How to handle cracked connecting rods correctly

Подписаться 109 тыс.

Просмотров 7 тыс.

50% 1

Cracking doesn't have any disadvantages but it does have one major advantage: it ensures that the connecting rod shank and the bearing cap fit precisely. But what should you watch out for during installation?
00:00 Before assembly
00:45 Disassembling the connecting rod
01:35 Installing the bearing shell
01:49 Cleaning crack surface
Connecting rods form the link between the crankshaft and the pistons and transfer the gas and inertial forces to the crankshaft. For the connecting rod to be mounted on the crankshaft, the large connecting rod eye must be divided.
One form of creating this division is "cracking": Cracked connecting rods are initially made as a single-part component. The large connecting rod eye is then broken in two in a targeted manner. The two parts are
screwed together again during mounting. The cracked fracture surfaces achieve an excellent fit precision between the connecting rod shank and the bearing cap. To prevent a mix-up, the connecting rod shanks and bearing caps that belong together are labelled with an identical pairing number.
Read here: www.ms-motorservice.com/int/e...

Авто/Мото

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2

@jorgebiden5035 8 месяцев назад

Hi thanks for this video. If the surface between rod and cap is slightly deformed is the rod still usable? On 5 rods you can’t tell where the split is but the other 3 can see the split location

@motorservicegroup 7 месяцев назад

Hi, you are right, usually you shouldn't be able to detect the crack only with difficulty. You have reacted exactly right and by taking a closer look. Sometimes you are lucky and there are particles on the surface that can be extracted. However, if the deformed areas of the cracked surface can be seen with the naked eye, we advise against further use of the connecting rods. The risk of problems later on is too high.