Тёмный

How to Get 300FPS on a Caliburn Nerf Blaster 

Frontline Foam
Подписаться 5 тыс.
Просмотров 15 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 67   
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
UPDATE! The aluminum ram doesn't leak anymore. We've addressed this issue by used two o-rings on the ramtip and/or making the o-ring notch taller and/or using a slightly larger o-ring.
@jimmitron
@jimmitron 3 года назад
Other than k25 and k31 springs are there any other more powerful springs that fit inside the other
@jimmitron
@jimmitron 3 года назад
Please reply
@darkenchanter2964
@darkenchanter2964 2 года назад
What website do I go to buy this gun? Does anyone sell this completed?
@BradleyPhillipsYT
@BradleyPhillipsYT 4 года назад
My favourite recently is to fully sleeve the brass in aluminium and use a scar barrel designed for the aluminium (16mm) so no brass is exposed at all
@ShadowMajere
@ShadowMajere 4 года назад
Imma have to try that. Probably makes it easier since most mods are made for the larger aluminum tubes
@rileycook7686
@rileycook7686 4 года назад
Yeah thats a good idea
@grapeapeductape2489
@grapeapeductape2489 4 года назад
This is the rifle that took out Kennedy at this point
@ShadowMajere
@ShadowMajere 4 года назад
Love my brass setup I got from you guys with the k-14. It did make me have to relearn loading since I was used to vanguard setups and kept forgetting to prime to change magazines lol. Once my next order from you guys arrives, I will have my talons converted to brass as well
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
Yeah... that catches me off guard too sometimes. Still.
@eagelcat
@eagelcat 2 года назад
the Nightingale on on its own is an awesome blaster the small it seems like it's going to make it better
@trentencraig5622
@trentencraig5622 4 года назад
Nfstrike boomco darts 2020 start the trend on every nerf video
@Eulemunin
@Eulemunin 3 года назад
I wonder what you would recommend to push a megaburn up to the 200 FPS level.
@jimmystancliff2843
@jimmystancliff2843 Год назад
Can you cut the spring in half then double the spring up put the cut half on the other half to make one would that make it stronger and fit better
@jimmystancliff2843
@jimmystancliff2843 Год назад
Can you also use teflon tape for a good seal cuz I use teflon tape for pipes water so it doesn't leak through the threads
@jimmystancliff2843
@jimmystancliff2843 Год назад
Can you cut that 400 spring down a little bit the one that hits about 400 can you cut that down so it's not as strong maybe five or six coils
@Stacey_-bf2mb
@Stacey_-bf2mb 3 года назад
I will start going to the gym if it means I get that k14
@Sci_X1
@Sci_X1 3 года назад
So what were all the materials used for this so I could possibly make this on my own
@falsehashtags6581
@falsehashtags6581 3 года назад
So... I bought the aluminum inserts for the Milan coupler, and the brass kit, and the takedown pins won’t fit in the inserts, and the rods don’t fit in the brass muzzle. Should I just drill out the holes (like maybe in a vice for the aluminum)?
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Yup. The alu inserts and prints sometimes are slightly misaligned. Hitting it with a 3/16 drill does the trick (same with muzzle).
@falsehashtags6581
@falsehashtags6581 3 года назад
So the drilling worked, but now the ramrod won’t fully go in the breech- like gets stuck really bad when it’s almost completely closed. Maybe the ram core is missaligned? Otherwise it’s working fine, just need to reprint the Milan coupler and get a aluminum plunger.
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
@@falsehashtags6581 Gotta make sure the front half especially the brass barrel portion is aligned with the ram. The ram should sit parallel with the priming bars.
@GetLikeJay
@GetLikeJay 3 года назад
Does the caliburn come pre-built or does all the parts come and I got to build it myself? Looking forward into getting one
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Both pre-built or a kit version! Pre-built: www.frontlinefoam.com/product/caliburn-diy-kit/ Kit version: www.frontlinefoam.com/product/caliburn-diy-kit/
@rileycook7686
@rileycook7686 4 года назад
This is exactly the video i was looking for Also what fps would you get from a k31 inside a k25 spring with an 18inch aluminium barrel but everything else is default because thats what i ordered from your website a week ago and im curious to know what fps that would shoot
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
You'd probably expect about 230-280FPS range. Chronograph it when it arrives. Depends on the rest of your setup too.
@rileycook7686
@rileycook7686 4 года назад
@@FrontlineFoamBlasters wow thats good how heavy would the prime be
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
@@rileycook7686 a little heavier than a k26 (around 14kg)
@rileycook7686
@rileycook7686 4 года назад
@@FrontlineFoamBlasters ok thanks
@aidanfriedfeld8889
@aidanfriedfeld8889 3 года назад
Would you say the 18in brass barrel would get better performance than the 24in aluminum barrel? I’m trying to make a silly high FPS plinking caliburn.
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Yeah, the 24in would probably give you more accuracy, but it is super long and the brass could easily hit stuff and bend. I generally don't go longer than 18" for that reason.
@wongyewxuan3880
@wongyewxuan3880 3 года назад
then buy 3ft long 17/32 brass. even a pro25 spring requires ~30" of 17/32 brass for optimal fps
@andrewanderson3472
@andrewanderson3472 2 года назад
What about carbon fibre barrels , or putting a layer of carbon over your brass
@Videos4uByme
@Videos4uByme 4 года назад
Sweet!
@johnnyklein181
@johnnyklein181 3 года назад
Would a metal coupler help with a k14 spring to hold the Caliburn together
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Perhaps, but the K14 is just a heavy spring load in general. If you're going with a K14, I'd say upgrade every part imaginable-get an aluminum plunger, sear, trigger, rambase, coupler inserts... everything. You'll also want to do maintenance on your blaster frequently as well.
@ChungyCheese
@ChungyCheese 2 года назад
would this work in an indra?
@ruru2500
@ruru2500 3 года назад
Reading off an off screen prompt for the 'sciencey' part?
@philipbutler6957
@philipbutler6957 4 года назад
Will the same 18 inch brass barrel/breach components work with your U Caliburns?
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
Unfortunately not. The u series uses a different clamping method for the barrel. However it would be possible to make it work with some tinkering.
@jimmystancliff2843
@jimmystancliff2843 Год назад
Do you guys own any lathes
@jacksonbroadus6298
@jacksonbroadus6298 3 года назад
Do you guys reccomend liquid lubricant or a thicker grease type lubricant.
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Here's the lube we use: frontlinefoam.com/product/silicone-lubricant/
@AustinMichael
@AustinMichael 2 года назад
@@FrontlineFoamBlasters damn I know you guys gotta make money but that tube is 5 bucks on amazon with prime shipping lol
@ADOPTMEDROO
@ADOPTMEDROO 3 месяца назад
how much is the k31
@pachoo0464
@pachoo0464 3 года назад
Is 18 inches of 17/32 brass the best barrel length for a k26 with a perfect air seal or would there be any performance to be gained with a 19 or 20 inch barrel?
@wongyewxuan3880
@wongyewxuan3880 3 года назад
18" is wayyyyyy too short. im using 30" 17/32 for 315fps ave from a pro25 spring for optimal fps
@MudMotorsMax
@MudMotorsMax 2 года назад
@@wongyewxuan3880 where can I get this and how do I install the brass tube
@bdude6093
@bdude6093 3 года назад
Use the 22kg on arm day
@makewithmegma
@makewithmegma 3 года назад
👌👍🔥
@falsehashtags6581
@falsehashtags6581 4 года назад
Can’t you just put aluminum around the brass?
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
Sure can. We call it "brass in disguise."
@falsehashtags6581
@falsehashtags6581 4 года назад
Wait actually how does the aluminum barrel cover secure the brass? I think I’ll get one, like the 18 inch with the receiver
@FrontlineFoamBlasters
@FrontlineFoamBlasters 4 года назад
@@falsehashtags6581 the cover slides over the brass. It’s a very close fit. To keep it secure, you can add a few wraps of electrical around the brass before sliding on the cover
@falsehashtags6581
@falsehashtags6581 3 года назад
@@FrontlineFoamBlasters Sorry if I’m asking too many questions, but is the barrel cover just the regular barrel that I’d get from captainslug’s hardware kits? Also, does the reciever come glued on to the barrel if I get the barrel with receiver and does the receiver have the ramrod in it when it arrives?
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
@@falsehashtags6581 no, it’s a different sized tube. The receiver is indeed glued onto the barrel. It doesn’t come with a ram by default.
@abhie4265
@abhie4265 2 года назад
Let's do something crazy, Hit 500 fps!!!! ✌😂
@dougs2313
@dougs2313 3 года назад
if u order from them expect not to get your parts
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
Hey is there a problem with your order?? We'll get it sorted out. Sorry about that! Please email me directly at derrikk.sun@frontlinefoam.com
@dougs2313
@dougs2313 3 года назад
@@FrontlineFoamBlasters i did and you finally refunded--order placed at beginning of feb -i tried multiple ways to get ahold of ya -phone call text, facebook, e-mail---nothing and i get a response on this vid- you company is a joke just look up people response on fb for the horrible printed parts and service
@dougs2313
@dougs2313 3 года назад
tried calling texting e-mailing and several other ways
@dougs2313
@dougs2313 3 года назад
@@FrontlineFoamBlasters but i will say u do make good vids--just not a good business company
@FrontlineFoamBlasters
@FrontlineFoamBlasters 3 года назад
@@dougs2313 so sorry about that! Contact me and we can get it sorted!
Далее
Caliburn 4 BUILD GUIDE
21:55
Просмотров 14 тыс.
无意间发现了老公的小金库 #一键入戏
00:20
skibidi army returns (skibidi toilet 77)
00:49
Просмотров 2,2 млн
Caliburn 4: New and Improved Nerf Sniper!
13:22
Просмотров 20 тыс.
Guide to Springs for Nerf Springer Blasters
11:52
Просмотров 12 тыс.
We Fire the Wrong Calibers Through The Wrong Guns
13:53
The Solothurn 20mm Anti-Tank Rifle
14:44
Просмотров 4,7 млн
Adam Savage's One Day Builds: Custom NERF Rifle
31:49
C4 or Caliburn? What's the difference?
6:54
Просмотров 17 тыс.
Lynx Tips, Tricks, & Tuning Guide
10:04
Просмотров 8 тыс.