HOW-TO Grease A Sealed Bearing

Подписаться 397 тыс.

Просмотров 811 тыс.

50% 1

HOW-TO Grease A Sealed Bearing
Ever wonder if sealed bearings can be greased? Follow along as I show you how easy it is to do!
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a beer!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #smallenginerepair #howto

Хобби

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 812

@toycarin9044 4 года назад

Good advice👍

@adrian.adrianl6401 3 года назад

All you have done is add further contaminates to an already dirty worn out bearing , also you should remove seals from the inside not the outside of the seal , and try cleaning the bearing before you remove the seals , wash the grease out before you add more grease , you can over pack bearings with grease , and use clean grease .

@rogertycholiz2218 2 года назад

@@adrian.adrianl6401 - Agreed! Much care should be taken to not damage the seals. Our Canuck friend should mention this.

@teofilstevenson 2 года назад

@@adrian.adrianl6401 Why do you say it’s already dirty, and this is all wrong? It’s been sealed. Depending on the application the video process could be fine, after all if you really want “right” then you replace the bearing.

@rmp3648 7 месяцев назад

make your own video@@adrian.adrianl6401 show us how it's done "right".. according to you

@elrobo3568 2 года назад

I'm an old master aircraft/heavy machinery mechanic. Always take both seals off and clean then inspect them, if the bearings are good make sure the old grease is all cleaned out. There is a thing called "balling" which is where two greases are not compatible and cause the grease to react and dry out making little non lubricating balls and the bearings will fail. we had some mishaps with F-16's having this problem when the wrong grease was used.

@dough8321 2 года назад

Yikes... F 16s having failures does NOT sound good!

@barrybills1449 Год назад

@@dough8321 Built cheap to be lowest bidder to get contract.

@woodstover Год назад

Yes! Auto mechanic here, never put new grease with old, always wash out old grease and inspect. I've also seen dissimilar greases turn to liquid and run out, losing all lubricity.

@666dynomax Год назад

@@woodstover what do you wash them with?

@lazarus908 Год назад

@@666dynomax I've seen other people use brake cleaner and or WD-40. One thing I did read was never to use wd-40 to stop bearing squeal (unless as a diagnostic prior to repair/replacement) This is because wd-40 breaks grease down. I saw a guy spraying it on bearings and it literally dissolves. Spin. Rinse with more wd-40. Spin. Rinse. I think he then sprayed brake cleaner on it to remove the wd-40....before repacking with grease. If you already got your project done let me know what worked for you as I'm in a similar boat! Hope I helped some!

@tractortalkwithgary1271 3 года назад

That was an awesome tip. I have never heard of anyone doing this. After talking with several friends who are mechanics, they all assumed that I knew to do this. It is nice that people believe that I am sharper than I actually am.

@ianbutler1983 7 лет назад

My God, how can supposedly grown men watch a video about greasing small engine equipment bearings and within a few posts start calling each other names and trade insults? It seems impossible to post any how-to video on youtube without hot-headed know-it-all keyboard experts chiming in to tell the poster how they are wrong and demonstrate to everyone how smart they are. Most seem to have never posted an actual video themselves, they just arm-chair critique others' videos. So all you self-proclaimed authorities on bearings- calm down. It is a bearing on a piece of garden equipment, not an F-15. Thanks for the video, Dony. Ignore the self-important twits in the comment section. We adults appreciate your efforts.

@donyboy73 7 лет назад

thanks Ian, lol

@peterbloggs8750 6 лет назад

Stupid insults don't help. But those with very long practical experience can spot howlers like "filling/packing" a bearing.

@josepeixoto3384 6 лет назад

STF UP! That´s the FUN of it!!

@philipprevost2982 3 года назад

You've got a wicked pen there Mr Ian. You hit the bullseye.

@ex-engineer6657 2 года назад

I've been doing this since the early '70s. The metal shielded ones get soaked overnight in solvent, blown out with compressed air, heated in a pan of proper lube, then the pan / lube/ bearing are cooled. Works great for hard to get parts, especially for obsolete equipment.

@donyboy73 2 года назад

thanks for the tip!

@raysplace6548 Год назад

Thanks for the tip.. Beer's on me 🍻🍻

@1marcelfilms 11 месяцев назад

would it be better to sit them upright so it gets only half filled not over filled?

@carlcap14911 7 лет назад

Who said I can't learn something today? I just learned how to grease a sealed bearing, thanks Donyboy.

@derekfromtauranga6012 3 года назад

In an emergency you can temporarily extend the life of a slightly noisy bearing by completely removing all the grease washing it in solvent and gently blowing out with compressed air and repack it with grease but leaving space for expansion inside the seals. You need to choose the correct type of grease for the application it’s working in as not all greases are created equal. Once the balls, rollers or race have become pitted replacement is the best option. Sometimes if you have an oddball sized bearing this is your only option until you can procure a replacement. From many years working as a machinery fleet mechanic I would sometimes have a sleeve machined up so I could fit a common over the counter bearing to replace hard to get oddball bearings that some machinery manufacturers thought would be a good idea to fit. 😀

@shaftwood 4 года назад

Thank you Dony Boy. I was planning to replace the sealed bearing in the head of my angle grinder. I repacked it with new grease instead, and it runs nice and smooth now.

@holdXtoshoot 6 лет назад

Thank you. This video saved me 40euros. I was replacing wheel bearings yesterday and got sand in new bearings and i had to wash all the grease out to get the sand out of there. Now i know how to re-grease them.

@dar7771 3 года назад

All these years and I never realized they were that easy. Thanks for the video. Good info.

@brianhovermill4591 7 лет назад

I have been a small engine mechanic for 20 years and found this very helpful. a lot of people are not aware that you can do this!

@cody481 3 года назад

Don't do this. Half Fill a soup can with grease. Heat it to 150-200 degrees. ( hair dryer oven etc). Push the warm bearing under the grease. Let it slowly cool. Then it will suck in just enough without stretching or scoring the seal. Replace the bearing when possible.

@steveiv9250 2 года назад

There’s a reason for that…..because your not suppose to !!

@mick1gallagher 2 года назад

I think i should take my small engine to a real mechanic

@icarossavvides2641 2 года назад

@@steveiv9250 Yes, just because you CAN do it doesn't mean you SHOULD do it.

@barrybills1449 Год назад

Uh What is the purpose of doing this to a bearing that is sealed? What is Timken’s professional opinion about disturbing the perfectly good seal. I have never had a sealed spindle bearing fail, can’t say the same for unsealed spindle earrings.

@ScoutJoe 4 года назад

I did this on the bearings inside the hubs of my bike they run smooth again and it saves me money so thank you!

@shonuffisthemaster 6 лет назад

i never knew you could get those covers off! thanks for the video. tip for packing the bearings, put a rubber glove on your left hand, some grese on the heel of your palm, press the bearing in it repeatedly with the other hand. this forces the grease through and works really fast.

@ericsacco7406 3 года назад

AWESOME!! Have been working on engines forever and never thought of this!!

@hfjchan 3 года назад

This is the best tutorial I have ever watched on youtube. Video is clear, high definition, focused the whole time. Voice is loud, clear, moderate speed with easy to understand accent. Varies types/sizes of bearing is demonstrated. Nice work!

@semco72057 7 лет назад

That is one of the things I learned while in the Air Force since we had trailers which had to be greased on a regular basis to keep them from breaking down when we needed them most. Thanks for the tip, and I hope you are having a nice week.

@rayburnett3253 3 года назад

Sidney,thank you sir for your service to your country. We as Americans need to stand up for your veterans. I myself am a veteran

@AmazingChinaToday 2 года назад

Fantastic demonstration and video. I'm hoping not to wreck a sealed bearing and this video was just what I needed.

@703am 7 лет назад

i never knew that could be done, I learn something new on your channel all the time

@privateassman8839 2 года назад

You should actually start from the inside edge of the rubber gasket. The rubber on the inside is much softer, and won't get damaged by the pick that you use, since it just folds out of the way. If you try to remove the gasket from the outer bearing race, you can tear the rubber and potentially damage the brass below it, meaning it wont seal as well when it's reassembled.

@electronicsNmore 7 лет назад

Good video. I usually remove both sides, soak it in mineral spirits to remove the old grease, then pack it with new grease.

@doorguner01 6 лет назад

electronicsNmore 😉

@bodeine454 5 лет назад

That's the way we were taught in auto shop back in the day. One reason was back then some greases had a different base make up like soap based for example, and if two different greases with a different base were mixed it could liquefy after awhile. I don't think that is the case as much these days but I am still more comfortable not mixing greases especially in something like a wheel bearing. Also, who wants to mix good clean grease with old dirty and potentially hardened grease? Not me, that's not how we were taught by our shop teacher. He believed, and so do I, in cleanliness especially when it comes to machined surfaces and tight tolerance parts, like engines and bearings!

@mullaway5746 4 года назад

Theres no f.cking grease in there

@ClockworksOfGL 4 года назад

electronicsNmore - ...and followed by a spray of WD40 and a blast of compressed air to remove the last of the crud. People forget that grease (actually, most lubricant) is designed to “absorb” a certain amount of contaminants, so it doesn’t need to be perfectly clean. Dirty lubricant=lubricant that’s done its job.

@terryjarrett4926 3 года назад

@@mullaway5746 have never used that in any bearing...should use a quality bearing grease

@GoodBadUglyest 7 лет назад

Like the video. it's amazing all these people have so much negative to say. For cryin out loud it's about greasing a bearing, it's not like he's greasing an aircraft carrier.

@dalemcinnes1834 2 года назад

There sure seems to be a lot of grease-sperts on here for sure. Dale in Canada

@hugieflhr03 3 года назад

I have to say I watched your video 2 -3 years ago and ever since I have checked every sealed bearing I’ve come across. I will tell you about 1/3 of new bearings I’ve purchased have had either no grease or very little. I would strongly suggest everyone watching this video to check your bearing, especially if they are critical !!! Like motorcycle wheel bearings.

@donyboy73 3 года назад

I agree!

@martinradtke5181 2 года назад

That's good to know and check.

@intensecutn Месяц назад

Yep, that's why I'm here! I was talking to a guy at work about my new scooter's bearings being a bit squeaky after riding it in the wet. He rides motorbikes and he said that he greases every single bearing he buys before installing it on his bike. He also said that the majority of new bearings don't have enough grease if any at all.

@billm5291 2 года назад

Great tip, used it on my mower deck idler pulleys. Way better than spending 30 bucks apiece for pulley/bearing combination.

@grantw.whitwam9948 7 лет назад

You made me feel better, I've been using these methods and more for years, never had a problem, thanks.

@ussenterprise5364 6 лет назад

I cleaned and greased the bearings on both idler pulleys on my Jeep Grand Cherokee, using this method. Worked like a charm! Many thanks! Cheers🍻!

@Al-Fiallos 3 года назад

Great, good advice. I'll be checking all my rubber sealed bearings from now on.

@TimothyEdDoran 3 года назад

Thanks. Very useful. I needed to reseat the cover on a bearing, because of my ineptitude when pressing the bearing in. This was most helpful

@not-pc6937 Год назад

Great advice - sometimes when your searching on RU-vid you come across a video that is quick and straight to the point - excellent 👍

@marksteele45 6 лет назад

Thank you sir you saved the day! The top spindle bearing is the same bearing in my Husqvarna, so I used an old spindle bearing. It only had a seal on one side though, so I pulled the seal off the idler bearing and used it on the spindle bearing.

@houndawg3 3 года назад

If your spindle has a zerk fitting, then the bearings should only have one seal so the open sides are facing the inside of the spindle. That way when you grease the spindle the grease can actually get to the bearings.

@bill2769 8 месяцев назад

Hi Don, love your channel. I re-grease snowmobile bearings used in the rear suspension wheels. They take a lot of abuse. I remove the bearings from the wheels with a press after removing the snap ring retainers. I remove both seals using a precision screwdriver. Bearings are cleaned in a jar with mineral spirits, followed with a blow gun with the bearing in a clean rag. Then, I spin the bearing to see if it has any resistance and check for pitting. If all is good, I use moly lithium grease and reinstall everything. This really extended the life for these extreme use bearings.

@LZDEN 6 лет назад

excellent.i will be doing this to my idler pulley bearings very soon...thank you.

@victormorales3144 3 года назад

Thank you for sharing your knowledge and experience. Great video. You saved us many headaches and money. Do not stop sharing your skills.

@donyboy73 3 года назад

thanks Victor!

@mattjones7621 4 года назад

That is a good video! I am a vacuum cleaner repairman and sometimes try this method. Sometimes it has worked and sometimes it hasn't.

@delmarreilkoff2946 7 лет назад

On our farm machinery, we drill a tiny hole in the metal sealed bearings and then use an injector needle. A dab of caulking then seals the small hole. The easy to reach bearings just get replaced, but some take hours of disassembly to get off, so this is were the injector needle comes in handy.

@josepeixoto3384 6 лет назад

Delmar: several great ideas together! I´ll add that not everyone realizes that for the caulk/silicone to adhere, the spot must be W E L L dgreased; Thank you

@grantw.whitwam9948 3 года назад

I've done the same many times with the metal seals, they're usually in a area that is protected anyway. I've also added oil with a syringe thru a very small hole. I know this will set off a wild debate about oil and grease not mixing, but the small amount of original grease is usually dried out anyway. I've had great luck.

@nunyabusiness3786 3 года назад

Where can I get an injector needle for my grease gun?

@ohmi-ran6173 2 года назад

@@nunyabusiness3786 at the injector needle and grease gun shop

@deondevilliers9272 3 года назад

Good idea to clean the bearing from old grease with benzine . If you reach the point where you need to do this the old grease is usually hard and makes the bearing rough and new grease wont solve the problem. So clean it out first and blow it out with air and the bearing usually becomes smooth and then you insert the fresh grease.

@edwardwilcox6606 2 года назад

Great vid thanks. Just a few points, after prying the seals out there is usually bending, so before reinstalling check you flatten the seal out perfectly. I always use a good quality "water-proof" grease as this type of grease doesn`t get washed-out so easily. Don`t buy cheap bearings where ill fitting seals don`t actually keep dirt & water out, the main cause of bearing failure. Finally as this vid points out don`t over grease the bearing. I always take off both seals squeeze the grease but leave a finger groove in the grease so as not to put pressure on the seal.

@oldoldpilgrim7898 4 года назад

DonnyBoy, I need my mini bike tomorrow and didn't know how to remove the bearing seals. For the information of US residents, Harbor Freight has a set of picks that's often on sale for around a dollar. Mine worked fine. Thank you for the video

@davidrosenkrantz4854 4 года назад

Thanks Donny I always learn something from you.

@GJM866 3 года назад

Awesome! I didn't know this was possible. Thanks for posting!

@sailme2day 5 лет назад

thank you Don , I never knew this , very helpful how to video . Sharing with my friends .

@99carnot 7 лет назад

I did not know this could be done. Very good to know. Thanks and have a good weekend!

@Stevespecs 7 лет назад

Guitar pick works great too.

@BrewCityRider 5 лет назад

Thanks man! Never knew sealed bearings could be reused like this

@Rastameister 7 лет назад

Excellent! Thanks. Who would've thought it was so easy.

@marcstecker746 3 года назад

Excellent video. Thank you Donny.

@frankfohn315 6 лет назад

Love this guy.....Thank you Don

@coniow 3 года назад

Thank you for this. I have 2 wheels that seized up after I rode through a flood, (didn't realise they got wet :-(. Managed to free them up with heat and light oil, followed by thicker oil, but grease would be far better! I shall give this a go!

@williammarr1931 7 лет назад

Great lesson! Thank you.

@steveb.6267 4 года назад

Another excellent video. You definitely have good teaching talent. Very articulate.

@rogertycholiz2218 2 года назад

SteveB.... I disagree about using white lithium grease. Also the bearing should be soaked in solvent and cleaned.

@paulwharton1850 6 лет назад

Excellent video - Many thanks !

@braikka 3 года назад

I never knew that you can regrease these bearings. Thanks

@cmdaltctr 5 лет назад

Thank you! Similar technique based on this video It works on dura ace 9100 hollowtech bottom bracket.

@Bigtwin88 7 лет назад

Very good information... Thank you...

@bigdanwess 7 лет назад

Great tip Dony... Thanks !

@praetorianpatriot3267 3 года назад

Clutch "Throwout" bearings come to mind for this great tip....

@billbreeding797 3 года назад

Learned this trick 46 years ago....good to share. God Bless America

@kan815k 3 года назад

Daybook is from Canada.

@pirihern9329 4 года назад

You saved me mucho denero thanks. Koyo tensioner and idler pulleys go for 35 dollars and up especially for lexus vehicles

@unchocoenchina568 6 лет назад

great trick!...thanks for sharing

@happy60five32 7 лет назад

This will work been doin it for 40years! Never had a problem.

@hermanchow1405 7 лет назад

appreciate for the good idea , it is not always able to find the exact bearing , especially when it is a old tool ,thank you !!

@DonziGT230 6 лет назад

It's best to clean the bearing out first to remove any contaminants and to remove the old grease which may not be compatible with the new grease. You also want to push the grease into the bearing, not just wipe it across the top like you did.

@robertheinkel6225 5 лет назад

I repacked a couple of idler pulleys on my mower deck. They run smoother now. I had already replaced one, and repacked that one to replace the other one. Now I have a spare that is repacked and ready to go if needed.

@JeffreyStrader 5 лет назад

Thank You for this video. Just saved me almost $100 in bearings.

@johnvandergriff3521 5 лет назад

Great Video!! Thank You!!👍🏻👍🏻

@purpsamurai9661 3 года назад

Thanks a lot! Now I can enjoy riding my bike with friends.

@red2965 Год назад

Nice I thought I was going to have to dig out my dad's needle that's how he done it but as you say under pressure or speed it spin's out. Thanks Donny boy for your service.

@ruebenskedgwell9627 2 года назад

Simple yet very informative cheers

@harryhenderson2259 3 года назад

GENIUS !" THANK YOU FRIEND !" YOU DA MANN !"👍

@googleplusisdead 7 лет назад

I like to use the injector after removing the cover. Easy to get grease on opposite side of the bearing. RichE

@philippesabourin9026 3 года назад

Ont apprend quelle que chose a tous les jour !! We learn some thing new every day !!!

@donyboy73 3 года назад

certainement!

@jimmysapien9961 4 года назад

Great information Thank You 🙏

@TheGUNNY1966 7 лет назад

There are further suggestions that should have been made know!( 1 ) There are different grades of grease ( SHOWN ) however the correct process is to use "for instance brake parts cleaner" to flush out all the old grease.( 2 ) NOTE: Remove BOTH sides seals then LIGHTLY blow compressed air thru to remove the residue. DO NOT SPIN THE BEARING WITH COMPRESSED AIR!NOTE: In high temp bearings the grease expands when under heat so don't pack more grease than needed.( 3 ) Once this has been completed pack the grease from both sides to force it into the inner channel groove then spin the bearing by hand to ensure the grease has been packed.( 4 ) REPEAT packing the bearing then remove excessive grease.( 5 ) Reinstall the side seals! Following this method will ensure the grease is fresh & there is no Old Residue of the previous grease. As twosence fromCleveland stated- QUOTE: Petroleum lubes generally mix, but the additive package for speed range, temperature (hot or cold), and various chemical repellent properties can "cake" when mixed. There is also silicone grease which won't mix with anything (rare though). This is why it is necessary to remove the OLD grease.KUDOS for a good video donyboy73

@clarencealexander1908 4 года назад

You would be better off to make your own video. Your suggestions sound valid but I could barely follow along. The grammar and punctuation leaves me wondering about certain steps.

@mattfoley6082 3 года назад

@@clarencealexander1908 What don't you understand?

@ridemfast7625 3 года назад

@@mattfoley6082 If he cant understand what was explained, he should not own tools.

@kiyotaka269 3 года назад

@@clarencealexander1908 Are you slow?

@JR-gg8wy 5 лет назад

Thank You Very Much; Just what I needed to know on the Sealed Bearing's on my Swisher Blade spindle. Thank You So Much for Shareing.

@donyboy73 5 лет назад

make sure you're subscribed

@cerwin21 3 года назад

Great advice, I use Lucas Oil red n tacky. Brake clean the cheap stuff out, dry, and apply

@chrisgonzales57 5 лет назад

Great video man was thinking i couldnt re grease these bearing thanks alot

@darylwade2335 3 года назад

Wow! Just learned something new! Thanks!

@ronaldhemmings2476 4 года назад

Excellent video , no guess work needed .

@shahidbashar559 Год назад

this video is very helpful with a lot of information thank you so much for sharing.

@russwenzinger1029 2 года назад

Great video. A natural teacher.

@pipedreams57 3 года назад

For small high speed bearings like alternator bearings or idler pulley bearings, that see sub freeing temperatures, I use a thinner lightweight grease. Heavy grease will spin the bearing centers sometimes if you don't use light enough grease or too much grease. too much grease causes a bearing to run much hotter.

@tandemwings4733 Год назад

And do you know why?

@satibel 8 месяцев назад

@@tandemwings4733 too much grease creates friction, friction creates heat.

@tandemwings4733 8 месяцев назад

@@satibel I'm very well aware of that. I wasn't asking you, I was asking him.

@haylspa 6 лет назад

Thank you very much for this video!!!

@honda3102 4 года назад

Brilliant, thanks for this info, good on ya.

@brucesheehe6305 3 года назад

I really enjoy your channel. PhD is small engine and machine mechanics.

@jimbola77 7 лет назад

EXCELLENT DON THANK YOU FOR SHARING!!! I NEVER KNEW YOU CAN REGREASE THEM NICE!!!

@ValkyrieRiderIPT Год назад

There's a lot of people who would like to see your excellent video. If you could double the life of the spindle bearings, that would be a game changer.

@202vaughn 7 лет назад

I've gotta try this. I didn't realize it is so easy to remove and reinstall the plastic covers!

@geojor 6 лет назад

very good information, thank you ...

@imaginewagons3777 3 года назад

Thanks man! I'll be repacking my freehub bearings!

@gizmothewytchdoktor1049 7 лет назад

my alternators will appreciate this a lot! thanks ;-)

@chadburks9264 3 года назад

Excellent video.... I just learned a few things from this video..... when and where the different types of bearings go, and for what reason.... I learned that I can remove the seal and tool needed for romoval, in order to grease it, I also that I could do this in any situation , no matter the application it is being used for at that particular time, same process carries across the entire field of bearings and races... So 👍👍...

@donyboy73 3 года назад

Glad you enjoyed it!

@pauljanssen7594 Год назад

Yes as one comment about the one is you use the edge of a ten or twelve thousand feeler gauge The seat off without damaging use high quality I used to use teflon on some of my bearings make sure you wash your mouth out with dry air and some cleaning fluid.

@MrRtwilson 3 года назад

Great advice.

@cartercurrie6529 2 года назад

Enjoyed your video, I’m a new subscriber and look forward to learning the proper way to do maintenance on my snowblower, etc.

@doyleredwine1683 3 года назад

Love you vids. Not too wordy and to the point

@gordonpeden6234 3 года назад

Hey Donny Love your work! You're my favourite Canadian.

@donyboy73 3 года назад

Wow, thanks!

@mikeluckett602 7 лет назад

great video DonyBoy thanks

@txtermm 5 лет назад

Great Video, Thanks!

@BICIeCOMPUTERconGabriele 5 лет назад

Thank you, very useful.

@regulajoe1 7 лет назад

What a good set of videos. So easy on most things. Very helpful. Thank you Don!

@jetjazz05 7 лет назад

Wow, the needle injector for ball joints... that is GENIUS.... I've only ever regreased a ball joint once or twice because I would take the ball joint off the car, take it into my work shed, clean the grease out, then put the new in and replace the boot.... this doesn't risk contamination and it's so so much faster than that. P.S. I tried adding grease while it was still attached to the car, but since I work in my front yard in Florida there's grass, dirt, and especially SAND that blows up all the time. Just one quick gust of wind and sand is in everything. It's really difficult to keep a clean environment when if you accidentally touch the ground and then what you're working on again particles of sand will be in it :(