In this video, I do show how to install the battery cabling in the console of the Classic Boston Whaler 17. This install is a bit more complex than usual. I have also installed a battery charger, a switch and a battery isolator. My goal with this install was to be able to keep both batteries charged whether the boat is on the trailer or under power in the water. I achieved this through the use of the dual sense battery isolator. The switch is there in case of an emergency where I need to use the house battery to start the outboard.
The boat wiring I do in this video is mostly heavy gauge wiring. One of the challenges of installing the batteries a longer distance from the motor is having to increase the thickness of the wire. In this case, I used 2 gauge marine grade, stranded and individually tinned wire. and show exactly where I connect the battery to the Yamaha F70 outboard.
Here is a link to where I bought the 2 gauge cable and connectors at (as well as some other primary wiring). I am not compensated for this, they just have the best prices and customer service I've been able to find!
www.acdcwireandsupply.com
Here are Paid Affiliate links to some of the items I used in this video:
Heavy Gauge Crimper: amzn.to/43q7f8u
6 Gauge Wire and Lugs: amzn.to/42rnHER
Dual Sense Battery Isolator: amzn.to/3otaHk5
Zip Tie Mounts: amzn.to/43rYtqE
Please Visit my Amazon Storefront for more tools and Ideas:
amzn.to/3F2a7yD
00:00 Introduction
01:47 Running the Battery wire
03:00 Terminating the Engine Cables
05:05 Installing the Battery Switch
08:11 Installing the Battery Isolator
11:00 Connecting the Battery Cables to the Yamaha F70
12:15 Testing the Engine Wiring
#boat
#battery
#wiring
5 авг 2024
