Thank you for watching our video. We really hope this helps you out. Please let us know if you have any questions. Where to buy: bit.ly/14CorollaFender Visit us below if you need any other painted auto parts: www.revemoto.com
Hey man I appreciate you. I got a 2014 corolla got same kinda bent fender,door fine and also the hood and bumper got a scratch. I never would have know how to take that stuff off to get to those hidden bolts. I can see em on the new fender I bought. I was also worried about the bumper panel and how it came off. Thanks again. I sub and I am grateful for the vid.
I think you are referring to the bumper retainer/bracket. Or, the black boomerang piece below the fender nose. That is secured by bolts, I believe 2 10mm. A socket wrench will take those right off. Thank you for watching!
Hello, I have the same Corolla. My wife bumped a parking space stopper and now I believe I need to replace the bumper retainer on the car. The retainer isn't holding the bumper cover in place anymore. Before I go tearing it apart, kinda want to know how much time I need to set aside. Can i take the retainer off without removing the fender? If you reply, thank you in advance.
You do not have to remove the fender, you can just take off the bumper retainer. If the bumper isn't holding, you could probably do it in less than 1 hour. The bumper retainer has 2-3 bolts/screws holding it to the fender. It should be fairly quick, just reattach the bumper. Thanks for watching and good luck!
what would you do if the front of the fender was too low for the hood and short to the headlight (slightly larger gap from headlight to fender compared to other side). Would you look at the fender bracket that is just above the headlight retainer, if not what would cause it? I have a Yaris and similar shaped fender. Great vid btw.
Hello. Spacing issues can be fixed by adjusting the bolts and pushing the fender towards the door or headlight. It also depends on the damage. It seems like the gap between fender and hood too close? If I understood correctly. I would move the fender forward towards the light. I would also check the headlight and hood are correctly installed. Thank you for watching!
I will add the link for the fender removal. It shows how to take off 90% of the fender liner. We did not remove it for the video bc it's not needed. But, there are a a couple pins or screws that hold the liner to the frame further back behind the tire. If you remove those the liner comes off. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UyBlei_MO_4.html
@@daeron767 Hello! The fender liner is separate from the fender. You can see us remove a few push pins and screws. There is usually no more than a handful of them. You can use a panel clip removal tool or a flat-head screwdriver to pop them out. Please let us know if you have any questions.
Thank you. I believe the footage was corrupted but we only disconnected lining from the fender. I think around 6-7 clips around the liner and 2 bolts on the edges. Thanks again for watching!
You just have to find the bolts and clips and remove them. It's very similar to this model Corolla. Most the screws will be along the outer edge of the fender. You can use a flat-head screw driver to pop out the push pins. Use a ratchet set to take the small bolts out. Lastly, there may be some bolts on the corner of the bottom bumper.
Hi Sara, yes it will be the same. This will actually work for 2014-2019 Toyota Corolla models. Let us know once you're able to do it yourself. We'd also love to hear to improve our videos. Thanks for watching!
Hello and the fender we is an aftermarket fender. Actually, I think the one we took off was also an aftermarket fender. We guarantee fitment and color match on all our parts. Thanks for watching!
Hello Elizabeth! You can follow this link bit.ly/14CorollaFender for the fender. Feel free to chat with our staff if you have any questions about the color or fender. Thanks for watching!