want to thank you Steve! I've used several of your videos to help fix so much of my equipment.. it's sad really. So thank you good sir, you've made some amazing videos. And as far as liquids to drink while doing repairs.. forget beer, captain and coke or jameson and 7up. you'll never mistake that smell for fuel or leftover fluids lol
@walterschilling4512
@walterschilling4512 3 года назад
Steve, your the best! Whenever I'm in doubt, I come to your channel to resolve the issue , Cheers.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Cool, thanks
@j.elliott4310
@j.elliott4310 7 месяцев назад
Steve!! You have a gift for teaching! Thank you for going into depth with your explanations and analogies. The close ups are so helpful. Excellent tutorial!! 🙂
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 месяцев назад
Wow, thank you!
@patrickhauser631
@patrickhauser631 Год назад
This vide was exactly what I needed to fix my snow blower carburetor. Thank you for posting this!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
You're Welcome...
@jeffreyrubish347
@jeffreyrubish347 4 года назад
I limped my 25 year old Toro along all last season. Too cold for my arthritic fingers to fix. This spring cleaned the jets and passages, runs great again.
@baddad5781
@baddad5781 3 года назад
Thanks, one of the best carb/float videos on youtube I've ever seen. Thats why I'm a subscriber.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Great to hear!
@gnic76
@gnic76 4 года назад
Thanks Steve, I had that problem with my snow blower two weeks ago, when I went to check it over at start of winter. Had gas in the oil, it leaked past the fuel line shut off valve and through carb. I was trying to figure out how it would have gotten into oil. Now I know.
@crbourret
@crbourret 4 года назад
I've been having that exact issue with the Briggs carb on my log splitter, thanks for this man!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@ilocke2007
@ilocke2007 3 года назад
great vid steve. I really appreciate the effort you put into showing exactly what you are talking about with the closeup shots. nice video work and editing.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Thank You...
@theajeff
@theajeff 4 года назад
Steve - you’re the greatest.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...
@fransiscoscaramanga674
@fransiscoscaramanga674 3 года назад
i have a troybuilt 5.5 h/p snowblower leaking fuel from carburetor..........very good video, very informative, i think i can tackle this project.. you made it simple to understand. good job brutha...
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Yes you can!
@derrickmcdonald7331
@derrickmcdonald7331 3 года назад
Not sure that’s what my problem is, but I enjoyed the video thoroughly! Very educational and entertaining! Appreciate you going the extra mile to help those of us guys who are NOT mechanically inclined! Thanks again!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Glad you enjoyed it!
@robc.5745
@robc.5745 2 года назад
I know this might a little late in the game , But I had that problem with a tiller and a tecumseh engine and had to replace the float , Then it worked perfect. Steve , Your the man !
@johnt890
@johnt890 4 года назад
Going to try on pressure washer this spring. Great tutorial
@carlw9009
@carlw9009 7 месяцев назад
Grolsch was my go to beer when I was younger. Now I can’t find it in my area, (greater Boston). No matter I gave up all alcohol for health reasons but I do find your video very informative. Only thing I didn’t know was how to make sure the float is level after making the repairs. That is much appreciated and thanks for sharing your experience and knowledge with us! 👍🏼😎👏
@johngabrielson1969
@johngabrielson1969 3 года назад
Thanks -- So that float is how the gas is controlled. Nice and clear now.
@larry851
@larry851 4 года назад
Great information my snow blower been leaking every time I prime it. I'm going to order the parts and a six pack of those special carburetor beers.
@howardkoster4026
@howardkoster4026 4 года назад
Ahhh...I had an old Sears lawn vac with a Clinton engine on it that flooded a lot towards the end. I junked it because of that, and a lot of other issues it had. The chassis were the engine bolted on had broken away, so the engine was only holding on by one bolt..GREAT VIDEO!!!!
@RobKeenan826
@RobKeenan826 4 года назад
Now I know Google is listening to me, was talking about leaky carb on my blower, this comes on recommendations. Thanks for posting
@gordonwright1602
@gordonwright1602 4 года назад
Hi Steve, I also like my beer and to work on small engines,you are a great help to me and I admire you for your knowledge about whatever it is that you might be working on. Please keep the great videos headed my way.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Right on Gordo...
@georgetaylor8535
@georgetaylor8535 4 года назад
Steve your always full of great small engine knowledge. I watch all of your videos they're great. You and your wife are an awesome team on making these video's. Thanks you guys i learn something from every video.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...and You're Welcome...
@khalidromman1702
@khalidromman1702 9 месяцев назад
thank you, I had the leak all over the snow blower. I would go and change the carburetor.
@nickz8632
@nickz8632 Год назад
Wow, this fixed my issue on a 15yr old snowblower that had a discontinued carb. I didn’t want to have to buy an updated carb and deal with all the things that I could see that were different. Cleaned a popped these new little bad boys in and pow, everything is 100%. This vid was sooooo helpful, Ty Steve! Help us regular foke fix like the pro’s
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
Great job!
@jmartin897
@jmartin897 2 месяца назад
For my first carburetor job I did Eagle Rare bourbon neat. Nothing against beer, I love beer, I just like to drink the good stuff when I can find an excuse to hang out in my shed and work on stuff at my own pace.
@Catttrain
@Catttrain 4 года назад
I had this issue with my riding mower. Although I didn't realize at the time this was the exact same problem, I did get a carb kit and replaced all the little bits like this and that did fix it. Thanks Steve for so many great videos.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@369SkinneR
@369SkinneR Год назад
[Québec, Canada] I already understand the concept of a float and seat.. but the way you explained it gave me way more insight and less guessing of what does what. TY. Im subscribing to your channel Awesome video
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
Great to hear!
@paulstir
@paulstir 4 года назад
Steve Scotland loves you for your videos , as a noob to small engines the toilet explanation has helped me understand how the mechanics of the carb works ( forever great full for you sharing your knowledge 👌)
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Right on Paul! Thank You...
@paulstir
@paulstir 4 года назад
Your welcome Steve , keep the vids coming 👍 , thank you
@geyser3445
@geyser3445 2 года назад
Was working on snowblower and felt something was wrong with the seat. Really didn't think using a compressor would blow out the seat but it worked like charms. Thanks.
@raywalz4952
@raywalz4952 4 года назад
Saturated float...In 1976..on a 73 ChevVan...plastic coated opencell foam float in a Qjet 4barrel.. took apart twice...still flooded...third time noticed float was heavier than normal...replaced with used one from parts stash...set up level..reassembled...ran better than new. Thank goodness the hollow plastic floats that are used in small engines are better quality today. Best to you and yours.
@neilcrompton3488
@neilcrompton3488 4 года назад
Seems like a easy fix @steves small engine saloon keep up the good work,your teaching style is easy to follow & no nonsense or bs brilliant 😉😉
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...
@malcolm.cfittis1062
@malcolm.cfittis1062 2 года назад
That was the easiest explanation, hands down. Its been a long time since I was in high school ( where I learned small engine repair) your video shook lose that information. I personally like to repair with Maclays ale .........works every time.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Glad it helped!
@liujw0able
@liujw0able 2 года назад
Thank you Steve for this great video, especially the part you explained with toilet flushing. After understanding how the float and needle works, I was able to pinpoint the mistake I made last time after I cleaned carb. The floater was upside down (yah, stupid). As soon as I put it back and tested it, the snowblower is not leaking gas anymore.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Glad it was helpful!
@bruceburton3515
@bruceburton3515 4 года назад
Good job Steve. I have used a small self tapping screw to remove the plastic seat. Just scew it in gently with fingers only until it feels tight and remove the seat with rhe screw. I think the Grolsch is an excellent choice for this job. Cheers!
@brianmontello9074
@brianmontello9074 3 года назад
Thank you! I rebuilt the carb on my 5hp Tecumseh about a week ago. I initially thought all went well and it started right up on 1 pull. 1 week after storing it I noticed a fuel smell in the garage and a puddle of gas. After watching your video I pulled it apart and checked the brass float. Sure enough it was filled with gas. I replaced the float and reassembled and no leak. It runs better than it has in at least 5 years. Great video. Thanks Brian.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Great to hear!
@ronsilva516
@ronsilva516 4 года назад
Extent info just the key I was looking for my snow blower doing just that! It’s a Tecumseh engine on it . Thank you so so much for putting this info out now As for beer I think blue moon or shock top will do !😁😁😁😁
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Right on Ron...
@tomschisler1545
@tomschisler1545 4 года назад
Great information as always. i find keystone by Coors always makes these jobs easier. thanks steve
@user-mb6gs3xm7b
@user-mb6gs3xm7b 4 года назад
Steve, i have a crafsman as secondary, bought used, always leaking, i will tackle next spring. Thanks all info. Happy holidays... Newburgh N.Y.
@eilertvonaswegen1958
@eilertvonaswegen1958 4 года назад
Hi Steve, My Makuni carb on an fb460v as22 is similar to the one you repaired. I removed all components, cleaned cleaned everthing, assembled it and in the end, I could not get fuel into the bowl. I'll get a Het Anker Ambrio from the fridge and go and check everything again, following your guidelines. Thanks for your great video. NEVER let your camera-man go! Greetings from your Belgian fan.
@rawkinrobn
@rawkinrobn Год назад
I am absolutely horrible with engines. You have saved me so many times it embarrassing. Thank you
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
You're Welcome...
@davidrobbins1172
@davidrobbins1172 2 года назад
Probably the best video I have seen bar none on small engine repair. If my knowledge of engine repair was dynamite you could not blow your nose with it and I understood every bit of that video. Thank you so much.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Wow, thanks!
@kwedtc
@kwedtc 2 месяца назад
Thanks Steve, my snow blower has that problem, going to fix it.........Now it"s fixed.👍👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 месяца назад
Excellent!
@robertnick6403
@robertnick6403 2 года назад
Thanks Steve
@dufreebell
@dufreebell 3 года назад
Thanks a ton for this informative video. Instructions are crystal clear and useful.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Glad it was helpful!
@BearE9090
@BearE9090 4 года назад
Great video. Carbs & OV gets the job done for me.
@superdaddio3583
@superdaddio3583 4 года назад
Thank you, that is exactly my symptom.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@roygiehtbrock9124
@roygiehtbrock9124 3 года назад
I normally stay away from task like these! But your video makes it look easy. I found the information on how to order the needle and seat. Thanks for your help.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
You are so welcome!
@roygiehtbrock9124
@roygiehtbrock9124 3 года назад
@@StevesSmallEngineSaloon well today I took off the carburetor and found that I have the brass float HMMM Then I couldn't find the hole on the underside to blow out the seat you talked about so I put it all back together. So it wasn't as easy as you made it to look like. HMMM I'M STUMPED
@arthurfricchione8119
@arthurfricchione8119 4 года назад
Great video Steve. Have two carbs to do that on. Thanks much. 👍👍👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@michaelgoostree4177
@michaelgoostree4177 7 месяцев назад
Perfect video. Exactly what I needed! You've got yourself a new sub.👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 месяцев назад
Awesome, thank you!
@gravelyman
@gravelyman 4 года назад
I hold my thumb over the seat hole and blow through the inlet. Yes it hurts lol. After I install seat I hold the carb upside down and blow through the inlet with my mouth. Great video Steve 👍
@allanpeters596
@allanpeters596 3 года назад
My problem is obvious .... Wrong beer! My bad. Great video. Thanks for the info. Makes sense. My carb has an adjusting screw in the centre of the bowl. Going to order the rebuild kit and repair.
@brianstitt4161
@brianstitt4161 Год назад
Thanks Steve. You're a big help and I drink a Budweiser or at times a good bitter IPA .
@robertnick6403
@robertnick6403 2 года назад
Thank you!
@FreedomAlchemy
@FreedomAlchemy 2 года назад
Good stuff. I'm going to give it a go.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Good luck!
@tab_nebraska235
@tab_nebraska235 Год назад
Great video, Steve. Thanks much!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
No worries!
@tehaysli
@tehaysli Год назад
Steve, perfect tutorial. Thank you
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
Very welcome
@tobytollefsen8802
@tobytollefsen8802 3 года назад
AWESOMME VIDEO. i LEARNED AND SAVED ALOT
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Glad to hear it!
@rkroz4005
@rkroz4005 2 года назад
Very Helpful lesson. Thanks!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
You're very welcome!
@simonkenton5927
@simonkenton5927 3 года назад
Thanks as always Simon
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
My pleasure!
@toddhurley1237
@toddhurley1237 2 года назад
hey. was just cleaning carb on my snowblower, put it back together and it was leaking gas bad ,watched this video and when i was blowing out the gas intake, i DID blow that seat out on the floor but didnt know it.works fine now....thanks... just subb
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Great job!
@tonyreed9810
@tonyreed9810 3 года назад
Thanks for the info Steve! Have a chraftsman blower leaking needs work this helps!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Good luck!
@greendoorinvestments
@greendoorinvestments 2 года назад
air tip was great, thanks
@marksullivan4180
@marksullivan4180 2 года назад
Great video. I'm pretty sure mine has a bad float. But I'm going to replace the 25 year old needle/seat also. Thanks.
@winstonclarke9221
@winstonclarke9221 4 года назад
Excellent thinking, Stevie, Great Video.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...
@87GP400
@87GP400 3 года назад
Thank s Steve, very good info !
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
You are very welcome
@faisalbashir9842
@faisalbashir9842 2 года назад
excellent , great video, mine was leaking into the engine side and into the oil sump. thanks .
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
You're welcome!
@darellsunderlin4670
@darellsunderlin4670 4 года назад
Steve there were some older Briggs with brass floats , and you should mention a lot of the Tecumseh carbs had a high spot & a low spot in the bottom of the fuel bowl and it has to be put on correctly or it won't allow the float to come down. I have also repaired many brass floats by putting them in a cup of boiled water & held it completely under the water , and then you should see bubbles come out . Then you can Mark it , clean it & solder it .! :-) hope that helps someone too.
@kstickak
@kstickak 8 месяцев назад
That’s a perfect video. Thanks.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 месяцев назад
You're welcome!
@Leonardokite
@Leonardokite 4 года назад
<a href="#" class="seekto" data-time="644">10:44</a> Good job, I could indeed hear the sloshing! Hard to imagine that plastic wins! I guess in the right application!
@je1279
@je1279 4 года назад
Tecumsey, tecumsah... Great video as always. I have a tool that looks like a knitting needle to remove and replace those old rubber seats but apparently, a compressor works just as well.
@splash5974
@splash5974 4 года назад
Hey Steve, recently changed a needle and seat on a flooding Tecumseh carb. Next morning there was a nice pile of gas under the snowblower where the gas leaked out of the carb overnight. Checked to make sure everything was seated right, then noticed the plastic float was full of gas! Could hear it sloshing around. I needed the blower right away, so i drilled 2 tiny holes in the float to empty it out. Figured out that the floats are 2 piece units that have a seam running down the middle. Thats where it was leaking fuel inside. So i took my plastic welding gun and re-melted the plastic in the seam area and the 2 holes, and reinstalled. So far its holding up great! Lol Next time i see gas again, i will order a new float. But yes, the plastic ones can get full of gas inside them! Cheers
@zerohope6720
@zerohope6720 7 месяцев назад
Now i wanna drink beer and fix stuff!..very helpful.this vid is part of my research before i tackle my carb project( leaky carb/ craftsman 4 stroke)
@robertmoneypenny6028
@robertmoneypenny6028 4 года назад
Thanks for that. My beer of choice is James Ready a great Canadian lager.
@jnh5462
@jnh5462 2 года назад
Great explanation!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Thanks!
@DouglasUphoff
@DouglasUphoff 4 года назад
Awesome Information! Thanks
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@annaaron3510
@annaaron3510 2 года назад
Excelllente Steve once again ! Got near 2 feet of snow dumped here Downeast. Damn Tecumseh carb ( Toro snowblower) dripped gas over my hand at 8 F ( whine). You solved this. BUTT: since you asked about carb beers 🤣, when are you going to imbibe some fine ale or at least micro brews ? That is an order. Much thx for what you do.
@Morning-Star1975
@Morning-Star1975 3 года назад
Loved the video thanks.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Our pleasure!
@DeepCreekIronWorks
@DeepCreekIronWorks 4 года назад
Awesome information sir. The only beer worth drinking for me is a local craft brew called Devils Backbone, in Vienna Lager. They are out of Charlottesville, Virginia. Love what you do sir
@IndianHemlock
@IndianHemlock Год назад
Thanks Steve !! Having this exact issue !! Thanks for the how to video ! I think I will order the parts and have a Pabst blue ribbon when I fix it ! Cheers 🍻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
Good luck!
@oskarandradev147
@oskarandradev147 7 месяцев назад
Well explained thanks
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 месяцев назад
You're welcome
@TheAhoy2k
@TheAhoy2k 4 года назад
Thanks Steve , this video help me fix mine :)
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Great to hear!
@BrucesShop
@BrucesShop 4 года назад
Always fun. Thanks Steve
@marklawson8346
@marklawson8346 4 года назад
Your the man thanks Steve for the video 👍🏻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@geyser3445
@geyser3445 4 года назад
Excellent explanation.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...
@cameronwebb3959
@cameronwebb3959 4 года назад
Great video thanks for sharing
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
Thank You...and You're Welcome...
@1903bretep
@1903bretep 4 года назад
Steve: another great video many thanks.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 года назад
You're Welcome...
@siryarwammowray3445
@siryarwammowray3445 3 года назад
Excellent video thx exactly what mine needs
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Glad it helped
@mikeadams2339
@mikeadams2339 7 месяцев назад
Thanks! Good info,.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 месяцев назад
You're Welcome...
@suggestedusername6662
@suggestedusername6662 Год назад
You the man, Stan 👌🏻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
Thank You...
@petershisler4255
@petershisler4255 3 года назад
Great, easy to understand explanation. Where was Steve when I was taking Differential Equations in college? That class would have made a lot more sense with his easy-going and common sense teaching style.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 года назад
Wow, thanks!
@itself227
@itself227 4 года назад
Don't really have a carburetor beer, but Yuengling is a good all purpose brew
@gregorywagner5234
@gregorywagner5234 2 года назад
Thank you.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 года назад
Welcome!
@jaytapia7003
@jaytapia7003 Год назад
On behalf of all those who grew up without male role models and now home owners, thank you Sir.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Год назад
You're Welcome...
Далее
Proper Way To Tip A Lawn Mower Over
8:50
Просмотров 4,2 млн
Firmen Generator Leaking Gas From Carb. Easy Fix
17:24
How To Clean a Honda Style Carburetor (Step-by-Step)
20:01
How to fix a Fuel Leak Troy-bilt Snow blower
3:28
Просмотров 4,4 тыс.
Here’s how to troubleshoot a leaking carburetor!
10:14
How To TEST A SPARK PLUG In 1 Minute
11:18
Просмотров 1 млн
В семье появился подросток!
0:15