How To Form A 1.5" Overhang For A Concrete Patio

Подписаться 291 тыс.

Просмотров 40 тыс.

50% 1

#EverythingAboutConcrete #MikeDayConcrete #ConcreteForming
In this video I'm going to show you how I form a 1.5" overhang when I install forms for a concrete patio slab. The formed overhang helps to hide the seam between the bottom of the patio slab and the top of the foundation wall.
Without the formed overhang, when you strip the forms after pouring and finishing the concrete, you'll see where the patio slab sits on top of the concrete wall. If the backfill doesn't cover the seam, then it may not look as nice as you'd like. By overhanging the concrete, the seam is a lot less noticeable and looks a lot better when you don't cover it with backfill.
I have to form up a lot of my concrete pours. This forming technique is just one of the things we do to form patio slabs. If you want to learn more of my advanced forming techniques, check out The Concrete Underground below. Inside there I have a lot of my more advanced training techniques to help you learn how to do concrete work just like I do.
The Concrete Underground Training Academy:
www.theconcreteunderground.co...
HAMMER DRILL I'M USING:
amzn.to/38nieVh
DRILL DRIVER I'M USING:
amzn.to/2LVHTgp
CIRCULAR SAW I'M USING:
amzn.to/3au27In
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
FLOOR FINISHING POWER TROWELS:
amzn.to/3abyIAf
ScreeDemon Vibratory Screed:
shrsl.com/2ej6o
12' Screed Board for ScreeDemon:
shrsl.com/2ej6u
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Хобби

Опубликовано:

24 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@johnfahey7215 3 года назад

wishing you and the guys Happy Holidays, all the best for you. Always a pleasure watching 😀

@actionhiro4222 3 года назад

🎄 Merry Christmas 🎄 to you and your family and crew 🎄

@Mikidy303 3 года назад

Merry Christmas Mike to you, your family, friends, & crew. Nice video as always.

@ghostface1737 Год назад

Mike, you’re a stud. Thanks for these amazing videos. You’ve helped me a TON on my projects. God bless.

@matthewvalimont6547 Год назад

Thanks for explaining this in detail. I’m new in business and it’s these little details you just wouldn’t know unless you have years experience

@markmcmeen287 3 года назад

Great tips for pros and wannabe pros, thank you !

@barryrohrmeier2399 3 года назад

Merry Christmas to you and your crew !!!! Keep up the Great Videos and stay healthy and safe.

@anthonynichilo5836 3 года назад

Your spot on over hang is a must the 1.5" is a min and depends on width of material (brick, stone, peel and stick (culture stone) if there is a veneer, which we then allow for a drip to be cast in. Most defiantly the laser level is a must will pay for itself on the first job. Keep these great content videos coming. Merry Christmas to the community of doing it right!!

@samiralbalushi4611 3 года назад

Merry Christmas and happy new year to you and your family and friends

@crazyhandshands9028 3 года назад

Always perfecting the trade a BOSS.

@ramongarcia8044 3 года назад

Great work Mike I enjoy watch your videos 👍🏼👍🏼👍🏼happy holidays to all ya guys

@frankflanagan4360 3 года назад

Merry Christmas! We form overhangs the same way.... sometimes we have a form liner or step liner to give it a stone face if its stamped. Looks good! Frank - Washington DC

@tonyvalerio3778 3 года назад

Great job Mike 👍 Merry Christmas my friend.Tony from New Mexico

@ConstructionMachineryChannel 3 года назад

Nice work as always, thanks!

@tomroe2861 3 года назад

Merry Christmas

@xtrongtentaxion-x666 3 года назад

Almost 100K subs, & growing. 📈 Merry Christmas mentor mike & Crew. 😎

@morgan-nn1xm 3 года назад

You should have put a 3/4” chamfer strip where the 2/4 meets the 2/12 to add the finishing touch. Merry Christmas!!

@psidvicious 3 года назад

Ha! You beat me to it. That’s exactly what I was gonna say as well. It can give the concrete deck a thinner, more streamlined appearance.

@MikeDayConcrete 3 года назад

Sometimes we do. The wheelchair ramp video and my last stair video we did that.

@joeconner9801 3 года назад

Did a over 4” over hang years ago on a house slab patio. We did it all at once though. House and patios. South Louisiana though. We don’t have frost walls or basements.

@michealharwicksr983 2 года назад

I never seen this done before I’m gonna be doing one

@rangepro 3 года назад

100,000 coming your way!

@waltk9067 3 года назад

Mike merry Christmas

@jevgenijsgavrilovs5711 3 года назад

Thank you.

@q.j.mcneil6844 3 года назад

I haven’t done any over hangs but I’ve done highway medians where we had to make the median straightedge out of 2x4s at the right shape with the DOT

@3125Dissent 3 года назад

Mike, I am a big fan of your videos, and the care you take in providing a quality product to your customer and providing education to your viewers. Quick question for you: I live in DC and I recently poured a 3 part stone, 2 part sand, 1 part cement cap over an old coal chute. The pad serve two purposes, being both a stoop for a side door and a seal for the chute. A week after the pour, water is leaching through the pad (~8 inches thick) into the old chute . What would you recommend for sealing it? Thanks! Pat

@Garcia19960 3 года назад

Been doing concrete for almost a year now and I was trained to hold the 2x4 and just hammer the concrete nail by myself. Then after I just use the Paslode to add the 2x6 or 2x8. Interesting to see how u guys do it. More salaries I guess why I'm doing it hard way

@theartofconcrete 3 года назад

I use the exact same @dewalt set-up. Do you have the cordless vibratory also?

@lukeschardan6677 3 года назад

I was just wondering do you guys run it edger down that when you pull the face boards off

@dayemassey1132 2 года назад

I wanted to see this done to concrete steps just the only thing I found with the inch and I have hangover

@johndoe3328 Год назад

Sometimes I do it that way, If I have too. Usually I just pound stakes into the ground and toenail the 2X4 onto them rather than screwing them to the foundation. It's just a lot faster and easier. Plus, you don't need a hammer drill to strip the forms. Any dude with a hammer can do it.

@freddiemaggard5543 3 года назад

Merry Christmas Freddie D Maggard Corbin KY

@cabbyhubby 3 года назад

I went years without owning a hammer drill ...... bought one 10 years ago and wouldnt want to do without it ! also is thst your truck in thr backgrounx, if so lets see it

@apileofskulls 2 года назад

Love the video. May I ask... have you ever framed anything with a similar overhang but on a rounded patio? I need this. Thanks

@MikeDayConcrete 2 года назад

You would use something like Azek pvc trim boards 1x4's as long as the bend isn't to hard, then a 1x8 or 1x12 for the outside form.

@crawler8192 2 года назад

Would this same process work if I wanted to add 3 concrete steps up to my front porch? The porch itself was poured by professionals but has an overhang and I thought it would like nice if the steps match.

@01aharley 3 года назад

Used plywood instead of 2x12s so we had to run a board along the top and hard kick it using a string line to make sure it was straight. Had to tap with a hammer forever so the prisoners benches wouldn’t have to many bug holes, I’d like to try out that pencil vibrator in cases like that.

@QualityConcreteInc 3 года назад

Merry Christmas brother keep up the good work. Love you channel!!! My wife and I have a small concrete company up here in Canada. I REALLY ADMIRE YOUR PASSION for our trade.

@gordonanderson9725 3 года назад

Looks good as always . the Wife and i do concrete flatwork,color and stamping, acid stains, If it's concrete we do it.New to your channel. We live out west , Western Kansas . I've been pouring mud for 43yrs. Started back when You learned hands on "77" at 14yrs. old . keep up all the vidieos , And we hope you all have a HAPPY NEW YEAR! From Us @ Phoenix Concrete Specialist, Shelly&Gordon Anderson .

@pasqualepepe8910 2 года назад

Looks good, I would have placed a drip, to avoid the water running along the concrete wall.

@conneriannone6073 3 года назад

You a dewalt guy , Mike?

@ArthurDentZaphodBeeb 3 года назад

Tapcons are expensive. Two duplex nails driven in each hole work just as well, perhaps better. I've seen guys use a duplex with some tie wire.

@joegarcia4424 3 года назад

You can reuse the tapcons.

@ArthurDentZaphodBeeb 3 года назад

@@joegarcia4424 But why spend the money in the first place, or the labor to collect them once you've stripped the forms? And tapcons don't hold as well as nails anyway.

@joshlouiselle3741 3 года назад

Pinch nail is cheaper than tap cons

@psidvicious 3 года назад

Are you talking about double 16p nails into the drilled holes or a 16p and a piece of tie wire? If so, you’re right, they do hold good, but you’d have to drive them in all the way, so the 2x12 could sit flat. Then they’d be a lot tougher to strip.

@MikeDayConcrete 3 года назад

We'll use those Tapcon's over and over again too. Probably at least 20 times each.

@mitchyelvington4776 3 года назад

It hides a crooked wall!

@jeremyhuggins8796 3 года назад

For unto us a child is born, unto us a son is given: and the government shall be upon his shoulder: and his name shall be called Wonderful, Counsellor, The mighty God, The everlasting Father, The Prince of Peace. Isaiah 9:6 MERRY CHRISTMAS! 🎀