The delay is the time you have between shift so a good starting point in 100 then once you get used to the no lift shift you go down to 75 then perfect spot for me is 50
Do you know how to wire the green wire to a switch for automatics? I don’t have a clutch and I want the green wire that would go to a clutch to a switch but don’t know how to
No that means that something on the jump harness for the clutch is wrong, if you put the oem connector back to the clutch switch does it work as it should?
@@PJBWERKZ if I unplug it and put the stock connection , it'll start normally clutch pushed in. If I plug the pnp harness back on it'll start without the clutch and won't start if the clutch pedal is pushed in. 2 step works and wot shift works as it should tho
@@PJBWERKZ I think I figured it out. I sent a post to your ig pjb page. Looks like the pnp harness is twisted 180 between the clutch switch. So it moves the green wire from 1 side to the opposite
Hey sir , do u need to modify the wot box or does come with default mode when brand new or do u need to change anything in the settings. Please let me know sir , and thank you
@@PJBWERKZ okay 👍🏼 thank very much for helpful video , I recently finish installing the wot box on my srt4 and install MPx 62 mm throttle body it’s sound nice 👍🏼 once again thank you
Hey buddy sorry to bother u sir , I am issued with my wot box , when testing for tps and press the gas pedal all way but no led flash, why , can help me out please
Ok so when you put the key on you see the blue light come on and that's when you need to press the gas all to way down and it should blink you only have about 10 sec