It is a Greddy Racing Ti-C exhaust. It is actually discontinued but if you're interested in it, i'm selling mine for cheap. Send me a message at milanmastracci@gmail.com if you're interested.
Youre pretty meticulous with these videos. I like that. Youve pretty much covered alot of the general things average DIY will get into. Keep up to great work.
+milanmastracci how easy is it to work on a Japanese car? I want to learn manual in a 94 240sx so I can turn it in to a project car, BTW awesome channel very in dept, I just decided to subscribe
Exhaust hanger removal tool?! You guys have tools for literally everything! Probably explains why my knuckles are so beat up from having to 'improvise' a lot lol! Exhaust hanger removal tool?!
+GTiR23 www.amazon.com/Lisle-38350-Exhaust-Removal-Pliers/dp/B0012S9A5U/ref=sr_1_1?ie=UTF8&qid=1437606804&sr=8-1&keywords=lisle+exhaust+hanger+plier I bought them right after I finished working on my car ahah
Right now I have a g35 and I have the exhaust straight piped I get a lot of attention from people but not from the cops since it's not illegal to have a loud exhaust
just so you know all Honda's make that same intake sound and you hear it more if your Honda has a VTech System my 2002 Honda accord coupe EX V6 makes that sound its amazing it sounds like a mini turbo or blow off valve. and by the way Nice Honda
I have watched a majority of your Accord Coupe i4 videos.. I have an 08 Accord Coupe i4 and noticed on your Ktuner you put rv6 downpipe, Takeda SRA intake and exhaust. My question is did you go back into your Ktuner and adjust putting back on the Stock muffler?
Should I worry about buying an aftermarket exhaust for my 2012 Mustang V6 that won’t fit? Is that ever a concern? Or do they all just fit under the car
Better yet install a 2 1/2' piping with cat and magnaflow muffler and magnaflow tip like i did on my 280zx :) sounds like no other sport car around. Definitely sticks out from the ricers.
Like some others mentioned use wd40 for the hangers even if it cause some premature wear on rubber...better than wasting a whole day trying to remove them if you haven't got a tool
When you change this exhaust is it the same exhaust or a different exhaust. I have an 08 Ford ranger that has a weeping hole that drains water. If I change this out to a cat back will that still have a weeping hole. Does that improve any difference if it is removed or not ?
The fact that you have to buy all those things to jack up the car and to remove the exhaust, basically cancels any savings you couldve had from doing it yourself and considering most people just install a new exhaust and be done with it, might as well just pay a pro to do it right
Well once you buy the tools to get it done, it won't cost you a dime the second time around. I'd rather buy the tools to do something, instead of paying someone to do it for me.
What happens if you live in an apartment complex? I'm kind of afraid to get under the car with those 4 jack stands, what if they fail? Of course, they shouldn't fail but there is always that thought
Any opinions on a torxe catback exhaust? I got a 2015 civic ex and just ordered the exhaust for it. Is the installation the same if not at least similar to the one in this video?
I just got the same car but the 2011 year. I was wondering what catback exhaust would fit my car or if I can make almost any exhaust system fit my car?
cat back is all good and well but dog back Exhaust is the best for maximum doge performance(1 doge power = 50 horsepower) and putting or installing a dog Exhaust typically gives u addition 50 dp (doge power )
I have an 05 accord that for some reason is already pretty noisy and I wanna make it the loudest cringe Honda ever but I don’t know a whole lot. Could I safely (not legally) drive with no exhaust just like how he had it set up at 4:08
Question bro. I just got a 2.4l Honda Accord coupe 2010. Its single side exhaust but i want it to look like the v6 exhaust on both sides since the bumper already have the cutout for it. Can you help and where can i buy?
+David Scott Not really. You might see a TINY gain but nothing where it will be extremely noticeable. More often than not, you just get to have a bit more noise when you accelerate, and a nicer looking engine bay. Thats about it :)
anytime u upgrade intake u have to put muffler on for better flow if u dont ur exhuast which is stock well hold back power now that u full upgrade how do it fell
+meer khan With that being said, a muffler will not make a difference, you will need to change your catalytic converter to high-flow cats, along with changing the entire cat-back piping. The best way to get a performance gain, is to remove the largest restrictions closest to the engine. So changing your cats will be more effective than changing your muffler, as your muffler is further down the exhaust system. For an intake, if you just slap that on, you might not get a performance gain. You will also have to install a larger throttle body along with making the intake runners larger to accommodate for the extra air flow.
fake blow off valve attachment on end of exhaust, couple nismo and nos stickers. big fat honda sticker over the tinted upper portion of windshield. fart can exhaust tip from autozone. should give you 120+hp.
fake blow off valve attachment on end of exhaust, couple nismo and nos stickers. big fat honda sticker over the tinted upper portion of windshield. fart can exhaust tip from autozone. should give you 120+hp.
I'm installing an after market exhaust on my cobalt but my exhaust is like two inches and the one Ima order is 3.5 and I need to Leave my cat because of emission, will it just Bolt on the stock cat? Or do I need to buy new headers and a bigger cat? I've never done this before since this is my first car lol.
Hey Milan! I was wondering if it's possible to install the v6 accord dual exhaust system in the 2.4 version and you seem to be the right person to ask that! Haha. Great vids btw!!
+Alejandro Portillo Hey Alejandro!! You by all means can :) When you install the dual exhuast, you will need to buy the hangers for the driver side (because there are none on the i4) but you can install it and make it a dual.
imdarrellkthx No lights nothing. We only changed the system from the secondary catalytic converter-back, and there aren't any sensors or anything back there so you could have taken the exhaust off completely, and you would still not get a Check Engine Light. The only time you MIGHT get a light is if you remove your Catalytic Converters and don't install a defouler.
Go with an intake than. You'll be able to hear some very aggressive tones for a fraction of what a full exhaust will cost. 300 for an intake isn't that bad. Look at Gruppe M and find an intake that is less than 500 bucks.. Good luck
+Divisionsixty No. The only time that it would stress the engine is if you run with a smaller than stock size exhaust, which I have never seen by any exhaust manufacturer
+Victor dARKO Yes you hear rasp only because I removed my catalytic converters. If you leave them in the car, you won't get any. If you have a stock car, and then throw on a cat-back exhaust, you will simply have a different tone from the car, without any raspiness.
I have a stock 2015 accord coupe v6 man. I want to make it sound mean. What do you suggest. And what website can i use to buy things like exhausts/intakes etc?
Bill Orton I would suggest YouTubing '2015 Honda Accord Coupe V6 Exhaust' and finding which type of system you find sounds nice. After that, google the system you found and buy it from wherever you can get it cheaper.
zach manzano Zach it really depends on what car you have, and what is the size of the engine as the exhaust note is really the noise coming from each of your cylinders, and if it is being muted, altered or silenced by turbocharger (if you have one equipped), your catalytic converters, your resonators, mufflers, and piping size.
+MrRangerZr1 Depends on what you want. The reason I went with the delete is because they came with a defouler, so it tricks the computer to think everything is fine, while giving me no restriction close to the engine. If you go with the HFPC you won't have to worry about emissions, while getting a nice littler performance jump :) Your choice buddy!!
I've never heard of that before. Just keep in mind that if you go with PCD's and remove all restrictions from your exhaust system, your engine will breathe better. Now whatever valvetrain noise is i'm not sure, but it will be louder than stock and you'll be able to hear the engine noise a lot better.
milanmastracci a video would really help in going through all your tools. Fall is approaching soon and I want to change my tires this time using the proper tools!
Driftblock350 It all depends on how complex the system is. If its a system for a 350z, just note that it is a dual exhaust which means they have more to install. When I got my exhaust installed 3 years ago, just the cat-back, i think they charged me like 180 bucks, and at that point, I had all of the hardware needed. So I had my cat-back system, the gaskets needed, along with all of the replacement bolts.
MrChris2Fur It all depends on what you want your car to sound like and what YOU like. I love a car you can hear, so an exhaust and intake are a must for me :)
Ahah I'm not entirely sure actually. I do like how it sounds right now only because I have my cats deleted. Its loud, noticeable, but not super obnoxious. We'll see :)
I know what you mean!! Those magna flows I showed you are probably one of the nicest exhausts you can get for the accord :) it'd be killer if you got it lol
When I was younger I would always get under the car while only held in the air by 1 jack. Now that I'm older and realize how much I could get fucked up by a car falling on me, that shit scares the hell out of me
I have a k24a4 accord but my engine cover is gray how did you paint it red? did you remove the sticker and put it back did you use thermal paint? and also the throttle body looks cool, how did you do it or where can I get it done? thanks in advance @milanmastracci
+Gus Stalin Yeah I removed the sticker with a heat gun, and then painted it red. The same paint actually for my brake callipers so it matched!! I installed a throttle body spacer :)
Can someone please tell me the name of that mesh like part at 4:42 - www.screencast.com/t/BjH5fzw6. It's slightly torn on my car, so just wondering if that needs immediate change. Thank you for the help!
+ARCH. M Stock. The engine from Honda is a 2.4L inline 4 with vtec. When it hits 5000 RPM's, the valves open up longer than normal creating more power.
+Kenny Wells Of course there is. The exhaust itself will be longer for the sedan as the chassis is different between the two. It is only inches longer however that alone will make the coupe exhaust not fit for the sedan and vice versa.
it doesnt have a heat rating as far as i know. im no expert, but id say its probably melted off already depending upon how he drives. and hes a kid with a honda, so...probably melted.
It took me a night to take everything out carefully, paint it, let it dry and cure overnight, and then the following morning I put everything back together. As long as you don't rush anything, you'll be fine. Its an easy DIY if you ask me
+milanmastracci On my Catback exhaust install I removed the resonator and replaced it with a straight pipe. Now it sounds more aggressive. Do you pass emissions without a catalytic converter?
