How to INSTALL and USE BMW scanner 1.4 (EASY Diagnostics and coding)

Подписаться 62 тыс.

Просмотров 92 тыс.

50% 1

How to INSTALL and USE BMW scanner 1.4 on Windows 10 (EASY Diagnostics and coding). This software is an alternative to INPA and NCS expert that is much easier to use. I also go over how to fix the common "Hardware not ready" error message on windows 10.
Link to buy BMW Scanner 1.4: amzn.to/3mlfMUg
Link to Software: drive.google.com/drive/folder...
More info on BMW Scanner 1.4: www.e46fanatics.com/threads/b...
CHECK OUT MY AMAZON STORE: www.amazon.com/shop/evangoyuk
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
HELP SUPPORT THE CHANNEL: www.paypal.me/evangoyuk
This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you.
BMW e46
BMW 325i
BMW 330i
BMW 330ci
BMW m3
Bmw Scanner
PA SOFT
ISTA D
IST P
INPA
NCS EXPERT
WIndows 10
#BMW #CODING #DIAGNOSTICS This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

Авто/Мото

Опубликовано:

14 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 348

@Unpluggedat52 Год назад

Just got my BMW 1.4 interface today. Using the steps in this video made the install smooth as butter. My interface even statred "For XP Only". Working great on Win 10 !! Thanks Evan

@TristanLang 2 года назад

Thank You Evan !!! The effort you spend is very much appreciated! U R A rockstar!!!

@paulterhaar4862 3 года назад

Just bought it for my '97 E39, thx for the manual and the software.

@AzzaButter 4 месяца назад

Mate you are an absolute legend! That worked a treat. For those playing at home if you get the faulty error issue you have to have it plugged into the care first.

@matthewfard2196 5 месяцев назад

Fantastic. Works on Windows 11 too. Similar to someone else, I got an error message “hardware faulty”. However, after connecting the scanner to the car and relaunching the app, it worked perfectly.

@randyfleet9968 3 года назад

Just got my module and cable today and I'm thrilled. I have INPA as well but es specht nur in Deutsch! This one speaks American.

@jakeharris2159 Год назад

First of all I wasn’t aware first time starting the application after installing drivers has to be done connected to the car or an error message will appear. Secondly, THANK YOU! I got a set of xenon’s for my facelift convertible and needed this to code them and after a few clicks I was all set 🎉

@dillonmckay3364 2 года назад

This is currently working on windows 11 x64 on my brand new HP laptop. The only issues I had and someone else might be having if they are trying this on a newer operating system is; 1. Windows 11 requires secure boot and digital signing for drivers, these have to both be disabled to run the command prompt command in this video. and 2. After selecting "have disc" the options I had to choose to make it work were different than the ones Evan used. I used to live in the stone age using NCS Expert on my old win xp laptop and thank god for PA Soft/ bmw scanner 1.4/ it's way easier to use

@lachlanmoloney6396 2 года назад

I was having the same issues, thanks for this comment

@Alexander_l322 Год назад

What options did you pick?

@subhodyuti 3 года назад

Worked like a charm !!! Great stuff man

@marcus3128 3 года назад

Awesome, thanks for this, I plan to try this soon. I threw my dongle across the room last time I attempted this so hopefully that's not broke lol. edit: Very good tutorial, a couple issues I had and how I fixed it to hopefully can help someone else: The command requires secure boot to be disabled so you'll have to change that in the BIOS first or you can also hold shift when restarting the computer and in troubleshoot > advanced you can disable driver verification. The software linked will not work unless it's plugged into the car and the car is on. Hardware Faulty DOES NOT mean the cable is bad. I recommend trying that first before buying a new one. I doubt it's the cable, I've thrown mine across the room and it's fine. Good Luck

@makveldz 3 года назад

This helped, thank you

@makveldz 3 года назад

Thank you very much, it worked perfectly

@iljakudrjavtsev1292 2 года назад

Thank You very much! You are the real MVP!

@StreetRocketJoe 3 года назад

Best bmw diy channel on RU-vid.

@EvanGoyuk 3 года назад

Lol I wish

@StreetRocketJoe 3 года назад

@@EvanGoyuk I think you do a great job on the diy and coding side of things.

@TheOnlyRaceEngineer 2 года назад

SUBSCRIBED. Great introduction to BMW scanner

@exorcist1998 3 года назад

Brilliant video - many thanks

@erickgruis106 4 месяца назад

Amazing video! Just the right amount of details, not a bunch of random fluff or ranting, all of the information needed. Great job and thank you!!

@blastinblanks9792 3 года назад

This is gold my g. I appreciate the break down on this cause recently my e36 ews went out of sync and im sure this will be the fix

@EvanGoyuk 3 года назад

Yes it will be!

@zdiddy456 3 года назад

Did this work for you? I'm trying to do some coding on my e36 so I can fix my CEL from doing a manual swap and it is a bitch trying to get DIS to work.

@blastinblanks9792 3 года назад

@@zdiddy456 im still waiting on my cable I’ll let you know tho

@zdiddy456 3 года назад

@@blastinblanks9792 thanks bro. if this doesn't work I can probably help you bypass ews another way.

@randyfleet9968 3 года назад

@@blastinblanks9792 The cable from the computer to the scanner module is the same as a printer cable!

@operarter Год назад

I installed the driver according to the description in your video. Device manager shows the driver without error. However, when I started the bmw scanner shortcut, it gave me the error message "hardware faulty". After I connected the scanner in the car, everything worked as it should. Thank you.

@DerKopfsammler666 3 года назад

Holy shit! I have the tool but I thought you could only check some stuff with it, I didn't know you could program with it as well... xD This is gonna make things so much easier!

@desvest 2 года назад

Hi Evan, when I try to update the driver, it says that the hash has been manipulated and cannot be updated. Did you know what it can be?

@dokterkarel 2 года назад

holy shit this actually worked. I tip my hat to you, kind sir!

@GregoryEsman 2 года назад

Thanks for sharing. This is really powerful! I have an E39. Will this other cable work for my car? Is this software able to recode ABS Modules from other cars to mine?

@franciscomourao7395 2 года назад

Hello Evan! Nice video, I've bought just now bmw scanner Can it disable the cold/warm light checks? Deactivate canbus?

@mitchelessang3645 2 года назад

I followed your instructions to a T and got everything to work 1st try with no issues on my 97 540i. Laptop I'm using is windows 7

@gustavopaschoal7882 3 года назад

Before I buy the scanner can you tell me if it is compatible with the bmw e36 323ti with the ecu ms41?

@MPower328 2 года назад

i have a question, what kind of obd connector do you use or what kind of cable works with the bmw scanner

@antonisdiamantis970 Год назад

Hi there Evan. I have a question regarding the cable used with the BMW Scanner software. Clicking your link to buy the cable, comes up with an option that in the item description states that it has to be used with Windows XP. Searching about the same cable in EBAY, because I live in Greece I find that the most if not all cables also say to use with Windows XP. Will there be any problems using Windows 10, as u do? Thanks!!

@xxobeysiscoxx 3 года назад

Can you use this scanner for Pre-Facelift BMW’s such as ‘00 328ci ?

@barigaValer4ik Год назад

Thank you! very useful guide! One remark: if you try running the program after installation and it will show an alert about hardware failure, then don't panic. The first run of BMW scanner shall be done when the cable is connected to a car. I tried for myself. everything is working

@redfive6020 Год назад

Hey how did you download the software i cant find it

@barigaValer4ik Год назад

@@redfive6020 there is a link to google drive folder in the video description.

@redfive6020 Год назад

@@barigaValer4ik i see it but which one do i install bro. Im not that computer smart😭

@barigaValer4ik Год назад

@@redfive6020 In the Google Drive folder there is an archive "hardware faulty BMW Scanner v140 Install.rar" You need to unpack the archive (using WinRaR or 7-Zip) and run the installation file.

@redfive6020 Год назад

@@barigaValer4ik got it thanks but now when i paste the code in command prompt as administrator it says 'An error has occurred setting the element data' any help?

@steph4289 3 года назад

Evan great instructions but I have a problem. The Live Data does not work everything else works. Any suggestions??

@davemcleod6093 2 года назад

Hi Mate followed this guide a couple times and has always worked now I'm on a make with paralles running Windows 10 pro, I cant seem to get this to work install the software no problem and connecting the scanner shows in other devices. but when restarting in test mode I can't get the drivers to install just point blank refuses. any Idea's to whats going on?

@pank0ne 3 года назад

Appreciate the tutorial but in the Google Drive there is only one archive without the driver's folder there?

@djlakota8907 3 года назад

Hey bud, I'm trying to install it on a Win8.1, which it worked a year ago, but now saying cant find Drivers, where do I find the bcedit part, or is it a different command?

@1Gizmo1991 2 года назад

Everything seems to install fine but I don't have an icon on my laptop to get into the program of the scanner. big help would be greatly appreciate it! thank you!!

@andrewr6861 Год назад

Thank you. I know very little about computers and got stuck a few times with the command prompt i had to change safe mode in the bios to get it to work.

@lsd25records 3 года назад

Hey man... off topic .. do you have a video on the DSC delete-disable ?? I had the issue that i thought i couldn't fully turn off all elements of that system.. always had the brakes chattering .. throttle not responding etc from spinning wheels drifting etc.. I thought it was artifacts left over from my auto to 5 speed swap.. but no the magic hold the DSC for 12 seconds and boom ... fully disabled .. went and did all kinds of donuts yesterday with the wheels spinning freely... do you have a video on this issue ?? or could you do 1 ??? Keep it up man.. note: We live off of junkyard parts and rock-auto ... Dynamic Stability Control The Dynamic Stability Control (DSC) automatically controls braking and engine torque in conjunction with systems such as ABS and TCS to help control side slip when driving on slippery surfaces, or during sudden or evasive maneuvering, enhancing vehicle safety.

@thomaskelly5886 Год назад

help. ive done exactly what you say and drivers look fine but it still comes up and says no drivers installed. do i need to connect to car before opening? or is it something else

@waynetaylor2784 2 года назад

Is it able to clear cog warning light ? My auto transmission is in limp home mode ?

@afbryant1964 Год назад

Great job

@valentinvasilev9491 2 года назад

Just bought the scanner and I’m trying to enable optical and acoustic lock/unlock, but when I enable DWA/DWA int. Sensor and tilt alarm sensor, my alarm goes crazy. So my question is - Can I enable only DWA + optical and acoustic lock/unlock, will it work? Thanks in advance Evan

@susanjecks4208 Год назад

can you change the vehicle order with bmw scanner 1.4 ? aka delete module

@CATPLAYING 3 года назад

Do I have to get a bmw scanner that is compatable for windows 10 (I have windows 10) or can I get one for windows XP, since I wont be using the files that come with.

@michaelhindman1897 3 года назад

Before you put your computer in test mode you say to connect scanner, and you open the software to the homepage of it but mine just pulls up a page that says device not connected as doesn’t allow me to do anything from there, second the part I’m supposed to enter to put my computer in test mode also won’t work even after restarting, so the rest of it I can’t do like installing drivers, if you could please help me out a bit on what I need to do that would be very helpful thank you!

@EddieAries323 2 года назад

Where do I find the folder with the drivers for windows 10, please advise, I don't see that one at all. Thank you

@nhlanhlamagagula7467 3 года назад

Thank you for the great tutorial, I was unable to install it on W10, may you please have detailed tutorial on diagnostic and programming for both PA 1.4 and Inpa...Thank you

@EvanGoyuk 3 года назад

Sure, I already have one for inpa

@vulcanicberlin 3 года назад

Is there a version without Hardware Faulty message or is this normal that it appears when not connected to the car?

@user-mr1fe5rm9l 2 года назад

Hi, my Windows Pro is 20H2, which drivers i have to use?

@kayakdocphil Год назад

Can I use the recommended BMW Scanner 1.4 with Windows 7? Any chance of posting the windows 7 32 bit drivers? Thanks.

@katherinej51679 Год назад

I think something might be missing from the Google drive linked below or maybe I’m just that tech impaired. When I click the software link it shows Folders and there is only one. It’s BMW Scanner 1.4.0-driver 64BIT but I don’t see the one with the installation wizard.

@iancurrie186 2 года назад

Hi dude. I just watched your how to video then purchased the scanner. It says to use with Windows xp. My question is do I still need to download the driver if using Windows xp.

@cee4903 2 года назад

yes I have the pa soft 1.4.1 but i am running windows pro 64 bit can't get the cable to work can you help me?

@shawngosnell1377 3 года назад

One more question Evan, did you have a piece on double blink coding for hazard lights?

@EvanGoyuk 3 года назад

Yes using ncs expert

@naterockwell7735 Год назад

What is the version number for the E90x models. I have an E90x model and would love to get this software. Btw… great content!

@EddieAries323 2 года назад

Where do I find the linked software? I don't see them. please advise. thank you

@danielg3777 3 года назад

If you have an air bag light can you reset that with this? I think due to previous owner removing seat before disconnecting battery.

@EvanGoyuk 3 года назад

Yes, but if a sensor is bad it will not fix it

@kyleshpak9286 Год назад

Which BMW scanner would I need for a e36?

@steph4289 3 года назад

Installed it following your directions and my Live Data does not work on a modules Any suggestions?

@appsupport9871 3 года назад

Hi please can you do a video on navcoder as well.. Appreciate it bro.

@placebothatnocebo5902 Год назад

Can you change odometer from km to miles with this software? Many thanks for the upload and the help!!

@amordzali 2 года назад

where i can download drivers folder you are using it?

@brucequan8742 Год назад

I want to be sure this will work before I buy all the scanner and cables. I currently have 2 problems and I don't want to go to the dealer for simple things. I lost my "AUX" option on my radio can I use this to turn it back on? Will it also allow me to fix the Transport mode problem? My battery went dead and it turned locked a bunch of stuff out. Thanks

@dougfitzgerald3730 Год назад

Will this software work on my 1998 BMW Z3 manufactured in 11/97?

@mandips007 Год назад

Hi - great video. I have windows 11. Will I be able to get this to work? many thanks

@KC97220 Год назад

Is there anything wrong with using the CD included with the scanner?

@Steve-yg8rk 2 года назад

hi Evan help , downloaded your file for the software from your google drive BMW Scanner 1.4.0-Driver 64BIT-20210823T180247Z-001 but when i double click that folder i get another folder folder that says BMW Scanner 1.4.0-Driver 64BIT then when i open that folder iget various folders and files but no install

@pruidzev 2 года назад

Thanks fot video, I was able to install drivers, but program was not connecting to car, in my case I have BMW e46 2004, I soldered 7 and 8 pins together, this was fix.

@ThinkLessBuildMore 10 месяцев назад

Can you link saddle to a 20pin -> OBDii?

@cypriotbee8366 Год назад

After i fixed non start my spare key no longer opens car via remote also is it normal for it not to fit in obd port as ut kept dropping out

@ttstudio7917 2 года назад

i think i installed it properly, it opens up drivers are installed scanner is connecter, everything seems fine, but it tells connection error with ike then connection error with ews and doesnt recognize car at all, can you help me whats the problem? and how i can fix it

@TheGoat350 2 года назад

Just received the scanner package. Was wondering why we shouldn't use the software that comes with it?

@danielocallaghan8517 3 года назад

Hi, I hve installed exactly following the instructions and it works but car id just shows vin and kms , nothing else about my car? its completely blank ? I can scan ok and clear errors etc, I have and E46 Convertible 2006 330CI Auto , Euro spec, in Australia ,Its the Highline , Msport ,which is probably similar to the US version ZHP, but without the extra horsepower , mild cam and a few other features , any ideas would be greatly appreciated , Thanks .

@EvanGoyuk 3 года назад

Email me a picture or message me on Instagram @evangoyuk

@465painkiller465 Год назад

I've done all this but when I open the programme it says "Hardware faulty". I can see that drivers are installed and that the programme detects the cable when I plug it in. But instead of launching the programme i get the error. Any help?

@bikerider1905 3 года назад

On your google drive I do not see the 4006kb file for "BMW Scanner v1.40 install" which is shown in your video.

@RMAJGaming 3 года назад

yeah im having that same issue

@corteman 3 года назад

So it should be no issue to install on my old Windows XP laptop where I have INPA installed?

@EvanGoyuk 3 года назад

Correct

@Sp3NgL3R_MF 2 года назад

Item on amazon is not available any more where can i get it ?

@Fredthebread5666 3 года назад

can you send a link on the drivers for the windows 10 pro, because i cant really find them inhere.

@EvanGoyuk 3 года назад

Linked in the description to google drive

@zoomiesRMS Год назад

I keep getting "Device Drivers are not installed" when trying to open the program, and I have done this many times now. Not sure what I'm missing, help would be greatly appreciated!

@dopo5810 Год назад

Same here, no fix, continuing search...

@damianbiay2162 3 года назад

Hi can i make valvetronic adoption with this program?

@GregGarland53 2 года назад

Hello Evan, I have tried to install the drivers 3 times.and will not work. Thinkpad T530 windows 10 "HELP"

@lornejaques8076 2 года назад

Can I delete transport mode with this software

@motokid032 3 года назад

I didn't catch or read anything about the 20 pin connector? Plug directly into the 16 pin and go?

@EvanGoyuk 3 года назад

Depends if your car has a 20 pin you need to use it

@hugog2122 2 года назад

Is this possibly not working for me because of s mode on my computer?

@darrentrishsummers 5 дней назад

Hi Evan. Thanks for the video. I clicked on the link to the google drive and could see the driver and notes file, yet couldn't see the bmwscanner V140 install program that you referred to. What am I doing wrong?

@alb934 Год назад

Where's the download for the program itself, not the drivers? Also does it work with bimmergeeks cable? and does it work on Windows 11?

@danielobrien7281 2 года назад

E53 also I have an x5 tried elm and creader 3100 can't get in

@vincentgarza5408 3 года назад

Can this do a EWS delete for ECU , or do you know any software for coding for burble pops and rev limiter etc for 2001 330i

@EvanGoyuk 3 года назад

Watch my latest video! I show how to delete ews

@vincentgarza5408 3 года назад

Just seen this such a weird timing when I exactly needed it lol thanks

@darkoz1692 2 года назад

Hey Evan, I know it's been a while but the download link for the Driver's is missing, any chance of uploading it here? EDIT - Sorry., I just realised I'm blind and didn't see it, thanks for your vids much appreciated.

@drmaglocks 11 месяцев назад

Did this on my stationery pc, worked fine. Tried on my laptop but i only get ”device drivers are not installed”. Looks good in device manager. Help?

@snarkzygames377 3 месяца назад

Same here... did you find a solution?

@drmaglocks 3 месяца назад

@@snarkzygames377 i got it working with another install method. Dont remember which one now though..

@gianniscain8417 3 года назад

Hello evan. Thank you. I followed the steps exactly. I even have exactly the version of your windows. I get bmw scanner (com 3) in port com & ltp) without yellow marks and no errors nowhere or usb serial ports marks etc. All good. But when i open the bmw scanner app it still says drivers are not installed. Do you have any idea what is happening?

@EvanGoyuk 3 года назад

What does it say under device manager for the cable, do you install the driver twice like in my video

@alfredomezquita 3 года назад

Same here @Giannis cain. Have you been able to sort it out? I have Windows 20h2 version

@gianniscain8417 3 года назад

@@alfredomezquita hi man. I didnt look out for it yet. I tried one or two tricks and got stucked. Again thanx to evan for the help but i dont have time for it right now. Guess i will go with carly if i want this in the future.(I only wanted to code my turn signal lights to flash when i lock) This stuff should'nt be so complicated :/

@emiljanocakalli8532 3 года назад

@@EvanGoyuk the same thing for me.what is the problem?

@redfive6020 Год назад

Can anyone help me install it? I get confused on how he got the folders in the start menu

@modestasbanisauskas8794 3 года назад

Hey man, You making great content, thanks! If You have installed INPA on Your PC, and then install BMW scanner with all drivers. Is INPA still works on same PC?

@EvanGoyuk 3 года назад

Yes!!! I have them both installed and everything works

@exorcist1998 3 года назад

What version of Windows 10 are you running. My one has the problematic 2004 build but I don’t want to bring it online to update it

@EvanGoyuk 3 года назад

I’m on 1803

@EvanGoyuk 3 года назад

Here’s the fix for 2004: www.e46fanatics.com/threads/installing-bmw-scanner-1-4-pa-soft-drivers-on-windows-10-build-2004.1282781/

@exorcist1998 3 года назад

@@EvanGoyuk Is there a chance you could do a video on installing it on the 2004 build ? I bet there are 1000's like me who simply cant get their head around that above guide ?

@carldb7374 3 года назад

Another very informative to the point video. Thanks. Is there anything like this tool for e90"s?

@EvanGoyuk 3 года назад

There is pa soft for e9X

@carldb7374 3 года назад

@@EvanGoyuk Thanks. Can you direct me,, link?

@EmmaBudak 2 года назад

Hi , Can you check 02 sensors and vanos …? Thank you .

@EvanGoyuk 2 года назад

Yes

@antifa86i35 Год назад

can I relearn parts with this tool ?

@tresdelengua 2 года назад

Where can I find a legitimate download of the software?

@aldinhasanovic7253 2 года назад

Can someone help I did everything he did everything worked until after I took it out of test mode (did not restart my computer because he did not either his was still in test mode) but it pops up as hardware faulty