How To Install a Cam on Sea Doo Rotax Engine 215 260 300 325 RXPX RXTX GTI GTX GTR WAKE FISH PRO

Подписаться 12 тыс.

Просмотров 10 тыс.

50% 1

How to install a Cam and Springs and retainers on any Rotax Engine/Motor 215, 260, 300, and 325. 1.5 and 1.6 liter
on any Sea-Doo RXP-X, RXT-X, GTI, GTX, GTR, WAKE, FISH PRO, SWITCH and many other Sea-Doo PWC Models
Parts Used in this video
Calas Performance Sea-Doo Titanium Retainer-Dual Valve- Spring Set
www.calasperfo...
Calas Performance Racing Billet Cam
www.calasperfo...
let's see what happen.
1:55 Removing the Rocker Bolts off Sea-Doo Rotax Engine
2:52 Springs and Retainers Replacement on Sea-Doo Rotax Engine
15:18 Removing a Cam on the Sea-Doo Rotax Engine
24:37 Installing a Cam on a Sea-Doo Rotax Engine
Be sure to check out The Calas Performance Tunes. Available now on www.calasperfo...
or email us at CalasPerformance@gmail.com
Be sure to follow me on
IG -0 / calasperformance
FB - / calasperformance
Check out my website
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#jetski
#mechanic
#seadoo
#dragrace
#techtips
#pwc
#marine
Director/Video Editor/Producer/Drone Pilot/
Dessie Vizcaino

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@HayPOWER-PR 9 месяцев назад

If you used some foamy to for the front washer?? Is safer to…big foamy 😅

@calasworld 9 месяцев назад

I usually put the foam there, but when I was filming, I totally forgot 🤷‍♂️🤣😂

@IRantweekly 9 месяцев назад

Should come to Gold Coast Australia one day mate. Its Flordria but 100x better on the water with all Canals etc! Another Great video tho!

@frankykei100 9 месяцев назад

Really Nice Video~👍👍👍

@andreteixeirapsg 9 месяцев назад

This chain thing is funny 😂

@davidbalan6571 7 месяцев назад

Once of the driver returns, just put on your PFDs, climb aboard and hit the water.

@cday6160 9 месяцев назад

Another great vid Calas!

@brandonhenderson7020 9 месяцев назад

very important don't drop this washer while shaking it over the hole lol Ernesto knows suspense

@jonhall5228 9 месяцев назад

Ernesto, this is the best yet. Absolutely fascinating. Thank you.

@DevonSpittleREAL 2 месяца назад

Do you need to upgrade the flywheel bolts with the modification too?

@calasworld 2 месяца назад

@@DevonSpittleREAL yes

@suprakillavr4 9 месяцев назад

He didn't specify in the video so I'll clarify: I suggest you do not reuse TTY (torque to yield) bolts like the rocker shaft bolts if you are not familiar on how to measure them for stretch. The rocker shaft bolts are notorious for breaking when reused because their yield range is really small if the torque angle step is done just a bit over by seadoo or yourself. I've measured every one I removed from factory skis and find more than 25% are stretched past the old manual reusable limit before seadoo changed the manuals to say just buy new every time they are removed. I never reuse them on customer skis but keep the "good" ones for myself because I'm a cheapass.

@DessiLu14 9 месяцев назад

This is a good tip 👍

@calasworld 9 месяцев назад

I missed that one🤦‍♂️

@billy-bo-dilly 9 месяцев назад

Torque to yield bolts like the ones used on the rockers are not to be reused. If you replace the crush washers, you will not have to mess with the silicone.

@jakepivac 9 месяцев назад

What colour spring is in the tial? Can't be yellow if it's open on idle..? Only asking as I'm not sure what colour spring to use for mine. I have 142 wheel

@calasworld 9 месяцев назад

If you have a Fizzle kit, you’re fine this particular client end up changing the spring later for one that was not open on idle

@mrfiera Месяц назад

Hello , I did my cam too and I forgot to put it on time and lock it before pulling the cam out . When I put everything together I broke all three bolts from the cam . What else can happen to the engine by me doing that ? I’m waiting for the bolts and put it back on is there anything for me to check ? Thanks

@brucecooley4170 9 месяцев назад

Really detailed instructions. You are upping your game on how to videos. Thanks. Of course you want us all to order a camshaft!😀

@jetson328 9 месяцев назад

Excellent instructions, thanks

@jordigrau3625 9 месяцев назад

Thank you for this video full of great information.!!

@mesutaltungok1639 9 месяцев назад

HARİKASIN

@jasonmekush5280 9 месяцев назад

Will injectors dump fuel if fuel pump is not running

@LiosuanLeon-lh2zx 9 месяцев назад

I believe you’ll still have fuel in the line even if the pump it’s not running. You’ll have to disconnect the hose to the fuel rail. It’s easier to just disconnect the injectors and avoid the gas smell and the mess. 👍🏻

@calasworld 9 месяцев назад

The reason why I say that is because after everything is done, I like to spin the motor so everything gets lubricated without the motor running

@Wetlife0069 9 месяцев назад

First….08 rxpx 255 stage 3+

@miguelvelazquez7952 9 месяцев назад

Me gustaría ir a tu casa para me bregues con mi sea Doo ya que acá ay mucho mecánico se no saben bregar con sea Doo pero aprendo mucho viendo tus videos 👍🏻👍🏻👍🏻🇵🇷🇵🇷🇵🇷

@calasworld 9 месяцев назад

Gracia

@DessiLu14 9 месяцев назад

17:20 it would be a good idea to use that foam piece to prevent the washer from droppin in the motor

@calasworld 9 месяцев назад

Yes, I forgot to put it on good point

@johnbeck6008 6 месяцев назад

If I order your cam, spring retainers and springs from you, is there anything else I need? I’m currently running JP stage one, oil catch can, air intake and solas 13/18. Running 2020 RXTX 300. Also have fizzle piping, no blow off valve and no fizzle intercooler. Just looking for a little more top end but want it reliable, not sure if I need another tune or I can leave it as is with JP stage one flash that was done. Great video and eager to tackle this upgrade myself. I probably watched this video 10 times to make sure I didnt miss anything on install. 😂

@coltonconnor112 7 месяцев назад

Would love to know how much this would be if I brought my seadoo to you.

@calasworld 7 месяцев назад

It’s actually not that much money for what you getting

@quinnsmith6119 8 месяцев назад

Would this cam be ok to use on a 230 motor with your CALAS valve springs and titanium retainers?

@calasworld 8 месяцев назад

Yes

@quinnsmith6119 8 месяцев назад

Thank you and are the superchargers the same on the 230 as the 300 would it be safe to do a 300 tune with your cam?

@stewardmiddleton2756 5 месяцев назад

U are the best..I watch all your videos. I'm from Chicago. Your a funny guy. 😂

@BrendonVuurman-le8rb 8 месяцев назад

Great video as always and super clean ski!! @Calas the cam gear bolts would the 21 and up bolts be a good upgrade for a 260hp engine ? Or better to use ARP bolts or 12.9 Allen head bolts ?

@calasworld 8 месяцев назад

21 and up are good

@BrendonVuurman-le8rb 8 месяцев назад

Thank you sir 🙌🏼

@racerx2084 9 месяцев назад

How much pressure in the air hose do you use? Do you have a regulator on the compressor? Bc I’ve seen were to much air can go in and push on the engine and rotate it. Also seen where people lock the engines up in some way from spinning.

@calasworld 8 месяцев назад

I’ve never seen an engine spin over since I’ve been doing this

@james-goldcoast 8 месяцев назад

How do these run with stock SC, does it make a big difference? worth doing?

@calasworld 8 месяцев назад

Yes, big difference and it’s worth it

@derargentinier8879 9 месяцев назад

buen trabajo calas ! espectacular

@gsxjiffy6076 9 месяцев назад

He washes and dries engine and uses Yamaha lube for what? Sprays the engine with it? I use 2R Yamalube in all my 2 strokes but you lost me here.

@arielzayas1618 9 месяцев назад

Saludos Ernesto. Que tiene que ver el IBR con el camshaft.. instale uno y estoy teniendo problemas con el IBR. Te ha pasado? Gracias

@calasworld 9 месяцев назад

El problema es que el tuneo no esta bien i en Baja los RPM suven y bajan quando eso pasa el voltaje suve y baja la computadora no le justa porque no es bueno para el IBR entonce de da la luz del IBR Mi español no es muy bueno