Тёмный

How to Heat Mold Your Inline Skate Liners | Inline Skating Tips 

Thirty+Rollin
Подписаться 25 тыс.
Просмотров 13 тыс.
50% 1

If you are lucky enough to own a pair of heat moldable liners please do yourself a favor and take the time to heat mold them to your foot! The performance gains and comfort you will get from doing this, will pay for itself every time you skate! It is also really easy to heat mold your inline skate liners! Let's take a quick look at hoe to heat molding inline skate liners.
Big thanks to ‪@PowerslideInlineskates‬
SUPPORT THE CHANNEL
------
GRAB SOME T+R MERCH
teespring.com/stores/thirtyan...
JOIN THE T+R TEAM
/ thirtyandrollin
FOLLOW T+R ON INSTAGRAM
/ thirtyandrollin
T+R RECOMMENDED PRODUCTS
----
BIG WHEEL INLINE SKATES
Rollerblade Twister Edge 80mm Skate amzn.to/2y2W9NH
Rollerblade Twister Edge 110mm 3WD Skate amzn.to/2AuAVJB
Rollerblade Maxxum Edge 90mm Skate amzn.to/3aguqKm
Rollerblade Maxxum Edge 110mm Skate amzn.to/389qatc
Powerslide NEXT 80mm Skate amzn.to/38aUfJ1
Powerslide NEXT 110mm Skate amzn.to/3al49dT
Roces EGO 3X110mm TIF amzn.to/3fPUoVe
AGGRESSIVE INLINE SKATES
Roces M12 amzn.to/2yLR1Ox
USD AEON amzn.to/2Usl8BL
SKATE PARTS
Rollerblade Hydrogen Wheels amzn.to/3dOuIqm
Rollerblade Hydrogen Pro Wheels amzn.to/2K1kFF8
Bones Reds Bearings amzn.to/37jTq18
Rollerblade ILQ9 Pro Bearings amzn.to/3nr5nYs
Derby Waxed Laces amzn.to/2TclrQG
PROTECTIVE GEAR
Triple Eight Dual Certified MIPS Helmet amzn.to/3fOS5Sf
Triple Eight Covert Elbow Pads amzn.to/2WyntNj
Triple Eight Wristsaver amzn.to/2Wwbi3t
Triple Eight Bumsaver amzn.to/2Aus8r1
Bodyprox Padded Shorts amzn.to/3ajdClJ
G-Form Elite Knee-Shin Guards amzn.to/2WVS4TR
SKATE GEAR
Rollerblade Backpack Pro LT 30 amzn.to/2LB3bfC
Rollerblade Blade Tool Pro amzn.to/3qXQD5z
EarFun Wireless Earbuds amzn.to/2WEzX6b
Triple Elite Liberty Oil amzn.to/2ZmOSnp
WD-40 White Lithium Grease amzn.to/3dNko1u
Bones Skate Bearings Cleaning Kit amzn.to/2LzKiKf
VIDEO CAMERAS
Sony a6600 amzn.to/38526rv
Sony a7s III amzn.to/37nZ2HC
GoPro Hero 9 Black amzn.to/37op9yu
Insta360 One R amzn.to/3no8T62
PHOTO CAMERAS
Canon 5D MKIV amzn.to/2IT4dWT
Canon R5 amzn.to/3r0yGDy
LENSES
Sony 24-105mm amzn.to/3r3jYeT
Canon 16-35mm amzn.to/2Wjvkxu
Canon 24-105mm amzn.to/2KuxyHm
Canon 70-200mm amzn.to/2Wi946T
Canon 50mm amzn.to/2WiIDhr
Canon 85mm amzn.to/2Wi9r1h
Canon 100mm Macro amzn.to/3oOWlou
SUPPORT
DJI Ronin S amzn.to/3bKxJqg
Manfrotto Tripod amzn.to/2WjwdpO
Manfrotto Fluid Head 502 amzn.to/3mlpWEr
Benro Travel Tripod amzn.to/2Z2pJOs
OTHER CAMERA GEAR
Rode VideoMicro amzn.to/2y6hVA6
Rode Wireless Go amzn.to/37nJWSC
DJI Spark amzn.to/2TavzcI
Inline skating is dangerous. In some situations, I may choose to skate
without protective gear at my own risk. I highly encourage the use of protective gear.
All thoughts, views + opinions are my own.
Thanks for watching!

Спорт

Опубликовано:

 

5 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 89   
@m0narck
@m0narck 4 месяца назад
This is awesome, I NEED TO REDUCE MY RIGHT ANKLE PAIN, the ankle is so tender to the touch now
@SpookyBoots
@SpookyBoots 3 года назад
Thank you for this! Simple and to the point.
@BladerReboot
@BladerReboot 3 года назад
Great tutorial! Wish I had a video like this when I was heat molding my recall liners. I actually had to heat mold mine twice, because I was getting a little pain in my ankle. Turns out the first time I didn’t bake them long enough and the temperature was too low. Second time was perfect! Since I always skate with G form shinguards I put those on when I heat molded them the second time.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Good idea! Always best to try and heat mold wearing what you would when using them.
@Johney_Nomadic888
@Johney_Nomadic888 Год назад
This is a great updated video. The only other instructional video, or at least the one by Powerslide, is well outdated. Much appreciated. Thanks for such a great tutorial!
@ThePascalbriand
@ThePascalbriand 3 года назад
super cool video. I love the way you explain. thanks for all the tips.
@PimGeerts
@PimGeerts 9 месяцев назад
thanks for explaining! my Intuition liners fit sooo much better now!
@Cospirator
@Cospirator 3 года назад
I saw you are supposed to take out the insole or they would shrink. No issue?
@ThirtyandRollin
@ThirtyandRollin 3 года назад
I have heard that too but never have and didn't seem to effect them this time. Probably depends on the insole but wouldn't hurt to take them out just to be safe. Thanks for bringing this up!
@RollersReturn
@RollersReturn 3 года назад
Everyone needs to know to do this! Did mine and it’s a game changer.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
It really is!
@andrewpaladino4407
@andrewpaladino4407 3 года назад
Just got a pair of Maxxum Edge 125mm. Can't wait to try this and thanks for your video!
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Awesome enjoy! And thank you!
@pobzgiddyinlineskater4755
@pobzgiddyinlineskater4755 3 года назад
Thanks for the video. Let’s keep rolling
@danielnavar5339
@danielnavar5339 3 года назад
you’re super helpful dude
@GorillaDev417
@GorillaDev417 3 года назад
Awesome video man! Bout to heat mold the liners in my new Next 90s.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Nice! Enjoy them!
@PeterJohnsonJr
@PeterJohnsonJr 2 года назад
Thank you for this! There is a definite lack of info even from the manufacturers. Just got FR1 80 Deluxe Intuitions, and this is a great starting place.
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Intuitions are a little different. For those you will need to heat up a sock full of rice and let that heat up your liners.
@pobzgiddyinlineskater4755
@pobzgiddyinlineskater4755 3 года назад
I really wanted to try this with some liners I have that really squeeze my foot but am not sure if they are heat moldable because they even don’t have manufacture or brand name. How do I know if it is heat moldable
@abdallah2892
@abdallah2892 3 года назад
Thank's Rolim....🇧🇷🙏
@iainballantine1115
@iainballantine1115 3 года назад
Thanks for the video. Is it possible to re-mold liners as well? I have some Recalls that I've molded, but wonder whether I put too much flex at the ankle and would ideally like to mold them to a more upright position again.
@johnnydove
@johnnydove 3 года назад
yep! i have a pair of recalls that i’ve done a couple different times with different skates
@ericbernardi8116
@ericbernardi8116 3 года назад
Lucky man! Waiting for these SPC liners to be available again...
@ThirtyandRollin
@ThirtyandRollin 3 года назад
They are pretty nice!
@brosq4566
@brosq4566 3 года назад
What’s going on guys! Today, we’re making SNACKS! I know it’s a thing, but I’ll never not think it’s funny to bake your skates (liners)
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Haha I should have named this episode baking with T+R.
@brosq4566
@brosq4566 3 года назад
@@ThirtyandRollin missed opportunity! 😆
@dimaawny4548
@dimaawny4548 3 года назад
I don't know why but I thought one should skate with their skates once they heat moulded them, should one not? Like do I have to just sit with them until they're room temperature or can I skate with them after a few minutes of sitting? Thank you in advance🥰 I'm a fan from Egypt🇪🇬❤
@MichaelMerritt
@MichaelMerritt 3 года назад
Which liners do you use on your Rollerblade Twister Edge X's? New to the channel, great stuff!
@ThirtyandRollin
@ThirtyandRollin 3 года назад
I use the stock liners. You are a perfect tight fit for that shell and my foot.
@MichaelMerritt
@MichaelMerritt 3 года назад
@@ThirtyandRollin Thanks for the reply! I'm 39 and getting back in this month on those skates. I clipped into my K2 Fatty Pro's from 2010 and the plastic cuffs snapped immediately lol. I might try your longer frame setup if I get the courage.
@michaeldubrow9401
@michaeldubrow9401 2 года назад
Fantastic video! Better than using a sock full of rice to mold a ski boot liner! Is it helpful at all to bang on each heel and toe a few times, to ensure one's heel fit goes all the way back, and one has sufficient room in the toe box?
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Some liners can't be heat molded this way and need a sock full of rice.
@kaylynbecker2068
@kaylynbecker2068 Месяц назад
Can you heat the velcroed bottoms?
@threeballwilly
@threeballwilly Год назад
Old video so I understand if you don't get back to me. What were your decisions for swapping out the stock liners? I bought the USD Aeon 60s. Having measured my feet and comparing to their chart my feet fall in the upper end of USD Men's 11-12. Shoes I tend to wear 12-13. Space from heel to toe hasn't been an issue, but the boot squishes the top of my feet putting my toes asleep. I'm trying to figure out if I should go with a liner more specifically for Size 12 (one that's not accommodating Size 11 in any way), or should I heat mold the shell at the pressure points.. maybe both? Thanks for the video!
@threeballwilly
@threeballwilly Год назад
Sadly returning my skates isn't an option, so if they don't work out I'll have to sell them used.
@ThirtyandRollin
@ThirtyandRollin Год назад
I would look for some thinner liners for your toes. The AEONs are a bit flat and wide in the toebox.
@threeballwilly
@threeballwilly Год назад
@@ThirtyandRollin Thanks for your reply, I appreciate it!
@carlosroubert8646
@carlosroubert8646 2 года назад
Hi: I’m new to Inline. Can I do that to my Roces M-12 original liners? I really want your feedback. Thank you!
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Nope those are not heat moldable. The liners/skates will tell you if they are.
@jadrollervlog
@jadrollervlog 3 года назад
I was just going to make a video about this!!!!
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Great minds!
@jadrollervlog
@jadrollervlog 3 года назад
@@ThirtyandRollin hahaha except yours looks better than mine would have been.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
@@jadrollervlog Naw
@c6moneypit8
@c6moneypit8 Год назад
So I have the myfit skinny boy liners in my new usd Aeons . I have skated them 2 or 3 times at the park without heat molding and they feel pretty good but definitely so snug it takes me a minute and effort to get my feet into them. Should I let them break in naturally as I skate them or should i definitely heat mold them?
@ThirtyandRollin
@ThirtyandRollin Год назад
I would always heat mold asap.
@c6moneypit8
@c6moneypit8 Год назад
Ok so stop riding them and heat mold ? Or think it’s too late lol
@ThirtyandRollin
@ThirtyandRollin Год назад
@@c6moneypit8 Never too late. Just heat mold them.
@Skiamakhos
@Skiamakhos 3 года назад
That's 82 degrees Celsius for the rest of the world :-)
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Thank you! Sorry we have such a messed up unit of measure.
@Skiamakhos
@Skiamakhos 3 года назад
@@ThirtyandRollin no worries - we were using the same in the UK not that long ago. I just thought I'd save people some time looking it up, if they're watching from outside the US. It's a cool video - useful & informative.
@RaedAlotaibirj
@RaedAlotaibirj 9 месяцев назад
hi ,How long does it take to wear it after heating up?
@ThirtyandRollin
@ThirtyandRollin 9 месяцев назад
I usually leave them on for 30min or so. Or until cool again.
@harvardh
@harvardh Год назад
Are the liners that come with the Aeons heat moldable? My foot is too wide for them, will heat molding help or should I buy a wider liner? Thanks bro!
@ThirtyandRollin
@ThirtyandRollin Год назад
No I don't think so.
@harvardh
@harvardh Год назад
@@ThirtyandRollin do you know of any wide fitting liners? :)
@ThirtyandRollin
@ThirtyandRollin Год назад
@@harvardh No but if you are looking to reduce liner thickness you could go with a Second Skin or Intuition liner.
@harvardh
@harvardh Год назад
@@ThirtyandRollin gotcha, thanks 🙏
@DontLeaveMeLucile
@DontLeaveMeLucile Год назад
I was just watching a usd video about the new xxi's and they said the new stock liners are heat moldable
@Shad0wmoses
@Shad0wmoses 6 месяцев назад
this vid works with myfit recall right?
@ThirtyandRollin
@ThirtyandRollin 6 месяцев назад
Yep
@chilli-iceolive-abode2447
@chilli-iceolive-abode2447 3 года назад
Wood Wood!
@diersa182
@diersa182 3 года назад
What about twister edge x liner, are they heat moldable?
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Good question. Unfortunately they are not. I really hope the next version of these incorporates some degree of heat moldability.
@diersa182
@diersa182 3 года назад
@@ThirtyandRollin too bad they aren’t. Thanks for the answer. My feet got a very bad pain after using it for 10 minutes. The pain come from between the arch and the heel. I asked this because I’m gonna heat mold the hard shell, but if the liners were heat moldable, I’m gonna mold them first.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
@@diersa182 The shell should help.
@Adham_Gawdat
@Adham_Gawdat Год назад
My oven is not just heat its fire so the liners wouldn't burn like from the fire? Or do I use a microwave instead?
@ThirtyandRollin
@ThirtyandRollin Год назад
Don't microwave them. You need an electric or gas oven.
@Adham_Gawdat
@Adham_Gawdat Год назад
@@ThirtyandRollin but if I use a gas oven the liners would burn
@ThirtyandRollin
@ThirtyandRollin Год назад
@@Adham_Gawdat They will be fine. They are not cooking over an open fame. Plus it is not hot enough to burn.
@andreibonteanu3655
@andreibonteanu3655 3 года назад
Is it not important to lace up the liners as well? Seems like you just tightened up the hard boot around them.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
You want to tighten them just how you would when you go for a skate. I didn't lace the liners on these because the tongue is too wide and the laces don't work well.
@basssmashin1875
@basssmashin1875 Год назад
Is yours a gas oven or electric? All I have is a gas one .
@ThirtyandRollin
@ThirtyandRollin Год назад
Gas
@jetjaxon
@jetjaxon 3 года назад
Did you heat mould your Intuitions? You had Intuitions yeah?
@ThirtyandRollin
@ThirtyandRollin 3 года назад
Yep I did. You don't heat mold intuitions in the oven though. You use a sock full of hot rice.
@jetjaxon
@jetjaxon 3 года назад
@@ThirtyandRollin yeah I saw the tutorial on that one. Intuition liner owners I have spoken to seem on the fence, like only heat mould IF they don't break in after say 20 to 30 hours of riding.
@ThirtyandRollin
@ThirtyandRollin 3 года назад
​@@jetjaxon I am a fan of getting it done before I roll them. My thought is why wait for comfort and performance when it is designed to be heat molded right when you get them.
@panchymagogue
@panchymagogue 2 года назад
Did it. Helped but not enough. I think these skates are going to become the kid's which means that I get a new skate day in the future.
@panchymagogue
@panchymagogue 2 года назад
Remember to take the insoles out before baking, folks.
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Awww dang sorry to hear that. Well at least the kids will have some nice skates!
@MorbiousTactical
@MorbiousTactical 2 года назад
So as long as I have the IQ of at least a squirrel then I should be good and not have to worry about messing them up. Got it haha
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Exactly!
@ItachiUchiha-lr3yr
@ItachiUchiha-lr3yr 2 года назад
Don't heat mold them it does the opposite of what you want. You want a fat full liner that fills the skate & clings to your whole foot with pressure. If you heat mold them your basically making them like memory foam you are compressing them so now they are permanently squashed flat around your foot so not putting pressure on your foot or the inside skate of the skate. Imagine if you heat molded your sofa to your ass, it wouldn't give you support.
@ThirtyandRollin
@ThirtyandRollin 2 года назад
Only compressed in the areas your foot needs it to be compressed. The rest is still puffy.
@Lilgus84
@Lilgus84 Год назад
I just got my first pair of Faction skates which are heat moldable. Their instructions say to do it worh the linear in the boot/shell. Same temp but for 18-20 mins. I’m absolutely terrified that something will go wrong and I’ll ruin my skates. Have you ever moldable skates with the boot,strap, laces and linear all together for that time frame?
@ThirtyandRollin
@ThirtyandRollin Год назад
Ya it's really not too hot. But if you are nervous just shave off a few min. You should be fine though.
@Lilgus84
@Lilgus84 Год назад
@@ThirtyandRollin even with everything they are saying to include? I’m Mainly worrying about melting the plastic or integrity of the shell and boot.
Далее
EDGING ON INLINE SKATES!
15:13
Просмотров 23 тыс.
Looks realistic #tiktok
00:22
Просмотров 6 млн
Heat molding MyFit SPC skate liners
6:28
Просмотров 27 тыс.
Skate liners explained
14:20
Просмотров 13 тыс.
Intuition Premium Skate Liner Review
11:24
Просмотров 6 тыс.
HOW TO HOME FIT INTUITION LINERS // DIY MOLD
8:12
Просмотров 33 тыс.
How to flow on inline skates?!
16:06
Просмотров 35 тыс.
10 REASONS WHY YOU CANT SKATE
15:02
Просмотров 387 тыс.
Настоящая чемпионка
0:24
Просмотров 367 тыс.
Не надо толкать, надо бить🥊
0:20