No video :(

How To Hook Up a Tig Torch on Lincoln Ranger 225

Подписаться 974

Просмотров 40 тыс.

50% 1

Do you have a engine driven welder or any stick welder and wonder how to hook up a tig torch to it? Well in this video i show how you can do it!!!
In this first episode of Tig Tuesday I show how to hook up a scratch start Tig torch to my Lincoln Ranger 225. you can hook a scratch start Tig torch up to any constant current welding source! so any machine capable of stick welding can be turned into a Tig welder! All you need is a welder capable of stick welding, a scratch start Tig rig, and a bottle of argon and you can Tig weld!!! So after I finish showing you my welding setup I go on to show you a fusion weld of two plates of 1/8 inch mild steel.
TIG WELDING LEAD AFFILIATE LINKZ
TIG TORCH KIT AMAZON AFFILIATE LINK:
TIG TORCH CONSUMABLE KIT AMAZON AFFILIATE LINK:
-----------------------------------------------------------------------------------------------------------
I am using a Lincoln Ranger 225 engine driven welder as my power source
Welder review: • My Engine Drive Welder...
Radnor stinger
Radnor ground clamp
-----------------------------------------------------------------------------------------------------------
Adam's welding is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
I get commissions for purchases made through links in this post.
WELDING LEAD AMAZON AFFILIATE LINK:
DENSE CONNECTOR AMAZON AFFILIATE LINK:
WELDING GLOVES AMAZON AFFILIATE LINK:
JACKSON SAFETY WELDING HELMET AFFILIATE LINK:
DEWALT ANGLE GRINDER AMAZON AFFILIATE LINK:
TIG TORCH KIT AMAZON AFFILIATE LINK:
TIG TORCH CONSUMABLE KIT AMAZON AFFILIATE LINK:
-----------------------------------------------------------------------------------------------------------
Incase you are new to my channel.
I am Adam and this is my welding channel Adam's welding, I have been welding for a few years now and finally started up a channel on RU-vid to show some of my personal work and maybe teach some of you a tip or trick i have learned along the way. I hope you enjoy my channel! If you like my channel like, comment, subscribe, and click the little bell icon to be notified of my future videos!!!
About my channel: • ADAM'S WELDING CHANNEL...
My welding rig is a 1990 f350 7.3idi dually, with a Lincoln ranger 225
Rig Walkaround: • My Engine Drive Welder...
Welder review: • My Engine Drive Welder...
FACEBOOK: / adamsweldingrig
INSTAGRAM: / adam_welding
-----------------------------------------------------------------------------------------------------------
Playlists:
Welding rig playlist: • ADAM'S WELDING CHANNEL...
Stick welding playlist: • Stick welding

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@adamswelding5052 3 года назад

Hey I have added some affiliate links to my description go and check them out!

@luisuranga9212 2 года назад

Thank men I have been learn more from this videos than the school program thanks

@adamswelding5052 2 года назад

Congratulations if there is anything you would like me to do a video on to help you learn something you can always post I no the comments and I’ll do my best to either make a video about or explain in a comment

@codydayton3573 5 лет назад

I got the same machine . bought it new . 700 hrs on mine now . thanks for posting this video . I wanna hook up tig off my machine .

@adamswelding5052 5 лет назад

That’s awesome should serve you well one thing I would say is the tig arc off of it is strong and I don’t know any way to describe it other than harsh it’s great on thick material but ok at thin.

@adamswelding5052 5 лет назад

I hope you all like this new video of mine and this new series I'm starting up! If you like this video and would like to see more videos like it please dont forget to like, comment, subscribe and click the bell icon to be notified of my future videos!!!

@kirstenspencer3630 3 года назад

Yep that's how to do it. Been doing tig off my ranger for a decade. I use 2 percent lanthanum tungsten's and have a copper plate to start the arc on. I use a 17 tourch with valve. Can't use it on aluminum or outside as a breeze will blow the shielding gas away. Grind mill scale away as the melting point of the scale is around 3600 degrees F. I like E 70 s6 filler but if you are looking for the stack of dimes look the s 2 is preferred. Have fun. Make cash.

@adamswelding5052 3 года назад

Yup! Glad you enjoyed the video hope you look forwards to some projects I have coming up in the future

@jjakemo 2 года назад

Good video man. I just ordered me a torch and that really helped me out on how to rig it up.

@adamswelding5052 2 года назад

Glad I could help you it really has served me well over the past couple years though I never really did much tig welding most of what I ended up doing was stick or off a small mig welder run off the generator side of the machine

@enrique1765 4 года назад

your a hidden gem man here i thought you would need a seperate machine

@adamswelding5052 4 года назад

Thanks and not for steel and I’ve seen some old timers do aluminum on one too but I can’t can’t and I don’t think there are any codes any more that still allow it without hfac. But if there is anything you would like a video don’t on I’m fixing to start back up! Getting the rig back together in my next couple videos

@enrique1765 4 года назад

@@adamswelding5052 U can maybe be a little go pro n record the jobs youll be doing. Only guy i know that does that is austin ross n it sure is entertaining

@adamswelding5052 4 года назад

I tried but never could get it to turn out right. Might try it again down the road

@ericlopez7647 5 лет назад

Nice video Adam!

@adamswelding5052 5 лет назад

Thanks glad you like it!

@rigocarranza3588 5 лет назад

Man it's a very nice video 👍👌

@adamswelding5052 5 лет назад

Thank you!

@chiathach206 2 года назад

Have you ever run a tig welder like the dynasty series off of this generator welder ? I got a dynasty 280 base model ... I want to try running on my ranger for aluminum

@adamswelding5052 2 года назад

A tig welder no, but I have run the small flux core machine I showed in my video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hq5zQZBzC24.html , it ran ok only thing was it is a 120V machine and kept tripping the breaker one when run towards the max settings which was on anything thicker than 1/8”. If it was a machine capable of being run on 220v then I’m sure it would have handled it a lot better

@chiathach206 4 года назад

Thanks bro you just answer my question

@adamswelding5052 4 года назад

Glad I could help you! If you have any more questions don’t hesitate to ask if there is something I can do I will

@samanthaquintero273 2 года назад

Here's an important question, can you tig weld aluminum with the ranger?

@adamswelding5052 2 года назад

That’s a great question you can but you won’t be doing any code work on aluminum running off the ranger itself you can do dc aluminum but because it won’t have the cleaning action of AC it will not be pretty and can have some structural problems aswell as needing lots more clean up. If you want to do aluminum off of a ranger the best option it to run a smaller ac tig welder off the ranger or to get a spool gun setup for the ranger and spool gun the aluminum

@toniiflorrez5074 3 года назад

Great video! I have the same ma home and looking to tig, What amps are you set at if you don’t mind me asking

@adamswelding5052 3 года назад

I don’t really remember the exact amps I used in the video I believe I mentioned it in the video. I’d I did not mention it I am sorry.

@JesusSanchez-kj7xr Год назад

Amigo buenas sirve par soldadura tig aluminio

@luisuranga9212 2 года назад

Do you can install a pedal to this mode?? Thanks

@adamswelding5052 2 года назад

No once you strike the arc that is the amperage you don’t have a pedal with scratch start

@christianlaymance8773 2 года назад

We found where all the stolen cats have gone

@adamswelding5052 2 года назад

No stolen cats there that was a muffler and exhaust shop and more than half our business was referrals from other shops for cat replacements

@stacyburgdrof3728 3 года назад

Whats the size of the torch you run

@adamswelding5052 3 года назад

It’s a 17 air cooled style

@cowboybrad6288 5 лет назад

Kool

@adamswelding5052 5 лет назад

Glad you liked it

@cowboybrad6288 5 лет назад

Very informative some ppl don’t know how to use the machines. Awesome job bud

@adamswelding5052 5 лет назад

Thanks I try to make them as informative as I can but I still end up leaving some stuff out. But when I catch it on editing I try to annotate it in

@TraySixFive 4 года назад

I have a question whats the lowest amprage u can go

@adamswelding5052 4 года назад

Not exactly sure lowest I’ve gone is 55amps on some 16ga ss, I’ve heard lowest it will stabilize an arc is 40 amps but I haven’t tried it.

@TraySixFive 4 года назад

@@adamswelding5052 thanks for replying i was currious because i see its not digital and the first setting isnt top clear on whats the lowest amperage you can go

@adamswelding5052 4 года назад

Theoretically if you could get the arc to stabilize you could go lower but mine for sure has a very coarse arc and likes to blow holes in thin material easily, so I try to stay thicker than 1/8”

@travisfeltwater5664 3 года назад

So I don’t need a k930 if I hear you correctly

@adamswelding5052 3 года назад

What is a k930?

@joeanderson2468 Год назад

I have a question

@adamswelding5052 Год назад

What is the question

@joeanderson2468 Год назад

@@adamswelding5052 why doesn't my tig torch end don't fit to my Miller bobcat

@draco2202 Год назад

@@joeanderson2468 is yours a scratch start tig rig like pictured in the video? If so you should be able to just hook it up with a set of stick leads like I do in the video