How to Install AMP Research Power Step on a 2020 Ram 2500

Подписаться 106 тыс.

Просмотров 55 тыс.

50% 1

realtruck.com/p/amp-research-...
The Amp Research PowerStep Running Boards is an electronic running board that tucks under the truck when the doors are closed, but once the door opens the running boards will quickly extend out to provide a step. This will save you ground clearance while you're driving but, makes life easier with its automatic motion. Built with Anti-Pinch technology, these running boards are made with safety in mind. If the running board feels any resistance when retracting, they will re-lower so the obstruction can be removed.
Stay Informed and Sign Up:
www.realtruck.com/newsletter-s...
Subscribe to our Channel: / realtruck
Free shipping for orders over $100!

Авто/Мото

Опубликовано:

6 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@johndormady880 Год назад

Thanks for the video. It was great help today.

@kz2s-kevin330 Год назад

I moved the right side step so the end cap (of the rear mounted idler) is at the mounting bracket...so about 3/4 of an each from perfectly centered. After this adjustment I did not have any interference from the pinch weld (it was hanging-up previously at the radius of the pinch weld bend ).

@nevarezfamily9291 2 года назад

Thank you for the video!

@reinaldocerdeira8590 Год назад

Thanks for the video. Can you please explain why you didn’t install the front spacer ?

@VietLe-USA 6 месяцев назад

Thanks for the detailed instructional video, the best on RU-vid regarding AMP Research installation. Although mine is the Tundra, I learn a lot from your video.

@FredetteShawn 2 года назад

Excellent video

@_WELDR_ 11 месяцев назад

Great video 👍🏼 installing yourself will save at least a couple hundred bucks. Plus you’ll do it nice and how you want it done ! I hade LINE-X install mine and well long story short I had to re wire everything do to wires were all over my engine bay 🙄😬

@navymark101 Год назад

Great video, I'll be ordering those for my 2021 RAM 2500 in the next few months. I like the looks of your 2500, what size tires and brand are you running on that beauty and lift/ level. Thanks for the info, Navy Mark...

@Realtruck Год назад

Hey Mark! On our Ram 2500, we have the Supreme Suspension 3in leveling kit with 37x11.50 Nitto Trail Grappler M/T tires.

@goducgo 2 года назад

One of my steps won’t go back up. Fuse is good lights work. Any ideas?

@Ahleen0 3 дня назад

هل تعلم اين أجد التروس الدآخليه لمحرك دعسه يوكن دينالي ٢٠١٤

@emilyscandycakes4530 7 месяцев назад

Does 22 2500 ram have factory plugs for these step ?..i see 2 capped plugs

@user-ud2rc8ri4h 9 месяцев назад

Will this application work on the 2021 Ram Power Wagon? I have been told that there is something under the body that wont allow the XL to be placed.

@NoInformation-nr3eq 2 месяца назад

air tank/pump, you can relocate it

@larrytolentino7909 2 года назад

Did you need to trim the pinch weld

@kodiei5819 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ITbAeixVKdQ.html

@garcia1283 2 года назад

Is there a way to wire it up without using the OBD II?

@Realtruck 2 года назад

Hey there! Unfortunately not, but Amp-Research also makes a pass through harness that you can use if you want to also run a tuner/monitor or anything else that requires an open OBD2 port. :)

@hydro_rebel7741 2 года назад

Ugh I want to put a set of these on my rebel but seems like more time than I would have.

@Savage1Living 6 месяцев назад

Do it. You can do the install one step at a time as you see fit. That is what I did. One day I did the first step for all 4 corners i.e. installing the bracket inside frame, doing the pop rivet, and nutserts. Took about 20 minutes. Next day I bolted the mounts/motors/steps on. Took about 30 minutes. 3rd day I did the wiring. That took a good 2hrs. I took my time, strategically routed everything under the hood/firewall.

@juliancortes3379 2 года назад

Thank you for the video. Unfortunately my amp steps are giving me fitment issues, they keep getting stuck inside the pinch weld.

@Realtruck 2 года назад

Sorry to hear that :(

@EduardoLopez-xk3dk 2 года назад

Did you figure out the problem? I am currently having the same issue

@heathpalmer4283 2 года назад

Have you tried the bounce technique?

@kodiei5819 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ITbAeixVKdQ.html since real truck can't read

@djcallioux2635 2 года назад

Can you touch on what you did with the pinch welds I've done a hundred of these dodges and the pinch weld always causes the step to hang up are you grinding the pinch weld also there has got to be a better remedy. I've even started building stoppers so the step don't go all the way up