How to Heat Mold Inline Skate Shells | Inline Skating Tips

Подписаться 25 тыс.

Просмотров 33 тыс.

50% 1

It this week of T+R let's take a look at how to make those new inline skates more comfortable with a technique called heat molding.
SUPPORT THE CHANNEL
------
GRAB SOME T+R MERCH
teespring.com/stores/thirtyan...
SHOP AMAZON THROUGH MY LINK
amzn.to/3wNSwWt
SHOP OUTDOOR MASTER THROUGH MY LINK
outdoormaster.com/?ref=nsReJG...
Use code THIRTY+ROLLIN15 for 15% off!
FOLLOW T+R ON INSTAGRAM
/ thirtyandrollin
T+R RECOMMENDED PRODUCTS
----
BIG WHEEL INLINE SKATES
Rollerblade Twister Edge 80mm Skate amzn.to/2y2W9NH
Rollerblade Twister Edge 110mm 3WD Skate amzn.to/2AuAVJB
Rollerblade RB 80mm Skate amzn.to/2Yh1ppU
Rollerblade RB 110mm 3WD Skate amzn.to/3h6kFiy
FR Skates FR1 80mm Skate amzn.to/2MFic0H
Powerslide NEXT Pro 110mm Skate amzn.to/3h2NgFL
Roces EGO 3X110mm TIF amzn.to/3fPUoVe
AGGRESSIVE INLINE SKATES
Roces M12 amzn.to/2yLR1Ox
SKATE PARTS
Rollerblade Hydrogen 80mm Wheels amzn.to/3dOuIqm
PROTECTIVE GEAR
Triple Eight Dual Certified MIPS Helmet amzn.to/3fOS5Sf
Triple Eight Covert Elbow Pads amzn.to/2WyntNj
Triple Eight Wristsaver amzn.to/2Wwbi3t
Triple Eight Bumsaver amzn.to/2Aus8r1
G-Form Elite Knee-Shin Guards amzn.to/2WVS4TR
OTHER SKATE GEAR
Rollerblade Backpack Pro LT 30 amzn.to/2LB3bfC
EarFun Wireless Earbuds amzn.to/2WEzX6b
Triple Elite Liberty Oil amzn.to/2ZmOSnp
WD-40 White Lithium Grease amzn.to/3dNko1u
Derby Waxed Laces amzn.to/2TclrQG
Bones Skate Bearings Cleaning Kit amzn.to/2LzKiKf
CAMERAS
Sony ZV-1 amzn.to/3h6nQH0
Sony a6600 amzn.to/2UDVb2L
Sony a7s II amzn.to/2T5algx
Sony a7 III amzn.to/37ea68U
Canon M50 amzn.to/3fWpBGl
Canon EOS RP amzn.to/2A7CAFc
Canon EOS R amzn.to/3f1l2sR
GoPro Hero 7 Black amzn.to/2WTGAAt
GoPro Hero 8 Black amzn.to/2WBMiYE
GoPro Hero MAX amzn.to/2YbAlZu
Insta360 ONE X amzn.to/3cJHuFx
Insta360 ONE R amzn.to/3cLIOaM
LENSES
Sony 28-70mm F3.5-5.6 FE OSS amzn.to/3bCGMJB
Sony 24-70mm f/4 Vario-Tessar T FE OSS amzn.to/2XIUiI1
Canon EF 24-105mm f/3.5-5.6 IS STM amzn.to/3dLdHh0
Canon RF 24-105mm f/4L IS USM amzn.to/2UreSdY
SUPPORT
DJI Ronin S amzn.to/3bKxJqg
Benro Travel Tripod amzn.to/2Z2pJOs
OTHER CAMERA GEAR
Rode VideoMicro amzn.to/2y6hVA6
DJI Spark amzn.to/2TavzcI
Inline skating is dangerous. In some situations, I may choose to skate
without protective gear at my own risk. I highly encourage the use of protective gear.
All thoughts, views + opinions are my own.
Thanks for watching!

Спорт

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 194

@zarpof3811 Год назад

I heat molded my brand new 2022 Rollerblade Twisters with a hair drier. Now no more pressure on my ankle bones.

@ThirtyandRollin Год назад

Nice!

@jadrollervlog 2 года назад

I can't believe I never thought to try this!!!!

@ThirtyandRollin 2 года назад

It's quite effective!

@goldcoastblading-nottoolat7805 4 года назад

Very informative!! Nicely done. Next time I feel some kind of pressure point, I’ll give it a go. Thank you!

@ThirtyandRollin 4 года назад

It has saved me many times!

@Edwards-xx2mq 4 месяца назад

Great video, thank you!

@benedicttan7087 2 года назад

Hello! Thanks for this video! Extremely useful! Was looking for information all over. Any idea if FR skates are moldable?

@boriboribo 4 года назад

Like and sub, great video! I'm 37 and just got my first brand new skates. At first i was so shocked how they feel, but after a few hours on RU-vid, things are getting much better. I've heat moulded my liners, the diff. is huge. Now i need to go out and brake them in properly 😁

@ThirtyandRollin 4 года назад

Nice! Welcome!

@ZeusMerk 3 года назад

Thank you for making this video! Removed a hot spot on my left pinky toe that wouldn’t go away. Best part about it is it only took 10 minutes and 1 pass.

@ZeusMerk 3 года назад

FYI I did this on an FR1 boot.

@ThirtyandRollin 3 года назад

Sweet! It's always so nice to get those hot spots worked out.

@richievandijk2759 Год назад

Great video! I recently got the roces m12 lo, and I'm looking into remolding it a little, I keep having the same pressure points. They are partly made out of cornstarch so I'm not really sure if it's safe.. anyone tried before?

@TechSalesTom 2 года назад

need to try this on my Maxxum Edge 125. Have a pair of size 10 Macroblades 110 that I can literally do marathons with no pain. But on the maxxum edge 10.5 not only are they a lot tighter but I blisters on the inside of my feet “navicular accessory”. Funny enough I bought a pair of size 11 RB 110’s and the new Maxxum XT’s 10/10.5 and the size 10 macroblade is longer than both! just picked up a pair of E2 110’s and they have the closest feel to the macroblade, but still have a little bit of a hotspot in the same area. will try this process on them

@rxlifter4016 3 года назад

Skates definitely can be made comfortable right out of the box. Salomon used to make them... but the only skates I've ever tried in the past 2 years that felt good immediately were Sebas.

@ThirtyandRollin 3 года назад

I agree. Salomon's where and still are ahead of the game in quality and fit. I unfortunately have not been on Seba's yet. Need to though!

@mrabelone31 4 года назад

Thank you for this video. I was wondering how heat molding was done. I actually saw a video where they put the skate in the oven. I was like WTH SERIOUSLY?! But this makes a lot more sense

@ThirtyandRollin 4 года назад

Lol no no no don't put the whole shell in the oven unless you have a unibody skate with no liner that requires this to heat mold the integrated liner.

@mrabelone31 4 года назад

@@ThirtyandRollin thank you for the reply. And seriously, thank you so much for the video. (Sorry for all the words that didn't make sense. I was using the "swipe" feature on the keyboard. I edited everything lol)

@ThirtyandRollin 4 года назад

@@mrabelone31 Haha no worries I could read it. Glad this video helped you out!

@NoQualmsTheArtist 10 месяцев назад

That's for some carbon fibre boots, not plastic hard shells. I used to do that with some carbon speed skates.

@johnmpifer 2 года назад

@Thirty and Rollin Hey, thanks for the video, buddy. I immediately noticed hot spots on my inner malleolus ankle bones with my new RB Maxxum Edge 125 3WD’s when I first got them and tried them on. Figured I’d first try to see if the skates would break in a bit and lessen the discomfort, but, after around 6 hrs of fairly aggressive (for me, at least) skating (I’ve even already had to rotate wheels), they’re not getting any more comfortable. In fact, I went out yesterday, and had to turn around and head back after less than 15 minutes, because I was already in quite a bit of pain. It had been 4 days since my last 1-hr skate, which wasn’t too bad, but, I suppose the bruising and abrasion is cumulative, and this time it was really hurting. I can withstand a certain amount of discomfort (I’m also a distance runner, mountain biker, and cyclist, and past dirt bike and sportbike rider), but this was bad enough to be distracting and to take the fun out of skating. The good news is that, other than that inner malleolus, everything else on my feet feel great in the boots. It’s just those areas. Already have a heat gun in the garage, so I’ll be busting it out this coming week! Other than that, I’ve really enjoyed the skates so far! Thanks again for all you do for the inline skating community!

@gergelynagy4509 3 года назад

Hey there! This video is super useful! I just bought a FR3 80 skate, not very comfortable for now, but only have a few spots, in general it should be a good fit. But I just saw that it is not heat moldable. Is there an other way, or then there is nothing to do just hope I can break them in? Do you have any experience with this skate? I couldn't find any reviews or anything about this. FR is not crap, isn't it? :-)

@sfkid57 3 года назад

In my experience using a heat gun take some practice, They can melt things quicker than you would think.

@kazas41 4 года назад

Hey, regarding the main straps of RB Twister Edge, which of them goes closer to your foot? I was putting the thicker portion closer to the foot but now stwiched to the longer bit, as I think it offers a bit more surface for power transfer.

@ThirtyandRollin 4 года назад

I ride with the longer strap buckle side on top.

@drescherjm 4 года назад

I have short and wide feet. My first skates were a size and a half larger than my US shoe size and are still too narrow for my wide feet which caused very extreme pain until I made some alterations to the padding and skip 1 hole (at the outer widest point of my foot) in the lacing of the skate. When I eventually get a new pair of better skates to upgrade from my entry level RollerBlades I am sure I will need to do a little heat molding. Thanks for the video.

@ThirtyandRollin 4 года назад

Ya like I say, you need to find skates that fits your foot. There are all different shapes of skates. A larger narrow boot wont work if you foot is wide.

@drescherjm 4 года назад

@@ThirtyandRollin Although I do like the look of them, I know that twister edge are definitely not going to work for me. I have to do some more research on models that are better for wide feet.

@ThirtyandRollin 4 года назад

@@drescherjm Rollerblade RB 80 or 110, Powerslide NEXT 80 or 110, Roces EGO 80 or 110 lot of options. These are just a few.

@linnuewinnue 3 года назад

Hey! Thank you for this video! Do you know what temperature (°C/°F) is necessary? I found some small devices which heat up to 200°C (about 390°F) - is this enough?

@ThirtyandRollin 3 года назад

That should be plenty. You can always hold in in spot longer to warm it more.

@tantanny9 3 года назад

Excellent video! I just have a quick question. This only apply to a specific boot or any hardshell boot will work? I just got a Powerslide Next 90 and got pain below the inner ankle (around Navicular bone) on both side. I did heat mold the inline twice already and been skating on these for 5-6 times already but the pain are still there :(

@ThirtyandRollin 3 года назад

Any plastic hard shell boot not carbon fiber ect.

@stubear 4 года назад

I'd actually recommend people leave straps and bolt on parts on, if you warp the boot a bit they might not go on easily afterwards.

@ThirtyandRollin 4 года назад

Good call just be careful to not heat up the straps.

@sledghammermessiah3949 3 года назад

If you have a outer shell you that ankle shell over the boot shell it won't work.

@tanertaskesen2152 3 месяца назад

Is it possible to heat mold a carbon boot also? Or will it demage it?

@monster_slayer1769 4 года назад

Thank u for doing it with twister edges. I needed this. Edit: because i didnt think u could do it with the twisters. I thought they werent heat moldable.

@ThirtyandRollin 4 года назад

Any hardshell boot will work.

@monster_slayer1769 4 года назад

Thirty and Rollin i know that now thanks. But i thought i read somewhere that the twisters were not heat moldable so i held off on molding them.

@ThirtyandRollin 4 года назад

@@monster_slayer1769 The liners are not heat moldable but all hard shell skate boots are.

@BangPhotography 2 года назад

hi, can i heatmold the laces part of my NEXT100? i find the toes pocket a little too big and its almost impossible to budge the toes pocket with the laces. Thanks in advance!

@boli2016 3 года назад

hey regarding the outside foot toe area, mine has a metal plate inside to fasten the anti scrape plastic part, how do you heat mold that part?

@ThirtyandRollin 3 года назад

If it is removable try removing it first.

@TzT274 3 года назад

Im insanely flat-footed. I got new ABX v1 valos recently just the boot size 12 (I'm size 11) walking around in just the boot for hours doing test jumps to test the impact felt fine. Took them out to skate (crusing) and after like 10 minutes it was killing my feet right in the area where my arc should be. I used the same liner that Ive been using for years. Do you think heat molding would solve this? Or is this boot not going to work for me? btw, love the channel, love the content , nice to see this sport coming back

@ThirtyandRollin 3 года назад

It might work but an arch is a hard thing to work out because it is quite a big area. You could work it a little at a time to see if it works. It's hard to say without seeing your feet.

@jackoh495 3 года назад

What about heat molding to shrink a boot a bit to make it hug your foot. I'm finding when a get everything on there are a few spots I can't feel the shell and wonder if my foot is wiggling before I do actions like land or carve.

@ThirtyandRollin 3 года назад

Not sure you can do the whole boot without destroying the structural integrity.

@Deonis1993 4 года назад

Hey, quick question, sorry if someone already ask before. Do you use not original buckles in you twister edge skates. Mine looks different and seems way to hard to close, then the one you showed in the video. Thanks in advance.

@ThirtyandRollin 4 года назад

Nope those are the original buckles.

@StillAliveAndKicking_ 4 года назад

Good video.

@ThirtyandRollin 4 года назад

Thank you!

@hugorobinson277 3 года назад

Hi, I'd like to know if you have an advice or if there's some precaution to take when heat-molding near screw holes... Just got the FR3 310 and rolled approx. 50 km (3hrs in two sessions). My right foot arch definitely suffers from the ankle strap screw pointing in, and around this particular area. Man did it hurt after my last run (33km), had to walk on the heelfor the rest of the day. Rest of the skate is perfect though, when comparing to my old 1998 K2 fitness skates :) I really like the fit in general, the more forward stance and the speed that it generates! Thanks in advance, and also for all the other videos, really useful!

@ThirtyandRollin 3 года назад

It is ok. Just take it slow and relize you will not get that much flex out of that spot when heat molding.

@hugorobinson277 3 года назад

@@ThirtyandRollin yeah, I know I have a break-in phase to go through, but I'll go more gradually, one hour session max... Big thx for the advice, I'll also be more careful when pushing on the warm shell ✌

@rollingdubaiguy6415 4 года назад

Good advice in this video. Did you have to do this to your Twisters? I had a pair of Twisters about 4 years ago and loved them but man they were narrow! I had to do this to a pair of my Flying Eagle freeskates a couple years ago.

@ThirtyandRollin 4 года назад

Not the edge series that I have now but the previous Twisters I did.

@krisk.4935 4 года назад

Great content man! After quite a lot of research and searching online, i finally found the Twister Edge X in my size. For shoes i usually wear between 44,5 and 45 and for the skates i got 45 since they didn't have 45,5 in stock anywhere. My only worry is that my foot is a bit wide and I'm really hoping they would fit relatively comfortably without too many heatpoints. In a local store i tried size 45 Roces Vidi, the 4x90 ones, and they did fit absolutely perfectly from the get go. With them people again were advertising to go a size bigger. I know they are different types of skates but their boot didn't seem that wide. Hopefully the Twister Edge X fits almost as good without the necessity to use the heat gun too much. They seem like the absolutely perfect skates for my needs.

@ThirtyandRollin 4 года назад

Ya the Twisters are narrow but a great skate. I hope they work for your foot! Sizing up on a narrow boot doesn't help that much. With skates it's more about shape and which skates fit your feet correctly.

@willsmooth8826 4 года назад

hey, an update on the fit for twister edge x - pretty please? haha!

@shiftcmdoh 3 года назад

I got the same problem with twister edge x, dope looking skates but had to order a pair of myfit second skin liners cos of the pressure points there was some relief but will do another few more hours for the break in and consider heat molding an option! They def have a narrow shell, tried the FR1 80 and almost cried cos it was perfect for wider feet

@Stinger296 2 года назад

@@willsmooth8826 Didn’t try the Twister Edge, but just got a pair of FR 2’s. They run about 1 size small, but they are wide, in particular in the area where the ball of your foot is.

@joe4282 3 года назад

I have the Rollerblade NJ pros. How would I do it with blades that have a skin?

@ThirtyandRollin 3 года назад

Very good question. You have to heat the shell from inside. Much harder but doable. Just be careful not to touch the metal part of the heat gun to the shell.

@masculinespeaks Год назад

Got a pair of next 90s, with the my fit spc liners in them. My inside left ankle has become quite a nuisance in terms of pain. I can get out about 7 miles before my ankle starts to hurt(throbb8ng at thay point). I've just molded the boots in the affected area to the best of my knowledge. Will this make the pain dissappear or will it just be enough to cause little if any discomfort. I have to wait a few days now to see if it's enough as my ankle is pretty painful as of right now. And before you bring up stride, my stride is pretty tuned in. I'm also wondering is maybe the skate is just too big and I need a bigger liner to fill in the spots where there's excessive play.

@ThirtyandRollin Год назад

Yes wait for your ankle to fully recover and then try the skate again post heat molding. You may still feel a slight discomfort for longer skates but shouldn't hurt at all.

@kedaamono 4 года назад

Have you tried this with the roces egos you reviewed a little bit ago? I got them (prior to seeing your video) and theyre great skates but i think theres a pressure point by my ankle thats so annoying

@ThirtyandRollin 4 года назад

No I haven't since they were wide on me but you should be able to. Just go slow as they are a lighter weight plastic shell.

@kedaamono 4 года назад

@@ThirtyandRollin Cool, thanks :)

@diodeno666 2 года назад

Nice video, but i have a doubt, blisters appear because there is friction, movement between sock and liner or and boot shell, if we enlarge this gap by heat moulding, the gap will increase and then movement and friction and blisters, is my statement correct? Thanks and regards

@ThirtyandRollin 2 года назад

Blisters can and will happen where there is friction yes. Heat molding is to relive pressure points not to stop blisters. Blisters should go away over time. If you continue to get blisters you may have to big a shell.

@diodeno666 2 года назад

@@ThirtyandRollin i have use my skates for two days only, and i got a blister in the inner side of my left foot. Maybe is to early to mould the boot? Thanks again 🙌🙌🙌

@ThirtyandRollin 2 года назад

@@diodeno666 Ya I would let it heal and keep rolling them. If there is a lot of movement in that spot they may be too big.

@sledghammermessiah3949 3 года назад

Yea my skates hurt the left ball bone of my ankles bad. Should I heat mold um or will break in fix it. Cause the pain on the inner ball bone on my ankles is pretty Intense

@ThirtyandRollin 3 года назад

I would try to heat mold it.

@crd1105 3 года назад

kool! video.... got a question... how often I change my bearings or wheels....???

@ThirtyandRollin 3 года назад

Depends on how often you ride and what you ride. I can usually get about a year out of wheels and bearing before I purchase new ones.

@ZeusMerk 3 года назад

If you service your bearings they can last a lot longer than your wheels. You should be able to get at the very least 6-8 months with your wheels. You’ll be able to tell by how much smaller they’ve gotten.

@ryanpotter2327 2 года назад

So, I Just ordered a set of skates that have heat moldable liners, Should I heat mold the liners 1st thing? OR should I put some hours in them before heat molding them. and either or. should I mold my skate 1st or the liner 1st?

@ThirtyandRollin 2 года назад

Yes heat mold the liners first thing.

@konnyknees 2 года назад

great video, have RB SK blanks (aggressive skate) where my left foot is perfect and right foot has an inner ankle hot spot that gives me a blister and my toe is a bit cramped as well. going to try and see if I can force just a bit more room in the toe box with this technique. can't tell if the ankle blister is from a tight spot or if it's too loose there? do you have any advice for those inner ankle blister spots? are those generally caused by tightness or looseness? or does it always vary? cheers!

@ThirtyandRollin 2 года назад

It definitely can vary. How long have you skated on them so far?

@konnyknees 2 года назад

@@ThirtyandRollin probably a total of 10-12 hours

@ThirtyandRollin 2 года назад

@@konnyknees I would give it a few more hours and then heat mold it if it's a pressure point.

@MrAttley 4 года назад

Thank you, I'm sure it'll work, but hope I won't have to deal with this problem

@ThirtyandRollin 4 года назад

Ya it's really the last step to making a boot work.

@rollife 4 года назад

What about taking the Dremel and doing a generous cutout in the shell? ^^ Good insight, I'm sure all the newbies that are popping up right now will appreciate this video.

@ThirtyandRollin 4 года назад

I have never Dremeled out a boot for fit just a soul plate for wheels. Heat molding is all I have done for fit.

@rollife 4 года назад

@@ThirtyandRollin I was joking man hahaha. Think about how ridiculous that would look ^^ If you gotta go that far then you definitely got the wrong size hahaha

@rollife 4 года назад

@@ThirtyandRollin There's a golden rule when it comes to modding skates. If you can tell at first glance, you've done it wrong. Good mods are always hidden. Underneath the soulplate, underneath the skin, inside the shell... skates gotta look proper. So you definitely pass with your heat gun ^^ However if you skated an RB80 instead of a Twister, you'd never have those pressure points in the first place, but that's a whole other discussion ^^

@ThirtyandRollin 4 года назад

@@rollife Haha ok good. I was like wtf is this dude smokin? Your boot would be a Swiss cheese boot lol.

@rollife 4 года назад

@@ThirtyandRollin If I ever get my pro model it'll be a yellow shell with holes in it and a Swiss flag on the cuff hahaha. Gotta represent. Or maybe a brown chocolate shell? Hmm... now you got me thinkin^^

@deepwinter77 3 года назад

I'm going to give this a try on my Twister Edge boots im getting pain on the inside of my ankle just where the bone balls out not sure what the medical name is for that bone but its the only part thats sore. I can't skate on consecutive days if I skate to long atm.

@ThirtyandRollin 3 года назад

Should fix that for you!

@xXeLiAzZzXx 3 года назад

I have the exact same problem with those same skates. Did you manage to fix it?

@deepwinter77 3 года назад

@@xXeLiAzZzXx yeah it worked great, it took me two attempts to get it perfect, really happy with the results.

@sledghammermessiah3949 3 года назад

Im Having the same problem with the same skate. Could u send me a picture so I can see the end result where u heat molded it

@deepwinter77 3 года назад

@@sledghammermessiah3949 my Skates are up at my folks house atm, I won't be up for a while But it's pretty straight forward, I used the handle if a screwdriver to push the plastic out after I used the heat gun.

@optran4781 3 года назад

I’ve done this to k2 front street. Do you think it’ll work in the toe areas of Aeons? Feels a little shallow when I try intuitions

@ThirtyandRollin 3 года назад

I wouldn't see why not.

@optran4781 3 года назад

Was thinking the plastic on Aeons would be too thick but I’ll give it a shot;)

@ThirtyandRollin 3 года назад

@@optran4781 The upper shell isn't much thinker than other shells. Should work.

@bartomiejhabiciak9633 4 года назад

What power has your's heatgun ?

@ThirtyandRollin 4 года назад

It is 1200w.

@Geexx4 3 года назад

Hi ! And thank you for the video ! After trying and comparing PS Next in 40-41 (too big) and 38-39 (a little too small), I kept the latter, but my toe touches a bit against the plastic shell. I know you said one cannot add egg extra size, but do you think it's possible to heat mold the end of the skates to get the precious 2 or 3 needed millimetres extra ? Thank you and greetings from Germany !

@ThirtyandRollin 3 года назад

That area of the skate may be hard to heat mold but no body is stopping you from trying!

@AM-hv3pd 3 года назад

Hi @Thirty and Rollin, I am having a hard time deciding between the Next 80 in 42/43 (too small?) vs 44/45. Can I get the smaller ones to fit better with heat molding the liner or should I go for the bigger ones? Problem is, I have a foot lenght of 276mm which is too large for 42/43 (until 275) but to small for 44/45 (starting at 282mm) when looking at the Powerslide fitting table. Any suggestion? I am happy for feedback.

@Geexx4 3 года назад

@@AM-hv3pd Hi, I know you didn't ask me the question. But maybe my experience can be useful. My feet are narrow to normal, 25 cms long, and the shops advised me to get 40-41 (25,4-26,1 cms). I ordered and tried 38-39 (24.2 - 24.8) and 40-41. 40-41 felt big, after lacing them I felt like my ankles would not be supported very long, and there was way too much space in front in the toe box. With 38-39, I could touch the end of the skate with my big toe, but nothing bad or uncomfortable, the big toes were not crammed. The skate felt like it was a part of my leg. I asked around in many forums and kept 38-39 (24,2 -24,8 cms). They broke in and they are now perfect and comfortable, widthwise and lengthwise, no heat molding necessary. I only got a 40-41 Eva insole and put it on the 38-39 liner, that was even better and I haven't looked back since. Skated around 300 kms since I got my Powerslides Next end of May. The bigger size would have become too big after breaking in the skates and I would have had to buy extra things to make them fit.

@AM-hv3pd 3 года назад

@@Geexx4 Many thanks for your insights! With my 276mm feet I will try out the Rollerblade Twister Edge in 43 (280mm). At least on paper that might work (to have a 4mm comfort zone) but let's see :-)

@mead5095 2 года назад

I have the Roselle Inline Skate Pro 4 Wheels 76mm Cityaun 231mm White Size 7 For Women Men. I like to skate on smooth sidewalks and pavement. I have had these for a while and my feet hurt. I feel like there isn’t a lot of breathability and the boot is too hard. After I skate my wheels look flat. Can you recommend a skate for long mile rides like 9 miles?

@mead5095 2 года назад

Can anyone recommend a budget friendly skate?

@ThirtyandRollin 2 года назад

What is your budget?

@santiagoarboledalasso3965 3 года назад

Excellent video! I just have a quick question. I noticed you placed a square of tape on an area where two different parts of the hard boot will be rubbing on each other (3:49). I have a similar problem with my Maxxum edge 90 but in the inner malleolus. Do you think that just by heat molding the boot (white part of the hard boot in your vídeo) would be enough or should I also try to mold the hard boot cuff (black part of the hard boot in your video) as well?

@ThirtyandRollin 3 года назад

I would try the main shell first. The cuff is a bit harder to mold.

@santiagoarboledalasso3965 3 года назад

Thanks for your reply! I am a huge fan of you and your skills!

@johnmpifer 2 года назад

@@santiagoarboledalasso3965 How did it work out for you? I have the Maxxum Edge as well, but I have the 125 3WD. Same problem as you - severe pain on inner malleolus bones.

@santiagoarboledalasso3965 2 года назад

@@johnmpifer Hi John! I don’t know for how long you have had your Maxxum Edge, but if they have recently been bought and if you can change them for the RB cruisers, they seem to have a wider fit. I haven’t experienced it myself, but a friend of mine with the same problems as we do (I have both prominent internal malleolus and navicular :’( ) is now skating pain free!! If you can’t get the RBs or don’t plan on changing them, like me (I love having 4x90mm) I’ve had heat-molded them at least five times (it takes patience to punch out the hard boot enough for it to stop hurting). For being totally honest, the pain has decreased from a 9/10 to a 2/10 (10/10 being the worst pain and 1/10 almost no pain). I think I might keep doing it until I get better at skating and invest in skates that don’t hurt. Unfortunately there are no inline skating shops around my area. I might probably go to Canada to get my next pair at a good shop with good customer service.

@johnmpifer 2 года назад

@@santiagoarboledalasso3965 Thanks for the detailed reply! The weird thing is that I don’t have wide feet, nor large and wide ankles. I’ve never had to wear a wide shoe in my life. I’m a distance runner, and my feet and ankles are fairly skinny. I’m going to try punching them out with the heat gun and see what happens. They’re such cool skates. I hope I can get them to work for me.

@djcabrera 2 года назад

Hi, whats your shoe size and what size are your twisters? Im 9 in shoes and bought 9 twisters and they hurt below the ankle

@ThirtyandRollin 2 года назад

I am a 9-9.5 shoe. And I roll a 8.5 Twister.

@djcabrera 2 года назад

@@ThirtyandRollin i would have to heat mold mine, they feel good but around the ankle they are killing me

@zeeeeeezeeeeee 4 года назад

They say carbon boots are heat moldable. I want to know to what extent that is before i fork out big cash for a pair. I have wide and flat foot so my size most of the time is off and i would really like to find something that fits right. Im 3 weeks into rollerblading and im loving it except the foot pain. No shops to try, only overseas online orders. I have PS Next 80 btw. Thanx.

@StillAliveAndKicking_ 4 года назад

I have carbon fibre ice skates and they only mould a bit. True skates are much more mouldable. So it depends on the skate, but a way out skate will never fit. Best find out the length snd width first.

@ThirtyandRollin 4 года назад

I am not sure with carbon boots. I have only molded plastic hard shell boots with removable liners.

@alleystargrowley2784 4 года назад

I did successfully use a blow dryer but in was kind of a pain and took a few trys with alternating skate sessions

@ThirtyandRollin 4 года назад

Nice! Ya it is possible with some blow driers but not as efficient and your mileage may vary.

@alleystargrowley2784 4 года назад

@@ThirtyandRollin its the risk of buying skates online. I also had to do surgery on the liners but eventually they were fine

@ThirtyandRollin 4 года назад

@@alleystargrowley2784 Ya unfortunately very few foot shapes work perfect with the generic shapes of the boots. Therefore we mod.

@alleystargrowley2784 4 года назад

@@ThirtyandRollin makes me nervous about my new reigns i got coming.

@ThirtyandRollin 4 года назад

@@alleystargrowley2784 What boots are they going in?

@arnebroum2866 4 года назад

im not 100% shure, but as far as i know, the twister edges are not heat moldable. but u heat mold it though. i have the rollerblade rb das, they are not heat moldable as well and i have some pressure points. but im afraid to mold them. so now my question: are the twisters compareble to the rbs in this case? greets from germany

@ThirtyandRollin 4 года назад

Any hard shell boot is heat moldable. The liners are what's not heat moldable in most skates.

@arnebroum2866 4 года назад

Ahh thx :)

@ThirtyandRollin 4 года назад

@@arnebroum2866 No problem!

@fat2fitblading245 3 года назад

My feet are not that long (265mm) but very wide. I had some USD sway in 43/44, that felt too tight. I bought some MyFit Recall liners, that i heat molded, then they felt too big... So, i bought some Aeons, 41/42, that felt tiny, i putted the Recall liners, and heat molded the boot, now they feel good, finally... And surprisingly, my Sways, with the 41/42 zoom 100 liner feel good too, just molding the liner. Just to say, it's a long way to be comfy on your skates...😅

@ThirtyandRollin 3 года назад

It really is a long game with building the perfect skate. A skate that is perfect for somebody may suck for you. All depends on you foot shape and preference. Glad you finally got the magic combo though!

@fat2fitblading245 3 года назад

@@ThirtyandRollin i got two now!😁 The Aeons flat, and the Sways antirocker!😎

@ThirtyandRollin 3 года назад

@@fat2fitblading245 Sick skate quiver!

@jaylow759 3 года назад

Exact same hot spots in exacts same skates... different foot though. And color ;-)

@asian4lifeppk 3 года назад

Thanks for making this video - i was not aware this was an option. Would this work for decreasing the arch on a FR1 shell? Might be too big of a spot.

@ThirtyandRollin 3 года назад

Should work.

@roseshayer4608 3 года назад

Hi! I have very narrow feet, width is a size 5 but length a size 10! I don't live near a store that has rollerblades where I could try different ones on, so I ordered a pair of twister edge skates since many people have said they were too narrow for them. The length is good, my toes touch slightly when I put them on sitting but not when I stand up. But, my forefoot is still quite loose. Do you have any suggestions to make them fit better? Can this method be use to press down the top of the boot on the side of the laces? The plastic is so rigid that pulling on the laces doesn't do much. Thanks so much!

@ThirtyandRollin 3 года назад

Sound like you got the right size but you do have a very narrow foot. I would try placing a soft flat insole in the shell beneath the liner. I have sucked up a lot of room in boots that were too big volume wise by adding an insole or two. Good luck!

@roseshayer4608 3 года назад

@@ThirtyandRollin Okay thank you so much! Especially for such a quick reply!

@ThirtyandRollin 3 года назад

@@roseshayer4608 No problem!

@roseshayer4608 3 года назад

@@ThirtyandRollin I got the thickest insoles from CVS last night. They were pretty hard to get flat in the boot, but they fit amazing now!!! Thanks again!

@ThirtyandRollin 3 года назад

@@roseshayer4608 No problem! Glad it helped!

@hvdb4492 2 года назад

I have aeons and the balls of my feet and toes go numb even after six months. What can I do

@ThirtyandRollin 2 года назад

That's tough. You may need a different size or different skate depending on your foot shape.

@hvdb4492 2 года назад

@@ThirtyandRollin no no no pls there’s got to be something I can do after spending £££

@aguynamednathan 4 года назад

Gonna try this with my aggressive skates. My flat feet NEVER fit right in skates!

@ThirtyandRollin 4 года назад

Nice! Good luck!

@aguynamednathan 3 года назад

@cr4ngerby7e Yes

@jrzine 3 года назад

Need to remove the cuff too?

@ThirtyandRollin 3 года назад

Not unless your hot spot is behind the cuff.

@Skatafossy 4 года назад

I solved it by simply milling at the malleolus

@ThirtyandRollin 4 года назад

Nice!

@mateuszplewczynski1902 4 года назад

Wider soulplate mod?

@ThirtyandRollin 4 года назад

Are you looking for a tutorial? Which skate?

@mateuszplewczynski1902 4 года назад

@@ThirtyandRollin m12 please😁

@ThirtyandRollin 4 года назад

@@mateuszplewczynski1902 I don't know how to make a wider soul plate for the M12. I wish I did.

@ItachiUchiha-lr3yr 2 года назад

Heating plastic weakens it & makes it more brittle.

@ThirtyandRollin 2 года назад

This is true but if you have to mold a small spot in the shell to make them more comfortable for you to use then its worth it. I have heat molded most my skates and no stress cracks have happened over years of hard skating.

@GamerGrl90 3 года назад

Cries in stopped blading because my feet go numb.

@ThirtyandRollin 3 года назад

That's no good. Skates too small?

@GamerGrl90 3 года назад

@@ThirtyandRollin I honestly didn't realize that until recently, as my late dad would always tell me "numb is good! Keep pushing through!" I had them since I was 8, and turned 30 in December.

@ThirtyandRollin 3 года назад

@@GamerGrl90 Omg lol tight is good but numb is no bueno.

@kellyesteves5648 3 года назад

I bought some new skates not long ago and they fit well except in one area which is my big front toe. It is very painful and there is no way in exchanging them because I already had a test ride with them. The hard frame of the skates is not a problem because there is still a good gap behind the heel but it's more the liner itself. Here are the skates that I bought: www.skatehut.co.uk/skates/inline-skates/sfr-air-x-pro-80-inline-skates-black-silver.htm Is there a way how I could fix these? I would love to hear what your advice is. On top of that keep up with the good work. I love to watch your content. As a beginner, your videos help a lot. Cheers

@ThirtyandRollin 3 года назад

I would still warm the liner/shell up and put something like the handle end of a screw drive inside the boot to push out the constricting spot. You just need to stretch the liner/shell like you would with a hard shell.

@kellyesteves5648 3 года назад

@@ThirtyandRollin Thank you for the advice, I will try it out.

@drleishaobo 4 года назад

Use Dremel tool to remove material from inside is more effective than this

@ThirtyandRollin 4 года назад

If you want to weaken the integrity of your skate.

@koyle3027 Год назад

Guy it’s not a hockey skate you can’t bake these plastic pieces of crap it does nothing there’s no gel in this liners nor is there curved composite so heating them is just taking life out of your fruit boots but you prob only paid like $200 and in that case your skate is a plastic/aluminum Chinese toy. I seriously think this gentleman has no idea what he is doing and keeps applying things that are done to an ice hockey boot made from much more premium materials that will not work and WILL DAMAGE YOUR plastic “inline” skate and most certainly void any warranty. Skate ovens actually exist and you do bake composite inline skates but not plastic ones

@ThirtyandRollin Год назад

Thanks for your opinion.