How To Install A Pool Cue Joint Pin

Подписаться 18 тыс.

Просмотров 51 тыс.

50% 1

I have been asked by a few people my process in installing the joint pins into my pool cue and I thought instead of having to explain my process each and every time I would just make a quick video on it. Now I would like to point out that a lot of guys do thread their pins into the butt section and that is also a great way to do this process. That being said I have just had way more luck with the none threaded process in getting the pins perfectly straight.
Check out jaynewoodworking.com for more videos and articles
Follow me on facebook / jpaynewoodworking and / paynecues
Make sure to subscribe!
For daily videos and photos follow me on Instagram: jpaynewoodworking.
Also follow me on facebook: Jpayne-Woodw...
Show you support by using simply clicking some of the links below:
Total Boat Epoxy: totalboat.refr.cc/jeremyp Use this link to get up to 15% off your purchase
Black Diamond Pigments: www.blackdiamondpigments.com/ Use Code JPW20 to get 20% off of your purchase.
Silicon mold: amzn.to/2CXJ3k3
Pressure Tank: amzn.to/2wLyzUD
Band saw: amzn.to/2T3bNjP
Other tools seen in the shop:
Dewalt Combo set: amzn.to/306ERaI
Dewalt Miter Saw: amzn.to/2JM4zvE
Rockler Pro Router Lift: amzn.to/2r9QEsP
Metabo C10RJ Table Saw: amzn.to/2Xu4OEE
Music:
Track: STAR SEED - Cayenne (feat. Zoe Moon) [NCS Release] Music provided by NoCopyrightSounds. Watch: • STAR SEED - Cayenne (f... Free Download / Stream: ncs.io/Cayenne

Хобби

Опубликовано:

9 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@JH-fk8ow 9 месяцев назад

''I would like to point out that a lot of guys do thread their pins into the butt section and that is also a great way to do this process'' all the real cue makers tap them because its really the only right way to do this. i have never before seen anyone just push it in untapped hole for very obvious reasons, you are the first.

@Anyoneyt691 Месяц назад

I got a tap and pin coming in the mail today. I was hoping to see him tap the hole also. Thats what ill be doing

@TheBanomanew 2 года назад

Yes finally a new video with cue building!

@mikejackson739 2 года назад

Hey JPayne I have watched all of your videos. I know you have been busy but I was wondering when you was going to put out the video you said you were going to do on how you made the pressure chamber you do your cues in. Would love the info on that... Thanks!!!!

@bodeine454 2 года назад

I'm going to make my wife a walking stick with a horizontal handle on top and it's probably going to be about the diameter of a pool stick in the middle where it will join(my mini lathe doesn't have an extension so I'm limited to what length I can turn). I haven't got the details figured out yet on exactly how I'm going to do it but I'll probably taper it some from the middle towards the bottom. Do you think a pool stick joint like you installed in this video would be a good and strong option or do you know if there's a better way? Also, that stick looked like it had blue or purple florescent epoxy embedded into it which looks really nice, is that epoxy that's been filled into voids or is it just an outside finish or ??? I'd like to try to make something similar. Also, do you mind telling me what kind of wood was used to make that stick? Thanks for the video 👍

@rodricjohnson5950 2 года назад

I mess around with cue making part time and I highly recommend you start threading your joints. Maple swells and contracts quite a bit, especially if a cue is left in the trunk. That movement will lead to the wood pulling away from the epoxy. The last thing you want for your business is a cue or multiple cues showing up in a billiard forum because the joint let go a year or two down the road.

@jpaynewoodworking7510 2 года назад

Okay so actually you proved my point more on why it would possibly be detrimental even in the long run it to thread in the joint pin. 41 a mini hi into makers do not threaten their joint pins I look into it a lot as I was learning to make cues secondly if people are worried about wood swelling and movement it goes the same way if you cut threads and then a thread in that insert. This would mean that a portion of the threads could swell or move at different rates than another section causing the pain to actually shift in one specific location and actually become out of true. The third part is I know a lot of people don't think about it but plain and simple if you're leaving your cues in a vehicle constantly then to be honest in my opinion you don't have a whole lot of room to complain when things go wrong at all. Kind of like the idea of someone slamming their cue on the table and then getting mad when it breaks. Do you mistreat things are do not put take proper care of them no matter how well they are built or what they're made out of they eventually will take a damaged or fail. I do appreciate the comment and for watching tho thank you.

@rodricjohnson5950 2 года назад

@@jpaynewoodworking7510 the problem with your joint alignment theory is the mechanical bond of the threads and screwing the pin in all the way and giving it a slight bit of torque. There is absolutely no mechanical advantage the a chemical bond has over a chemical+mechanical bond. I'm just saying I've seen it happen in jump cues where the butt wasn't threaded. And while I don't do it myself many people leave there sticks in the car. I have friends whole leave there schons in the car. Leaving a cue in the car might lead to shaft warpage at the most, it shouldn't lead to a possible mechanical failure in the butt. While it might be easier to do it that way there's no long term advantage to not threading the joint pin.

@donh1537 2 года назад

@@rodricjohnson5950 ive left my schons in car trunk for last 20 years with no issues, this includes winters in chicago and new mexico, and summers in florida and arizona.

@rodricjohnson5950 2 года назад

@@donh1537 schon uses extremely dry wood plus there's a little luck in involved with too. I actually know a few people in Florida who leave there schons in the car and some are straight and some aren't. I doubt he's using schon quality of wood on the inside of cues

@johnnyroc 2 месяца назад

How much do you charge to replace a 5/16x18 pin on a butt to 5/16x14? Where are you located?

@fmontenegro2008 Год назад

G00d video

@Jmmac104 6 месяцев назад

Is there any quick fix if your cue feels loose when you screw it together?

@Maverick70ful Год назад

Wonderful !!!! How much is this ??

@pmayh3m Год назад

How would you switch the joint pin of one that is already installed?

@carlmoon8585 2 года назад

Do you preform repair jobs on cues?

@omargonzalezb 9 месяцев назад

Hi, I have cue that I will like to have refurbished, do you do kind of thing?

@ProudlyElongo Год назад

What kind of joint is that? It looks exactly the same as mine. Is 5x16? Thanks

@TheSweetnessjosh 2 года назад

You should do a video cue tip repair

@BMR_10 2 года назад

hope its all alright, come back with more if you can, keep the rhythm, and keep it going man

@jpaynewoodworking7510 2 года назад

Tyim working on getting more content out.

@taylorknight8375 Год назад

Jpayne, I have a small bent pin on my stick. Is there a way I could ship it to you and I could pay you to fix it for me??

@larrymeyers7200 2 года назад

Can you do a predator uni-lock video? Depth wise and such. Please , thank you

@jpaynewoodworking7510 2 года назад

I'm sure I will at some point

@nickscott9067 Год назад

Great work . Question: what type of lathe is that ? As in; how the cue is chucked at the middle/end of the cue . Does the cue go through the motor. My normal wood lathe isn’t built anything like that mechanically speaking . Realizing that this question is a lot more difficult to explain than I expected.. if any of that makes sense I’d appreciate a little help in what to call a lathe like that .. thanks -Nick scott

@anotherOneMore7 2 года назад

Do you have a link to where to get the lathe?

@brucemiller1696 2 года назад

Maybe cue smith.

@jonathancoolkid115 Год назад

My grandpa gave me his old pool sticks and a few when you screw the joints together the shaft and the butt end don’t align in the middle

@jonathancoolkid115 Год назад

How do you fix it?

@derbyjakemalazarte8973 Год назад

Are you using a pool cue lathe?

@Xande994 2 года назад

How about the other end of the pin?

@jpaynewoodworking7510 2 года назад

Hu?

@erwingvela Год назад

How much a pool cue cost??

@dcalf1 Год назад

why wouldn't you tap the hole??

@eddiesmurfy 10 месяцев назад

I see alot of overhang between the butt and shaft at 4:18

@johncrawford9698 2 года назад

Why not thread it for more stability

@jpaynewoodworking7510 2 года назад

Some makes do but also threading and also lead to more room for the pin to install slightly out of line. This is the process iv had the most success with getting the pin perfectly straight. Been doing this a while now and never had a pin lossen up. Jb weld has a breaking strength of like 3000 psi so if your tightening the shaft that much your gonna damage the shaft eventually

@brianlannoo5511 2 года назад

No way! I want mine threaded in. But you are using a sloppy lathe more than.0005 out.

@ericsternberg938 2 года назад

I think you have an extra 0 or two in your runout measurement. .0005 would be .013mm out. That would be perfectly acceptable even at the spindle. The three jaw chuck would multiply that number but it isn't going to bring it close to being an issue. Look, I thread too. I don't live thread simply because of the time that it takes so set up the assembly. I step drill and thread as I have for 20+ years. It adds stability as well as reducing the chance for rattle from the epoxy breaking away over time through vibration. I agree 100% with that part. Regarding the lathe, the Hightower lathe is perfectly fine for this operation. A big bench lathe is certainly an upgrade but to call it "sloppy" is a misnomer. In comparison to a 6K bench lathe, sure it will not be as accurate because of bearings as well as simple weight. But let's not a product that has been out there turning out cues and repairing cues for 30 years. JPayne, 1. Keep up the learning and experimenting. We wouldn't have ever made short spliced points if it weren't so "radical's" experimenting with offsetting a tailstock and using a router. 2. Consider trying some experiments (if you haven't done so already) with threaded vs unthreaded over time and see where you land. Definitely thread your A-Joint as the potential for rattle will increase dramatically with no threads to seat to. Good luck!

@jpaynewoodworking7510 2 года назад

In curious where you are getting my supposed runout measurements? Plz tell me sir where a single person on this earth would see any difference with even double your imagined number of run out at .001. That is one one one thousands! And never had a single pin pull loose. Tha ks for watching though.

@jpaynewoodworking7510 2 года назад

Hey thanks and yea I have experimented alot and always had problems with threading in the pins. So when to this process and been no issues since. I appreciate it and the advice tho. Thank you