BMW INPA NCS Expert WinKFP Tool32 Windows 10 Install

Подписаться 394

Просмотров 105 тыс.

50% 1

How to Install BMW Tools including INPA, NCS Exper, WinKFP, Tool32 and more using BimmerGeeks Standard Tools & K+D CAN Cable on a Windows 10 Laptop. Installation Instructions:
1. Login to your laptop using an Administrator account
2. Open a browser, search for "bimmergeeks download" on google and click the first link, then click "standard tools".
3. Download the BG Standard tools 7zip file, then download 7zip 64 bit and unzip the files.
4. Right click "St212.exe", select "Properties", then click the "Compatability" tab and select "Run in compatibility mode" under the section box below make sure it says for Windows 7 and click ok.
5. Run "st212.exe" Using all default settings except the 4 checkbox options in the "select additional task" window regarding "backup and restore" and "create desktop/quick launch icons" .
6. After install completes, select "No, I will restart later" to restarting PC.
7. Navigate to your C:\ drive and delete the folders labeled "EC-APPS, EDIABAS & NCSEXPER"
8. Replace those folders with the "EC-APPS, EDIABAS & NCSEXPER" from this download by copying them to the C:\ drive.
9. Copy the 3 files inside the OCX folder and paste them in the C:\Windows\Syswow64 folder.
10. Open Command Prompt as administrator & enter the following commands exactly as written below:
cd c:\windows\syswow64
(Press Enter)
regsvr32 mscomctl.ocx
(Press Enter & wait for "Registration Succeeded" message)
regsvr32 msflxgrd.ocx
(Press Enter & wait for "Registration Succeeded" message)
regsvr32 comdlg32.ocx
(Press Enter & wait for "Registration Succeeded" message)
11. Place the "BMW Tools" folder(BMW icon) on your desktop. Shortcuts to all the software are inside.
12. Make sure your cable is set to COM-1 with a Latency Timer as 1 in device manager.
13. Reboot Computer.
14. Login again and open BMW Tools and you are ready to start using the programs.
For educational purposes only, perform at your own risk. If you are not sure what you are doing you should consult an ASE Certified BMW Technician. Copyright CycleVIN L.L.C. 2019.

Авто/Мото

Опубликовано:

6 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 384

@shaazy 3 года назад

Massive props to you for making this! First timer with INPA, diagnosing a misfire/injector issue that only happens when vehicle is warm. Just replaced all ignition coils with Eldor so I know it's not that. Car starts normally too. Only starts hesitating when warm and under load. So this is a major help!

@edwardxxxxxxx 4 года назад

Thank you! Your instruction was the best from any other videos online. Successfully installed and ready to use for my car.

@brianw338 4 года назад

Thanks for doing this. Love your straight forward common sense explaining and ditto with your responses to comments/questions

@cyclevin159 4 года назад

No problem, enjoy!

@moonboost8199 3 года назад

110% the best friggin video for this, everybody else that I've tried to follow was so discombobulated that I couldn't get anything to work. Step by step instructions were super clear, I got it working in like 15 minutes where the past two nights I couldn't get the bloody thing to work.

@bentremy 4 года назад

You sir are the man. I can't thank you enough for this tutorial.

@cyclevin159 4 года назад

No problem, have fun playing around with your vehicle

@UMepher 4 года назад

Holy cow, great vid, thank you! I can't believe how many unhelpful turds on the forums say this stuff is "straight forward" to install and get all rude when people ask installation questions. It is doable, obviously, but downloading from a somewhat obscure site, installing in root of C: drive, deleting and copying directories, changing com ports, and doing anything in an admin command shell, is pretty much the opposite of :straight forward." Thanks again, can't wait to get my cable and spend a little time with my new e46.

@cyclevin159 4 года назад

No problem, enjoy playing with your car!

@capeofstormz5974 3 года назад

You are the best! Was about to get rid of my Dcan cable after 3 failed attempts. Thanks 😊

@KKE1978 4 года назад

Whoever you are you are the man. Easy straight fwd and articulate. Thanks bruh I was able to install this on windows xp pro. The only change was the cmd for .ocx in xp. Thanks I would buy u a beer.

@cyclevin159 4 года назад

Thanks we just used the software to monitor transmission temperature when doing a fluid drain and refill recently, saved us thousands hopefully the same for you as well.

@rudolphrainmaker6560 2 года назад

Thanks, your guidance is still relevant…and very helpful!

@adrianqerimi 3 года назад

Thanks its works for me i testet more downloads and totorials the only from you worked. I have coding my new injektors at my 335 n54. greetings from Germany.

@CroKris100 4 года назад

Thank you so much :) finally an instruction that works on win10

@cyclevin159 4 года назад

No problem, enjoy!

@RahulKumar-iv4ny 4 года назад

Your tutorial was perfect and on point. Thank you!

@cyclevin159 4 года назад

No problem, enjoy playing around with your car.

@bonda_racing3579 4 года назад

Hey do I have to be logged in as a administrator account?

@ismaelelkherchi2629 4 года назад

thank you so flippin' much holy guac there is no fuzzing way, you are the goat

@cyclevin159 4 года назад

You're welcome enjoy!

@tousseefharoun2746 4 года назад

Thanks man that worked perfectly for me 👌

@cyclevin159 4 года назад

No problem!

@FLALadybug 3 года назад

Thank you very much for making this video in a way that simple & easy to understand. I have a 2007 BMW 328i & I’m trying to work on it myself after my 2016 VW Passat was totaled. However , after I let it sit for abt 6 months, with no battery power, the steering column locked up & I was told to get the cable, software & use my laptop to unlock it just to get the engine to turnover. (Push to start). If you have any important advice besides o not brick my Bimmer, I’d appreciate it! Again thanks for the video, you’re awesome!!!

@nataliacoates9379 4 года назад

That worked perfectly!!! Thanks!!

@cyclevin159 4 года назад

Anytime sista! Enjoy messing around with your car =)

@odgtheharp 4 года назад

Did you get it in English

@ni3k777 4 года назад

Thank you for the guide! Where did you buy your K+DCAN Cable? I want to get a compatible/functioning item

@cyclevin159 4 года назад

No problem, we got our cable from BimmerGeeks.

@nicholascummings6803 4 года назад

Got it working , thanks so much awesome tutorial

@cyclevin159 4 года назад

No problem enjoy we just used it to code some new injectors the other day, saved us thousands.

@isaiahross5067 3 года назад

Hello I installed everything as instructed but for some reason I can’t edit the settings in the INPA cable any hints? It hasn’t installed the driver on my computer but my computer is fully up to date

@WFO211 3 года назад

New to this. All I want to do is cycle the ABS pump to do a complete brake fluid flush. I think I can basically bleed the brakes then do again while cycling the ABS pump. I have an e92 M3. Will this software work for that?

@djperdurabo5919 10 месяцев назад

Thank you so much for this. You're the best!!!

@claw1770 2 года назад

Great help, huge thanks for all the info

@rosstrilsbeck6429 4 года назад

Hi, CycleVIN do you recommend a lap top dedicated to the BMW Tools (INPA, NCS Exper, WinKFP, Tool32 ) or can they be added to a laptop that's used for other purposes/programs.

@cyclevin159 4 года назад

That's up to you, we actually use ours on an old laptop that we use for other stuff as well.

@beniaminirimita523 4 года назад

Big like 💪thank YOU🙏🏻

@joshhdtx 3 года назад

hopefully you're still on here. i installed this on my windows 10 laptop. install went flawlessly, but the problem i'm having now is that inpa will detect the cable, but says ignition is off even if the ignition is on or if the car is turned on.

@EliabLemus 4 года назад

Great video! Thanks a lot.

@cyclevin159 4 года назад

Thanks & No problem

@waleedahmed7064 4 года назад

Great instructions, thank you for posting it, bless

@cyclevin159 4 года назад

No problem, God bless you too!

@MrTrisse94 3 года назад

Installed using this video. Getting the DSC module for my bmw E90 in German, is it anyway to get in English?

@giorgiovitali4591 4 года назад

hello, ask for clarification about the d-can. cable pin 7 and 8 must be connected for bmw 10/2007 and 92?

@cyclevin159 4 года назад

If you have a K+D CAN cable the switch should be to the right for your car.

@ervinhorton7072 3 года назад

Thanks for the help!!!!

@ksaleem11 4 года назад

thanks for the great video! I've run into an issue though. my INPA seems to be in German?! Is there a way to switch to English? Installation and set up went like a charm, and the software does connect to the car, but i can't really do much since i cant tell what the options are. trying to bleed the brakes on my e90.

@cyclevin159 4 года назад

This free version is in German. Use Google translate otherwise you can always pay for the BimmerGeeks ProTool.

@ondrejslezak3295 3 года назад

if i instal the program and dont have cable yet, can i reboot computer or i have to wait to install cable and then reboot computer ? thank you

@BimmerM5e39 4 года назад

I've used this once to code injectors MSD80/1, tried it again and all im seeing is idle speeds under injector flow. Maybe disconnect the battery?

@cyclevin159 4 года назад

Here is a video that walks you through how to code injectors on an msd80/1 ecu: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zb4CdXq-8RE.html

@littlelionman9590 4 года назад

thanks man , wich obd2 cable is the best to order for connect my bmw e46 2000

@cyclevin159 4 года назад

BimmerGeeks K+D CAN Cable

@bmwdiy 4 года назад

Nice tutorial thank you, I just retrofitted the Sport Automatic Transmission in my 2008 E60, how can I use this software to code the ECU?

@cyclevin159 4 года назад

You might need ISTA-P for programming the ecu, or the BimmerGeeks protool may be able to.

@sanjaykarl3005 3 года назад

Excellent. You rock.

@TheVoldas86 3 года назад

Thank you! 👍

@zypperneck 2 года назад

thanks for the video. Question, after install it connects to my vehicle but everything is in German??? I think. any advise on how to solve?

@cjfordd 2 месяца назад

What about if using an ethernet obd not usb ? Still do device manager part ?

@timmuhieddine9629 4 года назад

Install went great, double checked my steps and for some reason getting "Error opening error log file---->Abort !" when I try to launch INPA after restart??

@cyclevin159 4 года назад

Not sure try contacting BimmerGeeks and see what they say

@flybywirekennel Год назад

My FRM module was repaired by a tech guy, probably he does not paired with CAS and my car now does not start, how would i know if there is issue in the FRM module?

@alican-ox6ds 3 года назад

ur the best of the best....

@eduardocrispin8837 4 года назад

it workssss.... thank youuuuu

@cyclevin159 4 года назад

No problem, just used it to bleed the brakes and flush the coolant. Enjoy!

@luky1509 3 года назад

Please help me : Run INPA and : ApiInit: Error #135 API-0015: HOST COMMUNICATION ERROR API initialization error No API call possible!

@kameranlhoni410 4 года назад

For using INPA can i connect the computer to the car via OBDII (Bluetooth), I don't have have the cable (and hard to get it delivered at this time (COVID 19 , and living in Iraq).

@cyclevin159 4 года назад

No you need a K+D CAN cable to connect your laptop to the car as far as I know. Some of the newer phone apps can use a Wi-Fi dongle.

@robertjohnstone4150 4 года назад

Excellent video thank you very much

@cyclevin159 4 года назад

No problem, enjoy working on your car.

@SairusBliss 2 года назад

When downloading the file it says failed system busy after attempting to “scanning” any thoughts?

@claudiurusu4432 3 года назад

Hi. Are the error messages displayed in English or German? Program language is English, but on some versions the error messages are in German.

@NatureandSpirit111 3 года назад

Nothing seemed to happen when I plugged in my cable but it does come up as a USB device and I did change it to COM1. It should work then no? Also the push switch: which position is K and which is D?

@cyclevin159 3 года назад

Switch to the left for older models and in between or to the right for newer ones.

@SzymonMelewski 3 года назад

Any ideas how to set this up for ADS? I got old XP laptop with serial port and need scan my E36 (pre obd)

@cyclevin159 3 года назад

No clue, if it's that old it may not be compatible.

@danieldatsov440 4 года назад

Thank you !

@cyclevin159 4 года назад

No problem enjoy maintaining your car without paying the stealership a fortune.

@carlosorellana200 3 года назад

Thank you.... you are the man on this shit!!!

@larryvelezbx 4 года назад

I followed your instructions and it worked as you described, one issue I am having is that I can not change the INPA.INI file in any way. Any changes are ignored and I need the R56 menu. Have you run across this issue?

@cyclevin159 4 года назад

We have not encountered this issue

@maximzadic9371 4 года назад

many many thanks bro

@cyclevin159 4 года назад

No problem any time brother

@friguy4444 2 года назад

Hokey CRAP! No one ever said anything in the whole set up when I've tried it the &898 thousand time before about running it in Windows 7 compatibility mode. Which makes sense because why would anyone make a version that actually just loads into the world largest windows version?? LOL. Anyway thank you very much for this video!

@digidandan 3 года назад

This should work as well with mini cooper r56, but when you open INPA it's not on the list. What I should do?

@cyclevin159 3 года назад

You need the F series IPO files. Check out this thread: www.bimmerfest.com/threads/inpa-on-f-series.698506/

@JosePerez-xe3wu 4 года назад

Everything works perfectly but winkKFP does not and I need it to change vin on my DME and advise?

@cyclevin159 4 года назад

You might need to buy the protool and default code the DME. Put a message out on the bimmergeeks Facebook forum and see what ppl say.

@lomedynationation23 2 года назад

i keep getting IFH-0010 error datatransmission to controll disturbed. i keep looking stuff up and solving this but nothing works, also ,error#95 sys0005 object file not found

@nickadams3958 4 года назад

Just wanted to confirm this is usable with the E60 and E9x chassis? I remember hearing they had a change of CAN somewhere in the 2000s.

@cyclevin159 4 года назад

It works on our E82 platform just fine, E6x and E9x models are listed in the main menu so you should be fine as long as you have the switch on your K+D CAN cable in the correct position.

@albaner0090 4 года назад

e6x and e9x until 2006 2007

@nickadams3958 4 года назад

@@albaner0090 I think you are incorrect since E9x started in 06-07...

@dainiuszienius9995 2 года назад

Is it enable to support E87 N43 engine?

@seanblaine3622 4 года назад

I am having an issue with inpa recognizing my M54 engine. It suggests the M56 but then it is in German. Any suggestions? Great video BTW.

@cyclevin159 4 года назад

You probably have a M56 DME, what year make and model is the vehicle?

@oeqs836 Год назад

Hello friend, I do everything step by step and finish up to step number 10. But the bmw icon does not appear. and I can't place it on the desktop. I'm doing it with your video on one computer and the whole setup on another laptop. I have gone step by step, I even copied the instructions or commands from your text file with the instructions, I verified each of the letters or characters and I can't get the BMW icon where the extracted files are. What I can do ????

@TheDOMinatingMC 4 года назад

Downloaded the bimmergeeks standard tools, where is the ST file? I can’t find it anywhere

@cyclevin159 4 года назад

After downloading you have to unzip the files with 7zip.

@MHTPRO 4 года назад

NCREXPER MISSING expert mode profile for coding? do you know how to add or where to find profile for it?

@cyclevin159 4 года назад

Not sure but you can always use expert mode in the BimmerGeeks ProTool App

@eightfivezerobraxton5509 3 года назад

thank you !

@justinzastrow607 3 года назад

I got to the end when your supposed to drag the bmw tool icon to the desk to but mine still says bmw tools as a folder not an icon.

@jackson95tattoos 3 года назад

Same u ever figure it out?

@justinzastrow607 3 года назад

@@jackson95tattoos yea I did, I ended up going back into the file I unzipped and rereading the introduction PDFs and I missed something. The instruction PDFs are the key read them all and follow them.

@renoir6900 4 года назад

do you know how to fix the error 704 "Assembly identification number not found in the files determined by xxkfconf.da2"

@cyclevin159 4 года назад

Not sure, maybe try doing it again...

@UsuallyOff 4 года назад

How do you get the st212 you skipped past the part where you unzip and where did those files come from mine only says bimmergeeks standard tool and won’t let me open it

@cyclevin159 4 года назад

If you Can't figure out how to unzip the files you probably shouldn't be using this...

@Sp3NgL3R_MF 2 года назад

when i copied in CMD i got error that it was loaded but also it was failed with some error code

@obxx1477 3 года назад

Once you get to command prompt how do you enter the command with c:\users\administrators? Because I can't get rid of that command. Thanks

@Hoetobeajew 3 года назад

right click on command prompt and open it up as an administator

@Winter1256 3 года назад

Hello sir, does inpa do CAS alignment?

@cyclevin159 3 года назад

Yes check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dSFvmDYvz4Y.html

@grizzlycali4508 3 года назад

There is no st212 in my download. Just BMW tools, ec-apps, ediabas, ncsexper. What do I do now?

@cyclevin159 3 года назад

Contact BimmerGeeks and let them know. They can send it to you directly.

@vytautas9565 3 года назад

Thank u sir

@Nico3dd 3 года назад

Hey dude! Awesome video. I want to say thabks first. I have a doubt though, Im trying to code the led tail lights from prelci to lci, and the video im following says i need to load this Revtor's ncs expert profile, or expert man if needed. how can i get those, or how can i add them to ncs expert profile list.

@Nico3dd 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uPmP1uQUX9U.html this is the link for the video FYI , min 16:35

@cyclevin159 3 года назад

@@Nico3dd it's much easier to do with the BimmerGeeks Protool.

@Nico3dd 3 года назад

@@cyclevin159 how can I use it? I'm new at this 😁😁

@cyclevin159 3 года назад

@@Nico3dd it's an app you can download it in the Google Play Store

@RedHandUniverse 4 года назад

when i go to type in the commands in the command prompt, it tells me 'regsvr32' is not recognized as an internal or external command. Any idea what this is?

@cyclevin159 4 года назад

Not sure make sure you followed all the previous instructions exactly, if it is still giving you an error contact BimmerGeeks.

@CoachKarin 4 года назад

right click on the command prompt and you will see where it says Run as Admin...then you should be good to go

@joncattle1541 3 года назад

I followed your video and installed the software smoothly. However, when my cable was plugged in at USB port, it was not shown in the Device Manager as "Port & COM". Instead, it showed "Other Devices" for which I cannot change port settings. Any comments on that? I work with Windows 10 pro. Thank you.

@cyclevin159 3 года назад

It may be due to your use of the Pro version of Windows. We used the regular version. Contact BimmerGeeks and see if they have any other drivers you can try.

@scotty-l8982 3 года назад

yo same issue did you get it fixed?

@alexanderresnanskyjunior.4065 Год назад

EXCELLENT. {NOTHING MORE NEEDS TO BE SAID ABOUT THIS VIDEO but the BimmerGeek version does have issues with E53 X5 and libraries may be damaged. I have not had time to verify this statement. Will update when I have a solution or proof.)

@Decrepit_biker 4 года назад

Followed everything to the letter, but when trying to use INPA I get the #135 API-0015 HOST COMMUNICATION ERROR API Initialization error No API calls possible

@cyclevin159 4 года назад

Try contacting bimmergeeks and see if they can offer some insight.

@ayaahuasca1004 4 года назад

Hey i followed everything but when i want to open Inpa it sais api32.dll missing... on win 10 64bit how do i fix?

@cyclevin159 4 года назад

Try uninstalling and reinstalling again.

@izoaky5643 4 года назад

Thanx mate, i tried it with windows 8.1 64 bit but always get the ERROR 126 Api initialization error Can someone help? Do i have to connect the cable with the car to get Inpa running?

@cyclevin159 4 года назад

This tutorial is for Windows 10, for Windows 8 you may need to contact BimmerGeeks and see what the install procedure is.

@deadmoney2093 2 года назад

Will this work for e92 n55?

@radeksebanek3211 4 года назад

THX!

@cyclevin159 4 года назад

No problem enjoy!

@agustin-tochimani 4 года назад

Hi, nice video, I am new to these tools and I am trying coding a bmw x3 2006 with a new battery different ah capacity. Do these tools work better under windows 7 32 or 64 bit version?, so I can set up my computer the right way. Thanks, and great job, and you got a new subscriber :).

@cyclevin159 4 года назад

Coding the new battery is very difficult with these tools, it is much easier to do it with the new BimmerGeeks Protool app.

@pinoysi06 4 года назад

I keep getting virus treatment from windows defender every time I try to install with st212?!?!

@cyclevin159 4 года назад

We use BitDefender so Windows Defender is turned off, BitDefender scanned the files and found no issues...

@teddyferguson1415 4 года назад

Thanks alot you are a freaking life saver dude. successfully reset my ews and got the car to fire after almost 3 months of being down

@cyclevin159 4 года назад

No problem glad to hear you got your car up and running without having to spend a fortune at the stealership

@danielpecina1385 4 года назад

I followed all these steps but it gives me error when I attempt to run job on inpa or tools32, "ecu service not supported" is the error on tools32 for frm short circuit counter job. I had a kDcan cable from Amazon and returned it and got one from bimmergeeks because I thought that was issue but still same error.Any ideas what it can be?

@cyclevin159 4 года назад

Not sure, try contacting BimmerGeeks and let us know If you figure out why.

@danielpecina1385 4 года назад

@@cyclevin159 issue might be because I don't believe standard tools comes with sp-datens files?

@tomihanhela1873 3 года назад

Could someone clarify where to open the command prompt, so do I have to copy those 3 files there? if so, how do i get them connected to it?

@cyclevin159 3 года назад

Click on the Windows icon in the bottom left corner of the screen and type in "command prompt" in the search box. Then follow the instructions in the video.

@tomihanhela1873 3 года назад

@@cyclevin159 It’s hard for me to interpret English from a video because it’s so bad for me. But then, I do get the command open but after that I no longer understand or can interpret what needs to be done. So did you copy those three pieces of data straight there, or did you write?

@valeriuchioaru177 4 года назад

After installing everything as in the tutorial, I connect it with the car, shows me that the cable is detected and ignition on. After entering the model n46 and the engine appears to me error Versions do not match. Possible malfunction! Press ok then I see the error Language variants do not match. Possible malfunction! Can someone help me? Thanks!

@cyclevin159 4 года назад

It says that for us too, just click ok and it should let you continue on to use the software.

@valeriuchioaru177 4 года назад

@@cyclevin159 Thanks mate!

@gwad_cranzybylmnprod3513 2 года назад

hello can i have the inpa software download link for windows 7 How much does it cost

@sonjarossouw1381 4 года назад

Hi its working perfect but there are only one problem .When I read the errors the results pops up in a other language how can I fix it ?It only happens when I read the codes .The rest of the app are in English

@cyclevin159 4 года назад

You can use the MHD App to scan and clear codes in English for free through your tablet or phone. All you need is an OTG cable to connect to your K+D CAN Cable.

@hamedmosaferi8520 3 года назад

Hey man, when it comes to the Command Prompt section. I try to type in the following commands but an error message opens up “the module was loaded but the call to DIIRegisterServer Failed with error code 0x8002801c.” Can someone help me?

@cyclevin159 3 года назад

What version of Windows are you using?

@liampersson8447 3 года назад

I get the same, i use windows 10

@hassankhalil401 3 года назад

Run the cmd as administration

@yusuphajarju4641 3 года назад

thanks for tutorial i have it install now. but am yet to have a cable can i do that later?. can i close the command prompt windows?

@cyclevin159 3 года назад

We waited until we got the cable, but you should be able to. Let us know if it works.

@yusuphajarju4641 3 года назад

@@cyclevin159 hi it works fine, after installing the software first. It took some days before I received the carble. I now understand the diagnostic area but the coding and programming is my problem.

@benhadhom 4 года назад

hi How to code AUX in bmw e63 (645cica modele 2004) by NCS Expert I found a lot of tutorials but the methods are different I can't get to know the ideal methods for coding (what is the difference between expert man profiles, revtor's ...)plz i need tuto thank you so much

@DB-px5gj 4 года назад

Marwen Hadhom I need it to!

@benhadhom 4 года назад

@@DB-px5gj here is a download link but i'm not sure about program reliability I haven't tested it yet www.bimmergeeks.net

@cyclevin159 4 года назад

Check out this video for NCS Expert Coding: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zf-7KVp3oU0.html

@giedriusvasilevskis6333 4 года назад

This diagnostic program not working whit BMW E39 525d? Car is 2003...

@cyclevin159 4 года назад

Contact BimmerGeeks and see if they can send you the file for your car

@DL-sy5fv 4 года назад

Thanks for this tutorial. I found a problem ... when i open INPA, press INFO, EDIABAS is not recognized Ini Path ????? Ecu path ???? Interface ?????. Do you know what can i do to solve this ?

@cyclevin159 4 года назад

Are you using a BimmerGeeks cable or an amazon/eBay one?

@DL-sy5fv 4 года назад

@@cyclevin159 amazon one. But i think this has nothing to do with the cable. Cable works and i tested with protrool.

@DL-sy5fv 4 года назад

If i open INPA - cable is detected