How to: Ford power steering fluid flush & change

Подписаться 39 тыс.

Просмотров 47 тыс.

50% 1

A complete flush and replacement of power assist steering fluid on a Ford Duratec HE. The car featured is a Mondeo Mk 3 (2000--2007) but the process will be near identical on any other Duratec and indeed Ford.
Video on replacing the pump and tank: • How to: Replace power ...
Also includes a flush with crank sensor disconnected.
You will need:
* Power steering fluid, originally to Ford specification M2C195-A (old)...
Amazon UK: amzn.to/2RSCeWB
...superseded by M2C204-A2 (new)...
Amazon UK: amzn.to/2QsyVsr
Or, follow the Ford TSB (07-1-7) and use Mercon V...
Amazon US: amzn.to/2Bre2U8 | UK: amzn.to/2SeBoni
** Warning! Some fluid product listings online are listing Ford spec M2C938-A as a replacement for M2C195-A. That is Mercon LV ATF and I'm fairly sure it's an error.
* Flat blade screwdriver
* Torx bits and 1/4" wrenches to suit if you disconnect the lines from the rack
* Rags to soak up spilled fluid.
* Oil drain pan.
* Funnel(s).
(Using the above Amazon links helps support my channel and is appreciated!)

Авто/Мото

Опубликовано:

16 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@CraigsDIY 2 года назад

Amazon links to relevant products (from the description) ~ Power steering fluid: Follow the Ford TSB and use Mercon V... Amazon US: amzn.to/2Bre2U8 | UK: amzn.to/2SeBoni Or, Fluid M2C195-A (old)... Amazon UK: amzn.to/2RSCeWB ...or M2C204-A2 (new)... Amazon UK: amzn.to/2QsyVsr ** Warning: Some fluid product listings online are listing Ford spec M2C938-A as a replacement for M2C195-A. That is Mercon LV ATF and I'm fairly sure it's NOT correct.

@no-damn-alias 2 года назад

Oh your Mondeo is still alive. Nice to see. Had an European Fusion 1.4 and the power steering pump sounded like a mix of a hard working dentist drill and a noisy supercharger .

@djuyoguna3729 Год назад

you are amazing. your energy and will. in the same time, you are calm.

@v8man350 2 года назад

Excellent video Craig. Mondeo is looking well, thanks for sharing 👍🏻

@th0ut 2 года назад

4:20 if you just want to cranking the engine without starting it, just press gas pedal all the way in and then turn the key, works on 99% of cars, also on mondeo 3

@pawels8040 Год назад

Thank you for this video.

@bartoszk4812 Год назад

Thanks for the useful video. Will have a look at my Focus Mk2 setup to flush the system as a preventative maintenance..

@angellopez7778 Год назад

Thank you bro I'll be replacing a powerful steering pump and flush on a 2010 Ford focuse wish me the best

@ismailcezeri1691 2 года назад

Where were you ? Did you forget channel pasword? Nice to see you.

@brianmarshall1637 5 месяцев назад

As I am knocking on bit,could it be done by first of all by emptying the reservoir ten refill drive a few miles and keep doing this until clean appears.

@CraigsDIY 5 месяцев назад

Yes but the reservoir doesn't really hold that much, most of the fluid is in the hosing and the rack. If you do it that way you will waste a lot of fluid as you end up throwing away a lot of new mixed with the old. Might not cost more to just get a shop to do it for you.

@CraigsDIY 2 года назад

Video on replacing the pump and tank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XYYCfJctcsw.html Also includes a flush with crank sensor disconnected.

@guillermogorgeaguire1083 2 года назад

where were you? Could you make a video replacibng the head gasket?

@CraigsDIY 2 года назад

I sure hope not

@guillermogorgeaguire1083 2 года назад

@@CraigsDIY ahahah we hope the same, does pcv valve burn oil, if it is not working good?

@Edik0704 2 года назад

@@guillermogorgeaguire1083 it does normally with any car. if your car burns suddendly a lot of oil try it, you can also check if PCV works with the oil cap, but im not very sure about it. you must read into that