Тёмный

How to inlay turquoise into rings and other Jewelry 

Dreamwood Rings
Подписаться 4,1 тыс.
Просмотров 25 тыс.
50% 1

This video we take the process a bit slower. We are just going to show the best way we use to inlay stones that may not all be the same size. From larger pieces to small dust, we use a few different methods here.
Check out our finish and polish methods here!
• How to get a Glass Fin...
Check out how we apply finish here!
• The Best Bentwood Fini...
Check out our Custom rings!
DreamWoodShop.com
Check out our ring making tools-
shopdreamwood.com/collections...
Our supplies-we are always adding new things!
shopdreamwood.com/
Some of what we use!
Paid Amazon Affiliate Links
Heater Water Kettle - amzn.to/3HOOccU
Veneer - amzn.to/309gwXq
Boring Head - amzn.to/3kjyvS6
3M Sandpaper - amzn.to/3mVflDC
Buck Tool Sander - amzn.to/305EenM
Rikon Bandsaw - amzn.to/3bPcjdY
Jet 1221 - amzn.to/3bSitd9
New Buffer - amzn.to/3bVPm8Z
Mitutoyo Callipers - amzn.to/3D9Dw6U
Cotton Polishing Wheels - amzn.to/3juosJe
Dremel polshing wheels - amzn.to/3JDgasN
3 piece Carbide tools - amzn.to/3J9yREj
Diamond Polishing set - amzn.to/3JxEoVw
for tungsten and ceramic

Хобби

Опубликовано:

 

11 апр 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 71   
@wendyrock4260
@wendyrock4260 2 месяца назад
I don't make this type of jewelry, but I find the process fascinating. Thanks for sharing.
@DreamwoodRings
@DreamwoodRings 2 месяца назад
Thanks for watching!
@yekeno
@yekeno Месяц назад
Fantastic
@DreamwoodRings
@DreamwoodRings Месяц назад
Thank you!
@giantfightingrobots-fightr9272
@giantfightingrobots-fightr9272 9 месяцев назад
I really appreciate the time you take to explain what you're doing and how it works! I make resin dice and have recently taken to doing gemstone inlay with the dice, and your videos have been one of the only resources I've come across that explains the process in a way that's transferable to work with dice vs. rings.
@DreamwoodRings
@DreamwoodRings 8 месяцев назад
So great to hear! Thank you for the nice comment and for watching!
@pathowell2807
@pathowell2807 3 месяца назад
beautiful rings! informative. :o)
@DreamwoodRings
@DreamwoodRings 3 месяца назад
Thank you Pat!
@iangochenour158
@iangochenour158 2 года назад
Very sleek!!
@DreamwoodRings
@DreamwoodRings 2 года назад
Thankyou!
@TylerDollarhide
@TylerDollarhide 2 года назад
I never thought to 3d print a mandrel holder. I should design my own to hold my mandrels from Patrick Adair. The rings look beautiful.
@DreamwoodRings
@DreamwoodRings 2 года назад
Yeah they are simple enough and make working on the ring so easy! And with the little catch at the bottom you don't lose material that falls off.
@marckrulewitch2403
@marckrulewitch2403 Год назад
What kind of glue did you use initially for the large pieces? Thick CA? Thin CA? Thanks.
@DreamwoodRings
@DreamwoodRings Год назад
For the big pieces I use a thick CA. Just a tiny amount.
@vincentlekei1969
@vincentlekei1969 Год назад
Wow cool looks amazing. Say how would you make a inlay ring with epoxy resin not uv epoxy resin but epoxy resin?
@DreamwoodRings
@DreamwoodRings Год назад
I have not actually made a ring with normal epoxy. I would guess either some sort of mold to hold the resin inside the channel, or a slow turn.
@vincentlekei1969
@vincentlekei1969 Год назад
@@DreamwoodRings oh okay sweet thanks 😊 👍
@DreamwoodRings
@DreamwoodRings Год назад
@@vincentlekei1969 of course! Thanks for watching. 😁
@jeremymoore2965
@jeremymoore2965 Год назад
What type of holder is that you have the ring on when it's on the lathe?
@DreamwoodRings
@DreamwoodRings Год назад
That would be called the Uni-Mandrel. Check out this video here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Kyqia1iol60.html
@jerryx2000
@jerryx2000 9 месяцев назад
Hi I am making a ring with my dogs hair. Do you recommend to stick the hair onto the ring with super glue and then pour epoxy resin onto the hair?
@DreamwoodRings
@DreamwoodRings 8 месяцев назад
I have never personally done something with hair or fur. However I think you have the right idea! A thin layer of glue, followed by hair to have it stick, then finish off with resin over top of it all!
@Zeeroo4life
@Zeeroo4life Месяц назад
@@DreamwoodRings Do you think there could be bonding issues over time between the resin and glue? I just got myself a setup to do something similar with the small agates I've found in my state. I'm not sure if I'll be doing much cutting into the agate pieces themselves and am curious of how to fill the negative space.
@richardbuckner4400
@richardbuckner4400 Год назад
How long did it take to learn this craft? How much equipment is necessary? I’m interested in learning how to do this.
@DreamwoodRings
@DreamwoodRings Год назад
Hey! We started super small on wood rings. Using a drill, some sand paper, and BSI CA glue with wood veneers. The ideal set up would be a lathe and some ring mandrels to hold rings on your lathe, with some tools. Maybe around $400. I should set up a video of everything needed for ring making. :D
@jojo_griott
@jojo_griott Год назад
I would also love to see this :)
@pathowell2807
@pathowell2807 3 месяца назад
please do the video!
@garymaylon2025
@garymaylon2025 2 месяца назад
My 10/12 mandrel is now in pieces because I couldn’t remove a ring project. I was using CA and the ring was stuck in several spots.
@DreamwoodRings
@DreamwoodRings 2 месяца назад
Shoot! The ring mandrels are acetone resistant, so sometimes using that can help get a ring unstuck. But Gary send me an message if it was one of our mandrels.
@vint-ageddiy9123
@vint-ageddiy9123 22 дня назад
Beautiful, What is the glass finish?
@DreamwoodRings
@DreamwoodRings 22 дня назад
Thank you! We finished these ones with a flex CA.
@vint-ageddiy9123
@vint-ageddiy9123 22 дня назад
@@DreamwoodRings I don't know what is it...
@DreamwoodRings
@DreamwoodRings 22 дня назад
@@vint-ageddiy9123 shopdreamwood.com/products/insta-flex-flexible-thin-ca-glue-bsi-adhesives
@jessbachman331
@jessbachman331 Год назад
What is that ring holder on your lathe?
@DreamwoodRings
@DreamwoodRings Год назад
We are using either a centering ring mandrel called unimandrel or standar expanding ring mandrel.
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
Nice! Where’d you get the 8 & 4mms?
@DreamwoodRings
@DreamwoodRings 2 года назад
They were sent by a jeweler. They don't do inlay work so they asked me to do it for them!
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
@@DreamwoodRings very cool. I like that. You ever fabricated your own inlay blank from stock and square wire? That seems to be the easiest way IMO. Expensive tho to practice. Doing it in silver is affordable tho, and good practice.
@DreamwoodRings
@DreamwoodRings 2 года назад
@@ErvinandMFantasyFootball I have not! I am not patient enough 😅 I did try silver stuff about 18 months ago but it never went anywhere. So the closest I have been was shaping that gold tube from our last gold and wood video.
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
@@DreamwoodRings yeah I remember, I talked to you about the RioGrande ones. Nice work on the tube inner sleeve fab btw. I was thinking of trying 0 gauge half round wire for an inside sleeve. It’s shallow round like a comfort band and already 8mm.
@garymaylon2025
@garymaylon2025 3 месяца назад
On the 8mm ring how wide is the channel opening width?😊
@DreamwoodRings
@DreamwoodRings 3 месяца назад
Hey! On this one I believe it was a 5-6mm width.
@MassimoLaGaipa-dt9ns
@MassimoLaGaipa-dt9ns 11 месяцев назад
Hi , i would like to make two custom rings , soupy sell the material ?
@DreamwoodRings
@DreamwoodRings 11 месяцев назад
Hi there! Yes we sell all the supplies here. shopdreamwood.com/
@roloprod
@roloprod 11 месяцев назад
Do you have a file for the 3D printed holder?
@DreamwoodRings
@DreamwoodRings 11 месяцев назад
Thanks for watching! We currently are not offering the file for sale.
@garymaylon2025
@garymaylon2025 3 месяца назад
What type of lathe do you use?
@DreamwoodRings
@DreamwoodRings 3 месяца назад
Have the equivalent of a PM 1022V as well as a jet 1221vs
@jacobsanchez770
@jacobsanchez770 Год назад
Where can I get one of these?!
@DreamwoodRings
@DreamwoodRings Год назад
We can set up a custom order for you. Email us at info@dreamwoodshop.com
@pauldejesus9644
@pauldejesus9644 2 месяца назад
where o you get the gold blanks
@DreamwoodRings
@DreamwoodRings 2 месяца назад
We make them. Send us a message of what you need and I can happily give you a quote. mydreamwoodrings@gmail.com
@rosieharris9961
@rosieharris9961 8 месяцев назад
what type of glue /sealant are you using?
@DreamwoodRings
@DreamwoodRings 7 месяцев назад
We use BSI thin CA for the inlay, and BSI thin flex for the finish.
@b.gemslapidary4246
@b.gemslapidary4246 6 месяцев назад
Hi, Do you mind posting picture of the glue/sealant you use? I searched it up and see there’s some different colors of BSI, and If you can do it I will really appreciate it. Thank you very much!!
@aricessig4404
@aricessig4404 4 месяца назад
When I use the carbide tool it knocks big chunks out and sometimes even the whole thing! Does that ever happen to you? Am I doing something wrong?
@goilo888
@goilo888 4 месяца назад
I’m not a lathe expert but it seems to me that perhaps your carbide tool isn’t sharp enough or you are going in too fast and hard.
@DreamwoodRings
@DreamwoodRings 4 месяца назад
Yeah, I think @goilo is right! You need to get a slow good tempo going depending on your material.
@mozartantonio1919
@mozartantonio1919 4 месяца назад
What is that glue?
@DreamwoodRings
@DreamwoodRings 4 месяца назад
We use a CA glue, either medium or thin.
@KarenKelleylucky
@KarenKelleylucky Год назад
If I sent you a ring could you add the turquoise for me? I want to add it to an initial ring.
@DreamwoodRings
@DreamwoodRings Год назад
Definitely so. Send us an email a info@dreamwoodshop.com !
@tonyandbevjordan7363
@tonyandbevjordan7363 10 месяцев назад
Carbon fibre mandrel and holder
@kfed5578
@kfed5578 2 года назад
Solid gold or gold plated?
@DreamwoodRings
@DreamwoodRings 2 года назад
These are solid gold!
@kfed5578
@kfed5578 2 года назад
@@DreamwoodRings nicely done sir
@DreamwoodRings
@DreamwoodRings 2 года назад
@@kfed5578 Thank you!
@VinceBoothe
@VinceBoothe 7 месяцев назад
You mean solid gold tungsten? So the gold won't scratch off?
@kfed5578
@kfed5578 7 месяцев назад
@@VinceBoothe read the comments
@tonyandbevjordan7363
@tonyandbevjordan7363 10 месяцев назад
Lost message
Далее
How to inlay Lapis into rings!
10:12
Просмотров 25 тыс.
REPLAY -Live Demo-  Ring inlay with UV resin
26:55
Просмотров 6 тыс.
Turquoise inlay my 5 minute video how to
5:05
Просмотров 87 тыс.
Crushing Stone For Inlays
7:25
Просмотров 42 тыс.
How to Make a Stone Inlay Ring with just a Dremel
5:49
Making a Ring Without a Lathe | Quick Cut 07
9:22
Просмотров 66 тыс.
#196 UV Resin Rings! Full Tutorial Step By Step
20:18
Самая старая пивная в Праге
0:11
Surprised 😳🤩🤩❤️🔥🥳
0:35
Просмотров 32 млн
Будни в пекарне. Часть 1
0:59
Просмотров 3 млн